Mplayer Turkish Subtitle Error

Hi everone.
Mplayer last update not showing Turkish characters.My mplayer config file;
[default]
vo=xv
ao=alsa
slang=en,eng,tr
font=/usr/share/fonts/TTF/DejaVuLGCSans.ttf
subfont-encoding=ISO8859-9
Thank You for help.

Solved my problem.My last config file;
[default]
vo=xv
ao=alsa
cache = 2000
slang = tr
alang = en
subcp = windows-1254
Last edited by SYSTEMEDIC (2011-03-06 11:18:01)

Similar Messages

Mplayer and VirtualBox error after installing ATI Drivers

I recently switched from the Open Source drivers for my ATI video card. Since that time some programs are refusing to load.
I switched to the Catalyst repository to install the new drivers for my card.
The specific error message I get when running the mplayer in the terminal is
mplayer: error while loading shared libraries: libdirectfb-1.4.so.0: cannot open shared object file: No such file or directory
the message for VirtualBox is
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/opt/VirtualBox/VirtualBox.so",) failed: libdirectfb-1.4.so.0: cannot open shared object file: No such file or directory
So far only 2 programs have been giving me this error are mplayer and VirtualBox.
I have tried reinstalling directfb and mplayer, but this doesn't fix things.
I have run ldd `which mplayer` and the following is missing
libdirectfb-1.4.so.0 => not found
libfusion-1.4.so.0 => not found
libdirect-1.4.so.0 => not found
I am running 64bit Arch.
Thanks for your help

Thanks
wonder wrote:LD_DEBUG=files mplayer > log 2>&1
After running that, I discovered that sdl needed to be rebuilt. Once I did that, everything works fine.
Last edited by floatingman (2010-09-21 13:12:10)

Improved subtitle error messages

When you import a subtitle text file, you can get the "overlapping timecode" error for a couple of reasons:
1. If the start time > the end time for a line in the file
2. If the start time of a line < the end time of the previous line
3. There is a syntax error in the timecodes, for example a space instead of a colon.
The first one is quite obvious to spot, as is the third, but the second one can be quite hard because the error box just lists the line where Encore thinks it has the error, rather than explicitly stating why it has flagged up the error. If Encore said something like "This line starts before the previous line ends", it would save a bit of head-scratching.
--Philip

Going to need a Lot more info to be of any assistance. As Sig said what OS is running in Fusion. What version of Fusion. What version of QB. Did it ever run. Do you have the network setup in the Fusion OS. Have you installed VMware Tools.

MPlayer + Xscreensaver = gnome_screensaver_control() Error

Hi all
well i guess many people know about the error, that if you select "Stop XScreenSaver" in MPlayer , next thing you want to play some movie, you get the gnome_screensaver_control() Error
Just wondering if theres a way to fix this, besides compiling again MPlayer whitout the gnome screensaver option : )
Any help is highly aprecciated
cheers

I think I'm going to create a new mplayer package which includes gnome-screensaver option.. Because nobody cares about this.. I also have this problem. And I can't watch any movies unless I close gnome-screensaver by killing it.

Mplayer ang Subtitles

Hello there....
I'm trying to watch a movie with greek subtitles... But i cant !!!
Here are my settings so far....
-There is no /etc/mplayer/config file
-I've edited ~/.mplayer/config and added inside
stop-xscreensaver="yes"
sub-fuzziness=1
font=/usr/share/fonts/TTF/DejaVuSans.ttf
#with subfont-text-scale you can change the size of fonts
subfont-text-scale=3
subcp="iso-8859-7"
and the file command for the srt file outputs
Prison.Break.The.Final.Break.WS.PDTV.XviD-iLM.srt: ISO-8859 text, with CRLF line terminators
The result is something like " ___π____ . .π "
Can anybody please help me??
Thank you very much

archkick, you are already told how you can remedy the problem, I just want to explain why.
srt subtitles may be in different character encodings, unfortunately a character encoding is not written in srt file. Some media players determine a character encoding by themselves, mplayer does not. So you should change "subcp" mplayer option to different Greek character encodings (including UTF-8 and other Unicode) until you get readable subtitles.
Last edited by beroal (2010-02-06 20:27:24)

Turkish character problem on downloaded subtitles

First of all I could not categorized this issue, so I decided to post to "MacBook Air" which I had problems with. I'm open to any advices about that.
Whenever I download a Turkish subtitle from web (using safari) I open it up on TextEdit app, and Turkish characters are replaced by other weird characters (ı to " for example).
Im using TextEdit's Find and Replace tool to overcome this. However, I still wonder why such a thing occur.
By the way, I use my operating system in English.

Thanks for your reply Raff.
Works Great. You will update the method.

[SOLVED] X11 error: BadAlloc (insufficient resources for operation)

Both VLC and mplayer are unable to display video (sound is ok). mplayer complains
X11 error: BadAlloc (insufficient resources for operation)
I am able to play the same file with
mplayer -vo x11
but no fullscreen with -vo x11 (which is to be expected), and I see no reason why the xv output should not work..
This is on Dell Latitude D530, intel GM965/GL960. I've switched to arch from gentoo, where it worked, week or two ago.
Any ideas what can be wrong?
Last edited by renergy (2014-09-28 10:13:03)

Have you tried any other video outputs? See 'mplayer -vo help' for the list.
Try mpv, mplayer's cousin.
Does it happen only with one file? Run mediainfo on it.
Edit: Are you using SNA or UXA?
Compare version numbers and configs of the respective packages of gentoo and Arch. Only what's to blame - the drivers?
Last edited by karol (2014-09-27 15:14:26)

Letters in turkish subitles

Hi,
I want to integrate turkish subtitles in my movie (no import). But whenever I use letters like ş or ğ, they will be only shown as a block – can somebody help me? I already looked at google, but I didn't find any solution ...
Thanks!!

For some reason, three Turkish characters are not supported in the CEA-608 specification. ğ, ş, and ı. These characters are handled correctly by captions using the Teletext standard, which is specifically for the PAL broadcasting standard; if you need to work in the NTSC domain, then you'll find that support for the CEA-708 standard, which also supports the full Turkish alphabet, has been added for the forthcoming update.

ITunes 11 cut my subtitles while playing fullscreen

Hi everyone,
I updated to Mavericks today and got this problem.
While I playing a movie without full screen, my subtitles are fine but If I play movie a fullscreen, iTunes cut my subtitles from the end of the movie frame.
First Image : I'm playing a movie with Turkish subtitle on my desktop screen and subtitles are fine.
Second Image : When I played a movie in fullscreen subtitles was cut from the end of the movie frame. (for eg. look at "Henry"s "y" letter.)
I didn't have a that problem before upgrading to Mavericks.
By the way, this black transparent frame is also new with Mavericks but I couldn't find the way to remove them.
Thanks in advance.
(Sorry for my English)

Well, it seems that didn't really work. You can set your own style, but unless you use a Small (or I assume, Extra Small) as the text size, the subtitle will cut off on a film with a smaller aspect ratio than 1.85:1. For example: Star Trek: Into Darkness (AR 2.35:1) cuts off the subtitle below the film frame if the text size is Medium. Before Mavericks installation, subtitles for 2.35:1 films used to appear below the film frame in the black area; now they are in the film frame and cut off if they are two lines and text size Medium.

Upgrading Hyperion applications from EPM System 11.1.2.1 and 11.1.2.2. to 11.1.2.3

Hi,
I am triyng to upgrade Hyperion classic applications from 11.1.2.1 and 11.1.2.2 to 11.1.2.3. I restored application's databases which has SQL database and upgraded applications successfully. But the other applications that have Oracle databases, I can restore and upgrade the applications, but when I try to refresh database, it gives errors like that:
com.hyperion.planning.olap.HspVerifyOutlineException: Verify Outline failed with the following errors:
Error [100000800] detected in member "2012 Bakım": Shared member with no actual member
And it is only giving these errors for members which have Turkish characters. And it gives like as this error for member formulas which have Turkish characters:
Error compiling formula for [] (line 1): unknown member name ["Sözleşme Türü Belirle"] in function [operator @X]
This application is working in 11.1.2.1, but after I migrated it ot 11.1.2.3, it started to give these problems. I controlled my oracle database parameters and they look OK, I am sending them too:
NLS_LANGUAGE                   AMERICAN
NLS_TERRITORY                  AMERICA
NLS_CHARACTERSET               AL32UTF8
NLS_SORT                       BINARY
How can I solve this problem ?
Thanks
Mehmet

Hi Santy,
Thanks for your suggestion. We updated Turkish characters in DB then it's solved. When we create a shared member which has Turkish characters from zero, it gives no error while the refresh. And if we delete all shared members and create them again, it gives no error again. I think the problem is about upgrading.
Regards,
Mehmet

MP4 on a G3 iBook?

Hi
I'm trying to get .mp4 video files (on an eHDD) to play on an old 500MHz G3 iBook running 10.4.11 - they were originally converted from DVD using Handbrake, on a G5 iMac where they ran quite happily. The G3 has QT 7.6.4, plus Perian, plus VLC - but nothing will play the video. I hear the audio track but the video is just blank black. Normal DVDs play AOK.
Is there anything I'm doing wrong or must I accept that this machine is too old even for MP4 video?

No dice I'm afraid, BD. The Div-X installed QT behaved just as before,while MPlayer gave this error :
2012-02-07 22:01:57.876 MPlayer OSX[1287] Path to MPlayer: /Applications/MPlayer OSX.app/Contents/Resources/External_Binaries/mplayer_noaltivec.app/Contents/Mac OS/mplayer
2012-02-07 22:01:57.876 MPlayer OSX[1287] Arg: /Volumes/Music & Visuals/QuickTime video/The World At War/9 Stalingrad.mp4
2012-02-07 22:01:57.876 MPlayer OSX[1287] Arg: -framedrop
2012-02-07 22:01:57.877 MPlayer OSX[1287] Arg: -vo
2012-02-07 22:01:57.877 MPlayer OSX[1287] Arg: macosx:shared_buffer
2012-02-07 22:01:57.877 MPlayer OSX[1287] Arg: -slave
2012-02-07 22:01:57.877 MPlayer OSX[1287] Arg: -identify
dyld: Library not loaded: /usr/X11/lib/libfreetype.6.dylib
Referenced from: /Applications/MPlayer OSX.app/Contents/Resources/External_Binaries/mplayer_noaltivec.app/Contents/Mac OS/mplayer
Reason: image not found
2012-02-07 22:01:58.624 MPlayer OSX[1287] Abnormal playback error. mplayer returned error code: 5
Something to do with no Altivec?

Running mplayer at boot with systemctl. fails with alsa-lib error

I am running Arch ARM on a raspberry pi and would like to use it as a headless music player.
I am trying to run mplayer in slave mode at start up and have in read from a fifo pipe which I could write to over SSH.
I have written this mplayer.service file:
[Unit]
Description='mplayer service'
[Service]
ExecStart=/usr/bin/tmux new-session -d -s mplayer 'mplayer -idle -input file=/systemdservice/mplayerfifo /systemdservice/1.mp3 &> /systemdservice/mplayererror.log'
User=user
Type=forking
[Install]
WantedBy=multi-user.target
When I start this service with 'sudo systemctl start mplayer.service' I get the following output:
MPlayer SVN-r36285-4.8.1 (C) 2000-2013 MPlayer Team
Cannot test OS support for SSE, disabling to be safe.
205 audio & 424 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /systemdservice/1.mp3.
libavformat version 55.7.100 (internal)
Audio only file format detected.
Load subtitles in /systemdservice/
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 44100 Hz, 2 ch, s16le, 32.0 kbit/2.27% (ratio: 4000->176400)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1'
[AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM sysdefault
[AO_ALSA] Playback open error: No such file or directory
AO: [pulse] Init failed: Connection refused
[JACK] cannot open server
[AO SDL] Samplerate: 44100Hz Channels: Stereo Format s16le
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1'
[AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM sysdefault
[AO SDL] Unable to open audio: No available audio device
DVB card number must be between 1 and 4
AO: [null] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 0.1 (00.0) of 1567.0 (26:07.0) ??,?% [J
A: 0.1 (00.0) of 1567.0 (26:07.0) ??,?% [J
MPlayer interrupted by signal 2 in module: play_audio
A: 4.5 (04.5) of 315.0 (05:15.0) 1.7% [J
Exiting... (Quit)
mplayer starts within a tmux window but I don't get any sound and have to stop mplayer from within tmux with CTRL+C which ends the process.
interestingly when as user I run:
/usr/bin/tmux new-session -d -s mplayer 'mplayer -idle -input file=/systemdservice/mplayerfifo /systemdservice/1.mp3 &> /systemdservice/mplayererror.log'
it works perfectly.
If in mplayer.service I change the user to root it also works perfectly.
user is a member of audio group.
I am confused as to what is causing this problem which appears due to a limit of users audio group privilages when a process is started via systemd.
Any help appreciated.
Thanks in advance.
Last edited by epoynton (2013-10-30 21:44:43)

Have you tried setting the audio output driver for mplayer explicitly? See:
mplayer -ao help
I would try
-ao alsa
ALSA doesn't use /dev/dsp anymore I don't think. On a Pi you will also need to make sure the mixer is set with amixer like:
amixer cset #
You can use
aplay -l
to see the available device IDs etc.
Hope this helps.
Last edited by Minsc (2013-11-11 17:02:08)

[SOLVED]Mplayer error dialog

I get an error dialog after exiting mplayer.
The details in the dialog..
[matroska,webm @ 0x2269b10] max_analyze_duration 5000000 reached at 5002000
[matroska,webm @ 0x2269b10] Estimating duration from bitrate, this may be inaccurate
after closing this, i get an another dialog box..
MPlayer SVN-r33805-4.6.1 (C) 2000-2011 MPlayer Team
163 audio & 363 video codecs
Playing MediaFire4U.Com_HHP7.P1.Dd.mkv.
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0, united300.blogspot.com | 300mbunited.com | rapidpremium.net
[lavf] stream 1: audio (aac), -aid 0, united300.blogspot.com | 300mbunited.com | rapidpremium.net
[lavf] stream 2: subtitle (text), -sid 0, united300.blogspot.com | 300mbunited.com | rapidpremium.net
VIDEO: [H264] 640x272 0bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
Load subtitles in ./
==========================================================================
Forced video codec: ffmpeg12vdpau
Forced video codec: ffwmv3vdpau
Forced video codec: ffvc1vdpau
Forced video codec: ffh264vdpau
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264vdpau] vfm: ffmpeg (FFmpeg H.264 (VDPAU))
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 0.0 kbit/0.00% (ratio: 0->192000)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[VD_FFMPEG] Trying pixfmt=0.
Movie-Aspect is 2.35:1 - prescaling to correct movie aspect.
VO: [vdpau] 640x272 => 640x272 H.264 VDPAU acceleration
[VD_FFMPEG] XVMC-accelerated MPEG-2.
A: 7.1 V: 0.0 A-V: 7.147 ct: 0.000 0/ 0 ??% ??% ??,?% 2 0 [J
A: 7.2 V: 0.0 A-V: 7.110 ct: 0.004 0/ 0 ??% ??% ??,?% 2 0 [J
A: 7.2 V: 0.1 A-V: 7.106 ct: 0.008 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.2 V: 0.1 A-V: 7.069 ct: 0.013 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.2 V: 0.2 A-V: 7.033 ct: 0.017 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.2 V: 0.2 A-V: 7.010 ct: 0.021 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.2 V: 0.2 A-V: 6.982 ct: 0.025 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.3 V: 0.3 A-V: 6.966 ct: 0.029 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.3 V: 0.3 A-V: 6.961 ct: 0.033 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.3 V: 0.4 A-V: 6.956 ct: 0.038 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.4 V: 0.4 A-V: 6.951 ct: 0.042 0/ 0 ??% ??% ??,?% 3 0 [J
A: 7.4 V: 0.5 A-V: 6.946 ct: 0.046 0/ 0 44% 16% 1.0% 3 0 [J
A: 7.4 V: 0.5 A-V: 6.941 ct: 0.050 0/ 0 41% 15% 0.9% 3 0 [J
A: 7.5 V: 0.5 A-V: 6.937 ct: 0.054 0/ 0 38% 14% 0.9% 3 0 [J
A: 7.5 V: 0.6 A-V: 6.937 ct: 0.058 0/ 0 35% 13% 0.9% 3 0 [J
A: 7.6 V: 0.6 A-V: 6.933 ct: 0.063 0/ 0 33% 12% 0.8% 3 0 [J
A: 7.6 V: 0.7 A-V: 6.928 ct: 0.067 0/ 0 31% 11% 0.8% 3 0 [J
A: 7.6 V: 0.7 A-V: 6.923 ct: 0.071 0/ 0 29% 11% 0.8% 3 0 [J
A: 7.7 V: 0.8 A-V: 6.918 ct: 0.075 0/ 0 28% 10% 0.8% 3 0 [J
A: 7.7 V: 0.8 A-V: 6.913 ct: 0.079 0/ 0 26% 10% 0.8% 3 0 [J
A: 7.7 V: 0.8 A-V: 6.909 ct: 0.083 0/ 0 25% 9% 0.7% 3 0 [J
A: 7.8 V: 0.9 A-V: 6.905 ct: 0.088 0/ 0 24% 9% 0.7% 3 0 [J
A: 7.8 V: 0.9 A-V: 6.900 ct: 0.092 0/ 0 23% 8% 0.7% 3 0 [J
A: 7.9 V: 1.0 A-V: 6.900 ct: 0.096 0/ 0 22% 8% 0.7% 3 0 [J
A: 7.9 V: 1.0 A-V: 6.894 ct: 0.100 0/ 0 21% 8% 0.7% 3 0 [J
A: 7.9 V: 1.0 A-V: 6.890 ct: 0.104 0/ 0 20% 7% 0.7% 3 0 [J
A: 8.0 V: 1.1 A-V: 6.885 ct: 0.108 0/ 0 20% 7% 0.7% 3 0 [J
A: 8.0 V: 1.1 A-V: 6.881 ct: 0.113 0/ 0 19% 7% 0.7% 3 0 [J
A: 8.0 V: 1.2 A-V: 6.876 ct: 0.117 0/ 0 18% 7% 0.7% 3 0 [J
A: 8.1 V: 1.2 A-V: 6.871 ct: 0.121 0/ 0 18% 6% 0.7% 3 0 [J
A: 8.1 V: 1.3 A-V: 6.866 ct: 0.125 0/ 0 17% 6% 0.7% 3 0 [J
A: 8.2 V: 1.3 A-V: 6.867 ct: 0.129 0/ 0 17% 6% 0.7% 3 0 [J
A: 8.2 V: 1.3 A-V: 6.862 ct: 0.133 0/ 0 16% 6% 0.7% 3 0 [J
A: 8.2 V: 1.4 A-V: 6.858 ct: 0.138 0/ 0 16% 6% 0.7% 3 0 [J
A: 8.3 V: 1.4 A-V: 6.854 ct: 0.142 0/ 0 15% 5% 0.7% 3 0 [J
A: 8.3 V: 1.5 A-V: 6.850 ct: 0.146 0/ 0 15% 5% 0.7% 3 0 [J
A: 8.3 V: 1.5 A-V: 6.845 ct: 0.150 0/ 0 15% 5% 0.7% 3 0 [J
A: 8.4 V: 1.5 A-V: 6.840 ct: 0.154 0/ 0 14% 5% 0.7% 3 0 [J
A: 8.4 V: 1.6 A-V: 6.835 ct: 0.158 0/ 0 14% 5% 0.7% 3 0 [J
A: 8.5 V: 1.6 A-V: 6.830 ct: 0.163 0/ 0 13% 5% 0.7% 3 0 [J
A: 8.5 V: 1.7 A-V: 6.826 ct: 0.167 0/ 0 13% 5% 0.6% 3 0 [J
A: 8.5 V: 1.7 A-V: 6.821 ct: 0.171 0/ 0 13% 5% 0.6% 3 0 [J
A: 8.6 V: 1.8 A-V: 6.816 ct: 0.175 0/ 0 12% 4% 0.6% 3 0 [J
A: 8.6 V: 1.8 A-V: 6.816 ct: 0.179 0/ 0 12% 4% 0.6% 3 0 [J
A: 8.6 V: 1.8 A-V: 6.812 ct: 0.184 0/ 0 12% 4% 0.6% 3 0 [J
A: 8.7 V: 1.9 A-V: 6.807 ct: 0.188 0/ 0 12% 4% 0.6% 3 0 [J
A: 8.7 V: 1.9 A-V: 6.803 ct: 0.192 0/ 0 11% 4% 0.6% 3 0 [J
A: 8.8 V: 2.0 A-V: 6.798 ct: 0.196 0/ 0 11% 4% 0.6% 3 0 [J
A: 8.8 V: 2.0 A-V: 6.793 ct: 0.200 0/ 0 11% 4% 0.6% 3 0 [J
A: 8.8 V: 2.0 A-V: 6.788 ct: 0.204 0/ 0 11% 4% 0.6% 3 0 [J
A: 8.9 V: 2.1 A-V: 6.783 ct: 0.209 0/ 0 10% 4% 0.6% 3 0 [J
A: 8.9 V: 2.1 A-V: 6.778 ct: 0.213 0/ 0 10% 4% 0.6% 3 0 [J
A: 8.9 V: 2.2 A-V: 6.780 ct: 0.217 0/ 0 10% 4% 0.6% 3 0 [J
A: 9.0 V: 2.2 A-V: 6.775 ct: 0.221 0/ 0 10% 4% 0.6% 3 0 [J
A: 9.0 V: 2.3 A-V: 6.770 ct: 0.225 0/ 0 10% 3% 0.6% 3 0 [J
A: 9.1 V: 2.3 A-V: 6.766 ct: 0.229 0/ 0 10% 3% 0.6% 3 0 [J
A: 9.1 V: 2.3 A-V: 6.761 ct: 0.234 0/ 0 9% 3% 0.6% 3 0 [J
A: 9.1 V: 2.4 A-V: 6.756 ct: 0.238 0/ 0 9% 3% 0.6% 3 0 [J
A: 9.2 V: 2.4 A-V: 6.751 ct: 0.242 0/ 0 9% 3% 0.6% 3 0 [J
A: 9.2 V: 2.5 A-V: 6.746 ct: 0.246 0/ 0 9% 3% 0.6% 3 0 [J
A: 9.2 V: 2.5 A-V: 6.741 ct: 0.250 0/ 0 9% 3% 0.6% 3 0 [J
A: 9.3 V: 2.5 A-V: 6.742 ct: 0.254 0/ 0 9% 3% 0.6% 3 0 [J
A: 9.3 V: 2.6 A-V: 6.737 ct: 0.259 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.4 V: 2.6 A-V: 6.733 ct: 0.263 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.4 V: 2.7 A-V: 6.728 ct: 0.267 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.4 V: 2.7 A-V: 6.723 ct: 0.271 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.5 V: 2.8 A-V: 6.718 ct: 0.275 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.5 V: 2.8 A-V: 6.713 ct: 0.279 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.5 V: 2.8 A-V: 6.708 ct: 0.284 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.6 V: 2.9 A-V: 6.704 ct: 0.288 0/ 0 8% 3% 0.6% 3 0 [J
A: 9.6 V: 2.9 A-V: 6.699 ct: 0.292 0/ 0 7% 3% 0.6% 3 0 [J
Exiting... (Quit)
Here's my ~/.mplayer/config file..
# Write your default config options here!
vo=vdpau
vc=ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau,ffodivxvdpau
nolirc=yes
ao=alsa
i'm running standalone openbox..
thanks in advance..
Edit:
I'm getting this only when i open a video using qtfm's custom action..
The post below fixed the problem..
https://bbs.archlinux.org/viewtopic.php … 89#p914489
Last edited by dipesh.nomad (2011-07-29 05:46:27)

Hi harish.venkat,
welcome to the forums. Did you notice this thread is rather old? You should not necro-post, see our forum etiquette about this.
Please create a new thread of your own. You may link back to this one if necessary.
Closing.

Mplayer errors since Pulseaudio upgrade

Hey all... wondering if anyone has seen this problem yet... I've searched high & low but I've not been able to find any bugs raised in the mplayer project or any recent posts in here...
Since upgrading pulseaudio from version 5 to version 6, mplayer has stopped playing any videos in 6 channel surround sound using pulse. I initially though it was pulseaudios fault, I downgraded & mplayer worked again... but I upgraded again & tested with VLC & a host of different apps, VLC is outputting surround sound via pulse and everything else works fine.
Mplayer works except when using the switch "-channels 6"
I can play any movie using mplayer in stereo using: mplayer -ao pulse -channels 2 somefile but mplayer -ao pulse -channels 6 somefile fails with the below AO: [pulse] pa_stream_write() failed: Invalid argument errors in the log which just keep repeating and the video shows as frozen on the screen.
==========================================================================
Forced video codec: ffh264vdpau
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 56.13.100 (internal)
Selected video codec: [ffh264vdpau] vfm: ffmpeg (FFmpeg H.264 (VDPAU))
==========================================================================
ID_VIDEO_CODEC=ffh264vdpau
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 6 ch, floatle, 384.0 kbit/4.17% (ratio: 48000->1152000)
ID_AUDIO_BITRATE=384000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=6
Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3)
==========================================================================
AO: [pulse] 48000Hz 6ch floatle (4 bytes per sample)
ID_AUDIO_CODEC=ffac3
[Mixer] No hardware mixing, inserting volume filter.
Starting playback...
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
Movie-Aspect is 2.40:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=2.4020
VO: [vdpau] 1912x796 => 1912x796 H.264 VDPAU acceleration
Movie-Aspect is 2.40:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=2.4020
VO: [vdpau] 1912x796 => 1912x796 H.264 VDPAU acceleration
[ass] PlayResX undefined, setting to 384
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument

Same problem here. For "mplayer -ao X..." and X>2, i get this:
MPlayer SVN-r37353 (C) 2000-2015 MPlayer Team
210 audio & 441 video codecs
do_connect: could not connect to socket
connect: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing ************************************.mkv.
libavformat version 56.15.102 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (ac3), -aid 0, -alang eng
VIDEO: [H264] 1280x532 0bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
Clip info:
encoder: libebml v1.2.3 + libmatroska v1.3.0
creation_time: 2012-12-21 00:20:30
Load subtitles in ./
SUB: Added subtitle file (1): ./************************************.srt
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 56.13.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 6 ch, floatle, 448.0 kbit/4.86% (ratio: 56000->1152000)
Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3)
==========================================================================
AO: [pulse] 48000Hz 6ch floatle (4 bytes per sample)
Starting playback...
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
Movie-Aspect is 2.41:1 - prescaling to correct movie aspect.
VO: [vdpau] 1280x532 => 1280x532 Planar YV12
A: 0.0 V: 0.0 A-V: 0.000 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
A: 0.0 V: 0.0 A-V: -0.042 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
A: 0.0 V: 0.0 A-V: -0.042 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
A: 0.0 V: 0.0 A-V: -0.042 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
A: 0.0 V: 0.0 A-V: -0.042 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
A: 0.0 V: 0.0 A-V: -0.042 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
A: 0.0 V: 0.0 A-V: -0.042 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument
AO: [pulse] pa_stream_write() failed: Invalid argument

I am trying to import subtitles to Adobe Encore but am getting error messages...

I am trying to import subtitles from a software called Aegisub to Adobe Encore, but i am receiving this error message:
The software that is used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.
I have exported the subtitles as an Encore text file but it still won't allow me attach these to my video. I have exported the video from Premiere as an H.264 and that slots into Encore just fine, i just need to use Encore to attach the subtitles.
Can anyone tell me what i might be doing wrong?
Thank you.

Thanks Stan. I think this is probably the answer but seeing as i am doing this at work, it is telling me the action was stopped because it needs to be checked by an administrator.
If i manage to succeed, i shall let you know. I was trying to import as an asset, wrongly, so this is probably going to be the solution.
Thank you

Mplayer Turkish Subtitle Error

Similar Messages

Maybe you are looking for