MPLS from a customer view

Scenario: I have thirty locations with one data center and one dr site. Each location has two pvcs. One for the data center one for the DR site. Question: If we switch to a MPLS network. It would be transparent to the because the router at each location would be a CE router or non-LSR. The provider would handle all the MPLS configuration. I hope this make sense.

Yes, you are absolutely right.
When we deployed MPLS at our domain, nothing had to be done at the CPEs. No changes had to be done at the CPEs templates. To our customers it's transparent the way we do packet forwarding. They don't have any idea that we do label switch instead of layer 3 forwarding.
If you are moving to a MPLS-enabled carrier, you may contract a MPLS-enabled VPN service. With that you may have just one pvc at each site (if you need save some $$), or you may ask for a active & backup/standby pvc scheme. MPLS give to network administrator all flexibility to deploy any kind of connectivity request.
Yours Truly.
Murilo Pugliese.

Similar Messages

Datablock from a custom view

Hello,
I have created a datablock manually which has the source as view.
Added all the items which are to be displayed.
when i run the form, the block shows me a message that Query caused no records to retrieve.( i have added execute query in the form too).
I selected the view from backend, it has 71 rows.
What properties should be set to ensure that the records are fetched.
Note: Using Oracle form builder 6i
Just the confirmation. in the data block Property the
Data source type is TABLE
Data source name is VIEW name
is this correct?
Note : Using oracle forms 6i
Thanks,
yadnesh
Edited by: Yadnesh on May 31, 2013 12:03 AM

Can you please let me know where do i have to set the org context or the org id in detail?Well, as I recall, you only need this if your EBS is configured for multiple organizations. It has been a while since I've worked with the EBS, but when I did we were a multi-org setup. Typically, you don't have to set the org or context when you run your form from the Application as this is already set for you. However, if your Custom Form does not include all of the objects from the TEMPLATE.fmb, you will run into problems because your Form will not be properly configured for the EBS framework. If you didn't create your custom form using the TEMPLATE.fmb, I strongly recommend you open the TEMPLATE.fmb and do "Save As" and save the TEMPLATE.fmb as your new form and them copy and paste all of the objects from your Custom Form into the new Custom Form you created from the template.
If you started your Form from the TEMPLATE.fmb, then I recommend you talk to your Apps DBA or other senior developer on your project and confirm with them that you have included all of the required/necessary objects to support your EBS Custom Extensions.
Also, if you haven't done this already, I recommend you take a look at the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
<ul>
<li>Oracle Applications Developer's Guide
<li>Oracle Applications User Interface Standards for Forms-Based Products
<li>Oracle Application Framework Personalization Guide
</ul>
This documentation is a "must read" when working with the EBS.
Finally, when you have an EBS related question (like this question) the best forum to ask your question in is the General EBS Discussion forum. My knowledge of EBS is very rusty. ;-)
Sorry, I couldn't be more helpful, but the people in the EBS General Discussion forum will be able to help!
Craig...

To remove Personalize button from a Custom View

Hi,
I have created a Custom View, and in this view it is displaying two 'Personalize' buttons and 'export to spreadsheet' buttons.
I have to remove one of them.
Plz suggest something for this.
As, i also tried to use "IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS " but this is of no help.
Regards,
Sharad

Hi,
In one of my views i have written this code in the view layout.
<chtmlb:tableExtension tableId = "ResultList"
                       layout = "FIXED" >
<chtmlb:configTable xml                   = "<%= lv_xml %>"
                      id                    = "ResTable"
                      navigationMode        = "BYPAGE"
                      onRowSelection        = "select"
                      table                 = "//ZACC/TABLE"
                      width                 = "100%"
                      hasLeadSelection      = "TRUE"
                      visibleRowCount       = "<%= lv_lines %>"
                      actionsMaxInRow       = "4"
                      selectionMode         = "<%= ZACC->SELECTION_MODE %>"
                      selectedRowIndexTable = "<%= ZACC->SELECTION_TAB %>"
                      selectedRowIndex      = "<%= ZACC->SELECTED_INDEX %>"
                      visibleFirstRow       = "<%= ZACC->visible_first_row_index %>"
                      usage                 = "SEARCHRESULT"
                      showNoMatchText       = "FALSE" />
</chtmlb:tableExtension>
So, any one can help me out if these buttons can be removed from here.

Links to discussion in a discussion board does not work from a Custom View

Hi,
I need to limit the number of Items shown in a discussion board the the 3 latest discussions.
The solution to do this is to created a new few where I set the item limit.
.. or so I thought.
The view shows only the 3 newest items however the link to the discussions are not working. If I change the view back to the normal "Subject/AllItems.aspx" view it works fine.
Anyone has a solution for this? hovering over the title link with the mouse I can verify that the links are different.
With the standard subject view where it works:
Home.aspx?RootFolder=%2Fsites%2Ftestsite%2FLists%2Ftest%20discussion%20board%2Ftest%203%202820&FolderCTID=0x012002000DF957D933C11F498845E0406B80727A&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
With my custom view where nothing happens when I click the link:
Home.aspx?RootFolder=&FolderCTID=&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
Thank you

check this post
http://social.technet.microsoft.com/Forums/sharepoint/en-US/9fc02732-3124-4c41-b7ce-ae26f6c3c00d/how-to-limit-the-discussion-board-webpart-to-show-only-10-discussions?forum=sharepointgenerallegacy
Another article
http://technet.microsoft.com/en-us/library/cc768269.aspx

How to stop Jdeveloper to overwrite my customized view object impl

Hi,
Does anyone know how to stop Jdeveloper to overwrite my view object impl which extends from some customized view object impl ?
Thank you.

"modifying something on the view object".
Do you mean, modifying the ViewObject from the Applications Navigator using the Edit Mode of JDeveloper on that ViewObject?
(or)
Directly modifying the Extended ViewObject Implementation class file in System Navigator?
If you edit your ViewObject class file and if you set the ViewObject to extend it from a Customized View Object Impl, unfortunately the model project of Jdev do not recognize it, becoz certain changes are required in xml (viewobject's definition file).
So, better extend the class from the customized impl in Edit mode of that ViewObject.

Change base view state from a custom component

I'm pretty new to flex and I'm having a small issue in change the view state from a component.
My Application have 2 custom components called userlogin and main menu. In the main application page I have userlogin component in one state and the main menu component in another. I'm trying to change the state if the login in successful from user login to main menu. I have the following function written inside the login component.
private function IsUserLoggedIn(evt:ResultEvent):void
                if (evt.result.islogin.toString() == "true")
                    currentState = "MainMenu";
                else
                    Alert.show("Login failed, please try again.", "Login Failed");
This code worked when I had all the controls in the main page. But then I created components and included them in to components and now when the login is success, its giving the following error.
ArgumentError: Undefined state 'MainMenu'.
    at mx.core::UIComponent/getState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core\UI Component.as:9908]
    at mx.core::UIComponent/findCommonBaseState()[E:\dev\4.0.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9928]
    at mx.core::UIComponent/commitCurrentState()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:9750]
    at mx.core::UIComponent/setCurrentState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\ core\UIComponent.as:9701]
    at mx.core::UIComponent/set currentState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core\UIComponent.as:6087 ]
    at components::UserLoginForm/__btnSubmit_click()[C:\Projects\WarrantyAutomation\src\componen ts\UserLoginForm.mxml:60]
I'm sure this has something to do with accessing the states from a custom component, but I do not know how to change the state to the main menu. Please help me with this. Any help is greatly appriciated.

Hi dasun1981,
private function IsUserLoggedIn(evt:ResultEvent):void
                if (evt.result.islogin.toString() == "true")
                    currentState = "MainMenu";
                else
                    Alert.show("Login failed, please try again.", "Login Failed");
If I am right the above function is in your userlogin component and the two components "userlogincomponent" and "maincomponent" are in main application file and the states were also defined in main application file.
But in the function above the currentState refers to the state of the userlogin component and not the main application ...but the states are defined in main application file...that's the reason why the exception was thrown...
Instead you replace the line in the above function with the below line:
Application.application.currentState = "MainMenu";
Please mark it as answer if it helped you.
Thanks,
Bhasker Chari

Call logical link from custom view on BP_HEAD

I added a custom view to BP_HEAD in which I display invoices from another system. By clicking on invoice number I need to open VF03 with that invoice. I am able to open the actual transaction VF03.
However, I am not able to pass the invoice number and open specific invoice that i click on in my view. I think I need to use
create_bor_based method. However, I am not sure how do I pass parameters to it.
lv_obj_type = 'VBRK' ?
lv_obj_key = Actual Invoice No?
lv_ui_objtype?
CALL METHOD cl_crm_ui_descriptor_obj_srv=>create_bor_based
      EXPORTING
        iv_bor_object_type = lv_obj_type
        iv_bor_object_key   = lv_obj_key
        iv_logical_system   = lv_logical_system
        iv_ui_object_type   = lv_ui_objtype
        iv_ui_object_action = 'B'
*       iv_component        =
      RECEIVING
        rr_result           =   lv_descriptor_object.
Below is code taken from outbound plug for Invoice Number. This code opens up transaction VF03. Now I need to pass the Invoice Number to this transaction to open specific invoice:
DATA: lo_nav       TYPE REF TO if_crm_ui_navigation_service.
DATA: lo_link      TYPE REF TO if_bol_bo_property_access.
DATA: lr_window            TYPE REF TO cl_bsp_wd_window.
* get service for navigation
lo_nav = cl_crm_ui_navigation_service=>get_instance( ).
CHECK lo_nav IS BOUND.
* navigate to destination
lo_nav->navigate( iv_link_id = 'ZSDINVOICE' ).
lo_nav->navigate( iv_link_id = 'ZSDINVOICE'
                           iv_data_collection = iv_data_collection ).
* lo_link ?=
*              cl_crm_uiu_bt_param_create=>if_ui_link_parameter_class~create_parameter_object(
*                                          iv_link_id   = 'ZSDINVOICE'
*                                          iv_parameter = '0385500008' ).
iv_data_collection->add( iv_entity = lo_link ).
IF iv_data_collection IS BOUND.
    lr_window ?= me->view_manager->get_window_controller( ).
    lr_window->call_outbound_plug( iv_outbound_plug = 'VBELN' iv_data_collection = iv_data_collection ).
ENDIF.

Here you go Maks
When you run the wizard thn you provide some class name and system will generate that class for you. You can edit the method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW of the class to pass the parameter value.
Sample code for the same is:
me->set_container_data(
iv_name = gc_BP
iv_value = BP ).
Now you need to have the access of the BP no. from this address. Where ever you are confirming the BP, in that view create a global attribute and in DO_PREPARE_OUTPUT method set the BP value to the global method and in the Z class method mentioned above you can reterive the value
e.g. lv_partner_no = ZL_*_IMPL=>gv_partner_no.
BP = lv_partner_no.
Cheers
Sufyan

Export gallery - enhancements from customer view

Hello
I'm coming from the customer side here. Many of the photographers I've been working with the past years are using Lightroom to export images in a webgallery, a flash one, where I am supposed to select which ones I want for my article.
Now, this is close to impossible I dare say with these galleries.
What I would like to do is at the very least have a way of selecting favorites, like a lightbox functionality so that I may browse through all the images and make a rough selection.
After that initial browsing I have maybe 10-15 photos in my lightbox where I can narrow the selection down even more.
Top stuff would be if I could judge pictures side by side as in Lightroom itself.
But a lightbox with selections at the very least.
Is this easy to accomplish via a plug-in or some other simple addon? Or are this actually not a good idea for Lightroom and more of a question for the website itself?

Hello
I'm coming from the customer side here. Many of the photographers I've been working with the past years are using Lightroom to export images in a webgallery, a flash one, where I am supposed to select which ones I want for my article.
Now, this is close to impossible I dare say with these galleries.
What I would like to do is at the very least have a way of selecting favorites, like a lightbox functionality so that I may browse through all the images and make a rough selection.
After that initial browsing I have maybe 10-15 photos in my lightbox where I can narrow the selection down even more.
Top stuff would be if I could judge pictures side by side as in Lightroom itself.
But a lightbox with selections at the very least.
Is this easy to accomplish via a plug-in or some other simple addon? Or are this actually not a good idea for Lightroom and more of a question for the website itself?

Is there any way to create custom views, like in Thunderbird & Evolution?

Hi Folks,
I have recently switched to Mac. Before this I was using Linux. For mail I used Thunderbird (TB) for many years, and then eventually switched to Evolution Mail (EM) for its smoother integration into Linux.
On both TB and EM I revolved my work flow around custom folder views. As new email came in I would label it (on EM, or tag it on TB). I have numerous inboxes (email accounts) so I would generally be starting out in a smart folder that displays all mail in each inbox. I would most of the time view that smart folder with a Custom View filter in place. The filter would simply display ONLY mail with NO tags/labels.
Once my filter inbox showed NO messages it meant I had labeled everything. I would them use other smart folders to display mail with certain labels AND NO "Completed" label. That way I could go to my "Reply ASAP" folder and see what needed my immediate attention. Each email I replied to I would then add the label COMPLETED and it would vanish from my view.
I explain the above in case someone has specific suggestions on how to achieve a similar workflow on Mail.
In short, what I am wondering is this:
- Is there a built in way to filter a folder on the spot (with a drop down list of predefined and custom Views) --- I have looked and so far did not find this feature
- Is there a way to do this with a script or add-on? I have looked at many and not found a suitable one yet.
I am appealing to the knowledge of those with more experience in Mail. It is new to me.
I am currently using TB on my Mac because it gives me the above feature. BUT it does not have the same degree of integration with the OS and other Mac specific apps that Mail has. Thus I am keen to stick with Mail.
With thanks,
Jonathan

In addition to above:
I have installed a trial of Mailtags. It certainly improves the tagging capability of Mail.
I have also looked at the Smart Mailboxes and Smart Mailbox Folders.
As far as I can tell, however, there is no option to set up a smart mailbox that ONLY shows message with NO LABEL or NO MAILTAG (as the case may be). I can display messages with particular TAGS but not NO tags.
Is there any way to add more options to the Smart Mailbox filter system?
Cheers,
Jonathan

Use evdre to query data from a SQL View

Hi all
I believe that it is possible to use evdre to query data from a SQL View. If this is possible then how does one go about setting it up in the evdre options (assuming that the view has already been created)?
Regards,
Byron

Byron, perhaps this is no longer supported, it might be worth opening up a case at service.sap.com on this. However, I did find the following on Page 11 of the "Usages and Considerations of EVDRE" pdf file. This doc is imbedded in the helpfile for BPC 7 SP5 (which was released in August of 2009, well after note 1315011 was last updated.
It looks like you are limited to one custom view per application, since you have to name the view in a parameter at the APPLICATION level. Go into BPC Administration, login to the application related to the custom view, choose "Set Application Parameters" and enter the name of the view to the Application Parameter called "EVDRE_QUERYVIEWNAME" If it is not listed, go ahead and create it at the bottom of the Application parameter screen.
Also: I interpreted the following info from Page 10 of the same doc:
In your EVDRE, set the following options:
QueryEngine: MANUAL
QueryType: enter either NEXJ OR TUPLE see below:
NEXJ - Use two-dimensional queries using the nonemptycrossjoin function
TUPLE - Use two-dimensional queries using tuples"
And I'm assuming you'd enter a Y for the following two parameters:
QueryViewName
"..to enforce the query engine to use a used-defined SQL view of the fact tables, when trying to read the values using SQL queries. This option is typically used in conjunction with the SQLOnly option (see below). "
Option SQLOnly
"..to enforce the query engine to only execute SQL queries, when reading data. This can be achieved using this option."

How to print from a planning view in APO SNP ?

Does anybody know how to print on paper from the planning view in the planning book.
I have made a view with a key figure.
In the view, I can see the productnumber, the key figure and the values.
Some users want to print it on paper.

Hi,
CSV method of download is the SAP standard format for saving the
files.
You can either create your own custom logic for saving in excel or
use BW functionality for extracting the required fields and form a
report to save & print in excel
Regards
R. Senthil Mareeswaran.

Error while adding a attribute to the the Custom view through a wizard

Hi ,
I have created a new custom view with value node through wizard succesfully.
Now I want to add a new attribute to that node.I am trying to do that by a wizard.
But i am getting the follwing error " Error during analysis of Source Code" although i have
commented or removed my all custom code from that view.
I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
"GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
Plz help me with this asap.
Regards,
Sharad

Hi Sharad,
I hope all your classes are active. In case you want to add a new attribute there are two steps.
1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
By using any of the two approaches you will be able to see teh new field in the configuration.
Hope this helps.
Regards,
Ruby.

How to create a customized view in SCOM monitoring to view alerts

Hi All,
I am trying to create a customized view in SCOM 2012 R2 monitoring for command center team to have the alerts from Server OS, AD, Exchange and few other MPs. I understand that I can use the option "Create by Specific source" and by selecting the
required sources but I don't want all the alerts from these sources to be listed there but only few alerts which the respective teams want it to be.
Thanks in advance.
Regards,
Srini

Hi All,
I am trying to create a customized view in SCOM 2012 R2 monitoring for command center team to have the alerts from Server OS, AD, Exchange and few other MPs. I understand that I can use the option "Create by Specific source" and by selecting the
required sources but I don't want all the alerts from these sources to be listed there but only few alerts which the respective teams want it to be.
Thanks in advance.
Regards,
Srini
Hi Srini,
Based on the above requirement, You want to create a Dashboard view with Specific alerts but not all right ?
Based on my understanding on your above requirement i created one in my SCOM. Please let me know if this is what you really wanted ?
For the below you really need to know what are those alerts, ONLY those alerts you want to be displayed in the dashboard.
Then Go to the Monitoring tab in SCOM and then Right click Active alerts and select New -> Select New Alert view
When you select new alert view you will need to specify the Resolution state and the Specific alerts you want.
In the below example i have selected "MSExchange Active sync Alert" as a example. So my goal is here such that only the alerts i have specified from my selection ( "MSExchange Active sync Alert") if it appears in New state will appear
in this view not all other alerts.
So for that i just used the below options:
Resolution state & Alert name
Resolution state = New
Alert name = %MSExchange XXXXXXXX%
Also as of i see there was no option for entering multiple alert names. But i think there is and i am still trying as it accepts some SQL Wild cards. So if any one has an idea what is the wild card what is to be used to mention multiple names in that Name
view please let me know.
Gautam.75801

Listing up business transactions from Account's View

Hie, When we Open Ship to party from IC Web, We have Assignment block "Quotations" at IC WEB from Accounts view. But it does not pull any quotations.
But it does pull for sold to party. I have checked SPRO settings for Customer Relationship Management->Master Data->Business Partner->Specify Display Options for Business Transactions and I maintained Area = QU.
But i still cant see Qutation list from Account's VIEW.
Can anyone advice me please? where i can make settings for Sold to part , ship to party etc??
thanks and regards,
Dinesh.

Hi,
this is something which you can´t change by configuration.
You have to do a small UI-development.
Open your component / view in tx bsp_wd_cmpwb.
I guess in your case the component is BP_BPBT and the view is AccountQuotationsOV.
You have to go to the context node.
Here please check the coding in ON_NEW_FOCUS and redefine it according to your needs.
Kind regards
Manfred

How to Create a Configuration Manager Console Custom View

I am trying to create an assembly per the SDK example here:
https://msdn.microsoft.com/en-us/library/hh948614.aspx
I have added the assemblies per this article:
https://social.technet.microsoft.com/Forums/en-US/5d74d30d-295b-4c51-8518-abdabbad731b/console-extension-custom-view-development?forum=configmanagersdk
Now most of my references resolve but at compile time I get:
Error 1 'MyCustomView.MyViewDescription' does not implement interface member 'Microsoft.ConfigurationManagement.AdminConsole.IConsoleView.TypeOfView'. 'MyCustomView.MyViewDescription.TypeOfView' cannot implement an interface member because it is
not public. \MyCustomView\Class2.cs 21 18 MyCustomView
Error 2 'MyCustomView.MyViewDescription' does not implement interface member 'Microsoft.ConfigurationManagement.AdminConsole.IConsoleView2.TypeOfViewController'. 'MyCustomView.MyViewDescription.TypeOfViewController' cannot implement an interface
member because it is not public. \MyCustomView\Class2.cs 21 18 MyCustomView
Error 3 'MyCustomView.MyViewDescription.TypeOfViewController': no suitable method found to override MyCustomView\Class2.cs 23 33 MyCustomView
Error 4 'MyCustomView.MyViewDescription.TypeOfView': no suitable method found to override MyCustomView\Class2.cs 24 33 MyCustomView
Error 5 'MyCustomView.MyViewDescription.TryConfigure(ref System.Xml.XmlElement)': no suitable method found to override MyCustomView\Class2.cs 24 109 MyCustomView
I have been hunting around with a couple of decompilers looking for missing references etc for a few hrs and just can't seem to see what I am missing...
I have included the code block here - typically of course I would not include multiple classes in the same CS file but for this POC it should be fine...
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.ConfigurationManagement.AdminConsole;
using Microsoft.ConfigurationManagement.AdminConsole.Views.Common;
using Microsoft.ConfigurationManagement.AdminConsole.Schema;
using System.Reflection;
using System.Xml;
using Microsoft.EnterpriseManagement.UI.WpfViews;
using Microsoft.ConfigurationManagement.AdminConsole.ConsoleView;
namespace MyCustomView
public class MyViewController : OverviewControllerBase { public MyViewController() : base() { } public override void EndInit() { base.EndInit(); this.Content = new Label() { Content = "My Content" }; } }
public class MyViewDescription : IConsoleView2
override protected Type TypeOfViewController { get { return typeof(MyViewController); } }
override protected Type TypeOfView { get { return typeof(Overview); } } public override bool TryConfigure(ref XmlElement persistedConfigurationData) { return false; }
new public bool TryInitialize(ScopeNode scopeNode, AssemblyDescription resourceAssembly, ViewAssemblyDescription viewAssemblyDescription) { return true; }

Hi Alfonso,
I did eventually release the console extension (see screen shot at the bottom of the page
here).
It has been a while since I worked on this code but as I remember, once I got the references straightened out (see this thread), a lot of the confusion I had was just understanding that some of the programming that had to be done was in WPF (not WinForm).
The sample code from Microsoft does work though.
I never was able to figure out how to tie the "tree node menu item" functionality into the Ribbon (at the top of the SCCM console) so that is still on my TODO list.
So, my advice to you is to start with the Microsoft example code (which I did) from the SCCM SDK and if you get compile time errors, look first for the SCCM assembly references (Microsoft.[ConfigurationManagement, ConfigurationManagement.ManagementProvider,
EnterpriseManagement.UI.Foundation, EnterpriseManagement.UI.WpfViews) and then at the WPF assembly references (PresentationCore, PresentationFramework) for missing class references.
I hope this information can help you. Good luck sir!
Anthony LaMark

MPLS from a customer view

Similar Messages

Maybe you are looking for