MPLS L3 and L2 architecture issues

Hi,
I'm on an MPLS IP-VPN architecture and I would like to add a point to point L2-VPN (VLL ?).
Can we do L2-VPN on a cisco 2800 series ? 3800 series ?
Can I setup a lease line beetween a 3800 and a 6500 ?
I can see on my 3800 that I have the mpls L2transport commands but it doesn't seem to work on a vlan interface (which seems to be the easiest way to setup a virtual lease line as explain here: http://www.cisco.com/en/US/tech/tk436/tk428/technologies_white_paper09186a00800a3e69.shtml#wp41167)
Are there any issues to add L2-VPN on PE already use for L3-VPN ?
Best regards !

On my cisco 2800 series :
sh ver
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 28-Nov-06 18:37 by kellythw
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
ROUTER_2800 uptime is 8 weeks, 6 days, 19 hours, 17 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-spservicesk9-mz.124-4.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2811 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FCZ110473CW
6 FastEthernet interfaces
1 ATM interface
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
sh mpls l2transport doesn't exist
On my cisco 3800 series
ROUTER_3800#sh ver
Cisco IOS Software, 3800 Software (C3825-ADVENTERPRISEK9-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 18-Nov-06 23:16 by prod_rel_team
ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
R_LPRS_3825_PE_MPLS uptime is 13 weeks, 3 days, 17 hours, 18 minutes
System returned to ROM by power-on
System image file is "flash:c3825-adventerprisek9-mz.124-11.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 3825 (revision 1.1) with 224256K/37888K bytes of memory.
Processor board ID FCZ1013704D
4 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 Serial(sync/async) interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
62720K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
sh mpls l2transport vc 200
Local intf Local circuit Dest address VC ID Status
Tanks again

Similar Messages

Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB. Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use

Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM
Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB.
Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use all 512MB vRAM?@

Photoshop can only see what your video card driver reports.
You might want to update your video card driver from the GPU maker's website.

Shared services and workspace architecture(How we can find out req &respon)

Good morning Hyperion folks,
Does any body have any document or PDF about workspace and shared service architecture...How these both components are communicate each other..any idea or any document..while communicating of these if anything goes wrong,,where we need to check, what is exactly the problem (any suggestible logs)...
Company are doing big mistake by using this hyperion tool ..These guys are not supporting and even they don't know much about the tool apart Product dev team..and that too they are not disclosure any documents related product...
**Does anybody found any kind performance tunning guide or lab guide about workspace and shared service HFM,Planning...** I have never seen component wise documents and tunning guide and recommendations.
I am strong opnion about hyperion is,we would not get any support from oracle and documents so He can migrate Cognos TM1 and Finance management etc........
Edited by: 888154 on 29/09/2011 02:55

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
I have chek the DNS and nslookup all are correct but this is generate error.
Is this possible Mumbai location join with this Domain(CAPLDC)???
One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
Pls find the error message below and also find the attachment.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "capldc" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
The following domain controllers were identified by the query:
capldcserver.capldc
win-dyfq2poc88q.capldc
However no domain controllers could be contacted.
Common causes of this error include:
- Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
- Domain controllers registered in DNS are not connected to the network or are not running.
Pankaj Kumar

Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
Please refer to the articles below to fix your current issue:
http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

6500 sup 720 with MPLS, GRE and FWSM problem

We have 6500 sup 720 with MPLS configured and FWSM in transparent mode. We also terminate GRE tunnels on the same 6500.
After implementing the command “mls mpls tunnel-recir” GRE tunnels are hardware switched (which we want them to be), but we don’t have any more connection from locations thru GRE tunnels to servers behind FWSM.
Does anybody have idea how to solve this problem?

Hi,
not sure what you mean exactly.
the command “mls mpls tunnel-recir” is needed to avoid packets corruption in cases where the Supervisor engine is handling both the GRE header encapsulation and the MPLS label stack imposition. Since it cannot do it in one single shot (without causing random corruption) recirculation is needed. Nevertheless its presence does not influence whether the GRE traffic is handled in hardware or in software. Even without it, IF THE GRE TUNNELS ARE CORRECTLY CONFIGURED (meaning that each GRE tunnels has its unique source address etc.), the traffic is handled in hardware.
However since you say that after you enabled it you don't have connectivty anymore I suppose that some issue related to recirculation is happening (i.e. traffic ends up in the wrong internal vlan after recirculation).
Unfortunately the support forum is not meant to help in this case as in-depth troubleshooting is required. For that you need a TAC case.
regards,
Riccardo

Gmail/Exchange email and calendar syncing issues

I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!

Hi JadeyMU,
How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My experience with Apple TV and HDMI/HDCP issues

I am convinced that it is the software update to 4.2.2 from 4.2.1 that is causing this issue. All forms of applications only worked once for me and then it reverted back to HDCP issues. I read several postings everywhere including plenty at Apple's forum and AVS where people were very frustrated with this HDCP issues. Anyways, here is what I did before taking it back to Apple store....I bought AUVIO high speed cables from Radio Shack which is rated very high and tried that and I still got HDCP issues when using NetFlix or AirPlay from iPad. Youtube from Apple TV always worked well without HDCP complaints.
I packed everything back and took it to Apple Store (you can return without re-stocking fee up to 14 days from the day of purchase). After 14 days, you cannot even return it and you can ONLY fix it. I waited for a Technician. They heard my complaints but didn't refute any of it (possibly because they have had numerous complaints on this product). It took 5 minutes inside for them to test and see similar issues with the box that I had. So, they have swapped it for a new box. Before I left the store, I checked the settings including software version and Audio/Video settings in the Apple TV that is connected at the store. I found three main differences none of which the Apple customer service staff agreed could be the reason for my problems (surprise!!)
1. The software update from the shelf and the one they were using was NOT updated to 4.2.2 (it was still running 4.2.1)
2. Because of the software update, the Audio/Video setting for HDMI had the options to toggle between Auto, RGBy, RGBhi & RGBlo bandwidth. I believe this was in place to make the HDMI interface output as component with higher or lower bandwidth but the newer update will ONLY give you the Auto option (!!!)
3. They had this directly Ethernet wired and not through Wireless network and were recieving the all the full bar strength signals. On the box that I returned, eventhough I have 18 Mbps speed at the house (any given time of the day), the Network speed test was taking a long time. Moreover, after the Apple TV network test, it doesn't spit out the outcome of the tests (a BIG bummer and useless for testing).
Anyways, I took the new box and hooked it up directly to my SONY BRAVIA XBR3 TV to one of the HDMI ports, disabled the feature to send or recieve data to Apple directly and did NOT update the software. It worked fine and have tested all of the options. From what I have read so far (I have only spent 30 hours of my weekend on this when Apple product hookups are supposed to take 5 minutes ONLY), there is NO guarantee that it will work continuously as people have had things work on them for 6 months and then suddenly have the HDCP issues.
Will wait to see....if it continues to work....

I figured it out. Had to go to general settings on the main screen and restart. Synch of audio is much better.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Interesting and an imporatant issue at sales order schedule line.

hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date                      Material availabilyt date   delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date                      Material availabilyt date   delivery date
28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumar

can any one repsond for this.....

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Report Builder - Last page issue and Report Footer issue

I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.

To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards

Performance end to end testing and comparison between MPLS VPN and VPLS VPN

Hi,
I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
I would appreciate any support, guidence, advice.
Thanks
Shahbaz

Hi Shahbaz,
I am not completely sure I understand your request.
MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
Ingress PE impose 2 labels (at least)
Core Ps swap top most MPLS label
Egress PE removes last label exposing underlying packet or frame.
So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
Riccardo

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

I need to find out how to contact upeer management to try and resolve an issue before I open a complaint with the Attorney Generals Office as well as the Better Business Bureau and social media.

I have been with Verizon for 15 years. I have a family share plan with 2 smart phones a standard phone and a jetpack for wireless access. I pay for insurance on the 2 smartphones. Approximately a year ago I made a payment arrangement to continue service on my account even though I had some business difficulties. I was told that while the arrangement was in place I could not make any changes to my account. However, since then I have had the following issues and when I try and contact Verizon to try and resolve them I am place on eternal hold or disconnected.
Issue #1: My daughter lost her phone in June 2014. (The contract on this phone was up in 2013) I have been told that I cannot replace the phone even though I pay the insurance premium of $9.95 a month. I have been billed for it and have also been charged $54.87 for the monthly service as well. The phone has not made or received a call since June 4, 2014 yet I have been charged $274.38 I just was able to have the service suspended at the store today, 11/29/2014
Issue #2 My phone has intermittent flaws, locking up and reuring rests, dropping calls, failing to receive calls etc along with horrible battery life. I went into the local verizon store and they ordered me a refurbished replacement phone which was subsequently sent to me. When I received it I took it to the store to have them assist me in setting it up properly. I was told that I should NOT set it up but send it back due to some physical damage present on my old phone that would most likely result in a $150 charge...it was recommended that I just upgrade my phones as they were all out of contract and that would be the best solution. I asked the manager if that would be possible due to the "terms" on my account and she said "it would not be a problem". I was interested in an Iphone 6 which was not in stock so I sent the replacement phone back and left, to wait for the phone to become available.
Issue #3 I had a JetPack that was recently stolen from my car. I stopped in to ask what to do about it (it is no longer under contract either) They suspended the service and recomended I wait until I upgraded my other phones and then get a new Jet Pack. I just received noticed that they were going to continue billing me for it this week, even though it has been out of contract for several months??????
I recently went to Best Buy to take advantage of their Black Friday deals and was told that based on the status of my account I was ineligible for any upgrades. We called Verizon from the Best Buy and they told me that I needed to address my account status (I just made the scheduled payment on the 23rd of Nov) either with Financial Services or go to a Corporate Store. I went to the store and was told there was nothing that could be done at that level, I would need to talk to financial services (which was closed)
So, I am extremely frustrated and upset with this whole situation and wanted to make one more attempt to resolve it with Verizon before I make a full blown complaint to the Attorney Generals Office, the Better Business Bureau as well as post this incredibly BAD customer service story on social media. I hope that I hear from someone ASAP as this is critical that I get things resolved immediately. I can be reached at [removed].
Personal information removed as required by Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
Can you?
You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
Verizon although with the best coverage is also the highest priced.
Good Luck

MPLS L3 and L2 architecture issues

Similar Messages

Maybe you are looking for