MPLS PE IOS for 6500?

I apologize as this is kind of a "Out There" request. I'm setting up my first "service provider" type MPLS network consisting of several 6500s and ASRs. I've been looking around for a while now for a good IOS to load on the 6500s that will support a PE role (with 20-25 CEs on each initially and scale from there).
As I am a bit new to this design selection - does anyone have a recommendation of a good IOS to look at (Sup 720s w/ MSFC 3s)? It would be great if the IOS showed support for FWSMs as there are a few in the mix that need to be used.
Any help would be appreciated. My mind spins a little when looking at several "similar" IOS versions that appear to have differing features.
Jim

Hello GP,
I agree we use
s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
with PE role and FWSM blade supported
Hope to help
Giuseppe

Similar Messages

IOS for 6500: modular or not?

Hi all,
at customer's site, we're trying to define what will be the next IOS release to be accepted and installed on all Catalyst 6500.
Starting from HW installed and features desired, we are focusing on IOS 12.2SXH6, but a last choice remains: modular IOS or not?
The upgrade process is here quite long and not frequent (last upgrade was at least 5 years ago!) so the choice to switch to modular, if not taken now, should be postponed of years.
Does anyone of you know if some reasons exist not to adopt it? Is it stable and has it been well exposed?
Thanks a lot

To be or not to be? That is the question.
Modular IOS, when unvieled, was a very good idea. Instead of downloading the full IOS, you just download a small patch and it should work. The only problem is that there was very little support from Cisco itself. As to the question of stability, the modular IOS is cut from the same fabric so it will be similar.

Best/stable IOS for 7206 to support MPLS and L2TP/LNS

Hi.
I can see many versions of IOS that can support MPLS/L2TP/LNS for 7206.
But which is the latest recommended?
I am eyeing the following:
12.4.24T7(ED)
c7200p-advipservicesk9-mz.124-24.T7.bin
or
12.2.33 SRE6
c7200p-advipservicesk9-mz.122-33.SRE6.bin
Both released March2012.
Or should I go up to 15.1?
thanks

Hi Allan,
I would recommened moving to 15.1. Multiple bug fixes + lot of code changes are present between 124 - SRE and 15.1, particularly CEF, Multicast and QoS.
Regards

IOS for 2801 having support for MPLS

Assalam o Alaikum,
Is there any IOS for 2801 router which has the support for MPLS?

Alaikum Al Salam,
Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s) :
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Search by feature and choose MPLS, and then choose Cisco 2801 as the platform, you'll get a list of the IOSs that support MPLS on your platform, and please always check the required DRAM and Flash.
BR,
Mohammed Mahmoud.

Which IOS for Catalys 6500 switch?

Hi,
I have a Catalyst 6509 switch, which has "cat6000-supk8.8-2-1.bin" CatOS running. I would like to install an IOS in this switch. Can anyone let me know which IOS version is compatible with this switch? Below is the switch information. Thanks!
Don
Console> (enable) sho version
WS-C6509 Software, Version NmpSW: 8.2(1)
Copyright (c) 1995-2003 by Cisco Systems
NMP S/W compiled on Dec 2 2003, 18:03:16
System Bootstrap Version: 5.3(2)
System Boot Image File is 'bootflash:cat6000-supk8.8-2-1.bin'
System Configuration register is 0x2
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA050300SJ
PS1 Module: WS-CAC-1300W    Serial #: ACP05030847
PS2 Module: WS-CAC-1300W    Serial #: SON04221203
Mod Port Model               Serial #    Versions
1   2    WS-X6K-SUP1A-2GE    SAL0826ASHR Hw : 7.5
                                         Fw : 5.3(2)
                                         Fw1: 5.4(2)
                                         Sw : 8.2(1)
                                         Sw1: 8.2(1)
         WS-X6K-SUP1A-2GE    SAL0826ASHR Hw : 7.5
                                         Sw :
2   48   WS-X6348-RJ-45      SAD043105S1 Hw : 1.1
                                         Fw : 5.3(1)
                                         Sw : 8.2(1)
3   48   WS-X6348-RJ-45      SAD04150GXL Hw : 1.4
                                         Fw : 5.4(2)
                                         Sw : 8.2(1)
4   48   WS-X6348-RJ-45      SAD04290U51 Hw : 1.1
                                         Fw : 5.3(1)
                                         Sw : 8.2(1)
5   48   WS-X6348-RJ-45      SAL044831AT Hw : 2.3
                                         Fw : 5.4(2)
                                         Sw : 8.2(1)
6   48   WS-X6348-RJ-45      SAL04461QAJ Hw : 1.4
                                         Fw : 5.4(2)
                                         Sw : 8.2(1)
7   48   WS-X6248-RJ-45      SAD04260HBN Hw : 1.2
                                         Fw : 5.1(1)CSX
                                         Sw : 8.2(1)
8   48   WS-X6348-RJ-45      SAD04290TXY Hw : 1.1
                                         Fw : 5.3(1)
                                         Sw : 8.2(1)
9   48   WS-X6348-RJ-45      SAL05031G0E Hw : 1.9
                                         Fw : 5.4(2)
                                         Sw : 8.2(1)
15 1    WS-F6K-MSFC2        SAL0826AQDR Hw : 2.6
                                         Fw : 12.1(13)E14
                                         Sw : 12.1(13)E14

Glad to help, Don! Just came across the following site that offered a working combo. Might need to doublecheck the code's compatibility with the two types of line cards you have though:
http://inetpro.org/wiki/Simple_Hybrid_To_Native_6500_Conversion
IOS for sup1a
c6sup12-jk2s-mz.121-27b.E1.bin
Boot image on the MSFC2
c6msfc2-boot-mz.121-27b.E4.bin

RME 4.3, Inventory Collection doesn't work for 6500

I have a issue with Inventory collection for 6500 devices running IOS 12.2.33 SXI1, fails with a message, "device collection failed"
From IC_Server log i could see SNMP Request timeout exception, so increased SNMP timeout to 10 under device attributes for the device but still it fails.
attacehd is the extract from IC_Server log.
Could anybody help me on this? Thanks

You have not increased the timeout properly. You need to go to RME > Devices > Device Management > RME Devices, and edit the attributes for the required device. Select the device from the list in the left-hand pane to pre-populate the current attributes. Then increase the SNMP timeout to 10, and save the changes. On the previous screen, you will need to APPLY those changes before the 10 second timeout will take effect.

MPLS VPN support for VPNv6

All,
which routers and IOS has MPLS VPN support for VPNv6?
regards
Devang Patel

Hello Devang,
in the feature navigator look for the 6VPE feature for example a C7609 with sup720 3BXL and IOS 12.2(33)SxHa2 has the vpnv6 address-family.
see for example
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ov_mpls_6vpe.html
you still need an MPLS/Ipv4 core or an ipv4 core if using GRE tunnels:
Table 1 Feature Information for Implementing IPv6 VPN over MPLS
Feature Name Releases Feature Information
IPv6 VPN over MPLS (6VPE)
12.2(28)SB
12.2(33)SRB
12.4(20)T
The IPv6 VPN (6VPE) over a MPLS IPv4 core infrastructure feature allows ISPs to offer IPv6 VPN services to their customers.
This entire document provides information about this feature.
MPLS VPN 6VPE support over IP tunnels
12.2(33)
SRB1
This feature allows the use of IPv4 GRE tunnels to provide IPv6 VPN over MPLS functionality to reach the BGP next hop.
This following sections provide information about this feature:
â¢6VPE Over GRE Tunnels
Hope to help
Giuseppe

IOs for cisco 1900 series router

Hi,
Kindly provide me the IOS version (cisco 1900 router) which can fix the below listed Bugs,
Cisco IOS TCP Listener Crafted Packets Remote DoS (CSCek37177)
Cisco Multiple Devices Crafted IP Option Remote Code Execution (CSCeh52410)
Cisco IOS System Timers Remote Overflow (CSCei61732)
Cisco IOS Secure Shell Server TACACS+ Multiple DoS (CSCed65778, CSCed65285)
Cisco IOS IKE XAUTH ISAKMP IPSec SA Establish Authentication Bypass(CSCeg00277)
Cisco IOS Telnet Service DoS (CSCef46191)
Cisco IOS H.323 Protocol Implementation Flaws Cisco IOS Malformed IPv4 Packet Remote DoS Cisco SSH2 Server/Client Malformed Packet Remote DoS (CSCdz60229, CSCdy87221, CSCdu75477)
Cisco IOS SSH Large Packet CPU Consumption DoS (CSCdw33027) Cisco SIP Crafted INVITE Message Handling DoS (CSCdz39284, CSCdz41124) Cisco IOS Data-link Switching (DLSw) Capabilities Exchange Remote DoS (CSCsf28840)
Cisco IOS AAA RADIUS Long Username Authentication Bypass (CSCee45312)
Cisco IOS TCLSH AAA Command Authorization Bypass (CSCeh73049)
Cisco IOS MMP Stack Group Bidding Protocol (SGBP) Crafted UDP Packet Remote DoS (CSCsb11124)
Cisco IOS IPv6 Packet Processing Arbitrary Code Execution (CSCef68324)
Cisco IOS Malformed BGP Packet Processing Remote DoS (CSCee67450)
Cisco IOS Multi Protocol Label Switching (MPLS) Packet Remote DoS (CSCeb56909)
Cisco IOS IPv6 Packet Processing Remote DoS (CSCed40933)
Cisco IOS SCCP Control Protocol Malformed Message DoS (CSCee08584)
Cisco IOS OSPF Packet Handling DoS (CSCec16481) Cisco IOS ARP Table Overwrite DoS (CSCdu81936)
Regards,
Bala

Hi,
The Current running IOS version is 12.2(4)T7. I tried through bug toolkit. but i couldn't able to consolidate the IOS to fix these bugs.
Regards,
A.Bala
leolaohoo wrote at Tue Jan 25 02:20:52 GMT+05:30 2011:
>Balakrishnan Appavu,
>
>A new message was posted in the Discussion thread "IOs for cisco 1900 series router":
>
>https://supportforums.cisco.com/message/3277195#3277195
>
>Author : leolaohoo
>Profile : https://supportforums.cisco.com/people/leolaohoo
>
>Message:

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

How can I create a folder in ios for pdf files?

How can I create a separate folder in ios for my pdf files?

Hi Artistdeet,
For this you have to follow certain steps-
1. Tap on Document tab from left pane of Adobe Reader.
2. Tap on 'Edit' button placed at right side of top toolbar.
3. Tap on "folder icon with plus sign", it will ask you to enter the folder name.Enter desired folder name by which you want to create the folder.
Hope this will solve your problem.
Thanks
-Satyadev

Can i use a font such as Yuppy, Chalkboard which is basically included in iOS for commercial purpose?

hi!
I make a e-book and it will be published on appstore and android market as application.
I'm wondering about font.
Can i use a font such as Yuppy, Chalkboard which is basically included in iOS for commercial purpose like me?
I bought a mountain lion on appstore.
I look forward to hearing from apple whether it is lawful or not.
Have a blessed day~:)

Strangely, there isn't and end user license on Apple's site regarding iOS. But here's a look at the font agreement section from OS X Mountain Lion:
E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included with the Apple Software to display and print content while running the Apple Software; however, you may only embed fonts in content if that is permitted by the embedding restrictions accompanying the font in question. These embedding restrictions can be found in the Font Book/Preview/Show Font Info panel.
So basically, you need to examine the fonts to see if there are notes on usage restrictions or limitations.

How do I update the iOS for my 1st generation iTouch?

I am having difficulty updating the iOS for my 1st generation iPod touch. It is currently at 3.1.3. Can anybody tell me if this is possible?

A 1G iPod Touch cannot be upgraded past iOS 3.1.3. Sorry.
B-rock

How do I update IOS for my iPad2 wirenessly ?

How do I update IOS for my iPad2 wirenessly ?

It isn't possible to update from an iOS version prior to 5.0 wirelessly; it must be done from iTunes on a computer, and if possible, the one the device normally syncs with.
(90449)

HT4623 i still cant update my latest version of ios for my i pod touch 1st generation, please assist. can i still proceed to update the latest version?

i still cant update my latest version of ios for my i pod touch 1st generation, please assist. can i still proceed to update the latest version?
Thank you.
Regads
Jason Loh
have a nice day

Hi
The blunt awnser is you can't - sorry
But you can- unadviseably as it is illegal - but there is still websites that do it but if you want to get the further iOS' then you will have to purchase a new ipod :)
Hope I've helped
Matt

IOS for iPad 3.2.1

What is so critical about this update? Why not wait until iOS for iPad 4.0 is released in 3 - 4 months?

OrangeMarlin wrote:
romad wrote:
What is so critical about this update? Why not wait until iOS for iPad 4.0 is released in 3 - 4 months?
It corrects a lot of little bugs. I'm quite happy with the update.
What bugs have you seen corrected?
Also, it corrected the formula for displaying bars of signal for 3G, so it's similar to the iPhone 4.
Not for me - I have a WiFi only version.
Finally, you don't know when the iOS 4.0 for the iPad will be out. It could be delayed.
Well, since APPLE said that iOS for iPad 4.0 would be released in the Fall (Northern Hemisphere) of 2010, and since said FALL runs from ca. 22 Sep to 22 Dec, that is my basis for saying 3 - 4 months. However, you are correct; I should have said 3 - 5 months.
I figure that before iOS for iPad 4.0 is released, we'll have already seen iOS for iPhone 4.1 come out.

MPLS PE IOS for 6500?

Similar Messages

Maybe you are looking for