MPLS - Routing info from the same BGP AS

Hi everyone,
I'm working on MPLS - (lab) and I was wondering how is it possible (or command) to pass traffic to and from the same AS? In my lab I have to specifiy "nei allow-as in" in order to see routes from routers in my AS. I have 5 routers in my lab - One in AS 777 mpls and the other four in AS 6500). Everything in AS 6500 has the bgp sub command neig "ip addy" allow-as in. This is the only way I can see routes advertised from neighbors.
Thanks in advance.

Hi
Another (and I believe more used) possibility is to configure as-override on the PE towards CE
router bg MPLS-CORE
address-family ipv6 vrf test
neighbour x.x.x.x as-override
(syntax might be wrong)
Jon

Similar Messages

Email pdf by getting email info from the same pdf?

I'm working on a form that has many fields for a customer to fill out. One of these is an email form. I would like to write something in javascript that will grab this information that would have just been filled out by the customer and email the entire pdf to them.
Basically, I'm looking for a box that a user will be able to input their email into, with a button next to it that will email the pdf to them based on what their email is.
I know a little javascript but I'm not sure where to start on this... Any help would be greatly appreciated

Have a look at this tutorial:
http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.

Safari and Firefox on my desktop suddenly stopped combine ting to any website. IPad and IPhone work fine from the same wifi. Any ideas.

Safari and Firefox will not connect to website On desktop. IPad and IPhone work fine from the same wifi.

Restart your router.

Can i have 2 Apple IDs using the same playlist from the same pc?

can i have 2 Apple IDs using the same playlist from the same pc?

Easiest way is to create separate computer logins with all your own info including your own iTunes library.
I recommend each individual not have more than one AppleID because you will have purchases on multiple accounts
You can use more than one AppleID in an iTunes library.
AppleID/iTunes =used for purchases.
iTunes library = iTunes and all media on your computer.

Why does iTunes display the same album art for different songs, but from the same artist?

Hi,
a couple of days ago I decided I wanted all of my songs to have an album art. Before I didn't actually care, but since I discovered the view mode with the album arts at the top (the fourth one) I began searching for the right arts, since I like it this way.
I've stumbled upon a problem though. When I add two or more songs from the same artist, iTunes chooses to assign the same album art to the songs. It chooses the album art of the song I added first to my music library. How do I get it to show the proper album art?
I use a program called 'Mp3Tag' to change all the information of my songs. When it's just a single, I end up having an 'artist', 'title', 'genre' and 'cover'. The rest of the information doesn't bother me. With albums I add more information though.
Here's an example:
I added two songs, one being 'Usher - Climax (Kaskade Remix)' and the other one being 'Usher - Scream'. The one added first was 'Scream'. As you can see below, iTunes somehow assigns the same album art to both songs, while clicking on 'get info' clearly shows the songs have different album arts.
I discovered something else though:
When adding an 'album name' to the songs, they will show properly, as seen below. The thing is though, I don't want to add an album name. When I sync the songs to my iPod, my 'albums' list will show all of the songs as well, which I don't want.
Is there any way to solve this another way where iTunes won't sort by album, but by song title?
Thanks in advance.

Can anyone please answer my question?

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

Qemu/kvm: multiple USB devices from the same vendor

Hi fellow gurus,
Trying to pass-through two USB devices. One works just fine, but two produces an error.
They are the same type from the same vendor and libvirt seems to have no way to differentiate between the two, as it only uses the <vendor id='0xnnnn'/> & <product id='0xnnn'/> strings and not serial number of the device.
There is a reference -unanswered- here: https://bugs.launchpad.net/qemu/+bug/1090602
The error message from virt-manager:
Error starting domain: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
Detailed output
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper
callback(asyncjob, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in tmpcb
callback(*args, **kwargs)
File "/usr/share/virt-manager/virtManager/domain.py", line 1063, in startup
self._backend.create()
File "/usr/lib64/python2.6/site-packages/libvirt.py", line 678, in create
if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self)
libvirtError: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
The devices themselves:
Bus 001 Device 009: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 008: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Is there any workaround or fix for this?
Cheers,
Mike.
Last edited by DrMikeDuke (2013-07-22 14:01:18)

As I understand it, host:bus.addr is an alternative to host:vendor_id:product_id. So if I wanted to pass both of these thumb drives:
$ lsusb
Bus 001 Device 002: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
Bus 001 Device 003: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
I would use host:001.002 and host:001.003 . Note I said would use, because I've never tried it.
And usb_add is a qemu monitor command. See sections 3.4 and 3.5 of the doc you linked for info on the monitor.
All this being said, I don't use libvirt stuff so I don't know if it has the capability to specify USB devices by bus.addr or whether or not it enables the monitor.

TS2446 A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account

A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.

Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one.

Store the vital info from the absence quota record in an internal table

Hi experts,
I want to detrmine if the Absence records (PA2001 rec) deduction from date (PA2001-BEGDA) and absence to date (PA2001-ENDDA) are permissible for the validity period of the Absence Quota record (the PA2006 rec). If the quotas deduction from date, PA2006-DESTA, is greater than the PA2001-BEGDA, we then need to identify this absence quota record for change and change the deduction from date, PA2006-DESTA, to be the same as PA2001-BEGDA. Store the vital info from the absence quota record in an internal table and record the new date that the deduction from date that needs to be changed to. The changes will be made via a BDC session.
Please help me out...
Thanks,
Vicky

This looks possible if we code it in 'dynamic action' table, but the BDC may not read it during run time.
Do you still have this issue?
Thanks
Narasimha

Episodes from the same TV show are not grouped together

Hello,
I've a cousin from the states staying with me who has no forum membership so this question is from her.
When viewing the iTunes TV Library on her MacBook, episodes from the same TV show [Journeyman] are not grouped together under the same album art even though the info on them is exactly the same except for the episode title.
While I'm here, will the Irish store ever get TV?
Any ideas.
Thanks.

Have they already completed download? If not, let them finish and then see if they are, in fact, the same episode. You may also want to check your purchase history to make sure the episode was not accidentally purchase twice:
Seeing your iTunes Store purchase history and order numbers
http://docs.info.apple.com/article.html?artnum=93010
=) If they are the same episode, and you were not charged twice, you should feel free to delete the item.

Changed sequence settings to match source footage but only half footage now matches even though they're from the same camera and same aspect ratio

My source footage is 1920 X 1080 from a canon 60D. I changed my sequence settings to Digital SLR 1920 X 1080 to match. On the program window I have it set at "Fit". Only about a quarter of my footage now fits the program screen and looks to be the matching aspect ratio. The rest of the footage when on "fit" fills a tiny portion of the viewing window so it appears they don't match the sequence settings. I don't understand why this is happening because this footage is from the same camera, shot the same day, and have the same aspect ratios.
Can anyone tell me why this is happening and how I can fix it??

First of all, the setting that you mention is on Fit is the Zoom Level of the Program Monitor. It controls only how the sequence is shown in that monitor; it has nothing to do with how any sources are handled in the sequence.
Please provide the following information:
Exact version of Premiere Pro
Exact version of operating system
Graphics card and driver
Also, please post a screenshot showing the following
Project panel with the Video Info column visible
the Timeline visible
one of the problematic clips selected and the Effect Controls panel visible, with the Motion section twirled open.

Configuring 2 Router Interfaces to the same subnet

Hi There,
I have the following setup: Border router which has a serial interface connected to the ISP and 2 internal FE interfaces which need to be connected to 2 different switches in the LAN-side for redundancy. Of course, the 2 FE interfaces should have addresses from the same subnet; but when I try to assign those interfaces different IP addresses from the same subnet an error message reading Overlap in IP addresses appear to me.
The question is how can I assign the 2 interfaces different addresses from the same subnet to achieve redundancy? Thanks!
Regards,
Haitham

hi Haitham
on the following link you can find configuratiion example.
http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094663.shtml
remember to rate the post if it helps
regards
Devang

Problems sorting multiple releases from the same year

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

MPLS - Routing info from the same BGP AS

Similar Messages

Maybe you are looking for