MQSeries and JAVA

I'm trying to use the MqSeries classes with JAVA. I put the import com.ibm.mq.* statement in my program but I get an error that the package does not exist. What folder should the MQ Classes be in? I am using JDK1.3.0_02.
Thanks

You will have to include the necessary MQ jar files in your classpath.
If using a builder, you will have to import the jar files into the builder so that the builder knows that the packages/classes exist.

Similar Messages

Configure a Bridge between Websphere MQ 6.0(MQSeries) and Weblogic9.2

Bridge between Websphere MQ 6.0(Previously MQSeries) and Weblogic 9.2
At Websphere MQ 6.0 side:
³ Create a folder by the name JNDI-Directory under C drive
³ Create the queue manager by using the command at the command prompt:
crtmqm testqmgr or you can create it by GUI also.
³ Start the queue manager: strmqm testqmgr. or you can start it by GUI also
³Define Local Queues in the newly created queue manager testqmgr by using GUI or by using Commands .Assume we have created a local queue by the name MyMDBQueue.
³ Create a file by the name MyAdmin.config,It¡¦s a configuration file under C:\Program Files\IBM\WebSphere MQ\Java\bin directory.
Now add the following entries into the config file
INITIAL_CONTEXT_FACTORY=com.sun.jndi.fscontext.RefFSContextFactory
PROVIDER_URL=file:/C:/JNDI-Directory
SECURITY_AUTHENTICATION=none
Without the above step also you can do that. How it means
You have a file called JMSAdmin.config under C:\Program Files\IBM\WebSphere MQ\Java\bin directory.jsut uncomment the above mentioned 3 properties and comment the remaing that¡¦s it.
Next run the below command
C:\Program Files\IBM\WebSphere MQ\Java\bin>JMSAdmin.bat ¡Vcfg MyAdmin.config
Once you run the above command you will see
this prompt InitCtx>.
Now your command prompt will stop at
InitCtx>
Just type the following commands
a) InitCtx> def xaqcf(SenderQCF) qmgr(testqmgr) press enter
b) InitCtx> def q(MyMDBQueue) qmgr(testqmgr) queue(MyMDBQueue) press enter
c) InitCtx> end press enter
At step a it will create a queue connection factory by the name SenderQCF UNDER QueueManager testqmgr
At step b it will create a queue by the name MyMDBQueue UNDER
QueueManager testqmgr
At step c Its ends the Context cration process
At Weblogic 9.2 side:
Go to your domain location lib folder i.e. In my system it¡¦s in C:\bea\user_projects\domains\bplus_domain\lib. Add the following jars in lib folder
1) com.ibm.mq.jar
2) com.ibm.mqjms.jar
3) commonservices.jar
4) connector.jar
5) dhbcore.jar
6) fscontext.jar
7) jms.jar
8) jta.jar
9) ldap.jar
10) postcard.jar
11) providerutil.jar
Now restart the weblogic server. now the server reads all the jars
Open console of weblogic9
Go to Services³Messaging³Bridges³Jms bridge destination. under this create new
jms bridge destination.
Source of jms bridge destination:
Adapter JNDI Name: eis.jms.WLSConnectionFactofyNoTX
Classpath:<optional>
Connection URL: file:/C:/JNDI-Directory
Initial Context Factory: com.sun.jndi.fscontext.RefFSContextFactory
Connection Factory JNDI Name: SenderQCF
Destination JNDI Name: MyMDBQueue
Destination Type:Queue
User Name: <optional>
User Password: <optional>
Confirm User Password: <optional>
Now activate the changes what you have made
Destination of jms bridge destination:
Adapter JNDI Name: eis.jms.WLSConnectionFactofyNoTX
Classpath: < optional>
Connection URL: t3://localhost:7001
Initial Context Factory: weblogic.jndi.WLInitialContextFactory
Connection Factory JNDI Name: ConnectionFactory1
Destination JNDI Name: ResponseQueue
Destination Type:Queue
User Name: < optional>
User Password: < optional>
Confirm User Password: < optional>
Now configure a new Bridge by using above configured two source and destination
jms bridge destinations
At source you have to select Other JMS.don¡¦t select Weblogic7 or Higher because the source of this bridge is WebsphreMQ, not weblogic
Now once again RESTART The weblogic9.2 serever and put one message on WebsphreMq queue and check whether it reaches the destination queue of weblogic
Enjoy the session

Is this working for you? What errors do you get in the logs (bam, EL)?

Whats is difference between Java JRE and Java SDK

Hi,
what is the difference between Java JRE and Java SDK...
i think both of them have the same set of files to be installed...
I am not able to understand where they differ

The JRE (Java runtime Environment) contains just the stuff necessary to run Java and the SDK (System Development Kit) contains the extra stuff necessary (and also helpful) to develop in Java.

What is difference between C# Gzip and Java swing GZIPOutputStream?

Hi All,
I have a Java swing tool where i can compress file inputs and we have C# tool.
I am using GZIPOutputStream to compress the stream .
I found the difference between C# and Java Gzip compression while a compressing a file (temp.gif ) -
After Compression of temp.gif file in C# - compressed file size increased
while in java i found a 2% percentage of compression of data.
Could you please tell me , can i achieve same output in Java as compared to C# using GZIPOutputStream ?
Thank a lot in advance.

797957 wrote:
Does java provides a better compression than C#?no idea, i don't do c# programming. and, your question is most likely really: "does java default to a higher compression level than c#".
Btw what is faster compression vs. better compression?meaning, does the code spend more time/effort trying to compress the data (slower but better compression) or less time/effort trying to compress the data (faster but worse compression). most compression algorithms allow you to control this tradeoff depending on whether you care more about cpu time or disk/memory space.

What is the diffrence between package javax.sql and java.sql

Is javax designed for J2EE?
And when to use package javax?

Hi,
What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
1.The java.sql package and
2.The javax.sql package.
java.sql provides features mostly related to client
side database functionalities where as the javax.sql
package, which adds server-side capabilities.
You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Systems
http://www.sun.com/developers/support/

What is the diffrence between My Runnable Interface and Java Runnable

Hi folks
all we know that interfaces in java just a decleration for methods and variables.
so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
so what is the diffrence between My Runnable Interface and Java Runnable?
thnx

Hi folks
all we know that interfaces in java just a decleration
for methods and variables.
so my Question is why when i create an interface its
name is "Runnable" and i declared a method called
"run" inside it.then when i implements this interface
with any class don't do the thread operation but when
i implement the java.lang.Runnable the thread is going
fine.
so what is the diffrence between My Runnable Interface
and Java Runnable?
thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

Java SE and Java EE

I am a IT graduate and I still need some clarification on the relationship between Java SE and Java EE API. Does EE include SE?
For application development, I know I can use only SE without the EE, but can I use EE alone without SE?
Any good articles addressing my questions?
Thank you very much
R

Java EE in fact extends java SE, its primarily aim is to simplify developing multitier enterprise applications (Java SE provides all the necessary basic libraries etc.)
Because Java EE is an extension of Java SE, you cant use EE without SE - without SE there is no EE.

SSO between Portal and Java WD application

Hi Experts,
I am using CE 7.2 on localhost and I am very new to SAP.
I need to know how can I get SSO between Portal and Java WD. I have a WD application that displays the logged in user using "IUser currentUser = WDClientUser.getCurrentUser().getSAPUser()", as well I can use "IUser user = UMFactory.getAuthenticator().getLoggedInUser()". Both work.
Q1. What is the difference in the 2 above?
Q2. My WD application is set to authenticate user. The WD application is in URL iView. I need SSO between Portal and WD application. Is there a way to get this SSO without SAP Backend (ECC), for now I just need SSO between Portal and Java WD appl.
Everything is in localhost.
Please advice. Thanks.

> need to know how can I get SSO between Portal and Java WD.
Then I suggest you ask your question in the Web Dynpro Java forum instead of the Web Dynpro ABAP one.

J2me and java card, need help to communicate

we are trying to put together a reader to read smartcards using j2me and we figure that it would be easiest if we could develop it to work with java cards rather than standard smart cards, the problem is we get garbage when we communicate to it, the chip sends us crap, any suggestions what might be wrong, any calls we might be missing, has anyone worked with j2me and java cards or smart cards, any help would be appreciated.
einar

.... reader app and the ME behind it .... smells like mobile ....
First of all - if you want to have one mobile application running on this just make sure that whatever is written in ME can use drivers from the reader chip ....
Workin on the PC is something completely different. There was one good example how to develop one host application in Java provided with the JCOP tools long ago ... I don't know if this is now in the new Eclipse tools.
But - there was a small API provided that can give you good hints what to do - and - once you have it on the reader side - you can easily integrate ME methods with this ...

Eclipse 3.4 and Java 6 compatibility

Hi All,
I have a tomcat plugin inside Eclipse 3.4.2. Recently I upgraded from Java 5 to Java 6. When I try to start Tomcat from Eclipse,I get the following error:
Error occurred during initialization of VM
java.lang.UnsatisfiedLinkError: java.lang.Float.floatToIntBits(F)I
     at java.lang.Float.floatToIntBits(Native Method)
     at java.lang.Math.<clinit>(Math.java:801)
     at sun.net.www.ParseUtil.lowMask(ParseUtil.java:512)
     at sun.net.www.ParseUtil.<clinit>(ParseUtil.java:559)
     at sun.misc.Launcher.getFileURL(Launcher.java:388)
     at sun.misc.Launcher$ExtClassLoader.getExtURLs(Launcher.java:165)
     at sun.misc.Launcher$ExtClassLoader.<init>(Launcher.java:137)
     at sun.misc.Launcher$ExtClassLoader$1.run(Launcher.java:121)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.Launcher$ExtClassLoader.getExtClassLoader(Launcher.java:118)
     at sun.misc.Launcher.<init>(Launcher.java:51)
     at sun.misc.Launcher.<clinit>(Launcher.java:39)
     at java.lang.ClassLoader.initSystemClassLoader(ClassLoader.java:1304)
     at java.lang.ClassLoader.getSystemClassLoader(ClassLoader.java:1286)
Kindly suggest what needs to be done? If I am posting it in a wrong forum please suggest me the right one too.
I would like to know if Eclipse 3.4 and Java 6 are compatible or not.
Thanks in advance.

ShubhaPradeep wrote:
I have a tomcat plugin inside Eclipse 3.4.2. Recently I upgraded from Java 5 to Java 6. When I try to start Tomcat from Eclipse,I get
Error occurred during initialization of VM
java.lang.UnsatisfiedLinkError: java.lang.Float.floatToIntBits(F)IAre we talking 64-bit Linux?
I had issues launching eclipse on CentOS 5 64-bit and Sun JDK 1.6,
resolved by launching eclipse with the -vm option specifying Sun JDK 1.5 java.
[https://www.centos.org/modules/newbb/viewtopic.php?post_id=95784&topic_id=11661]

Problem with win2000sp3 and Java web start

I have JRE and Java web start (1.2.0_01, build b01) which come downloading file j2re-1_4_1_01-windows-i586-i.exe from sun.
I have win2000pro running on my PC.
I had updated win2000 to service pack 2 and everything was fine.
Now i decided to update to service pack 3 (in the process I also updated other components) from Microsoft and:
1) Java applets seem to be running fine within i.e.
2) If i try to run an application from java web start my PC freezes and I have to restart it.
3) Staroffice 6.0, which runs on Java, seems to be fine.
I reinstalled both sp3 and jre etc, with no result.
Is this a known problem?
Thanks to all.
Maurizio

I suspect that you have hit a known problem with Swing on Java 1.4.1 with buggy video drivers. Do you have an ATI card? They are the worst offenders. ATI released new drivers for its Radeon line today. They fix the problem.

Problem with JSP and Java Servlet Web Application....

Hi every body....
I av developed a web based application with java (jsp and Java Servlets)....
that was working fine on Lane and Local Host....
But when i upload on internet with unix package my servlets and Java Beans are not working .....
also not access database which i developed on My Sql....
M using cpanel support on web server
Plz gave me solution...
Thanx looking forward Adnan

You need to elaborate "not working" in developer's perspective instead of in user's perspective.

Report Script returns no data and "java.io.FileNotFoundException" error

When attempting to write to a new file (Eg: C:\TEST.txt), Report Script returns no data and "java.io.FileNotFoundException" error occurs.
This error occurs only in Essbase 9.3.1.3 release, however it works fine in release 9.3.1.0.
After running the report the script, it pops up the follwing message:
"java.io.FileNotFoundException: ..\temp\eas17109.tmp (The system cannot find the file specified): C:\TEST.txt"
When checked the TEST.txt, it was empty.

Sorry folks, I just found out the reason. Its because there was no data in the combination what I was extracting.
but is this the right error message for that? It should have atleast create a blank file right?

I continually get a Java error. I've uninstalled and reinstalled firefox and nothing has helped. I've updated flash and Java.

I have used Firefox as my default browser for many years. I've recently started getting a Java error message. It pops up continually. I have updated flash and java. I have uninstalled and re-installed Firefox and nothing has helped. I have had to start using Chrome instead of Firefox which I don't care for but I don't have the java error with Chrome. How do I fix this problem? The error reads as follows:
Java Script Application
Error: syntax error

Your '''JavaScript''' error has nothing to do with the Java plugin . It is likely caused by an added extension (the earlier forum threads [/questions/944619] and [/questions/943088] mention disabling or updating the Social Fixer extension will resolve the problem).
You can read this article for help troubleshooting your extensions: [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Java plugin doesn't work, even though it's installed correctly and java programs work.

As stated. I have a link in ~/.mozilla/plugin that points to test/jre/plugin/i386/ns7/libjavaplugin_oji.so, which is the java 6 update 21 runtime environment.
Java doesn't show in about:plugins, and java applets don't start (firefox suggests to install missing plugins).
Java programs using the jre outside the browser work.
This is on Linux 32-bits, Slackware 13.0, kernel 2.6.34.

<blockquote>As stated. I have a link in ~/.mozilla/plugin that points to test/jre/plugin/i386/ns7/libjavaplugin_oji.so, which is the java 6 update 21 runtime environment.
</blockquote>
Where did you read that?<br />
See http://kb.mozillazine.org/Java<br />
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html
<pre><nowiki>ln -s /usr/local/java/jre1.6.0_20/lib/i386/libnpjp2.so libnpjp2.so
ln -s /usr/lib/jvm/jre/lib/i386/libnpjp2.so /usr/lib/mozilla/plugins/libnpjp2.so (java-1_6_0-sun-plugin)
</nowiki></pre>

MQSeries and JAVA

Similar Messages

Maybe you are looking for