MQSeries Server Settings for connection to XI server

Dear All,
I am doing MQSeries 5.2 -> Sender JMS adapter-> XI -> Receiver RFC adapter -> R/3.
Can anybody suggest me what are the things in MQSeries which should be running at MQSeries server(like queue,channel, queue manager - their types) to get a message by sender JMS adapter in XI?
Should the queue manager be of local or remote type? If it local, then can XI connect to this queue manager in MQSeries.
In the above things, i am asking only about MQSeries server things and not of XI server things - just to clarify.
So if somebody has connected MQSeries server to XI server, then please give replies to my above queries. It is slightly urgent.
Thanks and Regards,
Rajeev Gupta

Dear Chirag,
i have already deployed the JMS adapter correctly in XI server.............
i want to know is anything left on MQSeries server for me to do as a prerequisite to send message to XI server........
So please reply to my above queries.
Currently i am getting the following error in my sender JMS adapter:
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '<IP_ADRESS>:<MQ_QUEUE_MANAGER>'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:546)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1137)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:799)
com.ibm.mq.MQException: Message catalog not found
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:171)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:228)
i have written '<IP_ADRESS>:<MQ_QUEUE_MANAGER>' just to hide the data - i am getting <IP_ADRESS> as IP Adress i gave in JMS adapter and <MQ_QUEUE_MANAGER> as Queue Manager i gave in JMS adapter.
Dear All,
Any inputs to my above queries.
Thanks and Regards,
Rajeev Gupta

Similar Messages

Server settings for remote Server in Flash Builder 4.5 Premium

Has anyone figured this out? Seems like everyone is talking about FlashBuilder that comes with PHP and that doesn't help me. So I'm still having trouble moving my mobile app to a remote server and I have FlashBuilder 4.5 Premium without PHP.
I have created a PHP project outside of Flash Builder and then I have connected to it using the Data/Service tab, but then it ask for the server information and that is where I'm having the issues.
It works create with the setting like this.
MAC:
Server Options
Web Root: /Applications/MAMP/htdocs
Root URL: http://localhost/
But when you try to export a release build or just like to test it, and insert your server settings.
Server Options
Web Root: /home/username/domain_name/
Root URL: http://mydomain.com
It doesn't Validate which in turn won't let the project work. Also it would be nice to put the remote server in there for testing instead of just for release builds. Any one have an answer. Every tutorial or explanation shows localhost.
thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Server settings for nokia 5800 xpress music

hiii,
can anyone tell me wat are the server settings for updating nokia 5800 xpressmusic via phone itself. whenevr i try to update it, it just shows define server settings noe and thats it doesn't work,.. this is a big problem. can anyone help please..
regards amit

xsb91 wrote:
What WLAN Wizard?
If you want to connect to WLAN, just go to the connections in settings, and choose WLAN. Refresh the list and connect to any which is available. If you see none, you're in a wireless-free area.
Near enough what i posted mate, so why bother
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

iCloud Mail Settings

Failure of server APACHE bridge::No backend server available for connection

All,
I have an env: Browser -> OHS -> WLS(Apex Listener) -> Oracle DB.
If any SQL run for more than 5 mins, i get the below error.
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.The only error i get is from the OHS's log
[2013-04-03T06:45:57.2946-05:00] [OHS] [ERROR:32] [] [core.c] [host_id: aa050] [host_addr: 121.146.60.102] [tid: 1260554560] [user: oracle] [ecid: 004qNDJn1du7m3KaETn3ES0004Ll00001T] [rid: 0] [VirtualHost: my.team.com:443] ap_proxy: trying POST /pls/apex/wwv_flow.show at backend host 127.0.0.1/7003; got exception 'Backend Server not responding'; state: reading status line or response headers from WLS (wrote? Y read? N); not failing over because method not idempotent, referer: https://my.team.com/pls/apex/f?p=4500:1003:16571271664493::NO:::Is there a timeout variable other than the below in WLS?
Session Timeout (in seconds): 3600 .
TIA,
JJ

Regardless of the version, this is not exactly a "Forms" failure. This is an issue between OHS and WLS. Basically it means that OHS (via mod_wl_ohs) was unable to communicate with WLS_FORMS (or whichever managed server you are trying to access). Most often this means the managed server is not running or not responding. If you believe it is running and is responsive (test by hitting it directly) then the problem is probably related to your installation. Generally, if you have not properly configured your networking before you installed WLS and FMw, then this can occur. For example, on Windows machine which do not have static IP addresses, the Installation Guide instructs you to install the Windows loopback adapter and configure it. If you did not do this, OHS likely will not be able to contact WLS_FORMS.
You can test what I have described above by attempting to access WLS_FORMS directly. For example:
http://yourHost:9001/forms/frmservlet
If that works, the issue is probably related to a net config issue.
If you have access to MyOracle Support, refer to these notes:
<blockquote><li>Failure Of Server APACHE Bridge After Running Report From Forms 11gR2 on Windows 64-bit platform (Doc ID 1457845.1)
<li>Oracle Fusion Middleware 11g - Troubleshooting the Error "Failure of server APACHE bridge" (Doc ID 1304095.1)</blockquote>
The product Documentation Library can be found here:
http://docs.oracle.com/cd/E24269_01/index.htm

Server settings for using other pop3/imap applications?

trying to set up mac mail on my motorola q, and can't quie get the mail to work. What should the setting be:
For incoming and outgoing server names
For account name (should it include @and after)
SSL?
Thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

HT4864 what are the server settings for icloud mail on samsung galaxy tab 2 outgoing works but incoming dosent

what are the server settings for icloud mail on samsung galaxy tab 2 outgoing works but incoming dosent

Found out the is a bug in the mail app built into android using another app instead now

What's the best FTP server software for Mac OS X Server?

What's the best FTP server software for Mac OS X Server?
We have looked at a few different applications out there (Rumpus, CrushFTP, etc...) and are wondering what the community feels.
Apples built -in isn't robust enough. We do need some advanced features (reporting, SFTP, a web interface would be nice etc...).
Opinions?

Hi
For me it has to be RumpusFTP Server:
http://www.maxum.com/Rumpus/
It has a secure web interface - no need to open ports 20, 21. No need for dedicated FTP client software for uploading and downloading. Supports the most commonly used browsers. Multi-platform support and can be installed on a standard client OS.
Tony

Settings for Desktop Intelligence Report Server

Hello,
can explain me te settings for the Desktop Intelligence Report Server.
Mainly the difference between "Minutes Before an idle connection is closed" and "Minutes Before an idle report job is closed". Shoud the have the same timeout ??
thx
Alex

Hi,
The idle connection time out: Specifies the amount of time, in minutes, that the server waits for requests from an idle connection. Setting a value too low can cause a user's request to be closed prematurely. Setting a value too high can cause system resources to be consumed for longer than necessary.
so its fine its not necessary that both should be the same time. But by default both of them are 20 min.
Thanks,
SK.

Duplicate Server Settings for Backup

I am wanting to duplicate my current Apple Server settings (10.4.8) into a new, virgin Server installation. We are basically only using IMAP mail and VPN on the server.
I have found "migration" instructions from 10.3 to 10.4, that show how settings can be saved to a USB flash stick and then used to install the new server. I haven't been able to get these instructions to work however, the new server installation doesn't see the flash stick.
Does anyone have any comprehensive instructions for this kind of 10.4 - 10.4 migration?

what settings are you trying to migrate?
Are you replacing the existing server or adding another (if replacing, we'll want to give you cloning instructions- it's much easier)
What hardware, are they both PPC?
What might help you... in ServerAdmin, when you click a service, then click settings, you will see a document icon in the bottom left of the window. If you drag this icon to the desktop, you will save a plist of that services config. Do this for all services you wish to copy the config from. Move those documents to the new server ANY way you can, you can use mac.com, email, file server, burn a CD, it doesn't matter.
On the new server, open Server Admin, then the service you wish to config, click settings, then drag the plist to the ServerAdmin window. This will load all settings from the old to the new.
But.... don't go through all those steps if your intention is to replace the old server... cloning can be much much easier.
If you need more of an assist, please post more about what exactly you want to copy from one server to the other. Explain what services will be in use on each machine.
Jeff

Apple Mail Client not saving server settings for iCloud?

I am trying to add my iCloud email to the Apple mail client.
As I work through the wizard to setup all the necessary entries inclduing the for the Incoming and outgoing mail settings but when the account is finally created in the
Mail client, the incoming mail server settings are not set and the box they are shown in is not available for editing.
The mail client vs is 6.6
I have tried this several times with the same end result, any help appreciated????

You don't manually add your iCloud email account using Mountain Lion. Instead, go to System Preferences>iCloud, sign into your iCloud account and check Mail. This will automatically add the account with the proper settings.

Messaging Server Settings for MMR Directories

Hi! Jay,
We have 2 - Directory Servers (v 5.2 - JES 05Q4) in MMR mode and we are testing Messaging Server (JES 05Q4). We are using schema 1, delegated admin and PAB for address book.
I have a question related to paburi attribute on the user entry. How do I list both the directory servers on this attribute for connecting to PAB. Basically we are looking for an automatic failover from DS #1 to DS #2.
I set the corresponding attributes on msg.conf as follows:
local.ldaphost = "ds1 ds2"
local.service.pab.ldaphost ="ds1 ds2"
local.ugldaphost="ds1 ds2"
I was wondering if there was a way to make paburi attribute MMR aware. In the sense that it can failover frfrom one directory to the other in case of directory failure.
Thanks

Hi ,
Thi is very much possible .. the whole trick is in replicating the NetscapeRoot data source in the MMR configuration. I know that once you replicate NetscapeRoot one of the servers will loose its configuration but U can do this. Here is what I have done:
Configure your Primary LDAP server say ldap-1
Configure your Secondary LDAP server but whicle doing so store the inforamtion about the secondary (ldap-2) in the primary.
Once done access ldap-1 from Console and Export NetscapeRoot into and LDIF file.
Now Unconfigure your secondary ldap server ... make sure that u run the unconfigure program rater than deleting the files. Now reconfigure ldap-2 server so that the configuration lies in the same server also configure the admin server make sure that u sore the configuration in the same path as you did while configuring the ldap-2 server .
Now you access the ldap-1 server its pretty obviuos that u cannot see the ldap-2 server configration by any means but u still hold the ldif file .. now Initialize the NetscapeRoot with the previously exprted ldif file and enable replication to the ldap-2 then u will have all the info you wanted in both the servers.
Now start configuring the Messaging Server . Then use the configutl ... the ugldap all that u have done .. this will work for sure .. I have done this and tested .. the messaging server can use either of the directory servers acording to the avaliability ..,,,,,
The only drawback of this is configuration is u cannot use this for a system already in use .. you can but at your risk .. for a fresh installation this will work for sure.......
Regards,
Srinivas.

Changing Mail Server Settings for Other IMAP

Hello,
         I'm an Admin for a treatment center and one of our psychiatrists has a BB Tour. He asked me the other day if I could set up his email account on our exchange server for him on his phone. Going through the mail setup wizard I selected "Other" account and set it up for IMAP and then it asked me for his email address and password. It took the domain name and then assumed the mail server names were as such. Now in a perfect world, this wouldnt be an issue. I recently took over for a complete moron and this guy has our MX records pointing to a 3rd party company where all of our outside emails go and then the Outlook clients are set up to pop this box in addition to the Exchange setup (I know its totally lame). What Ive done for everyone else is just setup a IMAP account using the server IP address and mail works fine for them. I cannot for the life of me find where I can actually edit the mail server names for the IMAP account I create on his BB Tour. Is this a limitation the phone? Or am I not looking in the right place. Thanks!
Solved!
Go to Solution.

Yup -- refer back to my first reply where I said to use the carrier BIS website...while I didn't say it quite so clearly, I did not say to use the on-device email setup wizards.
The device interface to BIS (aka email setup wizards) and the carrier website interface to BIS have subtle differences. For what you need to do, you need to use the carrier website from a PC/browser. Here is the link:
https://bis.na.blackberry.com/html?brand=vzw
If you have not yet created BIS credentials, you will need to. I find it easier to first create those on the device interface and then use them in the web interface. Afterwards, you will have to use the credentials in the device interface, but there is a "remember me" box so you will only have to enter them once.
Personally, I rarely use the device interface...a full keyboard, mouse, and monitor are so much simpler for doing things than a tiny BB screen/keyboard. But that's just me.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
to follow for this? Appreciate any advice or comments. Thank you.

Hi Barkley
Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
Section Reads -
When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
ISATAP—Protocol 41 inbound and outbound
TCP/UDP for all IPv4/IPv6 traffic
Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
"I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
in terms of supportability and provides the best user experience."
Kindest Regards
John Davies
Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

MQSeries Server Settings for connection to XI server

Similar Messages

Maybe you are looking for