MR 11 not updating the invoicing for services

Hi All,
I have a scenario where the client uses MR11 for clearing the invoices.
He does not use MIRO for invoicing.
During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
I have checked the Service based IV and the GR based IV in the  invoice tab of PO.
Can you please advice me as to why this is happening only in case of services.
Thanks and Regards
Sridhar.

Hi Charlie,
Thank you very much for the response.
Actually I am looking for the IR reduction and not the GR reduction.
The note you have mentioned applies for GR reduction.
Also we are in the ECC 6 environment.
Please update me with further information.
Regards
Sridhar

Similar Messages

  • SAVE TEXT not updating the database for Recipe Operation Long Texts

    Hi,
    We are trying to update the Recipe Operation long text using the FM SAVE_TEXT.
    The FM is not throwing any error, but the changes are not reflecting in the database.
    Text ID: PLPO
    Text Object: ROUTING
    Language: EN
    Text Name: Concatenated string of ARBPL,PLNNR,OPRATIONCOUNTER
    If someone faced similar scenarios, please share your inputs.
    Thanks in advance,
    Anand

    After some more R & D, i got to know that the Long Text indicator should be enabled to get the changes reflected in the C203 recipe operation details.
    In C202, if you pass two text lines for Operation long text, this Long text indicator is automatically enabled and its a non editable field.
    Can some one provide inputs how to enable this through program?
    Regards,
    Anand

  • F110 is not updating the Invoice even if it has a Subsequent Debit/Credit

    Here is the scenario:
    1. I did MIRO,
               GR/IR Clearing         5,000.00 usd
                       Accounts Payable        5,000.00 usd.
    2. I need to adjust the amount in MIRO so I used Subsequent Credit and indicated the Material Doc(generated in step # 1) in the invoice reference field.
               Accounts Payable    500.00usd
                       GR/IR Clearing             500.00usd.
    3. Now, I need to create a check for this using F110.   
    My problem is, when i process it through F110, i choose the document # as generated in Step 1, only the amount of 5,000.00 usd is appearing in the check.  Should it not be 4,500.00usd because i related the Document # 2 (generated in Step 2)  to the original document?
    Thanks in advance for your reply.

    Hi assassinofkings,
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"
     

  • I can not update the software for my iPad 2 because it comes back with the note that I am not connected

    What can I do , I tried to turn the iPad of and hold both. Button at the Same time but it still does not work

    You don't need to create another post. Just keep responding to the first discussion that you started. I'm sorry that the restart and reboot didn't work, but it gets a little confusing when you create a new discussion every time you want to respond.

  • TS3988 i have updated my phone with the new software and it keeps saying that verification has failed on my icloud and that the certificate for service is invalid.  following this now my phone does not recognise any of my iphone contacts and so i cannot f

    i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid.  Folowin this problem my phone also does not recognise my other iphone contacts so i cannot facetime or send imessage

    You don't need an app. You need couple's counseling. I believe what you want to do may also be illegal in many jurisdictions.

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • HT1918 I cancelled a payment through PayPal. How do I update the payment for that charge?  I looked at my payment information and it has my credit card information.  I'm not sure where to update the PayPal part of payment.

    I cancelled a payment through PayPal. How do I update the payment for that charge?  I looked at my payment information and it has my credit card information.  I'm not sure where to update the payment that was associated with my PayPal account?  I am not sure what that paid for?  I am trying to process updates on my IPhone & IPad for apps. I have already downloaded. 

    Hi Xellana, and a warm welcome to the forums!
    I'm looking for information and pricing on possibly upgrading the processor from the PowerPC to Intel.
    While anything is possible if you had enough money... NOPE, you can't change the CPUs to Intel, nor can you get any faster PPC upgrades for it. It'd be far cheaper to buy a new IntelMac than to replace everything inside the G5, and I mean just about everything, then figure out how to machine the case & such to mount Intel Logic Board, Graphic Card & such.
    Sorry.

  • HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

    I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

    I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update.   Expect it's due to being at 10.9.1.  Mail is still teetering between dysfunctional and non-functional.  Advice?

    I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
    If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
    I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

  • BAPI_PO_CHANGE to update the Price for the line item not updating the Price

    Hi,
    I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
    I am passing following data to the BAPI.
    Plant: CQ11
    PO                   Material                Price
    4500002142     TEST_BATCH     12
    Please provide suggestion.
    Regards,
    Jubin.

    Hi,
    check this link...this has sample code
    [http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
    Regards,
    Surinder

  • Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
    GSM / sim card model
    CDMA model
    Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file

  • 10.5.7 This volume does not meet the requirements for this update.

    First, 10.5.7 is not showing up in software update. I downloaded both the delta and combo 10.5.7 updates and they both give me "This volume does not meet the requirements for this update." I've done all the requisite stuff, permissions, volume check, reset PRAM, etc. I've downloaded the updates several times, and they worked on my 2008 iMac and 2007 Macbook Pro, so I know they work. I've searched and searched and can't find a resolution. It's as if there is some signature written to my boot volume that is preventing this update. Applecare was of no help either. Any ideas?

    Hi! Im new to this forum and i really dont know if this is the right place for me to say this but i really need some help! I have a MAc OS x 10.5.7 and had bootcamp installed on it so i could run both windows and mac! Over the last few days ive recieved a trojan virus on my windows... so i deleted my partition on mac so i basically just had Mac... now i am trying to reinstall my partition but disk utility is saying that i have an invalid volume free block count as it should be 41189365 instead of 41182017....argh! ive read the help stuff on it and it suggests me removing everything off my mac... but will i need 2 still have the mac install disc 1 to hand? as i have currently misplaced this and im ripping my hair out! Ive never had problems with my Imac until now and im really worried! I could really do with the help! Thanks Sam

  • Amount is not coming into the Invoice for Warranty Order

    Salute All !!
    Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
    This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
    This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
    Please provide solution.
    Rgds
    Srivastav
    +91-9973504950

    Hi,
    Because you are not billing to customer the net amount is zero-
    You can do like bill the component as regular item and give credit note against it.
    or else create seperate billing output type assign this to proforma invoice- print the cost of item  by pulling it in new smart form.
    (this is not very good idea because , customer knows the actual cost of the item)
    Thanks
    Chidambaram

Maybe you are looking for