Mr Redwood

Good morning, I am having a problem with restoring my Iphone 4s, I just get it unlock by fido and would like to restore it to factory setting but each time I am getting an error message saying the server cannot be found, how can I complete this restore?

Try to connect it to iTunes on your computer, then try resetting it again.If it still wont reset, try using your computer to reset it.

Similar Messages

Redwood User Account error on Job

Hi All,
We currently had all our BWP jobs fail with the following error:
JCS-00503: OS account SYSJCS does not exist or is disabled on BRSAPPRDBWPV2
JCS-00315: job must run under OS equivalent of Oracle account SYSJCS
We run our oracle database on a Windows 2003 environment and also our Redwood/SAP servers are on a Windows 2003 server.
The job itself users "USER" account.
The only way we could get the jobs to start was by restarting the BWP Redwood services, and this worked fine.
Also want to state the we had the following issue at the sametime which was flagged up to us in "messages":
resubmit.update_job:
ORA-04061: existing state of package body "SYSJCS.CHAIN" has been invalidated
ORA-04065: not executed, altered or dropped package body "SYSJCS.CHAIN"
ORA-06508: PL/SQL: could not find program unit being called: "SYSJCS.CHAIN"
All our BWP process chains are executed via the RUN BW CHAIN script, which is copied and renamed for the process chain.
We have tried to replicate the error in our dev environment but it worked fine. RFC points nothing at all.. Any help would be much appreciated. OSS note has been raised...
Thank You
Jazz

Hi Jazz,
The SYSJCS.CHAIN package is not used for BI Process Chains, only for CPS Chains. So the invalidation must have come from another source.
When this error occurs, as long as there are sessions started before the package has been re-validated (state reinitialized), you can continue to run into this error until all sessions have been restarted. The extend of the error depends on the package being reinitialized (how often it is used and the dependencies it has) and the session that needs to call it.
I think the error may already have been there before you did the chain import and just happened to surface shortly after the import.
Regarding your other questions:
1. RSI_IMPORT_BW_CHAINS or RSI_IMPORT_BW_CHAIN_DEFINITIONS:
the second one is only needed if you want to display the process chain definitions in the web interface before the chain is even running in CPS (in the job monitor you only see the processes that have started); if you do not use that, RSI_IMPORT_BW_CHAINS is enough
2. How would you go about maintaining BW process chains in Redwood (CPS)?
This is a question that every customer runs into at some point. First, you currently can not change a process chain definition in the BI system from CPS. Then there are cases where you probably want to leave the process chain structure intact (typically on the deepest level: drop index, do some work, recreate indexes). And there are other cases where it can be useful to bring some logic to CPS (typically on all levels where you have process chain within process chain in BI, ie. on all but the deepest levels).
For this last case, which is of course the most interesting for CPS, it can be very valuable to recreate the BI "meta-chain" structure in a CPS job chain.
So here you replace the BI "meta-chain" calling several BI process chains by a Cronacle job chain still calling some of the BI process chains (the ones on the deepest levels).
Now you can add all the CPS extras for error handling, retries, cross system dependencies, (external) events, alerting, etc. etc. on each and every point in the CPS job chain, so you get a lot more information, intervention and recovery points on your BI process than you would when running the entire thing in one big BI Process Chain (triggered from CPS or not does not matter).
Typically the customer's decision here mainly depends on the advantages that can be achieved, especially if there are service levels to be met on the reports that need to be delivered from BI and these deadlines tend to get tighter by the month.
By reducing the total runtime of the process or reducing the number of errors that occur or if they occur, the amount of work to fix it, you can save a lot of time, and thus money.
Hope this helps.
Regards,
Anton.

Customizing Jobs with Specific Actions - SAP Central Process Scheduling by Redwood - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi All,
First thanks all for your help and sorry for the delay.
Here are some precisions:
     - RFC Agent is correctly connected to SAP BW systems.
     - Basic ABAP programs (such as RSUSR000) are successfully executed in BW Systems
     - The SAP BI version is 7.0
     - XBP 2 is used
I was told to do some user configuration in SAP in order to make the process chain run via SCPS: there is a part in the help of redwood explorer saying some specific instructions must be applied in SAP BI:
The quote :
"To check or set the SAP BW user for background processes:
Go to Administration > Settings > Customizing (transaction SPRO).
Click on SAP Reference Img (German: BIW).
Expand the tree to find BW Customizing Implementation Guide > Business Information Warehouse > Automated Processes > Create User for Background Processes. (German: BIW > Automatisierte Prozesse > Benutzer fuer Hintergrund anlegen.)
Click on the hourglass (Maintain Activity) for that row.
Fill in the new username, for instance: BWALEREMOTE."
Issue is now that these exact mentionned items and menu do not exist (?) or at least were not found in our SAP BW systems by our SAP Administrator. The help file do not mentioned the version of SAP BI. Is there a compatibility issue ? I mean we have for instance a defined user ALEREMOTE but do not know if it has the same authorizations than the mentioned BWALEREMOTE.
Have someone an idea of the problem encountered ?
Regards,
Yi Jiang

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

Scheduling a BI job chain in Redwood

The problem I am having is we are trying to schedule a BI job chain via Redwood software and are not getting any response. Within Redwood, I have executed these jobs IMPORT_BW_CHAINS, IMPORT_BW_CHAIN_DEFINITION, IMPORT_BW_INFOPACKAGES using BI job chain 0fcsm_cm_10 which is defined in BI as a job chain. These jobs run to completion but nothing is moved into Redwood to schedule as you would see from a import of a CCMS job. When I run job RUN_BW_CHAIN using the same BI job chain ID I receive the below error. Not sure what Im missing or doing with the process to get to schedule the BI job chains with Redwood.
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "RSI.RSIEXEC", line 1638
ORA-06512: at "RSI.RSIEXEC", line 1759
ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 21
ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 80
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_SYS_SQL", line 1200
ORA-06512: at "SYS.DBMS_SQL", line 323
ORA-06512: at "SYSJCS.DDL", line 1085
ORA-06512: at "SYSJCS.DDL", line 1118
ORA-06512: at "SYSJCS.DDL", line 1177
ORA-06512: at line 3
JCS-00215: in statement RSOJ_EXECUTE_JOB

I am also seeing the same issue
anton the last information you requested
The following products are installed in the Cronacle repository:
Product                                  Version    Status
Cronacle for SAP solutions               7.0.3      Production
Cronacle Forecast Module                 7.0.3      Production
Cronacle Reports Module                  7.0.3      Production
Cronacle &module Module                  7.0.2      development
Cronacle Mail Module                     7.0.3      Production
Cronacle Audit Module                    7.0.2 r2.2 Production
Cronacle Process Manager for Web         7.0.3      Production
Cronacle Module Installer                7.0.3      Production
Cronacle Repository                      7.0.3.34   Production
Cronacle Monitor Module                  7.0.3      Production

Error while adding the server in Redwood CPS

Hi All,
Iam getting the following error when addiing the SAP server in Redwood CPS.
"SAP System XXXXXAn isolated SAP system can't be created in the GLOBAL partition"
Can any
Regards
Kiran

Hello,
As per the installation guide you should create an Isolation group first and then create the SAP system when connected in that Isolation group. See also forum entry [here|Re: Create SAP Sytem in Cronacel]
Regards Gerben

Redwood Connectivity to SAP R/3

Hi All,
We are trying to connect Redwood (external background job processor also called as Cronacle or SAP process scheduling by Redwood 6.0.2 SP6) to one of R/3 system. For the same, we are required to maintain R/3 instance and client in redwood using scripts RSI_MAINTAIN_INSTANCES and RSI_MAINTAIN_CLIENTS.
But we are not much sure on what should be passed in 'SAP connection string' while maintaining instance and how we will get to know if Redwood has got connected to that particular client of that instance. Any pointers in this regard are welcome.
For this we have even created one communication user in R/3 as REDWOOD and passing the ID and password while maintaining the client for that instance in Redwood.
We observed that script RSI_RFC_AGENT is getting executed with error. We want to know the purpose of this script and if it is the required one to get Redwood connected to R/3.
Please let us know if this is sufficient for connecting redwood to R/3 or some settings are required to be done on server side.
Thanks a lot in advance
Warm Regards,
Rajeet

Dear Blair,
Need some help from you on Redwood.
We are facing a major issue. We are one Redwood 6.0.2.7 with redwood basic version.
We have connected our backend R/3 to the redwood server. We have Redwood explorer installed on our laptop. We are in the process of configuring the users and roles. We are using the standard roles & are creating the users. We are trying to create a end user JCS_ENDUSER and have assigned all the end user roles as per below:
User privileges (Repository role JCS_USER)
The default system privileges for the role JCS_USER are:
Name Description
ALTER_DIRECTORY
Alter directory
ALTER_REGISTRY_KEY
Alter a registry key
CREATE_DIRECTORY
Create a directory
CREATE_FORMAT
Create a format
CREATE_REGISTRY_KEY
Create a registry key
DROP_DIRECTORY
Drop a directory
DROP_REGISTRY_KEY
Drop a registry key
DELETE_JOB
Delete output of own jobs
READFILE
View job output
SETCHILD
Execute destination jobs
SET_SUBSCRIBER_INFO
Set subscription info for yourself
SUBMIT
Request execution of scripts
SUBSCRIBE_QUEUE
Subscribe yourself to executions per queue
SUBSCRIBE_SCRIPT
Subscribe yourself to script executions
SUBSCRIBE_DIRECTORY
Subscribe yourself to job output in a directory
EDIT_JOB
Edit existing jobs
CLIENT_CONTENT
Regular end user access for clients.
VIEW_ANY_EVENT
View any event
VIEW_ANY_LOCK
View any lock
VIEW_ANY_SCHEDULER
View any scheduler
VIEW_ANY_RESOURCE
View any resource
CREATE_FILE
Create a file
VIEW_MONITOR
View monitor
All these roles were specified in the Redwood help in the explorer. But after even though we have assigned all the roles for the end user, after saving the user settings, when we log on, we are getting the following error:
JCS-02134: no license available (Concurrent Content users)
ORA-20800: JCS-02134: no license available (Concurrent Content users)
ORA-06512: at "SYSJCS.LM", line 1468
ORA-06512: at "SYSJCS.LM", line 2385
ORA-06512: at "SYSJCS.JCS", line 170
ORA-06512: at line 1
JCS-02134
*Cause: You are not licensed for this product, or the license has not
          been installed.
*Action: Check with your DBA whether the system is licensed correctly.
          Apply to Redwood or your reseller to get a license for this part
          of the product.
Can you please let us know the root cause of the problem.
Thanks a lot in advance for your help.
Warm Regards,
Rajeet

Queries related to Redwood Installation / Upgrade to Full version

Hi All,
We Need some help.
We have couple of question related to redwood installation, kindly help us.
We have SAP Central Process for Scheduling (Redwood 6.0.2.7) basic version installed on our Unix server.
We are now planning to migrate to the SAP CPS full version and have already procured the license. SAP added the installables at the marketplace under - Installation and upgrades - My Application components - SAP Partner products - SAP CPS Scheduler (Full) after the procurement. We have downloaded the installables now.
My questions are:
1. How do we now upgrade the Redwood OEM version to full version? Because, we had mailed to SAP with the OEM license to change it to full version, but then SAP replied to us asking us to send them the full version license. How do I get that? Does this file (register.txt) gets created once we start the installation of Redwood full version? Because we had assumed that by buying the full version license, we would just need to send the OEM license and it would be changed to a full version, but its not so. How do we go about from here. Do we do a new installation and uninstall the basic version?
2. Also, if we are to do a new installation, how do we get the register.txt file which we need to send to SAP for key generation?
We are very new to Redwood. Any pointers would be highly appreciated.
Awaiting your response.
Thanks in advance.
Warm Regards
Rajeet

SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
You could get a better response on an appropriate forum,I think.
You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could go through this
Must read</b>
Rgrds
Vineeth

Error in redwood job chain for Infopackage

Hi,
We have recently installed redwood for handling sap jobs and are able to run all the job chains with job step in abap program successfully.
However, for APO and BW job chains we have intermediate step for executing BW infopackage where the job is getting failed with the below error:
SAP/BW Error Message: rfc call failed 089: Job BI_BTC<infopackage_name>has not (yet ?) been started
The preceding abap job steps are getting executed successfully. After the infopackage step is failed the consecutive steps all fails.
This problem is common to all job chains with infopackage.
Any help is greatly appreciated.
Regards,
Sandeep.

Hello Anton,
We are facing the same problem: Same log error message.
The infopackage is correctly started and ended in BW.
Here our versions:
Redwood Explorer 7.0.4.2 SP2
BW :   SAP_BASIS 70016
           SAP_BW 70018
Do you think applying SAP CPS SP3 would solve the problem?
Or can we solve it by modifying some specific parameters?
Thanks in advance.
Regards;
Mathieu

Raise an Event in Redwood after a Commit to an External Oracle DB?

Hello Netweaver Community / Redwood specific,
I am at customer site and have been presented with the following scenario and subsequent question...
The scenario is that there is a 3rd party product (powerBuilder program / windows executable) that is updating an Oracle database on a server outside of the SAP landscape. This PB program is writing records to the oracle db that need to be picked up by XI process. The idea is that after the PB program makes its COMMIT of the records, then the XI process needs to be triggered to start so it can pick up the records.
So the question is... How can an event be raised in Redwood after a COMMIT of records has been made to this oracle DB that is on a server outside of the SAP landscape?
I am familiar with (and we are already doing) the raising of an event in Redwood from an ABAP program with function module that raises external events.
This is what I know - please do not hesitate to ask for further clarification.
Thank you,
Dean Atteberry.

Carol,
Sorry for the delay! I am not that frequent to SAP forums. You can write to me on my mail if you have something important. We can always update forum note for everyone.
I do not know XI that well. But If I understand correctly, you can trigger events in it based on arrival of a file. You can create a dummy job in Redwood on Unix or any filesystem you use to create a zero byte file once Powerbuilder job is ready.
Let me know if this helps!
- Bhushan

JSPM halts when deploying Redwood Scheduler

Hi,
I am having issues deploying SAP redwood scheduler through JSPM. I am trying to install the redwood scheduler through jspm according to the install guides and the jspm gets stuck at the deploy queue stage. It gets stuck and displays "selected archives successfully loaded". I have downloaded the correct version of redwood "ETPRJSCHEDULER18P_11-10004015.sca" according to my sp level and placed it in the trans/eps/in directory. Below are the logs i got from the jspm. Please advise?
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[E:\usr\sap\ECQ\DVEBMGS00\SDM\program\log\sdmcl20091026221822.log]/>
<!PATTERN[sdmcl20091026221822.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Oct 26, 2009 6:18:25 PM Info: -
Starting validation -
Oct 26, 2009 6:18:25 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorSkipDepending
Oct 26, 2009 6:18:25 PM Info: Update strategy: UpdateLowerOrChangedVersions
Oct 26, 2009 6:18:25 PM Info: Starting deployment prerequisites:
Oct 26, 2009 6:18:26 PM Info: Loading selected archives...
Oct 26, 2009 6:18:26 PM Info: Loading archive 'E:\usr\sap\ECQ\DVEBMGS00\SDM\program\temp\ETPRJSCHEDULER18P_11-10004015.sca'
Oct 26, 2009 6:18:29 PM Info: Selected archives successfully loaded.
Oct 26, 2009 6:18:29 PM Info: Actions per selected component:
Oct 26, 2009 6:18:29 PM Info: Initial deployment: Selected software component 'ETPRJSCHEDULER'/'sap.com'/'SAP AG'/'1000.7.00.18.11.20091005094400''/'0' will be deployed.
Oct 26, 2009 6:18:29 PM Info: Initial deployment: Selected development component 'scheduler-ear'/'redwood.com'/'Redwood Software'/'1000.7.00.20.0.0.28.17.35130.20091001122355175'/'0' will be deployed.
Oct 26, 2009 6:18:29 PM Info: Initial deployment: Selected development component 'scheduler-security-sda'/'redwood.com'/'Redwood Software'/'1000.7.00.20.0.0.28.17.35130.20091001122355175'/'0' will be deployed.
Oct 26, 2009 6:18:29 PM Info: Initial deployment: Selected development component 'scheduler-dblayer-sda'/'redwood.com'/'Redwood Software'/'1000.7.00.20.0.0.28.17.35130.20091001122355175'/'0' will be deployed.
Oct 26, 2009 6:18:29 PM Info: Ending deployment prerequisites. All items are correct.
Oct 26, 2009 6:18:30 PM Info: -
Ending validation -

Hello,
I have no issues with J2EE server and I have enough disk space.My Java server is fine (Dispatcher, Server, SDM). I have disk space over 150 GB. I was able to install the redwood software through SDM deploy tool but not JSPM (GO.BAT) tool. What can be the problem? Why does my SDM tool work but not my JSPM tool to deploy applications? Please advise?

Import job RSI_IMPORT_CCMS_JOBS is not working in Redwood Cronacle

Hi,
We are facing problems in the redwood cronacle, where in the standard import job RSI_IMPORT_CCMS_JOBS is not working. When ever we are running the script, the status of the import job goes to waiting and never gets completed. When its killed and re-run it again moves to waiting status.
Cronacle version : 7.0.4.2. Hope some one will help me out to solve this issue.
Thanks,
Arun Raghavan

Hi,
as mentioned by Anton in his previous post, the import of abaps and variants is a kind of nice to have that CPS does for you. The import of abap and variant data enables CPS to create a Script with the defaults all set and ready for you to submit. Having this data in CPS also means that when you submit your CPS SAP Script the parameter values for instance,client, abap,variant will only be a valid combination. If you remove the Script Parameter constraints for your CPS Script then you can submit your own Script (using a copy of RSI_ABAP_RUN or RSI_ABAP_RUN_PRINT but with the param constraints removed) with whatever values you like. If you enter a valid combination the SAP job will run. If invalid you'll get an error when trying to submit in SAP. Obviously the parameter constraints ideally are there to prevent this second scenario.
In terms of why the import of variants seems to hang; you haven't got variants begining with '&' have you? CPS doesn't like these 'dynamic' variants. I have had problems in the past where this is the case.
Regards,
Simon

EM Application Log and Web Access Log growing too large on Redwood Server

Hi,
We have a storage space issue on our Redwood SAP CPS Orcale servers and have found that the two log files above are the main culprits for this. These files are continually updated and I need to know what these are and if they can be purged or reduced down in size.
They have been in existence since the system has been installed and I have tried to access them but they are too large. I have also tried taking the cluster group offline to see if the file stops being updated but the file continues to be updated.
Please could anyone shed any light on this and what can be done to resolve it?
Thanks in advance for any help.
Jason

Hi David,
The file names are:
em-application.log and web access.log
The File path is:
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_brsapprdbmp01.britvic.BSDDRINKS.NET_SAPCPSPR\log
Redwood/CPS version is 6.0.2.7
Thanks for your help.
Kind Regards,
Jason

Oracle configuration in Redwood environment

Hi,
We have Redwood 6.02 on Oracle database. We have configured Oracle server as SHARED/MTS server .
We are planning to configure it as dedicated server. Please advise whether it is advisable to do it or Redwood recommends a SHRAED/MTS server configuration??. Thanks.
Thanks.
Raj.

Hi,
The connections for the Process Server should be dedicated (should be enforced in tnsnames.ora), so there should be no problem moving all connections to dedicated.
Regards,
Anton.

How to push a chain in CPS Redwood

1)During peak loads - the load step gets successful however the chain does not move further
this can be handled by pushing the chain from that particular step onwards in Bw side using function module RSPC_PROCESS_FINISH. Need to know how can this scenario be handled in CPS REDWOOD.
2)Some times due to data issues in BW side we ignore the records which has issues and push the PC forward. In Redwood side we need to know how to push the load further.
We tried to restart using operator message from the step we want the load to start from but CPS did not respond.
Regards
Ramesh

You are trying to convert a string that looks like a formula (contained in cell B2) and have the result of the formula be calculated in cell B3, right?
Two ideas:
Idea 1: If you format B2 as text then enter the text =5*2*3 then change the cell format to Automatic, it will do the calculation in cell B2. You can convert it back to text to see the formula again.
Idea 2: Use an Applescript. The Applescript would copy the string from B2, put the "=" at the beginning and put it into B3. B3 will calculate the result. You can design the script to do this for multiple sets of cells. An example is below for you to try out. If you like it we can make it so it can be started with a keyboard command. Not quite sure how we'll stop it with a keyboard command, though
Open the Applescript Editor application
Copy the entire script from below
Paste it into Applescript Editor
Open a new Numbers document
Put a formula into cell B2
Run the script
When you are done testing it out, stop the script. Otherwise it will run forever.
tell application "Numbers" to tell document 1 to tell sheet 1 to tell table 1
          set vold to ""
          repeat
                    set vnew to ("=" & value of cell "B2")
                    if vold ≠ vnew then
                              set value of cell "b3" to vnew
                              set vold to vnew
                    end if
          end repeat
end tell

Upgrading redwood cronacle from 6.02 to 7.04

Hi Experts,
I am upgrading cronacle from 6.02 to CPS 7.04.
For that i am looking for some relevant documentation,it will be great if you can provide me some pointer here.
Also ,i need run one sql script in redwood,can anyboy help me with the steps how to do that.i have the script in txt file.thank you.
Regards
Ajay

5 minutes after posting, I finally saw the answer. For others who encounter this error, you have to click add/remove on LabView itself and then choose to remove NI-DAQ from there.

Mr Redwood

Similar Messages

Maybe you are looking for