MR11 - clearing not related stocks

Hi Sirs,
I would like to know, is it possible to maintain when we run trans.MR11, clearing posting not corresponding with account for stocks in warehouse? And where I have to change the accounts if it is possible?
That's because our client want to change this solution.
Thank you in advance.
Regards,
Dani

Thank's for quick answer, but I need to know may I clear the difference to cost or profit account with mr11? And how to maintain this. I don't want to change the quantities and value of warehouse.
And if i clear with f-03, how can i exclude the cleared amount and orders from mr11 report? Is it possible?
Regards,
Dani

Similar Messages

Unable to clear out the stock in SAP

Hi Expert!
Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old. Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
Thanks.

hi
do the physical inventory and adhust stock
1) Create physical inventory doc using MI01
2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
3) Post the doc in Using MI07
Note : Give the batch no if the material is activated the batch

Clearing up negative stock approach during month end

Dear all,
I have a question with regards to how to clear up negative stock during month end.
Currently our system allows negative stock due to our company process requirement. However, these negative stocks will need to clear-up by finance or warehouse during month end.
May I know what is the best approach (including tcode, and business process) for this activity?
Thanks.
tuff

>
yagnesh bhatt wrote:
> HI,
>
> if you want to clear -ve stock,
> 1)you have to take receipt of material.. either against reference document docuemnt (like PO) or without document.
> 2) you can also post physical inventory doument, if there is inconsistency between actual physical stock of material and stock in SAP.
>
>
> YB
regarding your point 2: it is not possible to clear negative stock with phyiscal inventory, as you cannot even create a inventory document if you have negative stocks.

Clear negative WM Stocks

Hi,
Need to clear negative WM stocks. Please let me know if any of you have come across this scenario and solution.
Scenario : warehouse management activated for plant+storage location for which stock already exists. Any more stock removal from this storage location results in a negative quant's at WM.
Steps to construct the scenario
1. Posted a Material document, say for a quantity of 10, results in IM stock of 10. No warehouse stocks exits.
2. Warehouse management activated for plant+storage location.
3. Material document is cancelled
4. As a result stock at IM is zero, where as stock at WM is -10
P.S : Transaction LX23 does not solve this scenario (-ve stocks)
Error Message " The following WM stock figures could not be cleared because quantities are negative or belong to returns stock "
Possible solutions:
1. Reversing configuration may not be feasible as huge stocks exits in this storage location for other materials, which may result in other issues.
2. Deleting table entries. What are the other tables entries to be deleted apart from table "LQUA" ?
Thanks in advance

To be honest, I did not face this scenario, because I did the activation of WM in the right sequence.
You cannot just activate WM without doing any extra action to load your IM stock as well to WM to get it into sync.
Please follow the link, it tells you what alternatives you have when implementiong WM to an already existing IM.
http://help.sap.com/saphelp_40b/helpdata/es/dc/1939516e36d1118b3f0060b03ca329/content.htm

Document splitting: Items for clearing not found

Dear All,
I have created bank gl without tick of open item management now i have activate OIM & Transcation exisit for the same
I have done it as given below:
1) I have made GL balance Zero by posting an additional entry by F-02 (document type SA)
2) Block the GL for posting
3) though help of programe RFSEPA02 i have done the same.
Now the GL is OIM
Now i have to reverse the additonal entry pass to make GL balance zero
At the time of reverse through FB08 system gives an error massage
*" Document splitting: Items for clearing not found"*
Please any one help to resolve the issue
Thanks
Vijay

Dear Gladys xing
Thanks for your reply,
I have also done the same thing by passing one more entry to create the same balance.
When i am trying to clear open item for the both the extra entry system gives an same error
"Re: Document splitting: Items for clearing not found"
is this possible to clear that open item through F-03
Thanks
Vijay

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

How can i change the icloud account on my iphone?? so that this account is not related to my iphone any more

How can I change the icloud account on my iphone?? so that this account is not related to my iphone any more.....

tohamy wrote:
How can I change the icloud account on my iphone??
From the More Like This section on the right
how to change icloud account on my iphone

How to fix a looping desktop NOT related to Stuffit?

This very similar to another thread but I feel it's NOT related to it.
At first I thought it was related until I got further into the solution. I did download the 2008-08 security update as well as QT 7.6. That's when I think the problem started. The difference being that after xx iterations, the desk top would appear and work OK. If the computer sat idle for 3 - 4 hours (not likely due to our work load) it would loop again once I woke it up. It always happens sitting overnight. The problem is now approaching 2 weeks of acting this way. I didn't have any of the other symptoms like folder closing, applications quitting, etc.
I thought after looking for this AVR file I realized that I don't have Stuffit anywhere in my system. So that fix would not do me any good. I surmised that it might be a start up item in system preferences under users so I started bypassing them one at a time until I only had one left. That one was bypassed last night and made the loop count the highest ever at 84. Today, I noticed after removing (un-checking) all the start up items, one kept being executed (the opening a of a .dmg file).
It's tough to test if the fixes cure the problem because I have to wait 3 - 4 hours before it will fail. Usually I just wait overnight because our G-5 is in constant us with two of using it to get actual work accomplished.
This morning I thought it would never start but after 84 loops it broke out. Before it finally breaks out, the next to last loop stays up for 30 seconds giving you the false hope that it is over then it goes one more time and it's up and running. And another interesting thing is that if I can't wait for it to finish looping, I do a reboot and all is well and it starts up normally.
I have run Tech Tools Pro on all drives and they are all OK. Ran diagnostics on all components of the system hardware and all were OK. I even ran disk repair and permissions on all drives and all OK.
Any other suggestions, observations or sources I can go to would be very helpful. My Apple care ran out a year ago so I can't go there.
Thanks for responding,
Al

Thanks for the rapid response!  This morning it took 89 loops to wake up.  The number is growing.
*+Also look in these if they exist, some are invisible...+*
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
I did the above from your previous post and found nothing.  BTW how do you look for an invisible file?
Back under system 9 when the computer was doing things like this, we just rebuilt the desk top and it went away.  Now I'm not as up to speed on os x so do we need to rebuild the desktop from time to time and if so how does one go about doing this?
This morning, all of the startup items that I hid in systems preference/accounts appeared to work correctly as the .dmg did not open and did not appear on the desk top.
Another anomaly happening is from time to time I lose an icon (shows icon as a ?) in the tool bar but the application still works and restores the icon when you click on it.
I think I might have accomplished the same thing as safe boot by bringing up Tech Tools Pro from their emergency drive. After I did that I ran disk utility repair disk and repair permissions on all of my hard drives and it didn't find anything. All hard drives have been optimized last week.
My frustration is that it takes 3 - 4 hours for it to do the looping. Tonight, I will do the safe boot and see what happens in the morning. When operating under safe boot will I see my regular desk top with folders and files?
Now moving on. Is it possible and if so, how would I back out the recent security update and the QT update to see if that corrects the looping. Would going to os 10.5.6 fix this problem? I would like to stay with my current operating system. I realize that Apple has its' resources working on upgrading the 10.5 system and maybe things will get worse for us that are on os 10.4.x and wish to stay there.
I appreciate your support and that of others on this forum for without you, there would be no place to turn as Apple seems to be unreachable unless you have Apple Care.
Have a great day on this Super Bowl Sunday!
Al

Looking for app or technique to record to dvd individual chapters from a movie dvd i own, not related to idvd or iMovie?

looking for an app or technique to record to dvd individual chapyers from a movie dvd that i own? not related to idvd or imovie

Is this a commercial copy-protected DVD or a home-made video DVD?

How to reset the password in macbook Pro? This is not related to apple id

Hi,
I gave my macbook pro for service. Initially there was no password set up in the system. However the service guys have put some password to install the applications. (This is not related to apple id and apple store apps). Can you please help how to reset the password?
Regards,
Arjun K M

Welcome to Apple Support Communities
As you have OS X Mountain Lion, try resetting the password from Recovery > http://discussions.apple.com/docs/DOC-4101
It looks like OS X was reinstalled. After resetting the password, you will be able to log in and use your MacBook Pro

My trackpad is not working correctly. Cursor not moving as desired. Not related to water

Trackpad not working. Not related to moisture etc. Moves independently and switches between screens without prompt.

Hello Rosanne,
It certainly can be inconvenient and frustrating when your trackpad is acting erratically. I recommend reviewing the following article for an issue like this:
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/ts1449
Thank you for using Apple Support Communities.
Best,
Sheila M.

Link to Document Content Type issue - links not relative

I'm using the Link to Document content type in a library in order to link to documents in other libraries. We just migrated to 2010 from WSS 3.0 (2007) and are having an issue. We view our site internally thorough the internal machine address/name
and also have users connecting remotely from an external url. In 2007, it didn't matter whether we were internal or external, all links were apparently stored as relative because the "link to document" items worked fine either way. This
was despite entering the url fully and not relative. When viewing/editing the properties of that item, it shows you the full url applicable to where you are viewing it...internal if internal, external if external.
However, after the migration to 2010, all links that existed previously are fine, but any new items created using link to document apparently no longer store them as relative so either the internal or external users get the wrong link. For example,
if I put in the link as http://servername/library/doc the external users get that same link and it doesn't work, since it should be like https://myurl/library/doc. Viewing/editing the properties of the item shows an absolute url of whatever location
the item was added. For instance if I'm connected externally and add an item, even if i only enter it as relative, it creates the link as https://myurl/library/doc and then the internal users end up having to connect via that url and that is just a pain
due to AD and certificate issues. The internally created links are obviously not accessible at all from the outside.
I've also tried storing the link as relative when creating the item but it seems to overwrite it with the absolute link.
This is causing quite an issue with us. Does anyone have any insight as to what is going on and how to fix it?
thanks!

Hmm...I thought I had the thread set to email me if there were replies and I never received an email so I thought there were no replies. I came back to this since another issue cropped up that is related and there were replies!
I cannot recall how things were set up exactly in 2007 and there's no way to look back now. I'm a novice when it comes to AAM/DNS/IIS really. Maybe you can suggest what it should look like?
We have our site which is accessed internally by http://machinename . Externally, we use https://sharepoint.mydomain.com .
In AAM we have http://machinename listed in the default zone with the same url for internal and public. We also have https://sharepoint.mydomain.com listed, in the internet zone and it also has the same url for both internal and public.
In IIS, the sharepoint site has bindings for port 80 and 443, but nothing specific to https://sharepoint.mydomain.com
DNS....I'm not sure what should be here, if anything.
We can access the site just fine externally, there are just a few instances where some links do not work correctly and point to the internal url instead of external when you are external. The original post is one time and the other, found the other
day, is a search box webpart that points to a relative url for the results page but externally it ends up going to the internal url.
I'd appreciate any guidance. Thanks!

MR11 clearing - GL accounts requires an assignment to co object

Hi Experts,
While executing MR11 clearing, system is throwing error account xxxxxxxx requiring an assignment to CO object. We have done GR as well IR for which cost object is correctly picked as in purchase order. But while doing MR11 it is throwing error. What configuration needs to be checked to over come this error.
Thanks in advance
Narayanan

Hi,
Go to FS00 choose your That g/l account click on change mode and click on Edit cost element (F8) and click on Default Acct Assgnmt Tab give me a cost center and save
Thanks,
Raviteja

IPhoto opens spontaneously; not related to plugging in iPad or iPhone

I've researched the archives and similar questions have been answered but mine's a bit different. iPhoto, which I never use, has started opening everytime I wake the computer and sometimes spontaneously while I'm working on my iMac. Not related to plugging in my iPad or iPhone; it just started happening randomly about a week ago. It's annoying, particularly since I rarely, if ever, use iPhoto.
Thank you.

Any FAT formatted storage devices connected to your Mac?
LN

Application notes, related software On Measurement of sound and its analysis

Please send me Application notes, related software On Measurement of sound and its analysis.
Also send me list of the hardware and software required for sound measurement and analysis.

The software you are looking for would be LabVIEW with the Sound and Vibration Toolkit. With that you will not only get the tools you need, but a good deal of example programs to help you along the way.
From a hardware point of view, our Dynamic Signal Analysers are perfectly suited for sound and vibrational measurements. We also have a large line of Data Acquisition devices that are also well suited for these types of measurements.
Here are some links that may help:
Products:
http://sine.ni.com/apps/we/nioc.vp?cid=1382〈=US
http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=3122
http://sine.ni.com/apps/we/nioc.vp?cid=3472〈=US
App. Notes:
http://zone.ni.com/devzone/conceptd.nsf/webmain/CE46CCEDEBE745FA86256CC3007F9C06?opend
ocument&node=10521_US
http://zone.ni.com/devzone/conceptd.nsf/webmain/7023E833D245AD3386256D0A004D44C3?opendocument&node=10521_US
Sound and Vibration Toolkit User Manual:
http://digital.ni.com/manuals.nsf/websearch/B785E3CEABEB742486256E6D006845B8?OpenDocument&node=3122_US
I hope this helps you out.
Best Regards,
Jeremy R.
NI - Applications Engineer

MR11 - clearing not related stocks

Similar Messages

Maybe you are looking for