MR11 error - Error while determining currency type - C+, 171!!!

Hi All
We try to do MR11, with some of the companies we do not have a problem but a few of them give us the following error message.
Message no. C+171
Error while determining the currency types for 20000134668 00001
Procedure
Check the configuration.
All the companies are set up with parallel currencies.
Currency Type: 10 Company code currencies
30 Group currencies
Please tell me what I need to do get this fixed.
Thanks
Morgan

With this answer I could solve this error:
when a purchase order is referenced to a
Material/Plant and this Plant is not yet productive in ML! You can
check this in transaction CKM9.
Also this can be seen in transaction OMX1
(IMG: Controlling -> General Controlling ->
Multiple valuation approaches/Transfer prices -> Basic settings
-> Check Material ledger settings -> Activate Valuation Areas for
Material ledger) for valuation area 1111 and company code 1111 the
material ledger is active.
However, in transaction CKMLOH (This transaction is used to view
PO history of particular use where material ledger active as you can
switch between the currencies.):
If you know the PO click on the overview button (F2) and then Click
on the display button, you will see the error C+020. If this is so,thenplease either deactivate ML again or set it productive, but the current
state of the config will block these kind of postings since they would
result in corrupt data.
For more information about ML active please review the note 596558.
Also take a look to the notes 108374 and 425487 for your information.
Kindly note that ALL historical data in PRODUCTION system will be lost
with deactivation and activation of Material Ledger again.
It cannot be recovered after activating Material Ledger again!
Hope this would be enough!
Luck!
Lorena

Similar Messages

  • "Error occurred while determining attribute (CRM - PME)"

    Hi
    I am getting the following the following Error while creating Technical Master Data i.e. Connection Objects from CRM UI.
    "u201CError occurred while determining attribute (CRM <-> PME)u201D"  Message no. COM_PRCAT111
    We are not using any concept of Configurable products in our system .Is there any way to disbale PME check from CRM so that it does not hits PME and try to search for attribute values .
    Thanks
    Zing
    Moderation: Locked. Duplicated from[ this thread|Error occurred while determining attribute (CRM <-> PME)”" Message no. COM_]
    Edited by: Joaquin Fornas on Nov 17, 2011 8:48 AM

    Hi all,
    In rare cases, the system may generate the attributes, which were
    delivered by SAP, for the set types again. As a result, the table CO
    MC_SETTYPE_ATTR contains duplicate entries. These trigger the error
    message mentioned above.
    Solution is to delete the duplicate entries.
    Solution is to run report ECRM_ISU_CLEAR_DOUBLE_ENTRIES
    SAP Note No. 561238 is useful for IS-U connection objects and PoDs
    Regards
    Ullas Saffarulla

  • TELCO provider_ic: Error occurred while determining attribute (CRM - PME)

    Hi Gurus,
    I´m trying to implement CRM Telco Industry Solution.
    I tried to create a standard sales order (PRVO transaction type) using PROVIDER_IC Business Role(PRVO).
    But when I tried to create it I get the following error: "Error occurred while determining attribute (CRM <-> PME)"
    Can anybody help me in order to solve this?
    Thanks in advance.
    Marcelo.

    Hi all,
    In rare cases, the system may generate the attributes, which were
    delivered by SAP, for the set types again. As a result, the table CO
    MC_SETTYPE_ATTR contains duplicate entries. These trigger the error
    message mentioned above.
    Solution is to delete the duplicate entries.
    Solution is to run report ECRM_ISU_CLEAR_DOUBLE_ENTRIES
    SAP Note No. 561238 is useful for IS-U connection objects and PoDs
    Regards
    Ullas Saffarulla

  • Error occurred while determining attribute (CRM - PME)"" Message no. COM_

    Hi
    I am getting the following the following Error while creating Technical Master Data i.e. Connection Objects from CRM UI.
    "u201CError occurred while determining attribute (CRM <-> PME)u201D" Message no. COM_PRCAT111
    We are not using any concept of Configurable products in our system .Is there any way to disbale PME check from CRM so that it does not hits PME and try to search for attribute values .
    Thanks
    Zing

    Hi all,
    In rare cases, the system may generate the attributes, which were
    delivered by SAP, for the set types again. As a result, the table CO
    MC_SETTYPE_ATTR contains duplicate entries. These trigger the error
    message mentioned above.
    Solution is to delete the duplicate entries.
    Solution is to run report ECRM_ISU_CLEAR_DOUBLE_ENTRIES
    SAP Note No. 561238 is useful for IS-U connection objects and PoDs
    Regards
    Ullas Saffarulla

  • Hello Guru's  Error MSG while creating Material Type HERS

    Hello Guru's,
    While creating material type HERS the system is showing the following error *"The field orign acceptance is defined as a required field; it does't contain an entry'"* will any one give solution.
    even i have filled orign field in info record also still it is giving same error message,  will anyone give solution.
    full points for the answer.

    hers is for the mpn
    note the techincal name of that field and then go to oms9 and there make that filed for the filed selection key of hers as optional
    u can get the field selcton key of hers from the tcode oms2

  • Installing Solaris 7 - System hangs while determining bus Types

    Hi,
    I am trying to install Solaris 7 on my Compaq Presario. My system hangs immediately after the first screen. It hangs on the screen where it says "Bus Enumeration Determining Bus Type and gathering hardware configuration data. Not sure why it is doing that. Any help would be appreciated
    Regards,
    Ashish.

    My system is not branded It is custom bulit.
    What more information you want write me.
    Thanks for all help
    Amit

  • Error while determining the currency types for PO

    Hi,
    When running MR11 on PO4534356339 (account maintenance) the following error msg appears:
    Error while determining the currency types for 4534356339 00030.
    Message no.C+171
    Check the configuration.
    I have checked all currency settings and found ok. Material ledger is activated for this plant. It looks like there is problem in Item 30 of the Purchase order is having problem.
    Best Regards,
    MR

    Hi,
    Please refer this link :
    MR11 error - Error while determining currency type - C+, 171!!!
    Regards,
    Pramitha.

  • IDOC error 639 IDoc & and determined transport type & do not match

    Hello,
    can you help me with this issue?
    An idoc is stuck beacuase of this error:
    IDoc & and determined transport type & do not match
    Message no. IHC_IDOC639
    What does it mean? how can I fix thiss issue in order to re-process the idoc?
    Thank You

    Hi,
    is SAPNET note 784881 implemented? If no, implement it and try again.
    BR Christian

  • Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

    We have a SOAP to PROXY scenario Which is in Production.
    We keep getting the Error:
    " Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
    We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
    What are all the possible situation where we face such as this issue in Production.

    Please check the SAP note
    # 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
    1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

  • Valuating Foreign Currency, Err Msg:Required Currency Type 11 Not in Ledger

    Dear Experts/Moderator,
    When valuating Foreign Currency using FAGL_FC_VAL, error message displayed "Required Currency Type 11 Not in Ledger". Can any one explain the reason for the error and provide solution.
    Thanks
    Chandra

    HI,
    did you make a SAPNET search? See SAPNET Note 1115199 for details.
    BR Christian

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

    Hi Guys,
    I am currently facing some issues with respect to the deliver creation.
    The scenario is somthing like this.
    I have assigned a FOC Item category to an Consignment Issue order type.
    The system is able to determine the Item category successfully.
    However when the delivery is created it throws an error message
    'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
    Not sure why this occurs.
    All the settings seem to be set.
    If any one of you can help me out it would be great.
    Thanks.
    Regards,
    Pandi

    Dear Pandiraj
    The standard process is that consignment issue order should be created with reference to Proforma invoice.  Having said that I dont understand why you have assigned a FOC item category to issue order.  Not sure, whether this will work.  Also I feel that you should explain in detail the process for which you are configuring this.
    thanks
    G. Lakshmipathi

  • Error while determining ref.mov.type for WM via table 156S:601///

    Hi SAP gurus
    while doing delivery i am getting error like
    Error while determining ref.mov.type for WM via table 156S:601///
    please give me needful solution
    regards
    Sarvesh

    Chk via
    SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
    maintina the correspoding entries..
    BR,
    Krishna

  • Getting error while creating condition type in SPRO

    Hi ,
    can somebdy tell me why i am getting the following error while creating condition type in SPRO
    No valid change license available for message /sapcnd/
    and also while rule determination using condition type we are getting the following error.
    system error:system cannot read the structure for table
    reg
    venkat

    Hi Venkat,
    Do you have the error number code!?
    Regards,
    Michel  Bohn

  • Currency Type error when releasing billing docs to Accounting

    When I am trying to release the billing documents to accounting following error is displayed :
    company code ABC has currency type 31. the currency type has the currency key INR in the Fin. Accounting application. The same currency type is conveyed to fin. accounting accross the accounting interface with currency key CAD.
    System is also showing the tip :
    This is a system error in the calling application. Currency type 31 in company code ABC must have currency key 'CAD' when the data is transmitted.
    Please let me know if I have to do anything in Tcodes SCC4 or OB22. Detailed answer will be of help.
    Regards
    RK

    Hi Ravi,
    From the discription of the error what you have given what i umderstood is that in FI documents are posted with Currency INR, while the Cur. type 31 is transferring Cur. Key CAD to FI.
    Since there is a diff in the Cur the error is coming.
    Try to maintain Add. local cur in OB22 and then check.
    regards
    JS

Maybe you are looking for

  • I am using final cut pro X

    Greetings FC community I tried to move my project to an external hard drive but the location bar says "No Value" can anyone explain this to me please TY

  • Payment terms diffrence

    Hi Experts I ahve  question where the payment terms at the header and the in the invoice had been diffrent in the document flow pleasec can u advise what could be the reasons in diffrering I have ine at the order and diffrent in Invoice. Thanks

  • How to mute volume in i pad

    how to mute volume in ipad

  • Adobe Media Player, discontinued?!

    When I enter the players homepage at http://www.adobe.com/products/mediaplayer/ I see the following statement: "Effective September 16, 2010, Adobe® Media Player software will no  longer be available for download from the Adobe TV website.  In  addit

  • I can't zero my app store ID?

    I'm stuck because if I try to go to the iforgot website they ask either my old email adress (wich has been cancelled) or the safety guestion (wich I forgot). So I can't really do anything. I tried to make a new ID but my iphone still trys to use the