MR11 Error - GR reduction impossible. Wrong CI with FT 30 instead of 40
Hi,
We are on ECC 6.0 and have implemented Funds Management. When we try to post G/R Reduction in MR11 we are getting the error below:
GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct.
We checked the config in FMDERIVE and everything looks fine.
Any help on this issue will be appreciated !
Regards
Bhooma
The issue was fixed by applying SAP Note 1069481.
Similar Messages
-
GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct.
Hi Gurus
I want to clear my GR/IR G/L account using transaction code MR11 for a Service Order, and I'm getting error message' FMUP009 - GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct".
1. The FT of my GR/IR commitment item master record is currently set to 50 NOT to 30 as mentioned in the error message.
2. If I change the FT of my GR/IR commitment item to 40 (the correct setting), I still get the same error message as above.
Note: The offsetting commitment item's master record is set to a 30 (the normal setting for and expenditure commitment item).
Question: Could this be a program error?
Regards
Thuso MudauHello Thuso,
The symptom you describe might be solved by these notes
1027015 MR11 incorrectly updates Funds Management (FM) ->
This note is currently being checked and should be released shortly
1069481 Unjustified FM error message when posting an invoice receipt
So, please wait a little bit to have note 1027015 and make sure that both are installed in your system
Kind regards,
Mar -
Error in starting DB2 UDB (AIX with ECC 6.0)
Hello All,
I am facing error in starting the database as below :
<b>exec(): 0509-036 Cannot load program db2start because of the following errors:
0509-130 Symbol resolution failed for /usr/lib/threads/libc.a[aio_64.o] because:
0509-136 Symbol kaio_rdwr64 (number 0) is not exported from
dependent module /unix.
0509-136 Symbol listio64 (number 1) is not exported from
dependent module /unix.
0509-136 Symbol acancel64 (number 2) is not exported from
dependent module /unix.
0509-136 Symbol iosuspend64 (number 3) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait (number 4) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait64 (number 5) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait_timeout (number 6) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait_timeout64 (number 7) is not exported from
dependent module /unix.
0509-026 System error: Error 0
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
SQL1652N File I/O error occurred.</b>
I have even changed the Acc. I/O setting also as per the note :683396 .
But the error still exists.Please help me out in this ssue.
Regards,
Chandra.Hi Chandra,
this error may occure when you do not install DB2 on the node via db2setup on AIX. I assume you moved DB2 via ACC to this box. DB2 requires AIO. In general db2setup enables it for you. You can check this by issuing the following command: 'lsdev -Cc aio'
The correct output should be like:
aio0 Available Asynchronous I/O (Legacy)
The wrong one with disabled AIO:
aio0 Defined Asynchronous I/O (Legacy)
Use 'smitty aio' to configute AIO for your machine.
Regards,
Steffen -
Error :"The provider is not compatible with the version of Oracle client"
Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
AndersonHi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark -
A network error occurred while trying to communicate with the server.
Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems. -
MR11 : error CKMLGRIR013 for a po of a material UNBW
Dear.
I try to run MR11 for a purchase order with goods receipt of a material UNBW.
The system send this error message when I try to post clearing.
Error during reading of material ... or material locked
Message no. CKMLGRIR013
Can you help me ?
Thanks.Hi,
check SAP Note:-
Note 1145489 - MR11: Error handling in background processing
Regards
Kailas Ugale -
Initialization error : class file has wrong version 49.0, should be 45.3 or
I have Jdeveloper Base installation and JDK 1.5..the classpath and JAVA_HOME environment variables are set to the respective JDK1.5\bin folders. Even then when i try to make a web application, with a simple JSP page i get the following error :
Initialization error: class file has wrong version 49.0, should be 45.3 or 46.0 or 47.0 or 48.0 on CLASSPATH ..(followed by a long list of paths)
pls help,
thanksi have windows XP. i have tried to unset the class path...i get the same error.
i have JDeveloper 10g 10.1.2.
i have changed the jdev.conf file to set the Java Home to the path that contains the JDK 1.5.. -
I can't receive my incoming mail in Mac Mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution? I am able to get my incoming messages via yahoo website but not through the Mail app.
Try this, if it is not the correct department, ask them for the number or to be transfered..
Call 1-800-318-0612 for Login Help
Also on most autmated systems, if you hit 00000, or ##### you can sometimes get thru to a person.
Is Yahoo your Internet provider? Do you have a local provider? ei:AT&T, SBC, cable co, check who you make your check or epatment to...etc, If so I would start there, but if no joy go to the "Mothership"
I may be wrong about this, (it's been a long time now) I may have deleted my mail account from Mail (after writing down all the info from all General/accounts, and the rest of the tabs, and then added a new account using my existing email address, and it may have "walked me thru the rest of the proceedure".
But like I said it was a long time ago 3-4 years, but that may have been the path I ended up taking, make sure to write all the info down in case you need to re-enter it all manually. Then try calling them.
All the best -
when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>Wrong Forum
-
FATAL ERROR in native method: Wrong Method ID
I have a piece of C code from which I am trying to launch a piece of Java, but I am having severe problems just trying to get a simple integer value returned from any Java function. I keep getting the error message "FATAL ERROR in native method: Wrong method ID used to invode a Java method"
My C code looks like :
JNIEnv *env;
long result;
jmethodID mid;
jclass cls;
jobjectArray args;
jstring jstr;
jint res;
jobject myObj;
options[0].optionString = "-Djava.class.path=.";
options[1].optionString = "-Djava.compiler=NONE";
options[2].optionString = "-verbose:jni";
vm_args.version = JNI_VERSION_1_2;
vm_args.options = options;
vm_args.nOptions = 2;
vm_args.ignoreUnrecognized = JNI_FALSE;
// Create the Java VM
result = JNI_CreateJavaVM(&jvm,(void **)&env, &vm_args);
if (result == JNI_ERR )
printf("Can't create Java VM\n");
exit(1);
else
printf("Java VM created successfully\n");
cls = (*env)->FindClass(env, "Example1");
if (cls == 0){
printf("Can't find Class\n");
exit(1);
else
printf("Class Found\n");
mid = (*env)->GetMethodID(env, cls, "GetIntValue", "()I" );
if (mid == 0) {
printf("Can't find function\n");
exit(1);
else
printf("Function Found\n");
res = (*env)->CallIntMethod(env, cls, mid);
if (res != 0)
char pszTempString[256] = {'\0'};
sprintf (pszJavaString, "Returned from Java the value of %d", res);
printf("Returned from Java with ");
printf(pszJavaString);
My GetMethodID call works correctly and I have checked the signature (using javap -s) and that works fine. I've seen many references on these forums about using NewObject prior to calling CallIntMethod, but if I try to use that I then get the error message "FATAL ERROR in native method: a non-constructor passed to NewObject".
Any body got any ideas please.
ThanksWhat I couldn't figure out from your code is where you create the java object that is supposed to return the integer to your C code.
Alternatives:
o This is just code snippets, and you really are creating the object.
o Error - the object should have been created.
o Error - it is a static method, and you should be finding a static method and calling it on a class object.
(Other than that, I didn't see anything obviously wrong. -
BAPI_ALM_ORDER_MAINTAIN' on error. What's wrong ?
Hello,
I would only change the "description" text on the header of service order.
I'm uising this bapi with these parameter, but I got this error:
IWO_BAPI2 118: Impossible to save the order because no one operation managed.
Why this error, I dant have to manage operation !!!
Any idea ?
Changement text de l'ordre - start
CLEAR it_methods.
REFRESH it_methods.
it_methods-refnumber = '1'.
it_methods-objecttype = 'HEADER'.
it_methods-method = 'CHANGE'.
it_methods-objectkey = w_aufnr.
APPEND it_methods.
it_methods-objecttype = space.
it_methods-refnumber = '2'.
it_methods-method = 'SAVE'.
APPEND it_methods.
REFRESH: it_header, it_header_up.
CLEAR it_header.
it_header-short_text = 'ubaldr test'.
it_header-orderid = w_aufnr.
APPEND it_header.
it_header_up-orderid = w_aufnr.
it_header_up-short_text = 'X'.
APPEND it_header_up.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = it_methods
it_header = it_header
it_header_up = it_header_up
return = it_return_os2.
commit etc etc
Tks.With this:
CLEAR it_methods.
REFRESH it_methods.
it_methods-objecttype = space.
it_methods-refnumber = '1'.
it_methods-method = 'SAVE'.
APPEND it_methods.
CLEAR it_methods.
it_methods-refnumber = '2'.
it_methods-objecttype = 'HEADER'.
it_methods-method = 'CHANGE'.
it_methods-objectkey = w_aufnr.
APPEND it_methods.
REFRESH: it_header, it_header_up.
CLEAR it_header.
it_header-short_text = 'ubaldr test'.
it_header-orderid = w_aufnr.
it_header-order_type = 'CS02'.
it_header-planplant = 'CIMO'.
it_header-plant = 'CIMO'.
it_header-equipment = w_bzgsobj. "'CITMOB' "T399A
it_header-material = it_order_items_in-material.
APPEND it_header.
it_header_up-orderid = w_aufnr.
it_header_up-short_text = 'X'.
APPEND it_header_up.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = it_methods
it_header = it_header
it_header_up = it_header_up
return = it_return_os2.
now the error is:
on the 2° entry of the header table, the method change dont found !!
Any idea ? -
Error while adding a custom field with Input help via AET
Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
ShivaniThe question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET -
HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome
HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computersHi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
The UI text of the menus are not readable so it's impossible to work with
Hi
I install the photoshop cs6(x64) and i have the following problem. The UI text of the menus(not the toolbar drop down menus) are not readable so it's impossible to work with. After that, I completely uninstall the cs6 photoshop and i tried to install photoshop cc(x64)-with clean install- but the problem still exist.
Also I tried to change display settings from 1600x900(recommened)but the problem still exist...I send you some photos of the menus to understand better what I mean.Any suggestions? Specifications
Toshiba Satellite L775-15NWin 7 Home Premium SP1 x64
Intel Core i5-2430M 2.4GHz
Ram 8gb
Monitor 17"
Geforce GT 525MRight click on your desktop and choose Properties, then choose Window Color, Advanced Appearance settings...
Click on the Message Text to look at your Message Box item settings. Is the font Segoe UI, 9 point, color black?
Also, in Photoshop, check your Edit - Preferences - Interface menu. What is your UI Font Size there? Try changing it to something else, closing and restarting Photoshop, then changing it back.
Lastly, you could try resetting your Photoshop preferences to defaults. Press and hold Command - Shift - Option simultaneously (or Control - Shift - Alt if on a PC) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
-Noel -
Hi,
Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
I already removed the update suggested on other threads (KB2844286), but everything remains the same.
I always receive errors like this one:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
When I try to access administration tools it happens the same error, and I don't know what I can do more.
Please help me.
best regards,
Jorge GuimarãesI followed some tips, to trace the error, allowing some trace debug, and got this:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479
Maybe you are looking for
-
InDesign CS3 vs. Framemaker/Ventura
Has anyone used InDesign CS3 for producing long, text-intensive, books? How does it compare to Framemaker or Ventura? Will InDesign handle multi-page tables, for example? Is it possible to rotate multi-page tables 90 degrees (landscape table on a por
-
Custom action in Visual Composer
Hello! I have faced with one problem. I have executed the integration of BW reports and VC. I used "drop-down list" option for some characteristic in Input Form. I followed the guide: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/librar
-
Can't start 9iAS-Management server service in Win2000 pro
After install 9ias, I can't start Management server service. I got error emssage 'Could not start the OracleOra9ias_HomeManagement server service on local computer. Error 1053: The server did not respond to the start or control request in a timely fa
-
I recently got a iphone from a friend and I locked it, I cant hook it up to itunes cause it was started with her acct. Is there any way I can unlock this phone?
-
SMQ2, Product Categories and Materials
Hello, I am working on SRM 5.0 in ECS and I have an issue regarding the update of Product Categories from ECC. Actually, the initial load worked properly but the update does not work. In SRM, when I look at SMQ2 queue list, I have many entries, most