MR11 GR/IR Posting Error - PO History Inconsistent - error message M8278

Dear experts,
We have the problem as described in SAP note 708649. Error CKMLGRIR025 - Purchase Order History Inconsistent
This has also been described in this thread
Re: GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent
We also have the issue on posting an invoice "default qty & value 0" in MIRO, receiving error M8278 "You are not allowed to have zero lines".
However, so far we are not able to correct this eg do not know how to continue to clear the GR/IR
Any help or hints on this matter would be appreciated

Hi,
please note that the error message M8 278 is only issued if there is
zero amount in ALL document lines.
This means that you can post MM-documents with zero lines. But only if
there are other lines with amount > 0. The reason for this system
behaviour is, that every time a MM-Invoice is posted, an FI-Document is
created. In FI-Documents it isn't allowed to have zero lines.
So if you have an MM-Document with only zero lines, the Fi-document
can't be created and the error message is issued.
I hope I could help you further
Best regards
Erika

Similar Messages

GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent

Hi Everyone.
We currently have a posting in our GRIR for a Feright Condition Value against a Purchase Order which gets the above error when trying to post in MR11.
The Diagnosis of the error reads:
"The purchase order history contains differences between the goods receipt and invoice receipts/Account maintenance for the order item in the field Difference Quantitiy (= 43.804 TO) and Difference Value (= -342.77)
The purchase order history for this tiem is inconsistent"
When looking at this Freight Condition information in the Purchase Order I can not see why this item has resulted in this error in MR11.
Has anyone else seen this error come through in their system, and do you have any ideas on how to fix this.
Thanks
Hayley

We are experiencing the same issue with the GRIR Posting Error CKMLGRIR025 - puchase order history inconsistent. The actual message that we receive is Puchase Order history already inconsistent -->Quantity 1.00 EA Value 0.65-USD.
We reviewed SAP Note 708649 which also recommends using transaction MIRO with the corresponding default quantity and value o. However, we are not able to enter an Invoice for the "default qty & value 0", as SAP gives me error message M8278 "You are not allowed to have zero lines" (just like Haley commented). In reviewing this thread, I did not find the solution to the error message M8278 "You are not allowed to have zero lines" . Could someone help me understand?
Thank you!

Sales tax data in the posting term is not consistent (Error in Real Estate)

The following error is occured while creating a real estate contract.
Sales tax data in the posting term is not consistent
Message no. RECD076
Diagnosis
The sales tax data in the posting term is inconsistent.
Procedure
Switch to maintenance of posting terms and correct all errors that are shown there.

Hi Ananda.
What did you do to resolved this problem?
Could you help?
Tks
Lucas

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Parked document posting - Budget period screen field error

Dear Experts
We are working on FM BCS, While posting of the parked document through Transaction FBV0 we are getting the below error message.
"Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data
We gone through the error help information and checked field status groups and found everything is fine.
We can able to post direct invoices without getting any errors. The above error triggers only in the scenarios of " parked document posting".
Kindly suggest....
Thanks in advance.
Regards
Rao

Hi Mar Novalbos
Great, the note was helped a lot...
The issue has been resolved.
Thanks for your kind support as usual....
Regards
Rao

Posting document not created (Pricing Error)

Hello Everybody,
I have a problem with a invoice. If i go to VF03, I can see a positing status as F Posting document not created (pricing error). The error message is showing as pricing error in item 000010 Message No. VF 073. Kindly help me how to unblock this invoice.
Your help much appreciated.
Regards,
Ravi

Hi,
I think problem is in VKOA settings. Please go to VF03. Press Shift + F11. System will lead to Revenue Account Determination analysis. Please check the settings.
Regards,
Jigar

An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How reinitialize app?

An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How do I reinitialize the app?

Thank you again. Here's the console messages from trying to open iMovie and then opening the App Store. Clicking on the iMovie icon in App Store purchases and clicking on check for unfinished downloads:
8/28/14 4:56:26.743 PM Dock[214]: LSOpenFromURLSpec(file:///Applications/iMovie.app/) failed with -10699
8/28/14 4:56:47.878 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:56:47.879 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:57:50.201 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:57:50.201 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.745 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.745 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.824 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.824 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.847 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.847 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:36.276 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:36.276 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:39.448 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:39.448 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:39.449 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:39.449 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:55.996 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:55.996 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.021 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.022 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.051 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.052 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.342 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.342 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.425 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.425 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.508 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.508 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.518 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.519 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.696 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.696 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.808 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.808 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.826 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.827 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.838 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.839 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.843 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.843 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.857 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.857 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.893 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.894 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.907 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.907 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.923 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.924 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.969 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.970 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.039 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.039 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.045 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.045 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.145 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.145 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.231 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.231 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.249 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.249 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.293 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.293 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.350 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.350 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.352 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.353 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.400 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.400 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.402 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.402 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:59.814 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:59.814 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:59.932 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:59.932 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:00.697 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:26.564 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.565 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.660 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.660 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.840 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.840 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.864 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.864 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.984 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.984 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.069 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.069 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.079 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.079 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.083 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.084 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.385 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.385 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.389 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.390 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.391 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.391 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.435 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.436 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.443 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.443 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.479 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.479 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:31.036 PM acwebsecagent[127]: License : One or more of the License/Public Key can't be NULL
8/28/14 4:59:31.036 PM acwebsecagent[127]: SSLExt : Failed to get ScanSafe headers
8/28/14 4:59:31.036 PM acwebsecagent[127]: DownloadUpdatedConfig : Failed to download updated config. Host hostedconfig.scansafe.net. Code 0x80004005

Posting cycle when a database error is raised

hello
I have process train application composed of three page, each page is based on an entity
1) i fill the first page
2) i fill the second page
3) i fill the third page and invoke COMMIT
There is a database trigger Busniess rule on the table of the second entity that raises an error!
and therefore an exception is thrown
To fix the business rule error, a value needs to be modified in the first page,
I assume that the posting sequence has already posted the first entity
The error occured while posting the second entity, therefore, the second entity is not posted to the database, No rollback is issued by the program because i want to allow the user to go back to the first page and fix the error rahter than filling a page again
my question is
now i have three entities in the transaction list of the Application Module
1) the first entity successfully got posted and now it not dirty
2) the second entity is rolled back in the database and i do not know what is status is going to be in the Application module transaction object
3) the third enitity is never reached
(no rollback is issued by me)
I handled the error and allowed the user to navigate back to the first page, the user fixes the Business Rule violation and commits again,
now a new posting cycle will start
Will the framwork try to post the first entity to the database again, (it is already posted) or it will understand it is already posted and try to update it. it seems it is trying to insert the row again as i am getting PK violation?
I disabled database triggers and repeated the situation where the business rules are enforced using beforeCommit() and setting the jbo.txn.handleaterpostexc, things worked better, but the same database triggers handle other application and i cannot just disable them

Hi Dhana,
I think it's not possible to use alert. But You can use UDF Marketing document and Formatted Search to show the Downpayment Balance. I'll give you query sample to get the Downpayment Balance :
SELECT Sum(T0.PaidSum) - sum(T0.DpmAppl) FROM ODPI T0 WHERE T0.[CardCode] = $[$4.0.0]
HTH,
YunPho

FB60--When i posting invoice i am geeting error

hi All
I created with Tax Codes
When i am posting FB60
I am geeting error
Could not determine the year for TDS certificate number range
pls help me
when i double click error i am geeting material .
but, i could not understand .
pls suggest me .
Diagnosis
The excise year could not be determined for generating the numbers for TDS Certificates. The number range is linked to the Excise Year and not on the financial year directly .
System Response
Process Stopped.
Procedure
Check the customisng done for the company code in the India version IMG. Maintain the start month for the excise year correctly .
Thanks
supriya

Dear Supria,
Please make sure that you have made the following settings..
1. Please check if your are using EWT functionality
SPRO/FA/****/WT/EWT/COMPANY CODE/ACTIVATE EXTENDED WITHHOLDING TAX. Please check your company code having checkbox with checked.
If check box is checked then you are using EWT functionality Then you have to maintain Number range for TDS certifiates. use the below path and node.
SPRO/FA/****/WT/EWT/POSTING/INDIA/WITHHOLDING TAX CERTIFICATE FOR VENDOR AND CUSTOMER/MAINTAIN NUMBER RANGE.
Else you are in Classic TDS
Then please Maintain the Number range at below Node
SPRO/FA/****/WT/WT/REPORTING/INDIA/MAINTAIN NUMBER RANGES
Please assign points if it useful.
Regards
Ravinagh Boni

While posting f-53 i getting error missing table T043G

Hi
while posting F-53 i getting error "company code" is Missing table T043G.
What can i do for this.. can u advise this.
Thank u
anil

hi anil,
you are not given the tolerance group for customers/vendors, give the tolerance group for the same and try it.
also give the gl tolerance,
try t.codes oba0, oba3
pls award points.
Raghav

RSCRM_BAPI inconsistent error

Hi,
I have a problem with transaction RSCRM_BAPI.
If hi create a new extract in a table this error message appear:
<i>Metadata for extract /BIC/0CZ_STET_T is inconsistent
Error 0 when generating from extract /BIC/0CZ_STET_T
Metadata for extract /BIC/0CZ_STET_T is inconsistent
Error 0 when generating from extract /BIC/0CZ_STET_T</i>
Anybody can help me?
Michel

Hi Michel,
there are a lot of restrictions on objects to be used in query for Tcode RSCRM_BAPI, please check the corresponding How To doc in www.service.sap.com/bi in previous release section.
I think you are using an object not allowed for RSCRM_BAPI extraction.
Ciao.
Riccardo.

Ajax Post to .cfm throws IIS 500 (but same post to .aspx does not error)

I have a cross domain ajax call properly set up and tested to resolve to a .cfm but IIS throws a 500 error.
Here is the scenario:
On one domain (a.tld) I have an ajax application.
This application posts to another domain (b.tld).
When a.tld posts to a .cfm on b.tld, I get a 500 error. But, when a.tld posts to a .aspx on b.tld, it returns just fine. Both the .cfm and the .aspx are returning a single json name value pair (really just some text).
Now, this is interesting, when I switch the POST to a GET, the .cfm works just fine. So, to summarize:
1. ajax POST to aspx works fine.
2. ajax POST to cf gives 500 error.
3. ajax GET to cf is fine.
So, this appears that IIS is blocking ColdFusion from getting the cross domain ajax call or that ColdFusion does not have permission to act on the POST. Does anyone know what might be causing this issue?

Have the same problem. Ajax and Post do not play well together. Last I checked it is a browser problem.
Using “GET” is a problem too if you need to ajax a lot of data. .
If you are using the ajax to validate a page, a good work around is to open a dhtml iframe window (see http://www.dynamicdrive.com/dynamicindex8/dhtmlwindow/index.htm) and then do the validation in popup window.
As you are validating, use cfflush to show what’s going on:
Checking value 1: Pass
Checking value 2: Pass
Checking value 3: Fail - date range is not valid.

Post PGR at Inbound delivery error

Hi guys
We are trying to Post PGR at Inbound delivery
Error : E M7 022 10 PL Stock in transit exceeded by 1 00 : 2182597
Please suggest a solution
Thanks in Advance
Satyam Madhu babu

you have less stock in transit than you would like to receive.
so you can either receive one less or post one more into transit before you receive.

Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

New Installation of R12.1.1 on Linux x86-64
using zip files from e-delivery
created staging dir successfully
Ran rapidwiz
selected new Installation and Express Installation
Rapidwiz worked and installed all files but it failed at the end during validation for post install
when showed screen for Validate System Config the post-install check:
I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
details of error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
some other facts,
I cannot run sqlplus, no access to database.
it seems environemt variables are not set as echo shows empty value.
since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
tried solution 1:
I was able to run APPSVIS_localhost.env
however i canNOT connect to sqlplus
therefore no access to database:
pwd
/d01/oracle/VIS/apps/apps_st/appl
[root@localhost appl]# chmod 777 APPSVIS_localhost.env
[root@localhost appl]# ./APPSVIS_localhost.env
[oracle@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
[applmgr@localhost bin]$ ./sqlplus
./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
[applmgr@localhost bin]$
when echo oracle env variables they are all empty:
for example:
[oracle@localhost scripts]$ echo $APPL_TOP
Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
couldn't even use script v as I got error:
[oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
[oracle@localhost scripts]$ ls adst*
adstpall.sh adstrtal.sh
[oracle@localhost scripts]$ ./adstpall.sh apps/apps
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE:      adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
also in another question in forum
RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
it is asked to try this:
... commented out the following line:
#eval ohs_start -DSSL "$args"
... and replaced it with:
eval ohs_start "$args"
I have not tried this, i think my issue is with database and sql which cannot be accessed.
solution 2:
Tried workaround from Note 943443.1
but first i cannot see any file with # ls libdb*:
[root@localhost inst]# cd /usr/lib
[root@localhost lib]# ls libdb*
ls: cannot access libdb*: No such file or directory
after running the command from the Note:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
now, I can see libdb.so.2:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ls libdb*
libdb.so.2
then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
but still fails with same error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
solution 3:
tried to stop and restart services:
[oracle@localhost VIS_localhost]$ pwd
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
[oracle@localhost VIS_localhost]$ ls -ltr add*
-rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
-rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
your help is highly appreciated
thank you!

Thank you
items 1, 2 and 3 are answers to your questions,
I think you pointed to an important section as i have feeling something is
wrong with this simple default choice of localhost.localdomain.
please also see #4 as it has new information (the rapidwiz error are fixed now
but i still don't have access to anything)
1-) file: /etc/hosts
i have 2 lines in this file
[oracle@localhost etc]$ pwd
/etc
[oracle@localhost etc]$ cat hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost localhost6.localdomain6
[oracle@localhost etc]$
2-) file: /etc/sysconfig/network
i have 2 lines in this file:
[oracle@localhost sysconfig]$ pwd
/etc/sysconfig
[oracle@localhost sysconfig]$ cat network
NETWORKING=yes
HOSTNAME=localhost.localdomain
3-) per step 3- of note 761564.1 I deleted file (using root accout):
/etc/sysconfig/networking/profiles/default/network
(before deleting i made a backup network-bak, just in case):
[oracle@localhost default]$ pwd
/etc/sysconfig/networking/profiles/default
[oracle@localhost default]$ ls -ltr
total 16
-rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
-rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
-rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
-rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
[oracle@localhost default]$
4-)
I made so many changes to dir access permissions using chmod 777,
also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
the errors),
then I clicked Next button ( which of course went to the same screen I had error on )
then I clicked on Retry button and it appeared it fixed errors.
Rapidwiz confirmed all sections are ok,
no errors anymore.
(Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
then Retry button).
I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
but right now, I completed rapidwiz and all errors are fixed,
however I still don't have access to anything:
Started firefox and try to go to:
http://localhost.localdomain:8000/QA_HTML/AppsLogin
it says Unable to connect
(by the way do I have to download IE and try in there or should it work in Firefox as well ?)
I am unable to run sqlplus
I don't have anyvalue in the environment variables, they are still empty.
I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
2.2
[oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
AutoConfig completed with errors.
2.3
[oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
     Configuring IES_TOP.......COMPLETED
     Configuring CSD_TOP.......COMPLETED
     Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
still same problem, didn't change results.
Thank you for your help!

MR11 GR/IR Posting Error - PO History Inconsistent - error message M8278

Similar Messages

Maybe you are looking for