MRBR list - Docs not displayed even if there is a block

Hi Gurus
Even if there are quantity and prices blocks in the MM doument , the MRBR list doesnot display the blocked documents.
As a result we are not able to release the documents and remove the block.
1. What could be the possible reason for this?
2. And is there any other way to remove the block on MM document without going through MRBR.?
3. Also if the Invoice is cancelled than the cancelled invoice too has the block in it.
Than does the cancelled invoice is shown in the MRBR list?
Early Response is highly Appreciated
Thanks a Lot
Rgds
Points would be rewarded definately....

Hello Rutvj,
A payment block can be removed on the FI side and still remain on the MRBR output. You can verify by viewing the change history on the accounting document that was posted as a result of the MM invoice. If this is the case, you would have to manual release the block in MRBR. Typically the process would be to resolve the issue thru MM resolution depending on the type of block.
If you decide to cancel the MM invoice, the originating invoice would be removed from the MRBR output.
Hope this helps.

Similar Messages

In firefox, the video from website "tv.vu.edu.pk" is not displaying even i have installed the latest version of JAVA. There rotates a circle around java monogram every time but video is not playing even it is working fine with internet explorer

In firefox, the video from website "tv.vu.edu.pk" is not displaying even i have installed the latest version of JAVA. There rotates a circle around java monogram every time but video is not playing even it is working fine with internet explorer

It's not working here as well with Java 6 U25 on Linux.

SAP NW CE 7.11 Service Registry lists is not displayed

Hi experts,
I have a problem that Service Registry lists is not displayed in CE 7.11.
I deployed componts relate with Enterprise Service Repository. (SAP_XIESR,ESREG-SERVICES,ESREG-BASIC) and executed task "Configuration of ESR in CE" in Configration Wizard.
But I can`t stil see WSDL Port Type name lists in Service Registry.
Please tell me any idea.
For reforence,
SAP CE 7.11 SP06
Thanks and regards,
Jun

Hi Srikishan
Thanks for reply.
I have activated SAP* user & then able to login in NWA.
But found that UMEBackendConnection RFC is already present in Configuration Management -->Security Management -->Destinations & connection test also successful.
When I reverted changes & tried to start the java again got the same error.
JCO_ERROR_RESOURCE: Destination UMEBackendConnection does not exist".
So here,I think that Java unable to connect or identify backend destination.Is there any way we can bypass this check?
Regards,
Mahesh Phegade

SAP NW CE 7.11 Service Registry lists are not displayed

Hi experts,
I have a problem that Service Registry lists is not displayed in CE 7.11.
I deployed componts relate with Enterprise Service Repository. (SAP_XIESR,ESREG-SERVICES,ESREG-BASIC) and executed task "Configuration of ESR in CE" in Configration Wizard.
But I can`t stil see WSDL Port Type name lists in Service Registry.
Please tell me any idea.
For reforence,
SAP CE 7.11 SP06
Thanks and regards,
Jun

Hi,
Although I have not encountered this error in my installation copy - you can try the following:
Take the zip file for NWDS to another machine and install it. If you do get the same error - then the zip file was damanged in the transfer - if not then probably it is an issue with the Microsoft Installer files that you are using. If you are using a legal version of Windows then upgrade to the latest updates and then try again. You can try the same steps after shutting down and restarting your PC.
Most probably the zip file is damaged since the MSI has run successfully.for the CE WAS.
p256960.

In IP24 notification number is not displayed,even tough the order generated

In IP24 notification number is not displayed,even tough the order generated against the scheddled maintenance plan has the respective notification

Hi,
If you have Order and Notification Integration in spro ->PM->Maintenance and Service Orders -->Funcations and settings for Order types -->Define Order and Notification Integration .. then i believe u should be getting Notification number also when order is created ..
regards
pushpa

I just discovered that when I type names in Reminder, Notes or even email, there is a voice repeating the name. Any idea how to disable this function?

I just discovered that when I type name in Reminder, Notes or even email there is a voice repeating the names. Any idea how to disable this function? I never heard it before!! Thanks

I think that you have turned on VoiceOver. To turn it off, enter settings, general, accessibility and turn off VoiceOver.

I just discovered that when I type names in Reminder, Notes or even email there is a voice repeating the names. Any idea how to disable this function? I never heard it before.

I just discovered that when I type names in Reminder, Notes or even email there is a voice repeating them. Any idea how to disable this function??? I never heard this before and I have the iPod Touch since a year!. Thanks a lot.

You have an Accessibility feature turned on. Go to Settings>General>Accessibility and turn off/check off:
VoiceOver
Speak Selection
Speak Auto-text.

Wifi not displaying even thought wifi network is available.

i installed lan drivers related to my laptop version hp 15 r204tu. even after that wifi icon is not displaying in my laptop.Please help me in this issue.. Note: recently i changed the os from win 7 ultimate to win 7 professional. Earlier it is fine.

Hi , Welcome to the HP Forums! It is a terrific place to find answers and tips! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More I understand that after changing your OS form Windows 7 ultimate to Windows 7 professional your wireless is not working. You have installed the lan drivers but it did not help. After installing Windows 7 professional have you done all your Windows updates? Have you ran the Windows troubleshooter? I suggest you check for any recommended HP updates.Go to the HP Notebook - 15-r204tu Software and Drivers and click the check now option. This will allow it to scan your system and provide a list of any recommended software and drivers. If you check Device Manager is there an error on the network adapter?If you connect with an ethernet cord do you have any issues. Here is a link to HP PCs - Troubleshooting your wireless network and Internet connection (Windows 7) that should also help. To show appreciation for my replying please click the thumbs up button below.If this resolved your difficulty, please inform, people by choosing solution provided. Best of Luck!

Reg: Drop-Down list Box not displaying values

Hi Experts,
i am publishing a module pool program in the internet using SICF Transaction . In the internet my drop down list box is not displaying the default value but in my sap it works fine .
What may be the problem?
Regards,
Vikram

Hello Thorsten Domsalla ,
My Problem is in my sap module pool program there is a drop down list box which disaplays default values its working fine in sap gui but when i access through internet (SICF) Transaction the Drop down list box not listing out default values .
i am using Integrated ITS Version 7.0 and Support package 08.
Regards,
Vikram

Email list will not display individual addresses and names , only name of list.

First time user of lists. I created a new email list per help instructions-- created just fine. When I try to use it to write, no matter which methods I use, only the list name is displayed. It does send the email to all the addresses, but I want to be able to see all the individual addresses so bcc or removal etc. can be used prior to sending. Any suggestions?

Does the list description include spaces? If so, try to use a name without spaces or replace spaces with "_", there has been a bug about this reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in the similar support requests to yous, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
Is that what you see?
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
* Downgrade to a previous version and disable automatic updates (Windows)

USB not recognized - even when there's no USB device at all (Windows 7, Pavilion dv7)

Since a few days now I get the message
'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'.
It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..
Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
Anyone has any idea?
Thanks
HP Pavilion dv7 Notebook PC
LE902EA#UUG
Windows 7 64 bit
This question was solved.
View Solution.

The solution can be found here

Af:SelectManyShuttle trailing list does not display initially any result

I use af:selectedManyShullte component as follows:
<af:selectManyShuttle value="#{backing_shuttle.selectedValues}"
leadingHeader="Available"
trailingHeader="Selected"
partialTriggers="funds" leadingDescShown="true"
trailingDescShown="true" valuePassThru="true">
<f:selectItems value="#{backing_shuttle.allItems}"
id="selectItems2"/>
</af:selectManyShuttle>
backing_shuttle is based on tutorial ShuttlePageBackingBeanBase managed bean class that uses functionality from ADFUtils class.
I've configured managed bean properties in faces-config.xml and running jspx file I can see that ="#{backing_shuttle.selectedValues}" are being filled with data. However when a page appears there is initailly no data under the trailingHeader (panel). #{backing_shuttle.allItems} is being filled and that is being shown correctly on a panel.
Any help would be appreciated

This is solved, only values that appears in leading list can be displayed in the trailing list. However I have now problem with selectOneListbox adf element.
The list is dynamically rendered from iterator and I assigned managed bean method to ValueChangedListener but this method is not being called when other value from the list is selected. So now the model is not being refreshed.
Thx

Video icon in buddy list does not display when iChat not running?

I have my father-in-law's computer setup to automatically log into iChat when he turns on the computer. However, it does not say he can video chat (the icon does not display) until he actually opens iChat. Is there any way around this? The only thing I thought of was to get iChat to open at login and just not display the buddy list.
Basically, I want him to be available to video chat with his grand daughter...but he doesn't need to see the buddy list or the app for that matter. She would initiate all chats.
Thanks
Brian

I am trying to imagine what you have done here.
It is possible to have iChat as a Login Item.
It is possible for iChat to start Up with the Buddy Lists hidden.
From there Chats can be started from the File menu or Apple key and N together.
To do it this way you have to know the Screen Name of who you are calling.
You should be able to accept incoming A/V chats.
9:46 PM Thursday; January 10, 2008

Background graphics and link icons do not display even after downgrading flash, emptying cache, reinstalling recent and older versions of firefox

sometime today, firefox 14 began not displaying the background graphics and link icons on every site I went on from my laptop. It would display this information when I changed the rendering engine to the explorer platform. I have removed the flash player 11.3 from the computer; re-installed flash 10.3 recommended from the troubleshooting page; restarted the computer; same problem. Did the same with the Java plug-in with the same result. Disabled all extensions and restarted Firefox with no change. Examined the sites on a different laptop using version 10 of Firefox and everything worked fine! Reloaded older version of Firefox on original laptop, restarted computer, same problem on older version. Updated to latest revision, listed below, and same problem. Went to desktop computer using version 14, and same thing is happening there also. (I have not done anything to this system yet.)

All of the items contained in both of the reference documents were already active on each system. I have created a zip file with four screen capture pictures showing what I'm dealing with. The first picture shows what the site looked like yesterday morning; the second shows what happened when I refreshed the screen this morning; the third shows what happened when I switched the rendering engine on the same tab this morning; the fourth shows what happen when the tab was switched back to original rendering engine. The file is at:
[http://charisacademy.org/pictures.zip This location]
Please consider this for a moment: I am having to answer these questions from you using my iPad because the graphics at the top of this window which control the type-input will not display in Firefox while the post buttons will. Let me know if you can't get the picture file and I'll find another way to get it to you.

Accented characters do not display correctly if there is a variable beside it

Hello,
We are experiencing a problem when we have text with accented characters an a variable beside it within the same text box.
The problem is that the accented characters in the text do not display correctly in the preview or publised course to Flash9
These characters display correctly in Captivate in edit mode.
This is the process we have followed:
Export to XML
Translated
Import XML
Publish to Flash9
Captivate version: 4
OS: Windows Vista SP2
We have tried to work with locale in Spanish with no luck, the only solution we have found is to put the text and the variable in different text boxes
I have pasted an image of the preview and also of the text in Captivate edit mode.
Any help will be very welcomed !
Tess

Hi there
I agree with Lilybiri that you should definitely file a Bug Report.
However, a thought occurs here. Have you tried placing the accented text in a User Defined variable?
Assuming this is a workaround, my thought is that you could then just have a caption with two variables. The User Defined variable containing the accented text followed immediately by the system variable providing the Project Name.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

MRBR list - Docs not displayed even if there is a block

Similar Messages

Maybe you are looking for