MRBR show incorrect Difference value

Hi ,
In MRBR, we have an invoices is blocked due to price differences. (exceed limit of 1.00)
In MRBR screen, the difference value column is only show as 0.83;
GR: 182.04
IR: 183.15
difference value = 1.11
The invoice has blocked, but it display wrong difference value which is 0.83, it should be show as 1.11 in MRBR screen.
May I know how does the system derives the "Difference value" in MRBR?
Thanks

HI,
Any suggession?

Similar Messages

0weekday1 is showing incorrect values

Hi,
After the upgrade it has been noticed that the Time characteristic 0weekday1 is showing incorrect text mapping in Bex Reports reports.
After analysis and Investigation I found that
In master data it is maintained as follows which is correct
1 - Sunday
2 - Monday
3 - Tuesday
4 - Wednesday
5 - Thursday
6 - Friday
7 - Saturday
But In the multiprovider, when I do F4 on the filed 0weekday1 it is showing the following values
1 - Monday
2 - Tuesday
3 - Wednesday
4 - Thursday
5 - Friday
6 - Saturday
7 - Sunday.
In RSRV it is showing inconsistencies but when I tried to do the correction it is failing.
I have done the info Object repair for 0weekday1 in RSD1. but still the values have not changed.
Please suggest resolutions to this !!!
Thanks,
Shantanu.

Hi,
When I see the master data it is maintained properly as stated above.
But, when I checked the Master Data Read class, it is found that the data is coming from T246 table which is SAP maintained table. And the entries made in T246 table are the one which are incorrectly mapped.
So, my questions are:
1. Can we change the values directly in T246 table.
2. What other programs/objects, etc will be impacted.
3. Do we have something as "Where used list" for the Tables.
Thanks,
Shantanu.

Query key figures showing incorrect values

Hi,
key figures in my query are showing incorrect values NO CALC POSSIBLE
Data in the cube is coming from different datasources and the cube is compressed.
this is how data in the cube looks like
plant    Unit   currency    Stock Quantity    Stock Value   total ( *** key figure ( inflow and outflow)
P001    ST                         1000                   0
P001             EUR                                    100
Query result
plant       stock(PC)            Stock Quantity   Stock Value       total ( cumy figure ( inflow and outflow)
P001       No Cal possible    1000                  100                   No Cal possible
How do I resolve in query or cube level so that the NO CALC possible is not displayed.
thanks

Hi,
Indeed my cube is a copy of 0IC_C03.
Could you please explain more about the filtering.
I have the following key figures
0TOTALSTCK
0ISSTOTSTCK
0RECTOTSTCK
ZISSSTCK_VALUE
ZREC_VALUE
ZTOTSTKVALUE
ZTOTSTKVALUE is CKF with inflow and outflow of ZISSSTCK_VALUE
ZREC_VALUE
Whenever there is 0 it displays NO CALC possible. I would like to have it blank or 0s.
thanks

Report to correct FD33 report is showing incorrect values ??

Hi Guys,
Will appreciate your help on below issue.
The "RVKRED88 - Reorganization of SD credit data after updating errors" report is showing incorrect values.
It is specially observed for invoice correction requests that are credit blocked.
The doc flow is like Order (say value 1000 $), delivery, shipment, Picking, GI, billing, accounting all cleared/complete.
The invoice corrrection req (say value -ve 50$) was then created with reference to the billing doc.
The RVKRED88 report shws the original order as open and also shows an open delivery value of 1000$ + 50$= 1050$.
Is this behaviour correct? If not what might be the cause of this? and how to correct it?
Regards,
Naminator
Edited by: Naminator on Jul 7, 2009 6:22 PM

I am not sure, how come you are getting correct numbers for UK plant if BX is not loaded. You can get numbers correctly only in one situation which is your initial stock at that plant was ZERO, which is practically not possible.
You said you are loading for Denmark only.
Was the BF init done only for UK?
How come you are loading BF Delta for UK only?
Did you check properly that BX is not loaded into production by changing the date range. Make sure you put the lowest date range in the from field. I would put 01/01/1000
As you said ISS is coming right because those are movements and they dont have to do anything with initial stock, but initial stock and movements affec your Total Stock Key Figure.
- Danny

The Report returning incorrect Invoice values

Hi,
When we are executing a particular report in BEX, it is returning incorrrect values for a few PO numbers for the field invoice values .The rest of the PO's have correct invoice values.
I have checked in the cube and ODS and it has the same incorrrect values for these PO's.But in R/3 system, when i check the respective PO ,it has correct values in the TCODE ME23N.
But in BW system , it is showing incorrect values.I tried to view the same PO Number in the datsource in RSA3. But here when i extract the data and check the output list, I could not find the PO which i am looking for.
Also, can you please tell me.How can i check the respective PO's in RSA3.Is there any different approach.
Do provide soem inputs.
Thanks,
Samir

Hi Samir
In RSA3,do you have selection on PO,if so then you can give that particular PO and extract and crosscheck.
Orelse if you have selection on 0FISCPER,and if you know when this PO has been created then give that period and extarct,there you can able to find that particular PO
If the values in ODS and cube are incorrect,then you need to crosscheck first in PSA( in the staging layer),since in PSA you will get the raw data exactly the same as in the source system
Regards
Jagadish

How to save the difference values in cube after planning functions.

Hi,
Now i am facing small problem but it is tricky..
in BPS reading the actual value and modifying the actual value in my plan layout and storing the plan values in my transactional cube.before saving the data i am checking the difference between actual and plan value and that difference value i am saving into my cube.here i am using two planing function one is distributing the actual value into my weeks(using fox code i done)after distributing now i am using second planning function to calculate the difference values.but in my layout alwyas i have to show distribute values only.not difference values but in cube i have to save difference values how can i manage this situation.
Thanks...

Hi,
Now i am facing small problem but it is tricky..
in BPS reading the actual value and modifying the actual value in my plan layout and storing the plan values in my transactional cube.before saving the data i am checking the difference between actual and plan value and that difference value i am saving into my cube.here i am using two planing function one is distributing the actual value into my weeks(using fox code i done)after distributing now i am using second planning function to calculate the difference values.but in my layout alwyas i have to show distribute values only.not difference values but in cube i have to save difference values how can i manage this situation.
Thanks...

BUG: Info panel displays incorrect Hue values

Recently, I've been doing a lot of work with color in Fireworks and came across the following bug, which appears to be a longstanding issue within the application. Rather than keeping it to myself, I figured I'd post it here in addition to submitting a bug report with Adobe. So here it is...
Hue values displayed within the Info panel (in HSB mode) do not consistently match the values displayed in the Color Mixer panel—including basic colors such as pure Yellow, Cyan, and Magenta. The values are 1 degree off—most often below the Color Mixer value, but sometimes above (as with Magenta). This holds true whether using with the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
For example, the following inconsistencies were observed when sampling the centermost horizontal strip within CS6's default Color Cubes swatches picker. Note that over 50% of these colors are affected by the issue.
The Color Mixer seems to display the correct values, while the Info panel's values appear to be incorrect. Note that this issue affects the HSB mode only; the RGB and Hex values are consistent between both panels.
This bug has been observed in Fireworks CS6, Fireworks CS5.1 and Fireworks 8 on Mac OS 10.6.8 (Snow Leopard).
Here's the bug report submitted for this issue:
Product name: Fireworks
Product Version: 12.0.0.236
Product Language: English
Your operating system: Mac OS 10.6.8 (Intel-based)
******BUG******
Concise problem statement: The Info panel displays incorrect Hue values for many colors—including pure Yellow, Cyan, and Magenta. The Hue values are usually 1 degree below the value displayed in the Color Mixer panel (e.g., 59 instead of 60 for Yellow) but sometimes 1 degree above (e.g., 301 instead of 300 for Magenta). This is true whether using the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
Steps to reproduce bug:
In an open Fireworks document, open the Info, Color Mixer, and Swatches panels. Within the Color Mixer and Info panels, set the color mode to HSB.
Draw a Rectangle and set its fill to Yellow (#FFFF00) using the Color Picker.
Observe the Hue values displayed in the Color Mixer and Info panels.
Select the Eyedropper (I) tool, and sample the rectangle's fill color. Again, observe the Hue values displayed in both the Color Mixer and Info panels.
Results: In both steps 3 and 4, the Hue value for pure Yellow (#ffff00) appears as 60 degrees in the Color Mixer panel but 59 degrees in the Info panel.
Expected results: The Hue for pure Yellow (#ffff00) should appear as 60 degrees in both panels.
Note that this issue affects the Info panel's HSB mode only; the RGB and Hex values are consistent between panels. Also note that this bug affects over 50% of the "pure" hues within CS6's Color Cubes swatches palette. For more info, see the following forum post:
http://forums.adobe.com/thread/1083391
This bug has been observed in Fireworks CS6, CS5.1 and FW8 on Mac OS 10.6.8 (Snow Leopard).

I haven't done anything other than add my footage to the timeline. I have 2 layers (1 targa seq and 1 png seq). As I move my mouse from the Timeline to the Comp Panel, the color values flash for a split second and go away. If I press Opt+1 (2, 3, and 4) the Info Panel displays the color for that one pixel but the values go blank as soon as I move my mouse. This happens in the Comp Panel mostly. If I open a Footage or Layer Panel, sometimes the values show, sometimes not. Never had this issue in previous versions.

Building an array of difference values

Dear Forum Members,
With reference to the attached LabVIEW 2010 Student Edition file....
From the incoming data via the .csv 'Read From Spreadsheet' I want to display an array of the difference between the n and n-1 data value i.e. if the data set is 10, 20, 25, 35, 50 then the difference will be 10, 5, 10, 15.
I have used the 'Index Array' function to extract the n and n-1 data values (using the 'Simulation Time' function as the Index Row incrementer) however I cannot find the way to build an array of these difference values and display them in the Front Panel i.e.
10
5
10
15
This will no doubt be a trivial issue for those more experienced LabVIEW programmers. Any advice or assistance will be gratefully received.
Kind regards,
Solved!
Go to Solution.
Attachments:
Plant_Simulator (04-05-2013).vi ‏158 KB

I'll explain what I want to do again for clarity....
I have a simple spreadsheet file (in .csv format) that contains one (1) column of data x 800 rows (thats 800 elements). I read the data into LabVIEW via the 'Read from Spreadsheet' function (I have already established this). I then want to make an array that is the difference beween the n and n-1 data value. Hence if the data set is 10, 20, 25, 50... then the difference will be 10, 5, 25..
I want to display the difference array to screen in an indicator that shows all the difference values in one (1) column x 799 rows. Hopefully that explains what I want to achieve.
I tried the suggestion with the loop however there were multiple errors when this was attempted. I cannot place the loop within the simulation frame (it doesn't allow it) hence its outside.
Please excuse my inexperience concerning the array order(s), I find LabVIEW to be particularly unfriendly in this respect and its the source of much of my frustration and pain whenever I'm using LabVIEW to implement anything.
Regards,

Customer age analysis showing incorrect aging

Hi All
We have a rather complicated scenario, we captured journals for customers some of the journals are back dated , so when we check the aging it has incorrect info on some of the suppliers and others are showing correct info.
I've checked the payment terms and they are set to 30 days (start from month end + 1 Month)
Others are showing correct figures under correct columns and others are showing incorrect instead of showing under 0 -30 (correct) and then the others are showing 31 - 60..(incorrect)... they both belong to the same posting month.
Regards
Bongani Dlamini

Hi Bongani Dlamini,
Your question is not very clear to me. Which customers are showing incorrect figures? Any patterns have you notices? What are the differences you could find it out?
Thanks,
Gordon

Asset report S_ALR_87011963 is not showing the asset values for perion 08

Hi,
The internal order number is 400011.The amount 38,300 were booked on this order. I have settled 38,050 into 7 assets hence the balance is 250 in this internal order (Work in progress 100050).
When i check the Asset expolorer, there it is showing me this remaining value. But when i run any asset report, say Transaction code - S_ALR_87011963(Asset balances) with report date as 30/05/2008 for period 8, the asset 100050 is showing as NIL Value. But if i run it with date as 30/09/2008 for period 12, then it is showing the balance amount.Our fiscal year is frorm Oct- Sep.
I don't understand why this difference is coming. It should show the balance 250 at the end of period 8.
The last input on this internal order was in March 08 when I transfered most of the costs to the assets.So no reason to have a difference depending on the date of the report.
The internal order 400011 is having status as Released at present.
Can anyboday help me on this. Points will awarded.
Earliest reply will be highly appreciated.
Regards,
Shree.j

Hi Rau,
Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
Thank you ,
Paarthaa...

COPA report showing as positive values which should be show as Nagitive val

Dear Experts
I have one issue with COPA and Profit center reports reconciliation where the both have same structure
user compareing the (Period :dec 2011) report PCA and COPA there identified some values are difference so we started investgation
one of the cost element showing in nagitive value in accoungint document and same it is showing postive value in COPA report
that values for debit and credit line items are adding (,) insted of Cancellation (+,-) , so that COPA report is incresed the value for one value field when compare with PCA report line items
could you please let any guide me where is the problem is occuring
thanks
Rana

Hi,
   The COPA sign logic depends on the cost element type used (costs or revenues) and also the customizing of the '+/- transfer sign' in tcode KE4I.
The following table shows an overview of how condition values are
updated in CO-PA for billing documents from SD:
Billing document (normal) "With +/- sign"    "Without +/- sign"
Debit posting                          negative            positive
(such as sales deductions)
Credit posting                         positive            positive
(such as sales revenues)
Credit memo/return         "With +/- sign"    "Without +/- sign"
Debit posting                          negative            negative
(such as sales revenues)
Credit posting                         positive            negative
(such as sales deductions)
The "+/- sign" refers to the "Transfer +/- sign" flag in tcode KE4I where you assign SD conditions to COPA value fields.
If the system is behaving as shown above and you want a different behavior then you could change the sign in user exit COPA0002.
regards
Waman

Report Viewer shows incorrect data when viewing pages from last to first

Post Author: Fmorales
CA Forum: .NET
Hello.
I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one...
In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
WhilePrintingRecords;
CurrencyVar margenActual;
which is being increasing or decreasing along the group:
WhilePrintingRecords;
CurrencyVar actual:=actual+CurrentFieldValue;
if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then CurrencyVar margenActual:=margenActual-CurrentFieldValueelse CurrencyVar margenActual:=margenActual+CurrentFieldValue;
DefaultAttribute
It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
In the inner section I reset the actual value (this value always go fine):
WhilePrintingRecords;
CurrencyVar actual:=0;
Before end of year I reset the margenActual value:
WhilePrintingRecords;
CurrencyVar margenActual:=0;
I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
Any idea?
Thanks a lot

quote:
Originally posted by:
ntsiii
If you were previously using <mxXML> you WERE using
e4x.
So remove that tag, create an instance variable of the same
name, typed as xml, and in your result handler, do as VarioPegged
suggests, though I would cast/convert to xml first:
companies = XML(event.result);
trace(companies.toXMLString()); to look at your xml
var xlCompanies:XMLList = xmlCompanies..company; //all such
expressions return XMLList, never XML
trace(xmlCompanies.length()); //
Tracy
Ok so the ID of the mxXML was being interpreted as an E4X
variable at compile time?
I tried changing the name of the ID of the HTTPService call
from "marketData" to "MDATA" and assigning the variable marketData
to the result of the HTTPService query, which if I understand you
correctly should basically make everything work as it was before,
but it seems to be a problem.
when I try to run it puts an exclamation point on this line
<toolbox:TreeMap id="treeMap" width="1200" height="800"
dataProvider="{marketData}"
labelField="@cname" weightField="@amount"
colorFunction="{itemToColor}"
toolTipFunction="{itemToToolTip}"/>
That code refers to a SWC file. Apparently it wants
marketData to be a data provider. If I change the dataProvider
reference above to "MDATA" (the ID of the HTTPService) the App
compiles, but I get two errors at runtime:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
ReferenceError: Error #1081: Property @age1 not found on
mx.rpc.http.mxml.HTTPService and there is no default value.
What should I change this reference to? It won't compile if I
use the variable I made for the e4x results and it is reading
gibberish if I have it read directly from the
HTTPService....?

Search results showing incorrect modified date

Hi All,
I have a one difficulty in search results.
Document showing incorrect modified date in search results. And this happens for one document only.
We have customized the search/results.aspx page, Our document is showing correct modified date in document properties,All Items.aspx like 31/4/2013.
But when i search with document name in search, result showing incorrect modified date like 24/6/2004.
I checked with database in SQL, every thing is fine.
I have updated the Modified date through powershell script for one document and after that this recent modified date is showing in search results.
But after updating the Modified date through powershell, issued document not showing the recent modified date in search results. still showing as 24/6/2004.
I should not do edit property and save, to create new version.
I don't know what is happening in search crawl. All ready full crawl running daily basis.
I want to check whether this issued document is crawling or not. Could anybody help me to get out of this. what is the main cause of this issue.
Thanks & Regards
MD.Liakath ali

Hi,
I'm seeing the same issue after upgrading the SharePoint 2010 to SharePoint 2013.
When I search any upgraded document in SharePoint 2013, the document's "Last Modified Date" was showing an incorrect value in Search Results page but other metadata of document like "Last Modified User" is showing the correct
value so the problem is not with document crawl, something wrong with Last Modified Date property in Search results.
I have seen below comment as answer but I didn't understand the solution to fix this issue for all upgraded documents.
The most likely cause is that there is metadata on the documents that is set to that date which is overriding the other dates in the search result. SharePoint isn't particulary imaginative so it's got to be finding that date from somewhere.
Do we have any solution for this issue? Is this issue will be addressed in SharePoint 2013 SP1?
Note: No issues with documents, which uploaded after upgrade.

Compares two tables S780 and S720 by material , Print the Difference value

Hi abapers,
Report which compares the two tables S780 and S720 by material
the Statistic currency value of these two tables if show the differences
the report should display only Diffrece value:
The selection should be by
Revenue country, Salesorganisation , month and version
output like this
Material Value S720 / Value S780 / currency difference should be print out.
Regards
Raj

Hi
Use join or for all entries
then move the records into a final table
loop at itab
then get the difference.
modify the itab by transporting the difference.
Regards
Shiva

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

MRBR show incorrect Difference value

Similar Messages

Maybe you are looking for