Mreport sevices component down in OEM
hello:
I have Oracle AS(10g 10.1.2.0.2) on Win2k Prof
My report services component was running fine a few days back...but now its status is set to "unknown" and I also cannot load:
localhost/reports/rwservlet
where local host is my machine where oracle AS and other components are installed
when I load this and Iget the error
nternal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
I stopped it and it stopped and then I start it and get the message that report server has been started but the status remains unknown and i cannot run my reports
between the time when it was running and now when its not running I only remember that I have added the portal component...which I deleted by running uninstall but the portal component is still in OEM...If I am clear enough can anybody help
This very urgent please ( Ihave posted the same in reports forum but getting late in having some response from there so decided to post here)
thanks
Thanks for the answer Courtney. Then may I ask, what is the meaning of that "Main File" selection box on the file page?
Similar Messages
-
Coreapplication shows as down in OEM, but all components are up
Hi,.
Just upgraded from 11.1.1.5 to 11.1.1.6.2. All went fine and everything running. Also upgraded WLS from 10.3.5 to 10.3.6
Yet the core application shows as down in OEM although system status reads All components are available
weird .....
diagnostic logs show failed to get status for java components so looks like the console isnt communicating with opmn correctly? Not sure. Everything is running out of the same box except the database.
admin server log presents:
Failed to get status of all of OPMN components for one or more Oracle Instances of BI instance: coreapplication
Any bright ideas please ping them this way!
THanks
Edited by: 869150 on 23-Jul-2012 06:20SR 3-5707809851 : Managed components missing from diagnostics after 11.1.1.5 to 11.1.1.6 in-place upgrade ==> Bug 14111737; fixed in 11.1.1.7.0.
-
Possible to reset component metrics in OEM?
Is it possible to reset the component metrics in OEM for a given composite app?
I'd like to run a baseline performance test, reset the metrics, then do a revised run & profile the change.
This is straightforward in OSB, but I haven't seen a way of doing it in OEM.
thanks
GarretHi...
If you are referring to a MobileMe account, try this support article > Mac OS X: Resetting the SyncServices folder
If instead you are referring to restarting the AMDS, for Mac OS X v10.6.8 or earlier > iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X -
PeopleSoft Target status always down in OEM Grid
Hi All,
This is my first post here. So pardon me if I make any grammatical mistakes.
I installed OEM Grid 10.2.0.4 in my machine and also installed the PeopleSoft Management Plugin in my OMS and Agent. Now after configuring the PeopleSoft targets (only Application server), I am able to bounce my application server via grid, but the staus of my Applcaition server in Grid is always down. but my application server is up and running fine.
Has anyone faced similar issue like this before?
Any inputs will be Highly appreciated.
Thanks in Advance.
Regards,
1_PSDBAHi,
Please find below for the log from emagent.trc
2008-09-22 03:08:26,066 Thread-1172 ERROR fetchlets.healthCheck: GIM-00105: file not found
2008-09-22 03:08:26,066 Thread-1172 ERROR engine: [oracle_database,PSDEV,health_check] : nmeegd_GetMetricData failed : Insta
nce Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as th
e owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database vers
ion is not 10g (10.1.0.2) and above.
2008-09-22 03:08:26,067 Thread-1172 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initializatio
n failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance
processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and
above.
2008-09-22 03:08:41,143 Thread-1175 ERROR fetchlets.healthCheck: GIM-00105: file not found
2008-09-22 03:08:41,144 Thread-1175 ERROR engine: [oracle_database,PSDEV,health_check] : nmeegd_GetMetricData failed : Insta
nce Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as th
e owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database vers
ion is not 10g (10.1.0.2) and above.
2008-09-22 03:08:41,144 Thread-1175 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initializatio
n failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance
processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and
above.
2008-09-22 03:08:52,677 Thread-5532 WARN upload: Truncating value of "COMPOSITE_KEY" from "3DA20EC2C5BC6FE3E2ADC2FC9BCD82CA"
to "3DA20EC2C5BC6FE3E2ADC2FC9BCD82CA"
2008-09-22 03:08:52,767 Thread-5532 WARN upload: Truncating value of "COMPOSITE_KEY" from "AD1B49CA54C47C5349ECA90086473EFA"
to "AD1B49CA54C47C5349ECA90086473EFA"
2008-09-22 03:08:53,022 Thread-1179 WARN upload: Truncating value of "COMPOSITE_KEY" from "83065B71422DED05AE63CFE291360A71"
to "83065B71422DED05AE63CFE291360A71"
2008-09-22 03:08:56,071 Thread-1181 ERROR fetchlets.healthCheck: GIM-00105: file not found
2008-09-22 03:08:56,071 Thread-1181 ERROR engine: [oracle_database,PSDEV,health_check] : nmeegd_GetMetricData failed : Insta
nce Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as th
e owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database vers
ion is not 10g (10.1.0.2) and above.
Edited by: user560200 on Sep 22, 2008 2:21 AM
Edited by: user560200 on Sep 22, 2008 2:22 AM -
Targets down one OEM 12c console
I have successfully installed OEM 12c on RHEL6, it is a 3-node using F5 Big IP SLB. OMS is up and running on all three nodes, however the OEM console shows three targets to be down on the first node as seen below.
1. node1:4889_Management_service
2. node1:4889_Management_service_CONSOLE
3. node1:4889_Management_service_PBS
The same three targets are reported up on node2 and node3.
I ran ./emctl status oms -details on all three nodes and the results are the same.
It looks like a false alarm to me. Any ideas?Hi Bill Wagman,
You can remove the agents and its monitored targets as below:
a. On the agent machine, stop the agent if running.
b. On the OMS machine, run the following:
1. Ensure emcli is configured:
<12c_OMS_HOME>/bin>./emcli setup
2. Login to emcli:
<12c_OMS_HOME>/bin>./emcli login -username=SYSMAN
3. Remove the problematic agents from console:
<12c_OMS_HOME>/bin>./emcli delete_target -name="<agent machine name:port>" -type="oracle_emd" -delete_monitored_targets -async
To delete a specific target, you can use the following command:
<12c_OMS_HOME>/bin>./emcli delete_target -name="<target_name>" -type="<target_type>"
Once the agent is removed from console, you can use the following note to deinstall agent software from agent machine:
Note 1368088.1 - How to De-install the Enterprise Manager Cloud Control 12c Agent
Note: The steps in the note 454081.1 is not applicable for 12c agents. It is not recommended to update repository objects manually.
Regards,
Anandu -
Not getting email once agent go down from OEM
Hi,
We configured notification rule for agent unavailability and Mail Server is configured properly as we are getting test email but if i do emctl stop dbconsole (as we are not using grid) we are not getting the email
please can some one suggest me what i missed
ThanksHi,
When you shutdown the DB console, the DB Control agent is also stopped. Thus, there is no EM process left to handle notification. If you want to send a notification when the (DB Control) database is down, then see the following MOS note:
How To Send Notification Via Mail For Database Down From DBConsole (Doc ID 1108372.1)
By the way, with EM Grid/Cloud Control you can set up out-of-band notification to send an email notification when an OMS (Oracle Management Service) or the Repository database is down
Regards,
- Loc -
Dispatcher down in Solution Manger 3.2
Hi all,
Dispatcher down in Solution Manager 3.2 on Windows 2003 and Oracle 9.2.
I have tried looking up on this forum for a solution, but without success.
Below are the dev_disp and dev_w0 files
dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 24 03:56:30 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 6100
***LOG Q00=> DpSapEnvInit, DPStart (00 6100) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 24 03:56:35 2009
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E80040, size: 3192688)
DpShMCreate: allocated sys_adm at 04E80040
DpShMCreate: allocated wp_adm at 04E81B58
DpShMCreate: allocated tm_adm_list at 04E84478
DpShMCreate: allocated tm_adm at 04E844A0
DpShMCreate: allocated wp_ca_adm at 0512B0E8
DpShMCreate: allocated appc_ca_adm at 05130EA8
DpShMCreate: allocated comm_adm_list at 05132DE8
DpShMCreate: allocated comm_adm at 05132E00
DpShMCreate: allocated vmc_adm_list at 05179AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05179AF8
DpShMCreate: allocated wall_adm at 05179B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2457 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( dlwsdv10) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 24 03:57:15 2009
*** ERROR => W0 (pid 5632) died [dpxxdisp.c 12187]
*** ERROR => W1 (pid 2688) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W2 (pid 6532) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W3 (pid 4980) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W4 (pid 6956) died [dpxxdisp.c 12187]
*** ERROR => W5 (pid 7812) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W6 (pid 1528) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W7 (pid 216) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5632 (SIGUSR2)
*** ERROR => DpWpKill(5632, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2688 (SIGUSR2)
*** ERROR => DpWpKill(2688, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-6532 (SIGUSR2)
*** ERROR => DpWpKill(6532, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-4980 (SIGUSR2)
*** ERROR => DpWpKill(4980, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-6956 (SIGUSR2)
*** ERROR => DpWpKill(6956, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-7812 (SIGUSR2)
*** ERROR => DpWpKill(7812, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-1528 (SIGUSR2)
*** ERROR => DpWpKill(1528, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-216 (SIGUSR2)
*** ERROR => DpWpKill(216, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 24 03:57:25 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 24 08:57:25 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5632 Ended no 1 0 0
1 DIA 2688 Ended no 1 0 0
2 UPD 6532 Ended no 1 0 0
3 ENQ 4980 Ended no 1 0 0
4 BTC 6956 Ended no 1 0 0
5 BTC 7812 Ended no 1 0 0
6 SPO 1528 Ended no 1 0 0
7 UP2 216 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 24 08:57:25 2009
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 3 | 2000 | 10 | 10 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 24 08:57:25 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Mar 24 08:57:25 2009
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 24 03:57:30 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3216) (SOFT_KILL)
Stop icman
killing process (2568) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3216 HANDLE:1504)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 24 03:57:31 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:1504)
[DpProcDied] Process lives (PID:2568 HANDLE:1496)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 24 03:57:32 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2568 HANDLE:1496)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'dlwsdv10'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1508
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 6100) [dpxxdisp.c 8495]
Good Bye .....
Appreciate any help,
Thanks,
vishnuHi all,
Below the dev_w0 file
dev_w0
trc file: "dev_w0", trc level: 1, release: "640"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, M
B
B Tue Mar 24 03:56:36 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\SM6\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\SM6\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\SM6\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 5632
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5632) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04E80040, size: 3192688)
M DpShMCreate: allocated sys_adm at 04E80040
M DpShMCreate: allocated wp_adm at 04E81B58
M DpShMCreate: allocated tm_adm_list at 04E84478
M DpShMCreate: allocated tm_adm at 04E844A0
M DpShMCreate: allocated wp_ca_adm at 0512B0E8
M DpShMCreate: allocated appc_ca_adm at 05130EA8
M DpShMCreate: allocated comm_adm_list at 05132DE8
M DpShMCreate: allocated comm_adm at 05132E00
M DpShMCreate: allocated vmc_adm_list at 05179AD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05179AF8
M DpShMCreate: allocated wall_adm at 05179B00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Mar 24 03:56:37 2009
M calling db_connect ...
C Got ORACLE_HOME=D:\oracle\sm6\924 from environment
C *** ERROR => OCI-call 'OCIInitialize' failed: rc = -1
[dboci.c 1848]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c 1742]
B ***LOG BY2=> sql error -1 performing CON [dbsh#2 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1269]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dlwsdv10_SM6_00 on host dlwsdv10 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Mar 24 03:56:37 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9589
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5632) [dpnttool.c 357]
Thanks,
vishnu. -
"Missing component" messages in the installation logs
I installed Oracle Application Server 10.1.3 on Windows, and I found some strange entries in the installActionsxxxxx.log files:
"# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1."...
This goes on for several pages. I still had the Oracle Application Server 10.1.2 installation packages on my computer, and I found out that several of the missing packages actually belong to 10.1.2, and several of them are earlier than 10.1.2.
My questions: is it a problem at all that these components are missing, or shall I ignore these log entries? If this is a problem, how to fix it?
Best Regards,
GaborHi Gabor,
You can ignor these log entries. (There is a bug logged. The installer team is looking for a good way to surpress these messages.)
Regards,
Mathias -
The Service Component Container is not running" eventhough they are running
Hi,
We are on 12.0.4 with hardware load balancer(cisco), and pcp has been configured between two Application nodes. The database is in the seperate node with OS Cluster.
I wanted to configure Workflow notification mailer. For that i have logedin through OAM workflow-->It is showing as
Nitification mailer -unavailable
Agent listener -- Down
Service component -- Down
Background Engine -- Down
Purge -- UP
Control queue cleanup - Down
I have Navigate to Service component screen,
There all the Automatic component are showing status as stopped with error, I clicked the "workflow agent listener service" of container all the services are up and "state" is showing as "activated" Node it is showing as "Primary node of PCP"
But when you click on any "stopped with error" service to start, It is throughing " The Service Component Container is not running" when i click on "view log" it is not showing any message seems like hanging.
Before starting the Notification mailer configuration i wanted to rectify the above issue.
Can you pl help us out in rectify the same.
Thanks and Regards
VasuCheck the log file from the server itself; it should be under ($APPLCSF/$APPLLOG/FNDCPGSC*.txt).
-
SAPMMC Dispatcher is Down also my WP Table shows Status as "ENDED"
HI all,
My Server is not getting Started ,SAPMMC Dispatcher is Down also my WP Table shows Status as "ENDED"
this is my dev_disp file
trc file: "dev_disp", trc level: 1, release: "620"
Sun Aug 15 11:15:15 2010
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 3660
***LOG Q00=> DpSapEnvInit, DPStart (00 3660) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
Sun Aug 15 11:15:20 2010
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 729 MB
<ES> 728 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( server) [dpxxdisp.c 8832]
Sun Aug 15 11:15:21 2010
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Sun Aug 15 11:16:01 2010
*** ERROR => W0 (pid 3992) died [dpxxdisp.c 11210]
*** ERROR => W1 (pid 4000) died [dpxxdisp.c 11210]
*** ERROR => W2 (pid 4008) died [dpxxdisp.c 11210]
*** ERROR => W3 (pid 4016) died [dpxxdisp.c 11210]
*** ERROR => W4 (pid 4024) died [dpxxdisp.c 11210]
*** ERROR => W5 (pid 4032) died [dpxxdisp.c 11210]
*** ERROR => W6 (pid 4040) died [dpxxdisp.c 11210]
*** ERROR => W7 (pid 4048) died [dpxxdisp.c 11210]
*** ERROR => W8 (pid 4056) died [dpxxdisp.c 11210]
*** ERROR => W9 (pid 4064) died [dpxxdisp.c 11210]
*** ERROR => W10 (pid 4072) died [dpxxdisp.c 11210]
*** ERROR => W11 (pid 4080) died [dpxxdisp.c 11210]
*** ERROR => W12 (pid 4088) died [dpxxdisp.c 11210]
*** ERROR => W13 (pid 2016) died [dpxxdisp.c 11210]
*** ERROR => W14 (pid 200) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
*** DP_FATAL_ERROR => DpEnvCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
*** ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
*** ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Sun Aug 15 11:16:07 2010
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3660) [dpxxdisp.c 7637]
Kindly help to solve this
Regards
M.H.D
Edited by: MhdZubair on Aug 15, 2010 8:20 AMHI Experts,
Pls Find my Dev_w0 file
trc file: "dev_w0", trc level: 1, release: "620"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, M
B
B Sun Aug 15 12:48:12 2010
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SER\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SER\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SER\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 31056
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 31056) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Sun Aug 15 12:48:16 2010
X EmInit: MmSetImplementation( 2 ).
X
X Sun Aug 15 12:48:17 2010
X <ES> client 0 initializing ....
X
X Sun Aug 15 12:48:18 2010
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sun Aug 15 12:48:19 2010
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora81 from environment
C
C Sun Aug 15 12:48:20 2010
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSER's password
C Connecting as /@SER on connection 0 ...
C Attaching to DB Server SER (con_hdl=0,svchp=07ADACE8,svrhp=07ADAAF4)
C
C Sun Aug 15 12:48:22 2010
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 3566]
C *** ERROR => CONNECT failed with sql error '12541'
[dboci.c 9536]
C Try to connect with default password
C Connecting as SAPSER/<pwd>@SER on connection 0 ...
C Attaching to DB Server SER (con_hdl=0,svchp=07ADACE8,svrhp=07ADA900)
C
C Sun Aug 15 12:48:24 2010
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 3566]
C *** ERROR => CONNECT failed with sql error '12541'
[dboci.c 9536]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server server_SER_00 on host server (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Aug 15 12:48:24 2010
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M
M Sun Aug 15 12:48:25 2010
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 31056) [dpnttool.c 345]
Regards
MHD -
How does OEM monitor the weblogic domain
Hi Guys,
I would like to know how does the OEM monitor the weblogic domain, i.e where does the em agent (in the target host) check to determine if the weblogic domain is up or down ?
- Does OEM fetch data regarding managed server from admin server ?
- Does managed servers show up in OEM if the admin server console is down but the managed server is up ? (i think it does show up, even if the admin is down but then how/where does it get to know the status)
- Is there any settings in the weblogic to be set ?
- Does the behavior of weblogic EM console and the OEM grid console are same ?
Basically want to understand, how and what all needs to check when the domain is showing down in OEM (when domain is up and running in weblogic console and the agent is perfectly fine)
Similarly for the Database how does it check the status "up or down"
- does it try to make a connection to the db ?
- if so where do we give the details for the db connection user and password ?
Please help me in understanding these.
Thanks and Regards,
HarishIf the targets are actually up and showing down in OEM console , so it means something wrong with the configuration .
Can you check the error message in the console , why it is down ? Or you can also check agent logs on the target server.
To monitor the weblogic , it uses username used during the configuration.
Please check the picture at below link :
Discovering Middleware Targets
Enter the WebLogic Administration Server user name and password.If you want to discover the target only for monitoring purposes, then it is sufficient to provide a user name that has a monitoring role. If you want to monitor the target and also perform start/stop operations, then ensure that you provide a user name that has either an operator role or an administrator role.Note: There is the potential of account locking issues if you enter the default WebLogic user name, and the account password is changed without updating the Enterprise Manager monitoring credentials for the Domain and Farm.
Thanks
Rajesh -
Hi ,
I am running ECC6 on AIX with DB2. My instance is getting shutdown authomatically.
Please find the dev_disp log . the database is still running
Signal 33 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x1136af380
=> Stack address = 0xfffffffffffea30
=> Stack low = 0xfffffffffffc140
=> Stack high = 0xffffffffffff510
=> Stack Trace:
poll() at 0x900000000407ae0
SiPoll() at 0x100005e88
select__10SISEL_POLLFiPUi() at 0x10002d8e8
selectInt__10NISEL_IMPLFiPUiPUc() at 0x10003b294
select__10NISEL_IMPLFiPUi() at 0x10003b074
NiSelSelect() at 0x10003915c
DpRqWaitFor() at 0x10179a0c0
DpLoopExec() at 0x1017a54fc
DpMain() at 0x1017ac138
nlsui_main() at 0x10195fd38
=> CPU Registers:
msr = 0xa00000000000d0b2 iar = 0x0900000000407ae0
ctr = 0xffffffff00000000 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000444000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffea30
r02 = 0xffffffffffffffff r03 = 0xffffffffffffffff
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x0000000112cbca80
r14 = 0x0000000102333050 r15 = 0x0ffffffffffff590
r16 = 0x0ffffffffffff5a8 r17 = 0x00000001104a45f0
r18 = 0x0ffffffffffffed0 r19 = 0x09fffffff0009cf8
r20 = 0xbadc0ffee0ddf00d r21 = 0xbadc0ffee0ddf00d
r22 = 0xbadc0ffee0ddf00d r23 = 0xbadc0ffee0ddf00d
r24 = 0x0000000000000000 r25 = 0x00000001100049a4
r26 = 0x0000000000004e20 r27 = 0x0000000000004e20
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a0067cb8 r31 = 0x0000000000000000
Mon Apr 28 03:00:31 2008
***LOG Q0E=> SigIGenAction, signal ( 33) http://sigux.c 916
DpHalt: shutdown server >sap2sd01_D20_00 < (normal)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=463162)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
DpModState: change server state from ACTIVE to SHUTDOWN
Mon Apr 28 03:00:43 2008
Stop work processes
Mon Apr 28 03:00:44 2008
SoftCancel request for T8 U9 M0 received from DISPATCHER
Mon Apr 28 03:00:47 2008
ERROR => DpWpKill(405582, SIGUSR2): kill failed http://dpxxtool.c 2620
ERROR => DpWpKill(1438014, SIGUSR2): kill failed http://dpxxtool.c 2620
ERROR => DpWpKill(1614152, SIGUSR2): kill failed http://dpxxtool.c 2620
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
waiting for termination of work processes ...
Mon Apr 28 03:00:49 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:51 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:52 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:53 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:54 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:55 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:56 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:57 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:58 2008
waiting for termination of work processes ...
Mon Apr 28 03:00:59 2008
waiting for termination of work processes ...
Mon Apr 28 03:01:00 2008
waiting for termination of work processes ...
Mon Apr 28 03:01:08 2008
wait for end of gateway
wait for end of icman
DpStartStopMsg: send stop message (myname is >sap2sd01_D20_00
<)
***LOG Q0I=> NiIWrite: writev (32: Broken pipe) http://nixxi.cpp 3803
ERROR => NiIWrite: SiSendV failed for hdl 3 / sock 12
(SI_ECONN_BROKEN/32; UD; ST; 10.130.129.14:3900) http://nixxi.cpp 3803
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) http://msxxi.c 2480
ERROR => MsISnd2: MsINiWrite (rc=NIECONN_BROKEN) http://msxxi.c 1438
MBUF state OFF
MBUF component DOWN
ERROR => DpStartStopMsg: MsSnd2Type failed (rc=-100) http://dpxxdisp.c 13477
ERROR => MsIReceive: not_attached http://msxxi.c 1201
ERROR => MsISnd2: not_attached http://msxxi.c 1321
ERROR => DpHalt: MsSendKeepalive failed (-3) http://dpxxdisp.c 10304
detach from message server
cleanup EM
cleanup event management
cleanup shared memory/semaphores
Mon Apr 28 03:01:09 2008
removing request queue
ERROR => DpRqIQRemove: ShmDelete http://dpxxqueu.c 431
***LOG Q05=> DpHalt, DPStop ( 1589794) http://dpxxdisp.c 10594
shutdown completed - server stopped ***
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x1136af380
=> Stack address = 0xfffffffffffea30
=> Stack low = 0xfffffffffffc140
=> Stack high = 0xffffffffffff510
=> Stack Trace:
poll() at 0x900000000407ae0
SiPoll() at 0x100005e88
select__10SISEL_POLLFiPUi() at 0x10002d8e8
selectInt__10NISEL_IMPLFiPUiPUc() at 0x10003b294
select__10NISEL_IMPLFiPUi() at 0x10003b074
NiSelSelect() at 0x10003915c
DpRqWaitFor() at 0x10179a0c0
DpLoopExec() at 0x1017a54fc
DpMain() at 0x1017ac138
nlsui_main() at 0x10195fd38
=> CPU Registers:
msr = 0xa00000000000d0b2 iar = 0x0900000000407ae0
ctr = 0xffffffff00000000 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000444000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffea30
r02 = 0xffffffffffffffff r03 = 0xffffffffffffffff
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x0000000112cbca80
r14 = 0x0000000102333050 r15 = 0x0ffffffffffff590
r16 = 0x0ffffffffffff5a8 r17 = 0x00000001104a45f0
r18 = 0x0ffffffffffffed0 r19 = 0x09fffffff0009cf8
r20 = 0xbadc0ffee0ddf00d r21 = 0xbadc0ffee0ddf00d
r22 = 0xbadc0ffee0ddf00d r23 = 0xbadc0ffee0ddf00d
r24 = 0x0000000000000000 r25 = 0x00000001100049a4
r26 = 0x0000000000004e20 r27 = 0x0000000000004e20
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a0067cb8 r31 = 0x0000000000000000
***LOG Q0E=> SigIGenAction, signal ( 6) http://sigux.c 916
DpHalt: shutdown server >sap2sd01_D20_00 < (normal)
ERROR => ShmProtect(SHM_PROFILE http://dpxxprf.c 486
ERROR => ShmProtect(SHM_PROFILE http://dpxxprf.c 494
Signal 11 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x1136af380
=> Stack address = 0xfffffffffffe180
=> Stack low = 0xfffffffffffb890
=> Stack high = 0xffffffffffff510
=> Stack Trace:
DpHalt() at 0x1017a8938
SigIGenAction() at 0x1000b15d4
Unknown at 0x44a0
!!! Invalid stack address encountered: 0x10001
!!! Stack corrupted.
=> CPU Registers:
msr = 0xa00000000000d0b2 iar = 0x00000001017a8938
ctr = 0x0900000000187800 lr = 0x00000001017a891c
xer = 0x0000000020000037 cr = 0x000000004242422a
r00 = 0x000000010000b0b8 r01 = 0x0fffffffffffe180
r02 = 0x00000001104da790 r03 = 0x0700000000120000
r04 = 0x0000000112cb4cf8 r05 = 0x0000000000000008
r06 = 0x0000000000000000 r07 = 0x0000000000000000
r08 = 0x0000000010181231 r09 = 0x0000000010181231
r10 = 0x0000000000000000 r11 = 0x0000000000000000
r12 = 0x00000001017a891c r13 = 0x0000000112cbca80
r14 = 0x0000000000000000 r15 = 0x00000001100127b0
r16 = 0x0000000000000002 r17 = 0x00000001104a5838
r18 = 0x0ffffffffffffed0 r19 = 0x09fffffff0009cf8
r20 = 0x0000000000000006 r21 = 0x0000000000000006
r22 = 0xf100070f02061000 r23 = 0x00000001104fd5d0
r24 = 0x00000001104fd4b0 r25 = 0x0000000000000006
r26 = 0x0000000112b2c5d8 r27 = 0x0000000110427a28
r28 = 0x0000000110001248 r29 = 0x0000000000000000
r30 = 0x0000000102343050 r31 = 0x0000000102333050
***LOG Q0E=> SigIGenAction, signal ( 6) http://sigux.c 916
DpHalt: shutdown server >sap2sd01_D20_00 < (normal)
ERROR => ShmProtect(SHM_PROFILE http://dpxxprf.c 486
ERROR => ShmProtect(SHM_PROFILE http://dpxxprf.c 494
Signal 11 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x1136af380
=> Stack address = 0xfffffffffffe180
=> Stack low = 0xfffffffffffb890
=> Stack high = 0xffffffffffff510
=> Stack Trace:
DpHalt() at 0x1017a8938
SigIGenAction() at 0x1000b15d4
Unknown at 0x44a0
!!! Invalid stack address encountered: 0x10001
!!! Stack corrupted.
=> CPU Registers:
msr = 0xa00000000000d0b2 iar = 0x00000001017a8938
ctr = 0x0900000000187800 lr = 0x00000001017a891c
xer = 0x0000000020000037 cr = 0x000000004242422a
r00 = 0x000000010000b0b8 r01 = 0x0fffffffffffe180
r02 = 0x00000001104da790 r03 = 0x0700000000120000
r04 = 0x0000000112cb4cf8 r05 = 0x0000000000000008
r06 = 0x0000000000000000 r07 = 0x0000000000000000
r08 = 0x0000000010181231 r09 = 0x0000000010181231
r10 = 0x0000000000000000 r11 = 0x0000000000000000
r12 = 0x00000001017a891c r13 = 0x0000000112cbca80
r14 = 0x0000000000000000 r15 = 0x00000001100127b0
r16 = 0x0000000000000002 r17 = 0x00000001104a5838
r18 = 0x0ffffffffffffed0 r19 = 0x09fffffff0009cf8
r20 = 0x0000000000000006 r21 = 0x0000000000000006
r22 = 0xf100070f02061000 r23 = 0x00000001104fd5d0
r24 = 0x00000001104fd4b0 r25 = 0x0000000000000006
r26 = 0x0000000112b2c5d8 r27 = 0x0000000110427a28
r28 = 0x0000000110001248 r29 = 0x0000000000000000
r30 = 0x0000000102343050 r31 = 0x0000000102333050
***LOG Q0E=> SigIGenAction, signal ( 11) http://sigux.c 916
DpHalt: shutdown server >sap2sd01_D20_00 < (normal)
ERROR => ShmProtect(SHM_PROFILE http://dpxxprf.c 486
ERROR => ShmProtect(SHM_PROFILE http://dpxxprf.c 494
Regards
AkifHi Juan Reyes ,
Please find attached the dev_w0 output
A Mon Apr 28 00:30:33 2008
A generated report BAPI_FIXEDASSET_OVRTAKE_CREATEFT with fingerprint
0D84EF9C1C79E96F5D617413ED1A4607| 110317
A
A Mon Apr 28 00:49:35 2008
A generated report SAPLJ1AL with fingerprint
4D51C121CE27E7F2EE5D3F93C16D586D| 257059
M
M Mon Apr 28 01:01:35 2008
M ***LOG US1=> Login, Wrong Password (SHN0704 ) http://sign.c 4387
A
A Mon Apr 28 01:04:43 2008
A Negative refCount for object x SAPDB__S .
A
A Mon Apr 28 01:18:34 2008
A Negative refCount for object v INDX .
M
M Mon Apr 28 01:29:17 2008
M *** ERROR => ThIDbgFreeInbuf: MpiFreeInbuf for mpi <101> failed (13) [thxxdbg.c
755]
M *** ERROR => ThIDbgFreeInbuf: MpiFreeInbuf for mpi <101> failed (13) [thxxdbg.c
755]
M
M Mon Apr 28 01:35:35 2008
M *** WARNING => PfSetGuiTime: gui time too large, discard
(gui=319578000/resptime=-2147483648)
A
A Mon Apr 28 01:51:30 2008
A Negative refCount for object x SAPDB__S .
A
A Mon Apr 28 02:32:01 2008
A generated report /1BCDWB/DBTVPA with fingerprint
B89FE2CCBB8EEEA3EEBFFC57E08B282A| 124116
Signal 33 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x11600e600
=> Stack address = 0xfffffffffffbbc0
=> Stack low = 0xfffffffffff92e0
=> Stack high = 0xffffffffffff510
=> Stack Trace:
Unknown at 0xe88c
get_segtab__Fv() at 0x1002ee734
ab_getdseg__FUiPCUs12GETDSEG_TYPEPUi() at 0x1002f10d0
ab_start() at 0x1001e4edc
ab_dialg() at 0x100616e2c
dy_isession() at 0x100f89208
dynpen00() at 0x100dc0b70
Thdynpen00() at 0x1000cf3fc
TskhLoop() at 0x1000d3cac
ThStart() at 0x1000e92a0
DpMain() at 0x10176c024
nlsui_main() at 0x1019200d8
=> CPU Registers:
msr = 0xa00000000000d0b2 iar = 0x000000000000e88c
ctr = 0x00000000000000b9 lr = 0x000000010026e6f8
xer = 0x0000000000000000 cr = 0x0000000044442284
r00 = 0x00000000000000f9 r01 = 0x0fffffffffffbbc0
r02 = 0x09001000a57a7170 r03 = 0x07000000bd01cff8
r04 = 0x0000000000000018 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0000000000000000
r08 = 0x0000000000000000 r09 = 0x0000000000000000
r10 = 0x07000000bd01c7f8 r11 = 0x07000000bd01e738
r12 = 0x0000000000000000 r13 = 0x0000000112c0b100
r14 = 0x0000000110015470 r15 = 0x0ffffffffffff590
r16 = 0x0000000110016c7c r17 = 0x00000001100104e8
r18 = 0x0000000000000003 r19 = 0x0000000000000003
r20 = 0x0000000000000003 r21 = 0x0000000000000000
r22 = 0x0000000000000000 r23 = 0x0000000000000003
r24 = 0x0000000000000007 r25 = 0x0000000101a04088
r26 = 0x00000001100231f4 r27 = 0x07000000bd01c7f8
r28 = 0x0000000000000000 r29 = 0x0000000000000000
r30 = 0x0000000000001f40 r31 = 0x0000000000000000
M
M Mon Apr 28 03:00:35 2008
M ***LOG Q0E=> SigIGenAction, signal ( 33) http://sigux.c 911
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 67108865
M tid = 33
M mode = 0
M len = 1584
M rq_id = 6058
M rq_source = 2
M last_tid = 33
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 1
M ext_checked_resource(RFC) = 1
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M Modeinfo for User T33/M0
M
M tm state = 2
M uid = 882
M term type = 0x20
M display = 0x0
M cpic_no = 1
M cpic_idx = 3
M usr = >SAPSYS <
M terminal = >10.130.129.14 <
M client = >000<
M conversation_ID = >04578840<
M appc_tm_conv_idx = 3
M session_id = >48140BB19B034181000000000A82810E<
M ext_session_id = >48140BB19B034181000000000A82810E<
M imode = 0
M mode state = 0x22
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCAPIN
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 38
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x7000000319fb868
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = V-1
M
M Adresse Offset Data from APPC-CA-AREA
M
M 0x70000002095dba0 000000 06030200 ffff0000 00000100 00000000 |................|
M 0x70000002095dbb0 000016 43ffffff ff000000 00000000 00000704 |C...............|
M 0x70000002095dbc0 000032 00000000 00000000 30343537 38383430 |........04578840|
M 0x70000002095dbd0 000048 000005e0 00000002 000005e0 00000001 |................|
M 0x70000002095dbe0 000064 00000000 02343130 32020000 00030003 |.....4102.......|
M 0x70000002095dbf0 000080 d9c6c3f0 f0f0f0f0 f0f0f0f0 01010008 |................|
M 0x70000002095dc00 000096 03020105 04010002 01010103 00040000 |................|
M 0x70000002095dc10 000112 030b0103 0106000b 04010002 01030200 |................|
M 0x70000002095dc20 000128 00002301 06012700 9d312d38 2d322d39 |..#...'..1-8-2-9|
M 0x70000002095dc30 000144 2d332d30 2d342d32 2d352d31 302e3133 |-3-0-4-2-5-10.13|
M 0x70000002095dc40 000160 302e3132 392e3134 2d362d73 61706777 |0.129.14-6-sapgw|
M 0x70000002095dc50 000176 30322d37 2d302e30 2e302e30 2d31372d |02-7-0.0.0.0-17-|
M 0x70000002095dc60 000192 31302e31 33302e31 32392e31 342d3138 |10.130.129.14-18|
M 0x70000002095dc70 000208 2d302e30 2e302e30 2d392d45 2d31302d |-0.0.0.0-9-E-10-|
M 0x70000002095dc80 000224 302d3131 2d323535 2d31322d 302d3133 |0-11-255-12-0-13|
M 0x70000002095dc90 000240 2d302d31 342d342d 31362d53 32302d31 |-0-14-4-16-S20-1|
M 0x70000002095dca0 000256 352d3438 31353738 38413736 33313030 |5-4815788A763100|
M 0x70000002095dcb0 000272 35383030 30303030 30303041 38323831 |58000000000A8281|
M 0x70000002095dcc0 000288 30452d38 2d000127 0007001e 00310030 |0E-8-..'.....1.0|
M 0x70000002095dcd0 000304 002e0031 00330030 002e0031 00320039 |...1.3.0...1.2.9|
M 0x70000002095dce0 000320 002e0031 00340020 00200007 0018005a |...1.4. . .....Z|
M 0x70000002095dcf0 000336 00310030 002e0031 00330030 002e0031 |.1.0...1.3.0...1|
M 0x70000002095dd00 000352 00320039 002e0031 00340020 00200020 |.2.9...1.4. . . |
M 0x70000002095dd10 000368 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd20 000384 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd30 000400 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd40 000416 00200020 00200020 00200018 00110002 |. . . . . ......|
M 0x70000002095dd50 000432 00330011 00120008 00370030 00300020 |.3.......7.0.0. |
M 0x70000002095dd60 000448 00120013 00080037 00300030 00200013 |.......7.0.0. ..|
M 0x70000002095dd70 000464 00080040 00730061 00700032 00730064 |[email protected]|
M 0x70000002095dd80 000480 00300031 005f0053 00320030 005f0030 |.0.1..S.2.0..0|
M 0x70000002095dd90 000496 00320020 00200020 00200020 00200020 |.2. . . . . . . |
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap2sd01_S20_02 on host sap2sd01 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Apr 28 03:00:35 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 20
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T33/U882/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level 0, don't call ab_rollout
M ThRollOut: full roll out of U882 M0 I0 (Level 7) ok
C Received cancel request for current DB operation
C Not in a DB Operation -> DBSL_ERR_ACCESS
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
M SigIRegisterHook: registered hook >ab_catch_dumperror< for signal 11
M SigIRegisterHook: registered hook >ab_catch_dumperror< for signal 10
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M Mon Apr 28 03:00:44 2008
M SigIRegisterRoutine: handler for signal 31 installed (DpTrcOnOff)
M ThWpSoftCancelHandler: set clean state of T33/M0 to DP_SOFTCANCEL
M ThWpSoftCancelHandler: reset user after db break
C Received cancel request for current DB operation
C In the DB interface but outside a DB call -> DBSL_ERR_OK
M program canceled
M reason = soft cancel
M user = SAPSYS
M client = 000
M terminal = 10.130.129.14
M report =
C Mon Apr 28 03:00:47 2008
C Execution cancelled
M ThHdlSqlBreak: hdl db sql break
M program canceled
M reason = soft cancel
M user = SAPSYS
M client = 000
M terminal = 10.130.129.14
M report =
M ThHdlSqlBreak: set clean state of T33/M0 to DP_DEFAULT_CLEANING
M ThIRollBack
M ThIRollBack: call db_rollback
M ThCheckComOrRb (event=0, full_commit=1)
M ThCallHooks: no hooks during signal handling
M ThCheckComOrRb (event=2, full_commit=1)
M ThCallHooks: no hooks during signal handling
M ThICommit3: full commit, set time, free resources, redispatch
M ThICommit3: commit and free resources
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: no hooks during signal handling
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: no hooks during signal handling
M ThrClearMemory o.k.
M ThCallHooks: no hooks during signal handling
M ThAlarm: set alarm to 600 sec
M ThICommit3 o.k.
M ThCleanPrevUser: clean U882 T33 M0 I0 V-1 from previous wp
M ThCleanPrevUser: saved MODE_REC = 20
M PfStatDisconnect: disconnect statistics
M ThCleanPrevUser: set clean state of T33/M0 to DP_DEFAULT_CLEANING
M ThSoftCancel: set clean state of T33/M0 to DP_DEFAULT_CLEANING
M ThSoftCancel: soft cancel of T33/M0
M set DbgError (nil)
M ThSoftCancel: set rq_id_last_softcancel to 6058
M ThCheckMemoryState (0, 1, 0)
M ThRollIn: roll in T33/U882/M0/I0 (level=7, abap_level=2, attach_em=1)
M ThRollIn: no roll in neccessary
M ThRollIn: roll in abap all
A *** ERROR => ab_RollInStor: SPA and ab_gl out of sync - Roll Area inconsistent
(U882 M0 I0) http://abinit.c 1721
M ***LOG R0C=> ThRollIn, ab_rollin ( 00882000-02) http://thxxmem.c 1333
M in_ThErrHandle: 2
M *** ERROR => ThRollIn: bad abap rollin (step 4, th_errno 7, action 1, level 2)
http://thxxhead.c 10156
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c
10177]
M
C-STACK
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x11600e600
=> Stack address = 0xfffffffffffbbc0
=> Stack low = 0xfffffffffff3be0
=> Stack high = 0xffffffffffff510
=> Stack Trace:
Unknown at 0xe88c
get_segtab__Fv() at 0x1002ee734
ab_getdseg__FUiPCUs12GETDSEG_TYPEPUi() at 0x1002f10d0
ab_start() at 0x1001e4edc
ab_dialg() at 0x100616e2c
dy_isession() at 0x100f89208
dynpen00() at 0x100dc0b70
Thdynpen00() at 0x1000cf3fc
TskhLoop() at 0x1000d3cac
ThStart() at 0x1000e92a0
DpMain() at 0x10176c024
nlsui_main() at 0x1019200d8
=> CPU Registers:
msr = 0xa00000000000d0b2 iar = 0x000000000000e88c
ctr = 0x00000000000000b9 lr = 0x000000010026e6f8
xer = 0x0000000000000000 cr = 0x0000000044442284
r00 = 0x00000000000000f9 r01 = 0x0fffffffffffbbc0
r02 = 0x09001000a57a7170 r03 = 0x07000000bd01cff8
r04 = 0x0000000000000018 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0000000000000000
r08 = 0x0000000000000000 r09 = 0x0000000000000000
r10 = 0x07000000bd01c7f8 r11 = 0x07000000bd01e738
r12 = 0x0000000000000000 r13 = 0x0000000112c0b100
r14 = 0x0000000110015470 r15 = 0x0ffffffffffff590
r16 = 0x0000000110016c7c r17 = 0x00000001100104e8
r18 = 0x0000000000000003 r19 = 0x0000000000000003
r20 = 0x0000000000000003 r21 = 0x0000000000000000
r22 = 0x0000000000000000 r23 = 0x0000000000000003
r24 = 0x0000000000000007 r25 = 0x0000000101a04088
r26 = 0x00000001100231f4 r27 = 0x07000000bd01c7f8
r28 = 0x0000000000000000 r29 = 0x0000000000000000
r30 = 0x0000000000001f40 r31 = 0x0000000000000000
M
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 67108865
M tid = 33
M mode = 0
M len = 1584
M rq_id = 6058
M rq_source = 2
M last_tid = 33
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 1
M ext_checked_resource(RFC) = 1
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M Modeinfo for User T33/M0
M
M tm state = 2
M uid = 882
M term type = 0x20
M display = 0x0
M cpic_no = 1
M cpic_idx = 3
M usr = >SAPSYS <
M terminal = >10.130.129.14 <
M client = >000<
M conversation_ID = >04578840<
M appc_tm_conv_idx = 3
M session_id = >48140BB19B034181000000000A82810E<
M ext_session_id = >48140BB19B034181000000000A82810E<
M imode = 0
M mode state = 0x22
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCAPIN
M lastAction = TH_IACT_NO_ACTION
M th_errno = 7
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 38
M roll state = 4
M abap state = 5
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x7000000319fb868
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = V-1
M
M Adresse Offset Data from APPC-CA-AREA
M
M 0x70000002095dba0 000000 06030200 ffff0000 00000100 00000000 |................|
M 0x70000002095dbb0 000016 43ffffff ff000000 00000000 00000704 |C...............|
M 0x70000002095dbc0 000032 00000000 00000000 30343537 38383430 |........04578840|
M 0x70000002095dbd0 000048 000005e0 00000002 000005e0 00000001 |................|
M 0x70000002095dbe0 000064 00000000 02343130 32020000 00030003 |.....4102.......|
M 0x70000002095dbf0 000080 d9c6c3f0 f0f0f0f0 f0f0f0f0 01010008 |................|
M 0x70000002095dc00 000096 03020105 04010002 01010103 00040000 |................|
M 0x70000002095dc10 000112 030b0103 0106000b 04010002 01030200 |................|
M 0x70000002095dc20 000128 00002301 06012700 9d312d38 2d322d39 |..#...'..1-8-2-9|
M 0x70000002095dc30 000144 2d332d30 2d342d32 2d352d31 302e3133 |-3-0-4-2-5-10.13|
M 0x70000002095dc40 000160 302e3132 392e3134 2d362d73 61706777 |0.129.14-6-sapgw|
M 0x70000002095dc50 000176 30322d37 2d302e30 2e302e30 2d31372d |02-7-0.0.0.0-17-|
M 0x70000002095dc60 000192 31302e31 33302e31 32392e31 342d3138 |10.130.129.14-18|
M 0x70000002095dc70 000208 2d302e30 2e302e30 2d392d45 2d31302d |-0.0.0.0-9-E-10-|
M 0x70000002095dc80 000224 302d3131 2d323535 2d31322d 302d3133 |0-11-255-12-0-13|
M 0x70000002095dc90 000240 2d302d31 342d342d 31362d53 32302d31 |-0-14-4-16-S20-1|
M 0x70000002095dca0 000256 352d3438 31353738 38413736 33313030 |5-4815788A763100|
M 0x70000002095dcb0 000272 35383030 30303030 30303041 38323831 |58000000000A8281|
M 0x70000002095dcc0 000288 30452d38 2d000127 0007001e 00310030 |0E-8-..'.....1.0|
M 0x70000002095dcd0 000304 002e0031 00330030 002e0031 00320039 |...1.3.0...1.2.9|
M 0x70000002095dce0 000320 002e0031 00340020 00200007 0018005a |...1.4. . .....Z|
M 0x70000002095dcf0 000336 00310030 002e0031 00330030 002e0031 |.1.0...1.3.0...1|
M 0x70000002095dd00 000352 00320039 002e0031 00340020 00200020 |.2.9...1.4. . . |
M 0x70000002095dd10 000368 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd20 000384 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd30 000400 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd40 000416 00200020 00200020 00200018 00110002 |. . . . . ......|
M 0x70000002095dd50 000432 00330011 00120008 00370030 00300020 |.3.......7.0.0. |
M 0x70000002095dd60 000448 00120013 00080037 00300030 00200013 |.......7.0.0. ..|
M 0x70000002095dd70 000464 00080040 00730061 00700032 00730064 |[email protected]|
M 0x70000002095dd80 000480 00300031 005f0053 00320030 005f0030 |.0.1..S.2.0..0|
M 0x70000002095dd90 000496 00320020 00200020 00200020 00200020 |.2. . . . . . . |
M
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
C Received cancel request for current DB operation
C Not in a DB Operation -> DBSL_ERR_ACCESS
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (38), detach T33/M0
http://thxxhead.c 10636
M
M Modeinfo for User T33/M0
M
M tm state = 2
M uid = 882
M term type = 0x20
M display = 0x0
M cpic_no = 1
M cpic_idx = 3
M usr = >SAPSYS <
M terminal = >10.130.129.14 <
M client = >000<
M conversation_ID = >04578840<
M appc_tm_conv_idx = 3
M session_id = >48140BB19B034181000000000A82810E<
M ext_session_id = >48140BB19B034181000000000A82810E<
M imode = 0
M mode state = 0x22
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCAPIN
M lastAction = TH_IACT_NO_ACTION
M th_errno = 7
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 38
M roll state = 4
M abap state = 5
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x7000000319fb868
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = V-1
M
M Adresse Offset Data from APPC-CA-AREA
M
M 0x70000002095dba0 000000 06030200 ffff0000 00000100 00000000 |................|
M 0x70000002095dbb0 000016 43ffffff ff000000 00000000 00000704 |C...............|
M 0x70000002095dbc0 000032 00000000 00000000 30343537 38383430 |........04578840|
M 0x70000002095dbd0 000048 000005e0 00000002 000005e0 00000001 |................|
M 0x70000002095dbe0 000064 00000000 02343130 32020000 00030003 |.....4102.......|
M 0x70000002095dbf0 000080 d9c6c3f0 f0f0f0f0 f0f0f0f0 01010008 |................|
M 0x70000002095dc00 000096 03020105 04010002 01010103 00040000 |................|
M 0x70000002095dc10 000112 030b0103 0106000b 04010002 01030200 |................|
M 0x70000002095dc20 000128 00002301 06012700 9d312d38 2d322d39 |..#...'..1-8-2-9|
M 0x70000002095dc30 000144 2d332d30 2d342d32 2d352d31 302e3133 |-3-0-4-2-5-10.13|
M 0x70000002095dc40 000160 302e3132 392e3134 2d362d73 61706777 |0.129.14-6-sapgw|
M 0x70000002095dc50 000176 30322d37 2d302e30 2e302e30 2d31372d |02-7-0.0.0.0-17-|
M 0x70000002095dc60 000192 31302e31 33302e31 32392e31 342d3138 |10.130.129.14-18|
M 0x70000002095dc70 000208 2d302e30 2e302e30 2d392d45 2d31302d |-0.0.0.0-9-E-10-|
M 0x70000002095dc80 000224 302d3131 2d323535 2d31322d 302d3133 |0-11-255-12-0-13|
M 0x70000002095dc90 000240 2d302d31 342d342d 31362d53 32302d31 |-0-14-4-16-S20-1|
M 0x70000002095dca0 000256 352d3438 31353738 38413736 33313030 |5-4815788A763100|
M 0x70000002095dcb0 000272 35383030 30303030 30303041 38323831 |58000000000A8281|
M 0x70000002095dcc0 000288 30452d38 2d000127 0007001e 00310030 |0E-8-..'.....1.0|
M 0x70000002095dcd0 000304 002e0031 00330030 002e0031 00320039 |...1.3.0...1.2.9|
M 0x70000002095dce0 000320 002e0031 00340020 00200007 0018005a |...1.4. . .....Z|
M 0x70000002095dcf0 000336 00310030 002e0031 00330030 002e0031 |.1.0...1.3.0...1|
M 0x70000002095dd00 000352 00320039 002e0031 00340020 00200020 |.2.9...1.4. . . |
M 0x70000002095dd10 000368 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd20 000384 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd30 000400 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd40 000416 00200020 00200020 00200018 00110002 |. . . . . ......|
M 0x70000002095dd50 000432 00330011 00120008 00370030 00300020 |.3.......7.0.0. |
M 0x70000002095dd60 000448 00120013 00080037 00300030 00200013 |.......7.0.0. ..|
M 0x70000002095dd70 000464 00080040 00730061 00700032 00730064 |[email protected]|
M Adresse Offset Data from APPC-CA-AREA
M
M 0x70000002095dba0 000000 06030200 ffff0000 00000100 00000000 |................|
M 0x70000002095dbb0 000016 43ffffff ff000000 00000000 00000704 |C...............|
M 0x70000002095dbc0 000032 00000000 00000000 30343537 38383430 |........04578840|
M 0x70000002095dbd0 000048 000005e0 00000002 000005e0 00000001 |................|
M 0x70000002095dbe0 000064 00000000 02343130 32020000 00030003 |.....4102.......|
M 0x70000002095dbf0 000080 d9c6c3f0 f0f0f0f0 f0f0f0f0 01010008 |................|
M 0x70000002095dc00 000096 03020105 04010002 01010103 00040000 |................|
M 0x70000002095dc10 000112 030b0103 0106000b 04010002 01030200 |................|
M 0x70000002095dc20 000128 00002301 06012700 9d312d38 2d322d39 |..#...'..1-8-2-9|
M 0x70000002095dc30 000144 2d332d30 2d342d32 2d352d31 302e3133 |-3-0-4-2-5-10.13|
M 0x70000002095dc40 000160 302e3132 392e3134 2d362d73 61706777 |0.129.14-6-sapgw|
M 0x70000002095dc50 000176 30322d37 2d302e30 2e302e30 2d31372d |02-7-0.0.0.0-17-|
M 0x70000002095dc60 000192 31302e31 33302e31 32392e31 342d3138 |10.130.129.14-18|
M 0x70000002095dc70 000208 2d302e30 2e302e30 2d392d45 2d31302d |-0.0.0.0-9-E-10-|
M 0x70000002095dc80 000224 302d3131 2d323535 2d31322d 302d3133 |0-11-255-12-0-13|
M 0x70000002095dc90 000240 2d302d31 342d342d 31362d53 32302d31 |-0-14-4-16-S20-1|
M 0x70000002095dca0 000256 352d3438 31353738 38413736 33313030 |5-4815788A763100|
M 0x70000002095dcb0 000272 35383030 30303030 30303041 38323831 |58000000000A8281|
M 0x70000002095dcc0 000288 30452d38 2d000127 0007001e 00310030 |0E-8-..'.....1.0|
M 0x70000002095dcd0 000304 002e0031 00330030 002e0031 00320039 |...1.3.0...1.2.9|
M 0x70000002095dce0 000320 002e0031 00340020 00200007 0018005a |...1.4. . .....Z|
M 0x70000002095dcf0 000336 00310030 002e0031 00330030 002e0031 |.1.0...1.3.0...1|
M 0x70000002095dd00 000352 00320039 002e0031 00340020 00200020 |.2.9...1.4. . . |
M 0x70000002095dd10 000368 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd20 000384 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd30 000400 00200020 00200020 00200020 00200020 |. . . . . . . . |
M 0x70000002095dd40 000416 00200020 00200020 00200018 00110002 |. . . . . ......|
M 0x70000002095dd50 000432 00330011 00120008 00370030 00300020 |.3.......7.0.0. |
M 0x70000002095dd60 000448 00120013 00080037 00300030 00200013 |.......7.0.0. ..|
M 0x70000002095dd70 000464 00080040 00730061 00700032 00730064 |[email protected]|
M 0x70000002095dd80 000480 00300031 005f0053 00320030 005f0030 |.0.1..S.2.0..0|
M 0x70000002095dd90 000496 00320020 00200020 00200020 00200020 |.2. . . . . . . |
M
M NiIWrite: hdl 1 sent data (wrt=72,pac=1,MESG_IO)
M NiICloseHandle: shutdown and close hdl 1 / sock 12
M call ThrShutDown ...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date
Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080424
073145 sap2sd01
C Mon Apr 28 03:00:48 2008
C disconnected from 'S20', con_hdl=0
B Disconnected from connection 0
B statistics db_con_commit (com_total=85283, com_tx=23316)
B statistics db_con_rollback (roll_total=666, roll_tx=9)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1577216) http://dpuxtool.c 260
M Good Bye .....
Regards
Akif -
Hello
Our Productive server suddenly stopped functionning.
In Management Console the Disp+Work was jellow in status"running but Dialog Queue standstil"
What should I look at?
Thank you very much in advanceIn the meantime I restarted the server. They claims the systems get "frozen". However in st03n I have good response time (todays average for dialog:348ms background:3854 ms)
I am sending today's part of dev_disp.old(there were a lot of *** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ):
Fri Dec 29 10:20:23 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:20:29 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:20:33 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:20:36 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:20:51 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:21:46 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:37:17 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:37:18 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:50:21 2006
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
WARNING => DpEnvCheck: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 10:51:21 2006
SoftCancel request for T8 U2337 M2 received from REMOTE_TERMINAL
Fri Dec 29 12:44:01 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 12:44:13 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 12:44:14 2006
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Dec 29 13:02:06 2006
SoftCancel request for T18 U2532 M1 received from REMOTE_TERMINAL
Fri Dec 29 13:02:09 2006
SoftCancel request for T8 U2337 M3 received from REMOTE_TERMINAL
Fri Dec 29 13:02:45 2006
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Fri Dec 29 13:03:08 2006
SoftCancel request for T10 U2423 M4 received from REMOTE_TERMINAL
Fri Dec 29 13:06:36 2006
SoftCancel request for T8 U2337 M3 received from REMOTE_TERMINAL
Fri Dec 29 13:07:05 2006
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Fri Dec 29 13:11:07 2006
DpSigInt: caught signal 2
Shutdown server ...
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes...
Fri Dec 29 13:11:08 2006
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Fri Dec 29 13:11:09 2006
waiting for termination of work processes
Fri Dec 29 13:11:10 2006
waiting for termination of work processes
Fri Dec 29 13:11:11 2006
waiting for termination of work processes
Fri Dec 29 13:11:12 2006
waiting for termination of work processes
Fri Dec 29 13:11:13 2006
waiting for termination of work processes
Fri Dec 29 13:11:14 2006
waiting for termination of work processes
Fri Dec 29 13:11:15 2006
waiting for termination of work processes
Fri Dec 29 13:11:16 2006
waiting for termination of work processes
Fri Dec 29 13:11:17 2006
waiting for termination of work processes
Fri Dec 29 13:11:18 2006
waiting for termination of work processes
Fri Dec 29 13:11:19 2006
waiting for termination of work processes
Fri Dec 29 13:11:20 2006
waiting for termination of work processes
Fri Dec 29 13:11:21 2006
waiting for termination of icman
Fri Dec 29 13:11:22 2006
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10045]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 4364) [dpxxdisp.c 8547] -
HTTP Server Doesn't Start after install
I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
The *./opmnctl status* reports:
Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
---------------------------------+--------------------+---------+---------
ias-component | process-type | pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group | OC4J:home | 18970 | Alive
ASG | ASG | N/A | DownI found the following in the installActions log:
Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.dcm 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.logloader 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
What am I missing? Is there a package I need to install before installing the App Server?
Edited by: BCurtis on Sep 24, 2010 3:22 PM
Edited by: BCurtis on Sep 24, 2010 3:25 PMI now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration? -
We need to disable Otrace utility as part of our security requirements. Can one of you provide me the document to perform this?
Oracle 11g
Windows 2008
Thanks.How and why to disable ORACLE Trace
One of the components of ORACLE Enterprise Manager (OEM) can have a significant negative impact on the performance of your database connections. Typically, the problem symptom is a steadily increasing login time for users. Depending on your configuration, you may see this problem for server-based connections, for client-based connections, or both. To resolve the problem, you must disable an underlying component of the OEM Performance Pack.
By default, OEM does not come with the Performance Pack toolset installed. The Performance Pack is a set of add-on utilities designed to help with the tuning and performance management aspects of the database. The Performance Pack includes tools such as Top Sessions and ORACLE Expert.
One of the Performance Pack tools, ORACLE Trace, may impact your performance even if you do not use it. ORACLE Trace evaluates database-level trace information to identify potential performance problems. To generate the information it needs in order to perform this evaluation, ORACLE Trace collects trace information about the database activity.
You should not run ORACLE Trace constantly; however, it is enabled by default in many installations in ORACLE7.3 and above. As a result, your database may be constantly generating trace data that you may never use. Because you are generating and maintaining this trace information, your database may exhibit performance-related problems, such as poor query response time, aborted sessions, and database connection attempts that take a very long time. This problem is most prevalent in the UNIX implementations of ORACLE Trace.
To determine if ORACLE Trace is collecting data on your server, check for the existence of the process.dat and regid.dat files in the /otrace/admin subdirectory of your ORACLE software home directory. An example of this check, as performed on a UNIX server, is shown in the following listing. The cd command changes the directory, and the ls command lists the files that match the *.dat filename format.
cd $ORACLE_HOME/otrace/admin
ls -alt *.dat-rw-rw-rw- 1 oracle dba 11948576 Sep 16 10:40 process.dat
-rw-rw-rw- 1 oracle dba 1023292 Sep 16 10:40 regid.dat
The listing shows that the process.dat file has grown to over 11MB. In general, the performance of database connections is affected when the process.dat file exceeds 5MB in size. Before beginning to resolve the problem, you should first shut down the databases on the server. To resolve the problem, delete the process.data and regid.data files and run the otrccref command (which re-initializes the ORACLE Trace files). These actions are shown in the following example:
cd $ORACLE_HOME/otrace/admin
rm -f process.dat regid.dat
otrccrefIn the listing, the UNIX rm command is used to delete the trace files created by ORACLE Trace. To prevent new entries from being written to the trace files, you should set the EPC_DISABLED environment variable to TRUE in the profile (login) file for the user account that owns the ORACLE software (usually named oracle). For example, the following Bourne shell command set this variable:
EPC_DISABLED=TRUE; export EPC_DISABLED
You must also disable ORACLE Trace log generation by modifying the listener.ora file. Each listener.ora file includes a section that lists the instances to listen for and the ORACLE software home directory for the instances. A sample listener.ora section for the ‘loc’ instance is shown in the following listing:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = loc)
(ORACLE_HOME = /orasw/app/oracle/product/8.0.3.1)
To make sure SQL*Net V2 and Net8 connections to your database do not enable ORACLE Trace, you must add a clause to the listener.ora file. The new clause, which sets a value for the ENVS variable, should follow the ORACLE_HOME variable setting, as shown in the following listing:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = loc)
(ORACLE_HOME = /orasw/app/oracle/product/8.0.3.1)
(ENVS='EPC_DISABLED=TRUE')
For all of the environment variables to take effect, you should log in to the server again, shut down and restart the listener process, and restart the databases.
When making these changes, you should be sure to make the changes in both the user profile file and the listener.ora file. If you change only the user profile, then connections from the server will perform adequately while the performance of connections from clients using SQL*Net gradually deteriorate. If you need to use ORACLE Trace, use it only during specific periods when you are tuning a known set of database activities.
Edited by: Dinesh Maroo on Jul 28, 2011 11:31 AM
Maybe you are looking for
-
Can I use local SLD for each system?
Hi! Our company is a big SAP outsourcing with hundreds of SAP systems. We plan to use the local SLD for each new system (>640). Is this a possible and good solution? Point guaranteed.
-
Problems getting just the file name using an upload component
Hi everyone, I'm using an upload component on my page and I need to get just the name of the image/file in order to store it in a database, I used the code of the tutorial and It works fine on mozilla but the problem comes when I use Internet Explore
-
Interface development - with BOL
Hi, I have a general question. I would like to implement a generic function module which should work as interface to store a order in CRM 7.0. In this function modul i will use the BOL to handle the data create and update. The BOL delivers data struc
-
Hello sir i bay asmart watch 2 with my phone sony Z2 and its great but i have problem with arabic langoug the phon book when i try to search aname its ok but when any notification from any program like facebook or whatsapp or sms or any think its com
-
How quickly does the basic 1.4GHz/4GB/500GB iMacMini load Sling Media New Watch application and connect to one's account? Is this iMac fast enough to stream a video stream of approx. 2MB bandwidth without buffering (assuming an adequate internet con