MRP and Inventory psoting list

Hello
2 questions
when we run MRP and ask to take into account the open purchase order we have recommendation without open purchase quantity taken into account and all purchase orders open are made in 2009
Could it be because of the new year ?
Second question in item screen we right click and have for each item the option to see posting list but since 1st of January teh posting list is without stock movements and does not show 2009 movements
Do you know if we can somehow define the dates where the posting list is shown ? They want to see obviously stocks movements from 2009
Thank you for your help in advance

If your financial year ends on the 31st of December then the short cut from Item Master Data will not show the previous financial years transactions. This is standard B1 functionality and you cannot define the dates.
You can run the full Stock Postings list from the Reports menu and this will give you all transactions.
In your MRP you must make sure that the From Date includes all the purchase orders in the previous year. For example if your oldest purchase order is 01.10.09 then your start date in horizon for MRP should be 01.10.09. This will put all your purchase orders in the Past Due section but will include them in all calculations for ordering stock.
Regards,
Michelle

Similar Messages

MRP and Inventory Reservations MD04

I have been digging on inventory reservations and have found nothing to indicate the the MRP element OrdRes is "decremented" by partial issues of inventory on process orders PI01 type. Were seeing the required quantity stay the same until final issue flag is set (or entire reserved qty issued) and final confirmation/clear reservations set on COR6N. Is this standard SAP functionality or is there configuration I've missed somewhere?
Tim

Tim : how are you carrying out the consumption ?
- Backflush with confirmation ?
- Manual (MB1A) to reservation ?
- Manual (MB1A) to the order , regardless od reservation ?
Thanks---
Were are using primarily MB1A to the order regardless of reservation. We do have some backflushing going on and trying to build in more. Should we be issuing "to resevation" within order? what about back flushing?
Thanks,
Tim

List of Standard Reports in Purchasing and Inventory

Pls send me list of Standard reports for Purchasing and inventory.
Thanks-Manju

This is duplicate thread (NO POINTS required)
Hello Manjula,
Go to transaction code SAP1, this will show all the reports functional area-wise.
For purchasing reports : Go to Material management --> Purchasing
For Inventory management reports : Go to Material management --> Inventory management
Hope this helps
Regards
Arif Mansuri

Discrepancies in MRP Available Inventory between SC and BW

We're seeing a discrepancy in a BW report and the data shown in md05/md05. There's a difference in the MRP Available Inventory. What are other possible sources of this difference? We know Safety Stock, SafeReq and MatRes, but for this particular issue, that doesn't quite solve it.
The difference appears in a future week and that difference is carried on to the weeks after that week.

hi,
check 'transfering data with db connect' doc ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
and oss 339092, 518241
hope this helps.
Procedure
Before you can open a database connection, you have to make all connection data necessary for identification of the source database and for authentication for this database, known to the ABAP runtime environment. For this you need to specify the connection data for each database connection, which also needs to be created to the SAP default connection.
1.     To do this, choose in the Administrator Workbench source system tree ¡V Modeling Source Systems (Root Nodes) _nContext Menu (right mouse click) _ Create.
2.     In the subsequent dialog box, choose the source system type Database Source System and choose   Transfer.
3.     In the following screen enter the logical system name (= DB connection) and a descriptive text for the system, then choose   Continue.
You get to the screen Change View ¡§Description of Database Connections¡¨: Detail.
4.     Select the database management system (DBMS) with which you want to manage the database. With this entry you determine the database platform this connection concerns.
5.     Specify the database user under whose name the connection needs to be opened.
6.     Enter the DB Password twice for the user for authentication across from the database when creating the connection. This password is encrypted and stored.
7.     Enter the technical information for opening the database connection. This information, which is necessary for creating a connection, is dependent on the database platform and encompasses the database names in general, as well as the database host on which the database runs. The string displays the respective client library to which the database needs to create the connection

Inventory Price Lists Period and Volume Discounts

Hi all
Is it possible to mass import Inventory Price Lists Period and Volume Discounts for all Items?
Kedalene Chong

Hi,
To get correct result, you need to split your existing records in maximum of 1000 records per import. If more than that, you may get incorrect update.
Please check SAP note for updating price list:
903392
- DTW_How to set PriceList field for the Items_Price object
Thanks & Regards,
Nagarajan

Differences listed between ASCP Optimization and Inventory Optimization ?

Does anyone has a listed readymade document listing the differences between ASCP optimization and Inventory optimization modules.
thx for your help.
thx and rgds,
Pankaj

Hi,
As explained IO will recommend time phased Safety stocks it also provides various constraint option, we can make use of it as per our requirement.
In ASCP, following optimization are available:
1. Maximize inventory turns
2. Maximize plan profit
3. Maximize on-time delivery
If you want to use the same optmization in IO, we can fulfill the requirement by available IO constraints say max on-time delivery thro enforce service level constraint.
Hope it will help u.
Tks
M J

Inventory posting List report

Hello,
I have an A/R invoice posted of an item as its Quantity is 2 in the SAP Business one system. when i go to the Inventory posting list report, this same report only displays the Qty as 1 instead of 2. what could be the reason why this is happening? This problem is specific to this one invoice. The rest of the invoices have correct Quantities displayed in the Inventory posting list report.
Thank you.
Regards,
Maureen.

Hi Peter,
please see these screen shoot for this specific item and the corresponding inventory posting list and also see another invoice of the same item.
pic 1, invoice 90001017
pic 2. its corresponding inventory posting list.90001017
pic 3 the same item , different invoice
pic 4 corresponding inventory posting List for invoice above
note of the differences on the Quantity it displays.
thank you.
kind regards,
Maureen.

Physical Inventory Difference List

Hi SAP Gurus,
Is there any T-Code other than MI20 for getting Physical Inventory Difference List. We want Physical Inventory No. (IKPF-INVNU) and Physical Inventory Ref (IKPF-XBLNI) both in the list. But in MI20 only Physical inventory No. is visible.
Full Points if helped.
Regards
Ishu

hi, can u check the required information from through
ISEG & IKPF table

Invoice and Inventory App

I run a small clinic with one acupuncturist and would like to track her daily sales on her iPad. Ideally, she'd write up an invoice (no need for printing) with the treatment cost and the supplements purchased for each patient. Then at the end of the day, we would track the income earned from treatments and from supplements. Also, I'd like when she lists the supplements sold, that those items are automatically removed from the inventory list.
Quickbooks could do this, but I really don't want a huge, cumbersome program. I use Quicken '07 for my accounting and I want to keep things simple. I just need a way to track income and inventory. Any recommendations would be appreciated. Thanks!

You might want to invest in Filemaker Pro and an appropriate "Solution". There are pre-done inventory templates available. You'd then install "FMGo" on your iPad
This is NOT the simplest solution, but could be the best in the long run. Best part is likely you'd be able to move MUCH if not all of your business to Filemaker.
For some good advice from others on how viable an FM solution would be for you, try:
http://forums.filemaker.com
For some general program info try:
http://www.filemaker.com/
HTH

MRP and log of results

Hello Experts,
When I run MRP, I get a message like ie "10 requisitions have been created". Where can I see a list those requisitions?
I am looking for a log of what happened in the MRP run to look into the details of which documents where created and deleted and so on
rgds
GAR

Hi,
You can see the list of purchase requistions created in two ways..
In ME5A, Give the release date(date on which you ran MRP) and enter the other inputs..
It will give the desired outout.. You can give MRP controller also to narrow your search..
Another way is...
MD04. For the material which ou ran MRP , Check in MDO4..
It ll give you planned orders. Click that planned order and click the icon forpegged req in the small window.. It ll give the list of planned orders and Purchase req. under that final material..
You can then select the planned orders that came under the final material..In a similar way as above you can proceed to get the list of all the purchase reqns..
Hope the above definitely claifies..
with wishes....
karthick

Difference Between Inventory Audit Report & Inventory Positing List Report

Dear all,
Please tell me the difference between these twoInventory Audit Report & Inventory Positing List Report, Because I find difference , when observe Closing and Opening Stock Quantity on 1.4.10 audit report showing 610 units but on 1.4.10 posting list showing 973 units of opening stock
Why so happen ? can anybody explain............
Thank you
Komanduri

Hi......
Please read below.....
Inventory Audit:
This report provides an audit trail for the posted inventory transactions in the chart of accounts.
You use this report to make comparisons between the accounting view (inventory balance accounts)
and the logistics view (inventory value displayed by the audit report). The report explains the value changes in inventory accounts.
Inventory Posting List:
The inventory posting list provides an overview of all postings in the system, based on various selection criteria and sort options. You can generate a report for specified warehouses based on one of the following selection criteria:
Item
Business partner
Other: Enables you to specify a selection criterion such as warehouse or sales employee.
Inventory Transfer:
You use this function to transfer inventory from one warehouse to another. An inventory transfer can also be carried out as a consignment for a customer. The items are then stored in the customeru2019s warehouse and are sold from here.
You cannot change the table after it has been added. If you display an existing inventory transfer later on, none of the fields in the table are active.
You can, therefore, only correct an inventory transfer table that has not been entered correctly by entering a compensatory goods movement later.
For more detail please refer help file in SAP.....
Regards,
Rahul

Like "inventory posting list" query

Hallo..
In SAP B1, i found 'Inventory Posting List' report.
And i need modify the report, so i must create a new query.
But now, how to find the table can show stock balance in period date?
example:
stock Item No: A1234
2007-12-01 Qty : 10 (last balance)
2007-12-02 Qty : 13 (in 3)
2007-12-03 Qty : 9 (out 4)
How to show stock in only between dec 02 - dec 03, :
2007-12-02 Qty : 13 (last balance)
2007-12-03 Qty : 9 (out 4)
Anyone can help me? I confused searching, i wasted about 1 day to search stock history table?
Thankyou

Hi Suda,
thanks for your respond.
But i cant found the last quantity (balance qty), but i found Onhand in OITM.
So i must doing a manual calculation.
i assume i get last stock from OITM.Onhand = 10, then i query OINM day by day, and i SUM(Onhand-(Dec02+Dec03))
Or you have another solution? Thanks
but i think OnHand in OITM is not actually qty, because i use inventory posting list, i have all open balance is bigger than OITM.Onhand
Edited by: dony donse on Dec 31, 2007 11:29 AM

Combined Report for Purchasing and Inventory Management.

Hi All,
Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one.
Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty and value etc.).
Regards,
kumar

I don't know any. We have one Z or if you want you can make a simple query.
Best regards.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

What is the best way to store and iterate over lists of words?

Hi,
Im trying to create a naive bayesian classifier to attribute aurthorship to some texts. I have three text files in the form of a list of words (listA, listB and listC, where listA is a disputed text and listB, listC are those of known authors). I need to feed these into my program, than compare listA to listB (to check if listA has the same words as listB), perform the classification and do the same for listA and listC.
Im new to java and would like to know the best way of comparing the text files....could i store listA in an array....listB in a hashmap, iterate over the hashmap to check which words are also contained in listA and store the similar words in a seperate arraylist?
plz help.

If you just want to check if one set of words contains another set of words then something implementing java.util.Set might be sufficient. Read the API docs, you don't need to write much code yourself. Maps are for looking up values based on keys; your problem statement doesn't mention that so you don't need them. Lists are for when the order of entries matters. Read this for more information:
http://java.sun.com/docs/books/tutorial/collections/index.html

MRP and Inventory psoting list

Similar Messages

Maybe you are looking for