MRP and Open PO

Hi all,
Our client till now have not used MRP. But now they are planning to use it. Every settings for MRP is done. But their requirement is "for a particular PO(which was created before MRP), 1000 quantities of a material are pending for GR. Out of 1000, only 750 should be considered for MRP". So my question is
1. Is it possible to do like this?
2. If yes, what can i do for rest 250 quatities? for the time being should i do some issue or something??
Please help me on this
Thanks.
Rosh

Hi,
MRP is to find out the requirement and to create the proposals like PR/Prod order /proc order.
A Po is created means the availability check will consider the PO qty if the PO is created before MRP settings or after.Please check the availability check settngs at spro.
If the remaiinig qty to get to come into new MRP run, change the PO qty to 250 and run MRP.
if the PO is not issued to vendor, try to delete the PO so that if there exists any requirement it will come into MRP.
If the PO executed , or if a PO is created normally that much qty will not be available for MRP.Sytem will treat it as no requirement for that PO qty.
Please note that MRP run is to generate for requirements like PR/planned order r.Once they get conveted to PO or Prod Order this qty will be treated as available qty for the requirements like sale.
Regards,

Similar Messages

Open PIR quantity, unconverted Pld orders and open Prod/ STO orders

Dear all,
How to deal with open PIR quantity, unconverted planned orders and open production/ STO orders in the next MRP run? Do we need to delete/ reduce them manually?
Thanks and Regards,
Raghu

Hi Shiva,
Thanks for your immediate response. I have still some confusion.
Last month, I have material A with Production order quantity of 30000.
'A' has a component 'B' which is an in-house produced material. Three planned orders each of 10000 were generated for B. Of these two planned orders were converted to production orders. One is still in planned order form.
This month I am not going to use this planned order of B. I get new requirement for A. So during MRP run I get the planned orders for B also.
For the last month requirement, as I have not converted one planned order of B to prod order, there will an open quantity of A prod order in this plant and open STO quantity in another plant. Again the PIR will also be not reduced to the same extent. If I reduce the PIR manually or through some reorganization, what about the open quantity of prod order and STO
I think I can TECO the prod order of A. Is there any such thing for STO also?
Thanks and Regards,
Raghu

MRP and Inventory psoting list

Hello
2 questions
when we run MRP and ask to take into account the open purchase order we have recommendation without open purchase quantity taken into account and all purchase orders open are made in 2009
Could it be because of the new year ?
Second question in item screen we right click and have for each item the option to see posting list but since 1st of January teh posting list is without stock movements and does not show 2009 movements
Do you know if we can somehow define the dates where the posting list is shown ? They want to see obviously stocks movements from 2009
Thank you for your help in advance

If your financial year ends on the 31st of December then the short cut from Item Master Data will not show the previous financial years transactions. This is standard B1 functionality and you cannot define the dates.
You can run the full Stock Postings list from the Reports menu and this will give you all transactions.
In your MRP you must make sure that the From Date includes all the purchase orders in the previous year. For example if your oldest purchase order is 01.10.09 then your start date in horizon for MRP should be 01.10.09. This will put all your purchase orders in the Past Due section but will include them in all calculations for ordering stock.
Regards,
Michelle

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

How to extract Cleared and Open Items from SAP R/3?

Hi experts,
I have a requirement from user to extract cleared and open invoice items from SAP R/3.
Can someone tell me how to do that?
Thanks!

Hi,
Use the Data source 0FI_AR_4 to Know the status (0FI_DOCSTAT) of payment to be done by customer.
OR
Enhance the 2LIS_13_VDITM with VBUP fields which will give the status of Billing.
With rgds,
Anil Kumar Sharma .P

Open sales orders and open deliveries and open billing doc to sap from legesy

Dear all
i have some open sales orders and open deliveries and open billing doc are there in the legesy system
so i want to know how to transfer the doc to sap by using lsmw plz tell me

Hi Amith,
it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
http://scn.sap.com/thread/1012472
there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
Pls practice this in your sand box or quality system before working it in the client requirement.
Hope this helps to you
Regards
Sundar

Dsatsource /ODS/Cube for Open PR and Open PO"

Dear Experts
I want to build a report in which I need to show "Open PR and Open PO" but I could not locate these fields in the BW CUBE / ODS / DATASOURCES. Can anybody tell me where I can find these fields..........
Dinesh Sharma

Dear,
There is no specific standard data source is not available to fetch us "Open PO" or "Open PR". first vll talk about PO.
For open PO,
case - 1
         Need to report count of all PO's which are in open status.
Case-2
        Need to report TBQ ( to be delivered Qty ) against each over due PO.
Basically we have - EKKO - HEADER , EKPO - ITEM AND EKET - SCHEDULE LINE ( GRC - GOODS RECEIVED ) is available,
so create a view, take all these three tables EKKO, EKPO and EKET.
EKPO
1     DELIVERY COMPLETED INDICATOR     ELIKZ
1     DELETION INDICATOR IN PD     LOEKZ
1     ARTICLE NUM     MATNR
1     SITE     WERKS
X     PO DOCUMENT NUM     EBELN
     PURCHASING ORDER QUANTITY     MENGE
     PURCHASING ORDER UOM     MEINS
     NET ORDER VAL IN PUR ORDER CURRENCY     NETWR
     NET PRICE IN PURCHASING DOC IN DOC CURRENCY     NETPR
no     PRICE UNIT     PEINH
X     ITEM NUMBER OF PURCHASING DOCUMENT     EBELP
EKKO
     DATE ON WHICH RECORD WAS CREATED      AEDAT
     PURCHASING DOCUMENT DATE     BEDAT
     DELIVERY DATE     EQ_EINDT
     RELEASE INDICATOR PURCHASING DOC     FRGKE
     RELEASE STATUS     FRGZU
0PO_UNIT     PURCHASING DOCUMENT NUM     EBELN
     CURR KEY     WAERS
EKET
     QUANTITY OF GOODS RECEIVED     WEMNG
     PURCHASING DOC NUM     EBELN
     ITEM NUM OF PURCHASING DOC     EBELP
Logic - create a generic DS, by view, FIRST send the data to DSO, there mention a field like TDQ ( to be deliver qty ), TDQ = po qty - goods received qty. -
create a cube above DSO, set a filter, allow only those records who has TDQ <>0, so your cube contains only pending PO.
hope it helped u.
Thanks,

Open report with "Save as" and "Open with" dialogue

Hi,
I'm using jasper reports within my application. I manage to open them in a new window but in that case the url containing JasperServer username and password is shown. I would like to open the report without showing the url.
I tryed using a database procedure (http://sqlcur.blogspot.com/2009/02/jasperreports-in-apex.html) but all I get is a alert window saying "file does not begin with ' pdf-'". Couldn't see what is the problem (I used the same procedure as Ino has in his example) so I thought of another way. Is it possible, when someone clicks a button to open a report, to open that report with a "Save as" and "Open with" pop up window?
The javascript function that I use:
<script language="JavaScript" type="text/javascript">
function openLAPopUpJasper(url){
w = open(url,"winLov","toolbar=false,menubar=false,location=false,resizable=yes, //scrollbars=yes,status=yes,fullscreen=true");
if (w.opener == null)
w.opener = self;
w.focus();
</script>
Thanks in advance!
Edited by: Josip on Oct 29, 2009 2:55 AM

Anyone?

Mail applications is blank when I open it, then it closes and opens again by itself, keeping blank

In my Ipad, when I open Mail application it is blank. It stays like this for a few seconds, then it closes and open again by itself. Keeping all time blank.

Have you tried to force quit the app. Double tap the home button. Scroll sideways if needed to bring the mail app preview up on the screen. Flick that preview up and off the screen to close the app. Tap on the home page preview to exit the mode. Then try your mail again.
Other things people have needed to do, especially after an update is to go into the settings, mail contacts and calendars, delete their mail account (it only deletes it off the iPad not out of existence) then exit out, go back i and re-enter the info.

How to pop up "save" and "open" window - Help with construct xml

In my report there is a column link which is pointing to another HTML page that has xml data displayed in a textarea field. So when user clicks on the column link, he gets to directed to the page that have the xml data in text format.
My question is, how can i make the xml data display as a file, so when the user clicks on the column link, a window with "save" and "open" will pop up so the user can save the xml data as a file?
Has anyone done something similar like this? any help is appreciated!
Regards,
gina
Message was edited by:
gina

Thank you Tine, I tried to use the 'Export XML' report template and tried to do the following query:
SELECT XMLElement("oai_dc:dc",
XMLAttributes('http://www.openarchives.org/OAI/2.0/oai_dc/' AS "xmlns:oai_dc",
'http://purl.org/dc/elements/1.1/' AS "xmlns:dc",
'http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi",
'http://www.loc.gov/mods/v3' AS "xmlns:mods"
XMLForest(
dctitle AS "dc:title",
dccreator AS "dc:creator",
dcsubject AS "dc:subject",
dcdescription AS "dc:description",
dccontributor AS "dc:contributor",
dcdiscovery AS "dc:discovery",
dctype AS "dc:type",
dcformat AS "dc:format",
LOWER('ksl:posters-' || dcidentifier) AS "dc:identifier",
dcsource AS "dc:source",
dclanguage AS "dc:language",
dcrelation AS "dc:relation",
dccoverage AS "dc:coverage",
dcrights AS "dc:rights")) AS "RESULT"
FROM table_name
and here is what returned in the “save as" file:
<?xml version="1.0" encoding="utf-8" ?>
- <XMLREPORTREGION>
- <ROW ROWNUM="1">
<RESULT>[datatype]</RESULT>
</ROW>
</XMLREPORTREGION>
How can i construct the query so that it returns the data in xml format like the following?:
oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title>Rose</dc:title>
<dc:creator>Smith Black</dc:creator>
<dc:contributor>Smith Black</dc:contributor>
<dc:type>Stencil</dc:type>
<dc:format>image/tiff</dc:format>
<dc:format>image/jp2</dc:format>
<dc:description>13 3/4" X 9 1/2"</dc:description>
<dc:relation>Some collection</dc:relation>
<dc:date>1987</dc:date>
<dc:subject type="LCSH">Art Project</dc:subject>
<dc:subject type="LCSH">........</dc:subject>
<dc:subject type="LCSH">.........</dc:subject>
<dc:language>eng</dc:language>
<dc:rights>......<dc:rights>
<dc:identifier>.....</dc:identifier>
</oai_dc:dc>
I don't know much about xml, any help would be really appreciated.
Thanks,
gina
Message was edited by:
gina

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

How do I go back a page on the Ipad mini? I do not see any arrows anywhere. Also when I go to my yahoo email account and open an email I can not find how to go back and log out. This is our first Ipad and it is very different frm android. Thanks

We just purchased our first Ipad. It is a mini with retina display 16 GB. How do I go back a page? I see no arrows to page back. Also when I log into a yahoo email account and open an email I see now way to log out? Thank you for any help

In Safari, (the web browser), there are specific arrows to go back and forward through website pages.
In other Apps, it will depend on how the App is built.
As to Yahoo Mai it depends on where you are viewing the email. If you are using the Mail App, then you don't log out. The Mail accounts in the Mail App are always there.
If you are using the Yahoo App, You can Tap on the folder at the top, then on your account/name, and then on Sign Out.

How can I select more than one bookmark at a time so that I can then open multiple bookmarks -- without the aggravation of going back to the list and selecting and opening each one.

From my dozens of bookmarks, I often would like to open 5 or 6 of them at once -- perhaps a couple of weather reports, a couple of radio stations, a couple of other websites. But I see no way of doing this without laboriously finding a bookmark, selecting it, opening the website, then returning to the bookmarks, finding the second bookmark, selecting it, opening the website, and on and on. Surely there's a way for me to select multiple unrelated bookmarks and open them at the same time. Thanks much for your help. Don

''Actually there is a picture and better explanation in the corresponding History article''
* ''http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox ''
Look where this picture is embedded in the article topic [http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox#Selecting_history_items Selecting history items]
* http://kb.mozillazine.org/images/Fx3_history_sidebar_selections2.png
Selecting, viewing, and searching the sidebars and library lists is explained in both articles previously mentioned.
Multiple selection is something built-in to a lot of applications and into all browsers, and yes you guessed correctly the favicon it the thing to the left of the bookmark and that is what is is called in all browsers. And if you look at selection you will find that it matches what you asked for, especially if you were to do a search from the search bar on the bookmark or history sidebar. But there is also no problem opening up a single bookmark or history item into a new tab, with either Ctrl+click or Ctrl+Shift+click in the area to the right of the favicon either.
However I would suggest making a change to your configuration options so the the same keyboard shortcut is used from a link and from your bookmarks. See those keyboard shortcuts in the following along with the footnotes just below the table for them in
* http://www.mvps.org/dmcritchie/firefox/keyboard.htm

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

MRP and Open PO

Similar Messages

Maybe you are looking for