MRP Area - Vendor Stock separate MRP
Dear Experts,
I would like to consult this solution. Currently we have a standard Subcon PO (MM). In this solution, we provide stocks to vendor via 543. Now, business doesnt want the vendor stocks to be included during MRP. How to set up?
Can I use MRP Area (subcon type) with this just like MRP Area for Slocs?
Appreciate your help. Thank you!
I reckon the business wants to see all the stock acquired though purchase made in that MRP area. Since they seemed to concerned about planning and may want to ignore the stock ordered manually (you need to confirm this with business). You may have to create SQL query to report this.
In the table EBAN, filter out all the values the field ESTKZ = 'B' and BERID = your MRP area (if BERID is empty you need to input all the storage locations assigned to that MRP area) and the field EBELN, EBELP, BSMNG contain the purchase order data created from the purchase requisition. You need to inner join that to the purchase order table, EKPO and inner join this to table EKBE (there you can find the material document also) and out put the quantity received.
Edited by: Jeevan Sagar on Oct 25, 2011 11:14 AM
Optional analysis: If you just want to analyze all the stock per MRP area input all the storage locations in MB5B
Similar Messages
-
Stock Transport from plant to MRP Area
I have been looking for explanation on how to handle replenishment of MRP area storage location stocks within a plant. We use Special procurement types but they are set up on for plants, not MRP areas. Can anyone explain how this works and the configuration to make it work? Were setting up a warehouse as an MRP area and need to replenish its stocks with MRP.
Aren't your questions answered in SAP online help?
Integration
The process is the same as for Storage Location MRP. In contrast to the storage location MRP, you can use all MRP procedures and are not limited to the reorder point planning procedure.
Prerequisites
In Customizing for MRP, you have created the special procurement key for Stock transfer from plant to MRP area for the plant in which the MRP area is located. You have defined the following parameters:
- Procurement type: F for External procurement
- Special procurement: U for Stock transfer
- Plant: Number of plant, to which the MRP area belongs.
In the material master, you have created the MRP area segment and assigned the special procurement key Stock transfer from plant to MRP area.
Features
During MRP, the system generates a stock transfer reservation for the material in the MRP area and a material reservation in the plant MRP area.
The external procurement storage location that you have entered in the MRP area segment of the material master is used as the receiving storage location. If you have not maintained this field, the system uses the receiving storage location that you entered for the MRP area in Customizing.
The actual procurement is processed by the plant. With stock transfer to the MRP area, you carry out the transfer posting for the material with reference to the reservation.
Standard procurement key 45 is for that purpose: plant: 1000 (V460A-WERKS), procurement key F; special procurement: U; plant: 1000 (V460A-WRK02).
So, in both fields you have to write the same plant as it is clearly written in SAP onilne help.
As SAP help says: a Stock transfer reservation is created. Using MIGO (A08; R09) you can post the goods movement by mvt 311 with reference to the Stock transfer reservation (MB1A is also good).
Why don't you test in in your sandbox system and you will see how it works.
(If you want to use STO (purchasing document type UB) in this process you have to go trough OSS note 599915)
Edited by: Csaba Szommer on Jun 12, 2009 11:46 PM
Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM
Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM -
Hello SAP-Guruu2019s
Pls tell me the Procedure/steps/Details to maintain MRP-area for a Vendor & also for a Sub-Contractor.
Any comments welcome & Thanks in advancHi,
Pls. find the following details regarding MRP Area :
MRP Area
Definition
The MRP area represents an organizational unit for which material requirements planning is carried out independently.
Basically, there are three types of MRP area:
Plant MRP Area
The plant MRP area initially contains the plant together with all its storage locations and stock with subcontractors.
When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations. This is because they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location, by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant.
You can also group several storage locations into one MRP area, by creating an MRP area and assigning the storage locations to it. These storage locations are then planned together.
A storage location of a plant may be assigned to only one MRP area.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor.
A subcontractor may be assigned to only one MRP area. An MRP area of the subcontractor type may also only contain one subcontractor.
Use
You can carry out MRP specifically for the determined MRP areas. This enables you to carry out differentiated material requirements planning. The requester can be, for example, the production on a particular assembly line or a subcontract order.
The MRP area allows you to have specific control over the staging and procurement of important parts produced in-house and purchased parts for each shop floor area. You can, however, also plan the provision of components for the individual subcontractors.
MRP areas of the storage location or subcontractor type are only suitable for:
components that are planned and produced for stock
finished products that are planned and produced for stock. By assigning a storage location in a sales order or by entering an MRP area when creating the planned independent requirements, you can define whether a material is planned in the plant MRP area or in the MRP area of the storage location.
Finished products and important assemblies intended for make-to-order or engineer-to-order production are always planned in the plant MRP area.
The planning run takes into account the planning with MRP areas as follows:
If you do not enter a separate scope of planning, the system plans the whole plant, that is, all MRP areas in the plant, during the total planning run. If you want to carry out a total planning run for a particular MRP area only, you must specify the required MRP area in the scope of planning.
During single-item, multi-level planning, the system plans the selected material in the MRP area entered. In addition, the system takes into account planning file entries from other MRP areas, for example, if the material is to be procured using stock transfer.
During single-item, single-level planning, the system plans the selected material in the MRP area entered only.
Structure
You define the MRP areas in Customizing for MRP. You can thereby assign the following to an MRP area:
one or more storage locations (example: you want to carry out planning for a particular assembly line and therefore assign a production storage location to the MRP area)
a subcontractor.
You assign the various MRP areas to the materials in the material master. For this, you create an MRP area segment for a material for every MRP area, in which it is used. In this MRP area segment, you can define MRP parameters such as, for example, the lot size or MRP type. This allows you to plan the material differently in the MRP area from how you plan it in the plant MRP area.
MRP with MRP areas for the material is not activated until the material has been assigned to an MRP area. If you have not assigned a material to an MRP area, that is, you have not created an MRP area segment in the material master, the material will continue to be planned in the plant MRP area only. If you have assigned an MRP area to it, the system can plan it in the plant MRP area and in the assigned MRP area.
Integration
You can carry out material requirements planning for MRP areas using all MRP procedures and all lot-sizing procedures.
You can also carry out an independent material forecast for MRP areas using your own parameters.
The material consumption values are updated separately for each MRP area.
A separate ATP check is carried out for each MRP area.
If several storage locations belong to an MRP area, the system can also carry out a check at two levels, that is, at storage location level and at MRP area level.
Example: Subcontractor
You can also carry out planning for components to be provided in subcontracting using an MRP area by defining an MRP area for every subcontractor and assigning the components to be provided to the MRP area of the subcontractor. You therefore plan the requirements to be provided for these components for one subcontractor separately from all other requirements (see Planning for Components to be Provided in Subcontracting).
Depending on the requirements situation, the system creates either stock transfer reservations from the plant to the stock of material provided of the subcontractor or it creates purchase requisitions within subcontracting/third-party order processing, according to the special procurement key settings.
Implementing MRP Areas
Implementation Options
The main reason for you to implement MRP areas is if you would like to plan materials, which are required in different shop floor areas, storage locations or by subcontractors, separately from one another.
As soon as you have activated materials requirements planning with MRP areas, this type of MRP is active at client level, that is, MRP will be carried out in this way in all plants.
Material requirements planning with MRP areas cannot be reversed.
Process Flow
You can implement material requirements planning with MRP areas in three steps:
You convert the existing planning file entries at plant level to planning file entries at MRP area level.
During the conversion, the system creates a plant MRP area for every plant as a background job. This, however, will not affect your planning. The processes in material requirements planning and the planning results remain unaffected.
The conversion is also useful even if you do not work with MRP areas, but still have to plan for several plants, as the new planning file improves system performance during the planning run.
You activate MRP with MRP areas in Customizing for MRP. This causes the MRP area field to appear in the applications of MRP and in related areas. When you enter the plant number, the system automatically fills the field with the number of the plant MRP area. The number of the plant MRP area is the same as the plant number.
This does not affect the planning run as the plant MRP area still corresponds to the present plant.
You define an MRP area, for example, for a storage location. You then assign the materials that are to be planned for this storage location, by creating an MRP area segment in the material master.
Materials requirement planning for this storage location is then carried out separately. The storage location stock is no longer included in the available stock of the plant MRP area. The receipt and issue elements of this storage location (MRP area) are also not taken into account in the plant MRP area. They are only taken into account in the MRP area of the storage location.
If you have already worked with storage location MRP the system still carries out storage location MRP even after the activation of MRP areas. You need to decide in principle whether you want to continue using storage location MRP or whether you want to create MRP areas for the storage locations that are planned separately. It is not possible to simultaneously plan a material using storage location MRP and an MRP area for the same storage location.
If you decide to use MRP areas, you should then try to convert all storage locations that are planned separately to MRP areas in one step. Before you assign the material to an MRP area, you must remove the MRP indicator, which is located in the material master at the storage location organizational level (view MRP 4) in the screen area Storage location MRP.
Even if you have defined MRP areas in Customizing, the system plans the materials in the plant MRP area until you assign the MRP areas to the materials.
Only the assignment of one or more MRP areas to a material, by creating MRP area segments in the material master, actually cause changes in the material requirements planning.
Hope this helps.
Regards,
Tejas -
Hi PP Gurus,
I want to know about the complete process of MRP Areas.
1) Complete step by step process in terms of config. & front end in SAP.
2) How to activae it for Plant, Storage location & vendor.
3) Difference between above three & where they are exactly used.
The person who helps will be awarded points = 10.Sure.
RegardsHi,
Pls. find the following details regarding MRP Area :
MRP Area
Definition
The MRP area represents an organizational unit for which material requirements planning is carried out independently.
Basically, there are three types of MRP area:
Plant MRP Area
The plant MRP area initially contains the plant together with all its storage locations and stock with subcontractors.
When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations. This is because they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location, by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant.
You can also group several storage locations into one MRP area, by creating an MRP area and assigning the storage locations to it. These storage locations are then planned together.
A storage location of a plant may be assigned to only one MRP area.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor.
A subcontractor may be assigned to only one MRP area. An MRP area of the subcontractor type may also only contain one subcontractor.
Use
You can carry out MRP specifically for the determined MRP areas. This enables you to carry out differentiated material requirements planning. The requester can be, for example, the production on a particular assembly line or a subcontract order.
The MRP area allows you to have specific control over the staging and procurement of important parts produced in-house and purchased parts for each shop floor area. You can, however, also plan the provision of components for the individual subcontractors.
MRP areas of the storage location or subcontractor type are only suitable for:
components that are planned and produced for stock
finished products that are planned and produced for stock. By assigning a storage location in a sales order or by entering an MRP area when creating the planned independent requirements, you can define whether a material is planned in the plant MRP area or in the MRP area of the storage location.
Finished products and important assemblies intended for make-to-order or engineer-to-order production are always planned in the plant MRP area.
The planning run takes into account the planning with MRP areas as follows:
If you do not enter a separate scope of planning, the system plans the whole plant, that is, all MRP areas in the plant, during the total planning run. If you want to carry out a total planning run for a particular MRP area only, you must specify the required MRP area in the scope of planning.
During single-item, multi-level planning, the system plans the selected material in the MRP area entered. In addition, the system takes into account planning file entries from other MRP areas, for example, if the material is to be procured using stock transfer.
During single-item, single-level planning, the system plans the selected material in the MRP area entered only.
Structure
You define the MRP areas in Customizing for MRP. You can thereby assign the following to an MRP area:
one or more storage locations (example: you want to carry out planning for a particular assembly line and therefore assign a production storage location to the MRP area)
a subcontractor.
You assign the various MRP areas to the materials in the material master. For this, you create an MRP area segment for a material for every MRP area, in which it is used. In this MRP area segment, you can define MRP parameters such as, for example, the lot size or MRP type. This allows you to plan the material differently in the MRP area from how you plan it in the plant MRP area.
MRP with MRP areas for the material is not activated until the material has been assigned to an MRP area. If you have not assigned a material to an MRP area, that is, you have not created an MRP area segment in the material master, the material will continue to be planned in the plant MRP area only. If you have assigned an MRP area to it, the system can plan it in the plant MRP area and in the assigned MRP area.
Integration
You can carry out material requirements planning for MRP areas using all MRP procedures and all lot-sizing procedures.
You can also carry out an independent material forecast for MRP areas using your own parameters.
The material consumption values are updated separately for each MRP area.
A separate ATP check is carried out for each MRP area.
If several storage locations belong to an MRP area, the system can also carry out a check at two levels, that is, at storage location level and at MRP area level.
Example: Subcontractor
You can also carry out planning for components to be provided in subcontracting using an MRP area by defining an MRP area for every subcontractor and assigning the components to be provided to the MRP area of the subcontractor. You therefore plan the requirements to be provided for these components for one subcontractor separately from all other requirements (see Planning for Components to be Provided in Subcontracting).
Depending on the requirements situation, the system creates either stock transfer reservations from the plant to the stock of material provided of the subcontractor or it creates purchase requisitions within subcontracting/third-party order processing, according to the special procurement key settings.
Implementing MRP Areas
Implementation Options
The main reason for you to implement MRP areas is if you would like to plan materials, which are required in different shop floor areas, storage locations or by subcontractors, separately from one another.
As soon as you have activated materials requirements planning with MRP areas, this type of MRP is active at client level, that is, MRP will be carried out in this way in all plants.
Material requirements planning with MRP areas cannot be reversed.
Process Flow
You can implement material requirements planning with MRP areas in three steps:
You convert the existing planning file entries at plant level to planning file entries at MRP area level.
During the conversion, the system creates a plant MRP area for every plant as a background job. This, however, will not affect your planning. The processes in material requirements planning and the planning results remain unaffected.
The conversion is also useful even if you do not work with MRP areas, but still have to plan for several plants, as the new planning file improves system performance during the planning run.
You activate MRP with MRP areas in Customizing for MRP. This causes the MRP area field to appear in the applications of MRP and in related areas. When you enter the plant number, the system automatically fills the field with the number of the plant MRP area. The number of the plant MRP area is the same as the plant number.
This does not affect the planning run as the plant MRP area still corresponds to the present plant.
You define an MRP area, for example, for a storage location. You then assign the materials that are to be planned for this storage location, by creating an MRP area segment in the material master.
Materials requirement planning for this storage location is then carried out separately. The storage location stock is no longer included in the available stock of the plant MRP area. The receipt and issue elements of this storage location (MRP area) are also not taken into account in the plant MRP area. They are only taken into account in the MRP area of the storage location.
If you have already worked with storage location MRP the system still carries out storage location MRP even after the activation of MRP areas. You need to decide in principle whether you want to continue using storage location MRP or whether you want to create MRP areas for the storage locations that are planned separately. It is not possible to simultaneously plan a material using storage location MRP and an MRP area for the same storage location.
If you decide to use MRP areas, you should then try to convert all storage locations that are planned separately to MRP areas in one step. Before you assign the material to an MRP area, you must remove the MRP indicator, which is located in the material master at the storage location organizational level (view MRP 4) in the screen area Storage location MRP.
Even if you have defined MRP areas in Customizing, the system plans the materials in the plant MRP area until you assign the MRP areas to the materials.
Only the assignment of one or more MRP areas to a material, by creating MRP area segments in the material master, actually cause changes in the material requirements planning.
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Nov 7, 2008 12:02 PM -
MD04 - Subreq - Storage location MRP area
Hi all,
I have an issue of Subreq in MD04 which is not assigned to the the good MRP area.
I'm explaining :
Business process
-> I work with a subcontractor
case 1 : either I buy raw material to be processed and delivered it directly to my subcontractor
case 2 : either I send raw material from my physical stock to my subcontractor
-> I create subcontracting purchase order with indication as components, the raw material.
-> In case of the components are already in my subcontractor (case 1), the reservation (Subreq) should not consume my physical stock.
-> In case of the components are in my physical stock (case 2), the reservation (Subreq) should consume the physical stock.
Solution choosen
Then I decided to create a storage location MRP area : "EXTERN" as External.
I assigned a storage location "EXT" to this MRP area.
I assigned this MRP area to the material in MRP1 / MRP Area.
In the purchase order, in the components popup,
For case 1 : I assigned "EXT" as Prod.Stor.Loc and Supply area
For case 2 : nothing special is filled
Issue
For the case 1, althought I assigned the storage location "EXT", the Subcontractor Requirement is not attached to the good MRP area.
WHY?
Remark : I didn't use the subcontracting MRP area because I would like to have 2 cases : case 1 & case 2.
Thank you in advance for your help about this problem which make me nervous !Hello Catherine
Your system is working as designed. The following note explains the system design in more detail:
503497 - Subcontracting and MRP areas
Take a look on the relevant information provided by this note below:
Reason and Prerequisites
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
Please observe that the mentioned modification note 376050 only makes the storage location available on table RESB, so that you can use it on custom report. This modification will not make the storage location to be considered by MRP or on MD04.
BR
Caetano -
Is there a possibility to maintain source list for MRP purposes
at storage Location level? We receive requirements from a couple
of our subsidaries and we were consolidating this to be a single
requirement for our suppliers, however this has changed we have
to now show each subsidary's requirements individually. We
currently only use a single plant, previously we created
additional plants for this and maintained a separate source list
for each. Is this the best way to represent and run MRP for each
subsidary? Thanks.Dear Kennedy,
Source list for Storage Location level not possible!!
An MRP area represents an organizational unit for which you can perform material requirements planning separately.
An MRP area can include one or several storage locations of a plant or a subcontractor. You can define MRP areas in a plant.
By defining MRP areas, you can perform MRP for each area. This means the right quantity of materials can be provided on time for each area, such as a production line, a storage location for spare parts, or subcontractor stock.
Bye,
Muralidhara -
Pass on Material requirements to MRP areas within Plant
- We are on ECC 6.0 & have a scenario wherein material requirements from depots are passed on to respective plants according to the settings defined in the Special Procurement key in the Material Master (MRP View)
- The requirement from depots are passed on to the manufacturing plant & further down to the Plant in which MRP areas are defined, in the form of Planned Orders, if the stock is not sufficient at depot.
- For Subcontracting, we have various MRP areas within a single separate plant. The requirement is that PR that is generated for STO should be able to pass the requirement to an MRP area (after stock checking at MRP area level), (system to decide the MRP area to be selected for passing on the requirements).
- Currently the system is passing the requirements & checking the stock at plant level only.
- Stock determination rules donu2019t seem to work here.
- The opening up of the u2018Issue storage locationu2019 in STOu2019s by config: (u201CPurchase order-> - Set up Stock Transport order - > Set up Stock Transfer between storage locationsu201D) is yet to be tested.
- But in that case, only a single MRP area is defined for the material & therefore the requirements may flow directly to that particular MRP area. In case of Multiple MRP areas being defined for a single material, how can we ensure that the system determines a stock checking at one particular MRP area & pass on the requirements to it.
Seeking guidance as to how this issue can be resolved.
Precisely,
REQ.FRM>FLOW TO>AS (MRP element)
Depot>Plant 1>Planned order (PlOrd)
Plant 1>Plant 2>Material reservation (MtlRes)
Plant 2>MRP area of Plant 2>Transfer reservation (TrnRes)dear colleague,
Please check the following info that can be useful:
1) Note 358936 is relevant for MRP areas of type storage location and
not for Subcontractor MRP areas (which you would be knowing).
2) Secondly this note was created as an advance development and not
for any particular customer problem. It was also feasible to
develop this functionality with a small change.
3) The feature of procurement with Schedule lines for components
in subcontractor MRP areas is not available in the standard SAP
suite and there are no plans to develop this in the near future.
This feature would be an advance development.
best regards -
Creating Planned Independent Requirements for an MRP Area.
Hi All,
I am trying to enter Planned Independent Requirements for an MRP Area, with requirement type VSE and I get the following error;
"Only stock requirements are allowed when planning at MRP area level".
I can enter at the Plant level with no problems.
Any guidance is greatly appreciated.
Kevin.The following is the excerpt from SAP [Help|http://help.sap.com/saphelp_470/helpdata/en/81/470a58ddab11d1b55b0000e82de178/frameset.htm] I think you maintained a planning strategy in the MRP view (for the plant) which doesn't support VSE.
You can delete PIRs from an MRP area by deleting the MRP area number from the Creating Planned Independent Requirements screen and recompiling.
When you define the planning strategies and parameters in the material master, these parameters apply to the whole plant, including all the MRP areas within the plant: You cannot maintain the MRP areas separately.
The integration of the MRP area and the assignment of the MRP area in the sales order is supported only by a user exit in the sales and distribution user exit pool.
Sales orders with MRP areas are created irrespective of the availability check control group in the material master.
Customer order processing of production sales orders with the item category (account assignment Step E Single) is only maintained in the MRP area of the plant.
In Customizing and in the MRP area user exit, make sure that when transferring individual sales orders, only requirements types KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE are generated.
The following requirements types are valid for the MRP area: KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE.
You cannot plan with preliminary planning materials in the MRP area.
There is no planning strategy for the material segment of the MRP area.
The planning strategy for the material master segment of the plant is assigned to the material segment of the MRP area.
The consumption mode and the periods of adjustment are derived from the plant in the MRP area of the material master.
Only consumption customer requirements with planned independent requirements are allowed: VSF requirements with KSV and VSFB with KSV. -
Planning a materail at plant level and the MRP Area
Hi Gurus,
Is it possible to plan the same material at the plant level and at the MRP area level ( Storage location MRP)?. If so please provide the steps how this needs to be set-up. what will the implications on the MRP.
Thanks!
Nagesh.Hi,
Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000. Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra) whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
So it is always best practice to select valuation at plant level rather than at company code level.
Reg
Karthikeyan G -
Dear All
Client is having a trading plant which has almost 50000 materials approximately or more. Each Material has two MRP Areas already present in the system but due to some issue client wants to remove or delete one MRP Area and keep other MRP Area only for all materials .However but if MRP Area is deleted Client doesn't want stocks,Sales order, Purchase order of the deleted area to be affected they should be closed in that area only and Other MRP Area is to be used effectively?
Please suggestHi,
Please try FM: 'AUFBAUEN_MDPSX_ANZEIGEN'.
MD06 dame come many table.
Example:
(Plant level)
icm61w-fabkl = wk_fabkl. :Factory calender
imt61d-matnr = p_matnr. : Materials
imt61d-werks = it_tbl-werks. : Plant
AUFBAUEN_MDPSX_ANZEIGEN 呼出
CALL FUNCTION 'AUFBAUEN_MDPSX_ANZEIGEN'
EXPORTING
ecm61w = icm61w
ecm61x = icm61x
emt61d = imt61d
et399d = it399d
ECM61B =
ESFILT =
IMPORTING
icm61m = wa_e_cm61m
imdkp = wa_e_mdkp
imdsta = wa_e_mdsta
TABLES
mdpsx = it_mdps
regards,
Gaito -
Common MRP area for Multiple plants
Hai gurus,
I had created a MRP area called 'X' , this MRP area contians some 10 storage locations.
1) Now my question is whether I can assign the above MRP area 'X" to Multiple plants namely A/B and C
2) Can i run MRP for plant A seperately and plant B seperately and plant C seperately , so that the storage location
stocks in the MRP area 'X' is considered , and create the requirement accordingly, plant wise
waiting for the positive reply.
regards,
sekar chandHAi,
The company has three plants, which is under same management, they produce some similar products in all plants
and some different products in each plants.
so the requirements from all the plants are collected , procurement is made commonly and stored in common storage
locations( As we are calling now as common MRP area) for all the three plants, and based on the requirement the raw material
is moved to three plants.
This is the scenario and not the simulation , so my question is can we assign one single common storage MRP area to
all the three plants, so that while running MRP run for each plant individually or under scope of planning, the stock under
common MRP area is considered each plants , and then the requirement is created accordingly.
regards,
sekar chand
Edited by: sekar chand on Aug 26, 2009 6:00 AM,, -
Hi Friends
I have a Plant with only one storage location and I assign an MRP area with plant type and Storage location type MRP area, when I run MRP for the plant only the plant level requirements are taken into account and the stock is not considered right?? And when I run MRP at MRP area level for storage location the stock is considered and the requirements at plant level are not considered correct?
Please clarify the above
JadeHi,
You have a plant with only one str location. Plant is assigned with MRP area & str location also assigned to str loc MRP area.
So in the plant no str location.
When run MRP at str location level, system will not consider plant level.
MRP run at Plant level will not consider str loc MRP area.
Regards,
Dharma -
Dear experts,
There are few items (C class) for which we initially defined MRP area but now we dont want .
Is there any settings ,so that requirement should generate on plant level & not on the MRP area .
Warm Regards,
Satya
Edited by: satyasappp on Oct 20, 2011 1:42 PMHi
(a) In MRP area view you can mark MRP type as ND for all these C class matls and ensure valid mrp types are assigned in the Plant level MRP 1 view.
(b) Ensure that SLoc indicator is "BLANK" in MRP 4 view , i.e Sloc is planned at plant level MRP as well.
(c) You can do this in Mass transcations "Mm17"
(e) Stop the MRP job(if u have separate job for C calss materilas)
(f) ELSE the other option is that in SCope of planning "Om0e" add this MRP area under the Plant MRP area.
Thanks. -
Scheduling agreement between mrp areas.
Hi all! I have a question.
Can i create scheduling agreement between two storage location whitin one plant for stock transfers? (storage locations - mrp areas).
where can i read about this?
Thanks.Hi Mildar,
Following OSS notes will be useful to you.
1402298 Purchase order handling release with MRP area
1067960 Stock trasnfer reservation not created for MRP area
Following URL will help for the functionlity of MRP areas within APO
http://help.sap.com/saphelp_scm70/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
Please check and confirm.
Regards
Datta -
We have a scenario in which stock is kept at depots across various locations. We have depots created in SAP as Plants and when requirement is generated at Depot, system checks the stock at depot and pass the requirements to Manufacturing plant if stock is not sufficient at Depot in the form of a stock transfer PR. Up to this system is working perfectly fine.
Within plant, we have different MRP Areas for material planning. The requirement is that the PR that is generated for STO, should be able to pass the requirement to an MRP Area (after stock check on the same MRP Area) based on storage locations. Here is where, the scenario starts to fail. The system is passing the requirement and checking stock only at plant level.
I have tried using Stock determination rules, but I cannot utilize stock determination group of one plant to another in the system.
One option that came to mind was manually putting the storage location in the planned order, but with that, the stock checking fails.
While converting planned order to production order, the system accesses the right MRP area, although the material balancing / planning is happening at plant level
Please guide on how I can overcome this problem.Hi,
what i understood is , you are having receiving plant and issuing plant. In receiving plant u are having number of storage location MRP area. Then using stock transfer from plant to MRP area, you want to transfer the stock from issuing plant to MRP area storage loaction of receiving plant.
i hope you have maintained the special procurement key for "Stock transfer from plant to MRP area" in MRP area segement of material Master.
As per this stock transfer PR will be generated at MRP area storage location if enough stock is not avilable.
But your problem is PR is not getting assigned in storage location MRP level , but it is in Plant level. Am i correct.
As per my knowledge, the receipt elements (PR) are assigned to MRP area, using the receiving storage location, which the system determines during the planning Run.
then it checks whether the receiving storage locations has been determined belongs to MRP area or not, if yes means the system assigns the receipt element (PR) to MRP area, otherwise (if not same) it will assign the PR to plant level.
you should have given receiving storage loactions any of the below three area.
1.as receiving storage location for repetitive manufacturing in the production version
2.either as production storage location (in-house production) or as external procurement storage location (external procurement) in the MRP area segment of the material master or in the material master itself
3.as receiving storage location in Customizing for MRP in the IMG activity Define MRP areas
<b>in your case the receiving storage location has been dermined by MRP run might not be same as what you have given in Custoomizing For MRP or in MRP segment.</b>
please check both are same... if my assumption is correct means follow otherwise ignore.
regards
pradeep
Maybe you are looking for
-
Can I access my other email through iCloud
Is there any way to access my other email accounts through iCloud? Example: My work email is through cox mail. (it is [email protected] I never really used my mobileme email (that is now in iCloud). For iCloud to be useful for me, I would want to acc
-
Process chain Logs are not able to view...
<i>Hi Friends,</i> We are facing a typical problem like this... We are loading master data weekly thru process chain.. The problem is dat for 5 weeks back we have kept back ground scheduling dat this chain needs to get run for every
-
Import Previews Low Resolution?
As an Event Photographer I need to be able to quickly preview images from my Cards, Import only the "GOOD" images and transmit these for immediate distribution. Problem is the PREVIEW of the images PRIOR to import are very low resolution and don't al
-
Dear Mates, Please find the requirement below, Due to limited users in ECC system, When launching an ECC transaction from CRM Web UI using Transaction Launcher functionality, the framework is prompting to enter user name and password. Now I need to e
-
Restore deleted add ons in firefox 5
Hi I was earlier installed and used SEO Quake add on with Firefox 5.0.1 . Recently I have to reinstall firefox 5 browser again due to some other reasons. '''All my add ons were removed when install my firefox5 this time. Is it possible to restore tho