MRP background job generating Plnd Ord instead of Pur Req

Hi Gurus,
There is a variant created for background job of MRP, which is running once in a day. In this varaint, I have control parameters set in such a way in that , it should create purchase requisition ( Purchase requisitions in opening period = 3 ) . But its creating planned order only.
When I am running in foreground, it is generating Pur Req as expected but not generating Pur Req when running in background.
Please help me creating purchase requisitions instead of planned order.
Regards,
Om
Edited by: Om.P.Singh on Nov 24, 2011 5:12 PM

Dear Om.P.Singh,
As per your settings (Setting value 3 for Create Purchase Req paremeter) it will create only planned orders for the externally
procured items.
If you have set the value as 1 then it creates only purchase req's for all the externally procured materials.
If you have set the value as 2,then it creates PR in the opening period(mentioned in the scheduling margin key) and planned
orders for the remaining period.
This parameter setting works only for the externally procured items.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

MRP background job - on hold - ARFC

hi
Off late, the MRP background job scheduled weekly is taking a very long time. more than 4 hours and when i check the status in SM50, it shows the job shows status ON HOLD and reason as ARFC.
In SM66 , i can see the job is STOPPED.
But after a long interval it gets running and the job gets completed after several hours.
Can anyone please help me on this.
Thanks and Regards
Joe

Hi Joe,
Since this job is a weekly job. It's might be the case that the job is processing lot of data. Can you check the job logs in the SM37, exactly what is the error message you are getting.
The probable solution can be restricting the selection to finish the job in very less time.
Rgds,
Ashish

Creation of background job from SE38

hello all...
In the selection screen of my report program, there are two radiobuttons - read mode or update mode.
In read mode, the program reads an excel file and gives the output in teh form of errors, if at all, after some chekcs on this excel file.
In update mode, the program should check the excel file, get an internal table with errors from the excel file as well as run BDC for the correct records in excel file. So the output here has two blocks, first one - errors in excel file, second one - errors in BDC update.
But this update mode should run in background.
HOW TO CALL THE BACKGROUND JOB FROM THIS REPORT PROGRAMME when the update mode is selected??
Advance Thanks
omkar

Hi Vishal,
1. How are u running the BDC ?
2. If u are using call transaction syntax,
   then there is an extension to it.
    MODE mode
(See help F1 on call transaction)
The processing mode can take the following values:
'A' Display screen
'E' Display only if an error occurs
'N' Do not display
'P' Do not display; debugging possible
3. We can use N
4. N means, it won't display any screens
   of that BDC transaction.
5. It does not exactly mean the BACKGROUND JOB
   generated thru sm36.
Regards,
Amit M.
Message was edited by: Amit Mittal

Rule set import - Background job did not run

Hi,
I am setting up my CC 5.2 production system. I have downloaded from ruleset from the dev CC and imported it into production. However the background job generated did not run. I am implementing SAP note 999785 to fix this, but am wondering what should I do about the rule set? Do I need to delete the rule set and reimport it? As this background job did not run I notice that the permission rules did not generate.
Any advice is welcome.
Thanks

Hi,
as the backgorund job never ran and no rules were created, I can just reimport the ruleset and let the job run. I have tried this and the rules were created successfully

VL10B is terminating in background job, no deliveries are generated

VL10B is terminating when running in a background job then no deliveries get generated for STO, is there a way to make the program skip to the next record instead of terminating so some deliveries will be generate?

Hi mohan,
check in material master whether there is any saftey stock / minimum stock is there.. if so. please correct it.
Ramki

How to terminate background job for MRP

Hi dudes,
how to terminate background job set earlier and i want start again with fresh scheduling. as user discontinued using the MRP process.
thanks inadvance for quick response.
Robert.

Robert,
Just though of sharing the alternate way to do this work, instead of DELETE use CHANGE option.
1. Execute transaction SM37 for the program "RMMRP000" and Job name what you have specified with job status "Scheduled" check box activated. Job Overivew screen appears
2. Now select the job in the Job Overivew screen and use Menu bar: Job--->Change or Ctrl+F11. Change Job Screen appears
3. In the change Job screen Hit the function button Start Condition (Green Flag). Start time screen appears.
4. In the Start time screen define your Job schedule and save the time parameters and save change job screen. Now your job is scheduled with new parameters what you have entered.
Regards,
Prasobh

Error in MRP Run- Background Job.

Hi PP Gurus,
I defined scope of planning for two plants and defined counter too. And set background job through Transaction code MDBT taking 24Hrs as Schedule selection parameter.
When I'm accessing MDBT after 24Hrs system is throwing following messages in Scheduling log:
1. Please check the destination for Parallel MRP (message no. MD251)
Diagnosis of Message:
No destination have been entered in Customizing or none of the destinations (application server) entered are active. In Customizing for MRP, you define the logical destinations (servers) to be used for parallel processing.
2. Job cancelled after system exception ERROR_MESSAGE (Message no. 00564)
Though I tried to enter to Customization through Message no. 1 but system is not allowing for it.
What could be the problem. No help is available through any OSS note also.
Please suggest the required solution in terms of Configuration or any other changes?
Thanks & Regards,
Abu Arbab

Hi,
Two more queries:
1. If I don't want to go for Parallel Processing MRP, I don't have to select 'Parallel Processing' in Transaction code MDBT variant. But when I'm trying to change it system is not allowing me. It's not allowing me to go further without selection of it. What could be the reason behind it? Either Customization problem or any other?
2. If set 'Parallel Processing destination' through Customization, system is giving only Development server as available destination and also Customization Request is getting generated. But the request is going to be transported to Production server. Since Parallel Processing destination was selected 'Development server' earlier and now MRP will run on 'Production server', it has to be changed to 'Production server'. But as already mentioned Customization Request will be getting generated and further it is freeze for Customization. How could get rid of these issues?
Please come back with prompt comments.
Thanks & Regards,
Abu Arbab

RESCCC - Generate cost collector as background job.

Hello,
I am trying to generate the cost collector. normally this is a two screen procedure. In the first screen I input the parameters and then execute it.
In the next screen the list of cost collectors appear with the red & white circle icon at the top. When I select the cost collectors and click on the icon, it generates the cost collectors and they are now ready for the next period.
We have a timeout setting of 900 seconds set in our system. As a result any foreground job that runs for more than that leads to a short dump. We cannot change this parameter.
Thats why I was trying to run the report as a background job. When I am running the background job, after a while when I am checking the status of the job I can find that the job has successfully finished.
The problem is that in this case I dont get the second screen from where I could select the cost collectors and then 'generate' them using the red & white circular icon. That screen just doesn,t come at all.
Can someone please tell me that if i run this as a background job then how may I get to the screen (the second screen) from where i can select the cost collectors and generate them?
Regards,
Suvarghya Dutta

Hello,
when RESCCC is run as background job the cost collectors for all specified settlement units should be generated without the need to select them in a second screen.
Please check that you have made the selections for settlement units and also the settlement period start and end date properly for your background job. If it still doesn't work please check the protocol of the background job for messages.
Regards, Franz

Background job not generating spool

Hi all,
I am calling a report from another report. The called report will display the final output list.
Here, the called report will be executed in background.
here the job is completing but the spool is not generated.

Hi,
It seems that the final internal table which has the output data is empty & hence write statements are not executed ( assuming all the write statements are inside a loop).
Place one write statement outside loop like
write :/ 'Following is the result :'.
& check whether spool is generated. If yes, then the problem is of empty internal table.
You can select the job in SM37 & type JDBG in command prompt to debug a background job.
Debug & check the issue.
Best regards,
Prashant

Is there any FM to generate spool request for error log of a background job

Hi,
I am going to create a program to create deliveries and do PGI. This program will be assigned to periodic background job.Now whatever errors are generated in program i have to send the error log to spool request.Is there any FM for generating spool request with this error log or how can this be done? Kindly provide sample code if possible.
Thanks.
Nimish Dongare.

Hi Nimish,
How are you doing, This is Shreekant working as ABAP developer, I sow your post in sdn forum, I have a similar requirement like I am changing the delivery taking some data from a flat file which is coming from other system and do PGI. If any error occurs during this process I need to capture it and present it as a report or create log file.. whichever is easier.
Please can u help me how did u achieved this functionality for your requirement?.. pls. can u share some details.
If u don mind, can u give me ur email id to communicate.
Thanks,
Shreekant

Spool not generated in BAckground Job

Hi,
I am trying to schedule RSNAST00 in a background job. My problem is that when the job gets finished i cannot see a spool for the output, any pointers to this issue will be appreciated.
Regards,
Sharadendu

Go to transaction SM37 and check job log.
It is possible that something is going wrong in your program. I would suggest you to debugg background job.
To debugg just select job in SM37 and in command window(Where we type T codes) type JDBG and press enter. This will open debugger. Press F7 for approx 4-5 times. Now your program will be opened in debugg and you check why spool is not generated.
let me know ig this helps.
Regards,
Jigar Thakkar.

Mails are not generated in background Jobs and not shown in SOST.

Dear All,
I have facing issue regarding to system mails. I want to send mails the various reports automatically from SAP System to different recipients. So I scheduled that reports at background and in their spool list recipient I have added distribution list.
But that mails are not generated, it is not shown in transaction SOST also. When I send mails manually it goes successfully to only our company domain recipients. But not other domains. How should I resolve this problem?
Please help me out.
Thanks in advance.
Amit

Hi Srihari,
I have checked the background jobs they showed it finished. Following logs are shown in job logs. Is problem is due to 3rd log??
18.03.2012 14:23:34 Job started    00           516          S
18.03.2012 14:23:34 Step 001 started (program RFITEMAP, variant PDC FARMAR, user ID DEVELOPER1)      00           550          S
18.03.2012 14:23:37 No items selected (see long text)                                              MSITEM         033          I
18.03.2012 14:23:42 Spool request (number 0000026302) created without immediate output               SY           355          S
18.03.2012 14:23:46 Job finished                                                                     00           517          S
When I saw further details of 3rd log it following message.
No items selected (see long text)
    Message no. MSITEM033
Diagnosis
    No line items meeting your selection criteria could
    be for the following reasons:
    1.) No corresponding items have been posted.
    2.) You are not authorized to display this data.
    3.) The items have already been archived.
Please help me out.
Thanks
Amit

BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

Hello,
To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
If we see the maually the log report for FFID then below error message is displayed.
" BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
Can anyone guide me to solve the issue.
Thanks in advance.
Best Regards,
Prashant Dubey

Hi,
once chk the status of the job by selecting that and check job status(cltr+shift_f12)
since it was periodically scheduled job there will be a RELEASED job after every active job..
so try to copy that into another job using copy option and give some new name which u have to remember...
the moment u copy u can find the same copied job in SCHEDULED status...
from here, try to run it again on hourly basis....
After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
rgds,

Afer background job finished, spool was not generated

hi all
Afer background job finished, spool was not generated but all background jobs is not
soem background jobs was created spool.
even if same user and same backgorund job, sometime generated spool or not.
how can I solve??
thanks

Hi,
Spool will be generated only spool specification wil be defined for that job.
Select the job go to steps spool specification you can see the device assigned to it.
Regards
Ashok

BP Generating - Background Job

Hi @all,
I want to create my business partner by the transaction BG_GEN (automatic business partner generation, depending on the users in the R/3 System).
Everything works fine, the business partners where created and it's perfect.
But I have a question. Can I make this automatically creation with a job? I mean, can i plan a job (for example once a day), which creates business partners? So if we got a new user, thsi user will automatically been created as business partner in our SolMan?
Hope anyone could help me to do this,
thanks in advance
Michael

Hi,
It seems that the final internal table which has the output data is empty & hence write statements are not executed ( assuming all the write statements are inside a loop).
Place one write statement outside loop like
write :/ 'Following is the result :'.
& check whether spool is generated. If yes, then the problem is of empty internal table.
You can select the job in SM37 & type JDBG in command prompt to debug a background job.
Debug & check the issue.
Best regards,
Prashant

MRP background job generating Plnd Ord instead of Pur Req

Similar Messages

Maybe you are looking for