MRP contoller From Remote in PR

Hi,
I got a situation where I'm having STR created in remote with MRP contoller lets say 003 and in base MRP controller is maintained as 001.
But when by o3o_sc01 I'm converting the STR to STO & PR, the PR is capturing the STR MRP contoller 003 not 001.
Can any one hlep to fix this concern
still waiting
Thanks
test
Edited by: Test on Feb 25, 2011 3:08 PM

Hi,
Please check the below IMG setting,
Production --> MRP --> Planning --> MRP Calculation --> Define Planning time fence and Roll Forward Period
And check for your Plant what is the Roll forward period is maintained. If nothing is maintained, please maintain atleast 60- (That is 60 days in the past). And now try to execute the MRP, then convert the Planned order into PR. Then Try it.
Let me know whether this solves your problem or not.
Regards,
R.Loganathan

Similar Messages

The WSDL data cannot be retrieve from remote site

I am a new guy learning web services with NetBeans 5.5 and meet some problem in retrieving wsdl data from remote site.
I create a web service "WSTestServer" at Sun Application Server PE8.2 with real IP, say 111.110.11.10:8888, and there's a class "TestWS" with a method "getWS" to return a String. The server (or machine) name is ultra20. So, by following steps in NetBeans, I can get a wsdl file after generating the web service and it can be viewed at
http://111.110.11.10:8888/WSTestServer/TestWS?WSDL
Then, I create a web service client at the same machine, it is available to test this method by clicking Web Service Reference item in NetBeans and select "getWS" method to get that String.
However, when I create a web service client at remote site, it doesn't work and show exception message like
cannot find domain http://ultra20:8888/WSTestServer/TestWS....
I go back to check wsdl file, at the last line, it prints like
<soap:address location="http://ultra20:8888/WSTestServer/TestWS".....
If I test this case in LAN, e.g., the server IP becomes 192.168.1.2 and client IP is 192.168.1.3, then it works since machine name can be recognized within the same local area network. I try to revise the wsdl file above to replace machine name as real IP, but it is automatically changed back with machine name while deploying and copy the revised one as xxx.wsdl__orig.
Should I do additional configuration setup for server site? Such as, registering a domain name like aaa.bbb.edu instead of 111.110.11.10?
Any comment and help for this subject is appreciated!!
Thank you so much!

Works as designed,from documentation:
The database also retrieves all triggers and constraints defined on the table except for referential integrity constraints that reference other tables.
The retrieved indexes, triggers, and constraints have recycle bin names. Therefore it is advisable to query the USER_RECYCLEBIN view before issuing a FLASHBACK TABLE ... TO BEFORE DROP statement so that you can rename the retrieved triggers and constraints to more usable names.
For details see the FLASHBACK TABLE command description for your unknown database version.
Werner

Unable to allow traffic from remote office - Cisco RV220W

Hi there,
I have just bought the RV220W Cisco router firewall because my DLINK-1600 got broken and now I am unable to allow access to the machines located behind this router from the machines located at a remote office. Any help would be much appreciated!!
This is the situation:
1. Two remote offices A and B connected by a VPN tunnel (this connection is managed by an external provider and it is properly functioning)
2. IP range A office: 192.168.236.0/24
3. IP range B office: 192.168.237.0/24
4. Office A: CISCO RV220W router/firewall (the one that I´ve just bought as the old dlink has broken). This RV220W is connected to a cisco router (managed by provider) that is the one with the VPN tunnel to the other office. The CISCO router does not do NAT. On the other end (Office B) there is another CISCO router managed by the provider.
5. Everything was working smoothly until our old router/firewall got broken and that is when I bought the rv220w. I have set up the CISCO RV220W at office A and the machines can ping the machines located at office B and can browse the internet, i.e., the traffic going out is OK and in that sense everything works smoothly.
6. The problem is that the machines located at office B cannot access the machines located behind the CISCO RV220W and I know it is a problem of the firewall as if I capture traffic coming from office B, I can see that it is dropped by the CISCO RV220W.
7. I have tried to enable an access rule in the firewall to allow traffic from office B (see picture below) but it does not seem to work. In the field, Send to Local Server (DNAT IP) I have entered the WAN IP of my router (you cannot leave it blank) … this rule does not work at all. I think that is not properly configured but I don´t know how to do it.
8. As you see, the problem is that I don´t know how to set up a rule to allow specific traffic coming from the WAN (traffic from remote office – 192.168.237.0/24) to the LAN at office A - 192.168.236.0/24.
In the old router/firewall I just had to create a rule specifying the source interface (WAN) and network (Office B) and the destination interdace (LANOfficeA) and network (Office A). It does not seem that here I can do the same. i mean, you always have to point to a server ip inside the LAN??
I know it has to be a very easy thing to do but at this moment I am completely stuck. If anyone can give me some advice would be great.
Thanks a lot for your help in advanced!
Eva

Hi Eva, the default inbound policy cannot be changed. It will block all inbound traffic. To my knowledge there is not a way around this. Access rules are the only way to 'poke' a hole through the firewall but as you note, it is for a specific host. Values such as .0 and .255 do not work.
-Tom
Please mark answered for helpful posts

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

Challenge: call local ejb from remote ejb on weblogic 9.2

Hi ALL,
How do I call to local ejb from remote ejb object. The jar file is deployed on weblogic server 9.2, if you want get it http://geocities.yahoo.com.br/lindembe/BEAProject.jar and the source code are http://geocities.yahoo.com.br/lindembe/BEAProject.zip. It is a sample app with two ejb that works so good on JBOSS, JOnAS, but BEA Weblogic.....
The complete problem you watch http://forum.java.sun.com/thread.jspa?threadID=768718&messageID=4387570#4387570
or
http://forums.bea.com/bea/message.jspa?messageID=600043148&tstart=0

Your code in SigemFacadeBean should just do:
InitialContext ctx = new InitialContext();
when you lookup the local EJB. (This will work on all app servers. There's no need to put an app-server specific intial context factory in your code.)
Also, you can remove the jndi-name setting for the local ejb from your weblogic-ejb-jar.xml. jndi-name is only applied to remote ejbs.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

How to read file from remote machine

Hello,
Hi, i would like to know how to read text file from remote machine using java source code, any code ?
Thanks very much;
Best regards
Kim

On the server, perform the following steps:
Parse the request and determine the file to serve
Open a FileInputStream to the appropriate file
Obtain a reference to the Servlet OutputStream
Pipe the bytes from the file to the output stream
Flush and close the streamYou might want to call HttpServletResponse.setContentType("application/octet") to indicate to the browser that a file download will be occurring. Do so before getting the reference to the Servlet's OutputStream.
- Saish

HOw to delete files from remote server?

Hi,
I want to delete files from a directory on remote server.
I use the following command to delete on current server:
find $srcdir -mtime +90 -name "COR*.txt" -exec rm -f {} \;
Now, how can I delete files from remote server ?
Thanks!
Yogini

Some possible options:
1. There exists SSH implementation for Windows.
2. You can make a workaround. You can setup share for specific/wanted directory.
Then you can mount it on Linux machine and execute command localy and delete files "localy" in mounted directory.
3. You can setup FTP server on Windows machine and do that remotely via FTP commands.

Load Data from Remote site

Hello every one,
I tried to load the data from remote site to stagging area with DB link, i used append hint and it gave this error, I was just wondering?
ERROR at line 1:
ORA-12840: cannot access a remote table after parallel/insert direct load txnORA-06512: at "JAMES.PKGCONVERSION", line 464
any help please thank you
i am not using all the columns, i am using selec in the insert. Thank you in advance
Message was edited by:
user553284

I had commit after three inserts, I changed commit after each insert, it is working now,
Does that really matter?
Any idea please.
Thank you

Getting error while calling procedure from remote database

When I am trying to call child procedure from remote database I am getting below error:
ORA-02064: distributed operation not supported
ORA-06512: at "NMUSER.NEW_CUST_UPLOAD", line 740
(P.S. on line no 740 I issued "commit;" )
I checked rights,synonym on all the objects they are fine.

Oracle Error: ORA-02064
Error Description:
Distributed operation
not supported
Error Cause:
One of the following
unsupported operations was attempted:
1. array execute of a remote update with a subquery that references a dblink,
or
2. an update of a long column with bind variable and an update of a second
column with a subquery that both references a dblink and a bind variable, or
3. a commit is issued in a coordinated session from an RPC procedure call
with OUT parameters or function call.
Cheers,
Manik.

Running LV application from remote panel which measures FP through different LAN

My LabVIEW application is running in a PC and it takes measurements from the FieldPoint modules which are connected via the FP-1601 network module.
I want to view and execute the application from another PC using remote panel option. The master PC has two LAN connections, one seperate connection for the FieldPoint module and the second one to connect with other PCs.
But the application returns error while initializing the FP modules when executed from remote panel.
Will the application be able to communicate and take measurements from the FieldPoint module in this case? Please explain.
Thanks for the help and awaiting earlier response.
Thank you,
Rajeswari

In principle this I believe this is a TCP/IP routing issue.
If your fieldpoint unit is connected to one card lets say
Card 01 Host 10.0.0.1 255.255.255.0 ---- Fieldpoint 10.0.0.2 255.255.255.0
Card 02 Host 168.95.0.1 255.255.0.0 ---- Lan 168.95.x.x 255.255.0.0
The routing in the host takes care of which card is used for which network segment.
My guess is that you have not seperated the network segments as shown above.
Is this correct ?

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Reading .txt file from remote using abap?

Hi,
I must read a .txt file from remote server automatically.
I have path and name of .txt file. Remote system asks username and password.
In abap is it possible to give username and password for reading .txt from remote server?
Remote server and sap server are not in same domain.
How can i do that?
Thanks.

Hi Cemil ,
You can try using the FM RZL_READ_FILE_REMOTE_SH.
This is an option i found , but i have really not tried it out .
Regadrs
Arun

Install EBS on local disk from remote win 2003? Can't pass file space check

I have a portable 250G hard disk on my poor performance win xp,I want to install EBS 12 on my portable hard disk,but I xp system's performance is poor,so I connect to a fine performance win 2003 through mstsc and I can access my 250G hard disk from remote computer win 2003;
But when I indecate to use remote hard disk "\\tsclient\M\ebs" as my base directory,I meet some err log like below:
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = \\tsclient\M\ebs\db\tech_st\10.2.0
required = 3280.0
actual = 0.0
If I choose local disk as my base directory ,It pass the file space check;
Can anyone meet such problem? Please help me ,thanks in advance!

Instead of using "\\tsclient\M\ebs\db\tech_st\10.2.0" as a directory path, map this network drive as any other free drive (i.e. F:\, G:\ .. etc). You should be able to proceed with the installation then.
If you need more details about mapping network drive, please refer to:
Windows XP: Mapping a network drive
http://www.microsoft.com/windowsxp/using/networking/maintain/mapdrive.mspx

Select LONG column from Remote table

Hi to all.
I have the following problem: I can't select a LONG column from remote database, when there are Join operation in the query. Example:
SELECT long_column FROM remote_table@DB
-> that's OK, but:
SELECT long_column FROM remote_table@DB INNER JOIN remote_table2@DB ON ...
-> returns: "ORA-00997: Illegal use of LONG datatype"
I cannot even perform (because there a LONG column in the joined table):
SELECT nonlong_column FROM remote_table@DB INNER JOIN remote_table2@DB ON ...
That's very strange to me because:
SELECT long_column FROM local_table INNER JOIN local_table2 ON ...
-> is OK!
Can someone help me to SELECT a long column from remote in SELECT query with JOIN clause!
Thanks a lot!

Hi
"Distributed queries are currently subject to the restriction that all tables locked by a FOR UPDATE clause and all tables with LONG columns selected by the query must be located on the same database. " by otn docs.
I have no idea.
Ott Karesz
http://www.trendo-kft.hu

Error trying to publish (real time) to delivery: No response from remote execute trying to save assettype [error was -103].

Hi all,
I'm trying to publish for first time to a new environment (delivery).
The light of target destination is green.
When i click on "inicialize" i get these errors and in the docs i cannot find why or what i have to do.
Trying to publish asset types during inicialization it returns this error:
No response from remote execute trying to save assettype [error was -103].
Looking for the meaning for this i found: No table. What does it mean? Why the tool has not created the table?
And then, the next error message is shown (all of them are shown in the same screenshot) trying to mirroring. It might have to do with the previos error message... but i have no idea!
-12011. No response from remote execute trying to save assettype [error was -103]
sites.log in delivery environment says as follows
[2014-01-24 12:13:52,496 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SiteCatalog with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
[2014-01-24 12:13:52,527 CET] [ERROR] [.kernel.Default (self-tuning)'] [com.fatwire.logging.cs] ContentServer exception running CS recursively
COM.FutureTense.Common.ContentServerException: pagename not supplied Error code:BAD PARAMETER
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Error accessing the external page with pmd: page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.request] COM.FutureTense.Common.ContentServerException: ContentServerException: (Reading page page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo from co-resident Content Server failed (errno=0).) Error code:GENERIC SERVER ERROR
[2014-01-24 12:14:06,021 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SystemInfo with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
Does anybody know how to help here?
Thank you very much.
Gala

What SQL server driver are you using, Microsoft's or the jTDS driver (see jTDS JDBC Driver)? It may be worth trying the other.
Also, can you enable
com.fatwire.logging.cs=DEBUG
in log4j.properties and retest, then post the entire resulting sites.log and application server log somewhere for us to see? e.g somewhere like pastebin.com
Phil

MRP contoller From Remote in PR

Similar Messages

Maybe you are looking for