MRP for product code that is a FG as well as a CoProduct

Hi,
My client has two ways of producing stock for a finished good code "B".
a) As a coproduct of another FG (lets's call it product code "A").
b) As a specific production of the product "B" using a specific BOM and Routing.
My question is: will the MRP planning run take in consideration,when generating the planned orders for producton of "B", the dependent requirements (as a coproduct) generated by the planned orders for product "A"?
How can I prevent the risk of "excedent stock" for B?
Thank you for your answers
Best regards
Carlos Gonçalves

Hi,
I think it considers the requirement. Sorry you don't require to adjust manually system will take care of the same.
I will give example
Stock                                           - 0
Dependenet requirement From A - 1000 +
LSF                                              - 2000 -
Planned order                              - 1000 +
You just give the demand of B it automatically adjust the requirement considering the receipt from 'A'. As this will be the receipt just like ur Production order or purchase order. Try this scenario in your test system and check the MD04 for co-product system adjust the planned order qty. Hope this clear you.
Regards
Ramakant

Similar Messages

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

E75 Firmware for Product Code 0577045

Any idea when the new firmware 201.12.01 is out for E75, product code 0577045?

Can anyone tell me when will v21.006 firmware are going to be available for product code 0588656
Looks very much like you are stuck with the firmware you have .
You could take the phone to a Nokia Care Centre and see if they can help .
jje

New firmware for product code 0588656

Can anyone tell me when will v21.006 firmware are going to be available for product code 0588656

Can anyone tell me when will v21.006 firmware are going to be available for product code 0588656
Looks very much like you are stuck with the firmware you have .
You could take the phone to a Nokia Care Centre and see if they can help .
jje

TS1702 How do I get a refund for an app that did not work/deliver well at all?

How do I get a refund for an app that did not work/deliver well at all?

You may not get a refund, but you can try contacting itunes support and asking.
Click Support at the top of the page, then click the link under Contact Apple Support.

I have a product code for my photoshop c6 under a different account that i cant remember. how can i use my software with the product code that i have with the new user i made?

I have a product code for my photoshop c6 and i used a different account to register this software. how can i use this product that i have with my new account that i just made?
please advise
I dont have the serial number so yeah
i have a product code

Contact Adobe Customer Service directly by phone or web chat (they don't do email). They don't do email. If you can provide proof of purchase to their satisfaction, they may be able to help you.
These are user forums, so you're not addressing Adobe here. We can't help you with this type of issue.

Can't install beyond request for product code

I am sure it has been covered before but I do not find the answer. I am trying to load WinTen from .iso. Although instructions say we do not need a product code, I can not progress beyond the screen asking for one. If I leave it blank
I can not effect the <Next> key. If I insert anything, including the key for recovery, I am informed that the key does match. What now?

I am sure it has been covered before but I do not find the answer. I am trying to load WinTen from .iso. Although instructions say we do not need a product code, I can not progress beyond the screen asking for one. If I leave it
blank I can not effect the <Next> key. If I insert anything, including the key for recovery, I am informed that the key does match. What now?
My reply is lengthy, I am afraid. Please bear with me.......
1. MS is holding a big event to day at 9a.m Pacific time. It is possible that a new build of Windows 10 TP is going to be released, or even a Consumer Preview.
So, you might want to find out what is being said in the event first.
2. You are right. product key is not needed when one installs the Windows 10 TP.
That said, here are the generic product keys for Enterprise version and non-Enterprise version.......
Enterprise version : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Non-Enterprise version : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
3. Permit me to start from scratch regarding installing Win 10 TP.
It is strongly suggested that you either install it in a virtual machine or dual booting with your existing OS.
Please use the following download links to download the ISO file > then burn it to a bootable DVD and use the DVD to do a clean install.
Enterprise direct download link:
Windows
10 Enterprise build 9879 64-bit ISO image
Windows
10 Enterprise build 9879 32-bit ISO image
Non-enterprise download link :
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10
How to burn iso to a bootable dvd:
There are more than one program doing the same job. I personally use Windows USB/DVD Download Tool. It is easiest.
http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

HT4007 Migrated Aperture 3 from old Mac to new Mac - it will not Register correctly, and asks for product codes when started

I've migrated software from my old Macbook Pro to my New Macbook Pro Retina and the process went ok, except for Aperture 3, It asks for the product codes when started, after 5 starts it asks for Registration details, which I've completed, but on the next start it asks for the product codes again - it is still working correctly on the orginal machine, and shows it is Licensed to me etc - but on the new Mac there is no License information - I should be able to run the software on both machines - anyone any ideas - I've got the original Aperture 2/3 discs so I can install from scratch, but that seems to defeat the whole process of Migration Assitant -

Hi Guys - looking through other threads I've used the method suggested by Frank Caggiano on Dec16 2011 - it worked a treat - thanks Frank

E71 - No firmware updates for product code 0569116...

I'v had an E71 for three months already. In this time two firmware updates have been released for the E71 (in general) but not for my specific product code. It cannot be a regional thing as other E71's in same region as me have gotten the most recent updates.
Also, network operator says it is not with them but that firmware needs to be released by Nokia.
This makes me very unhappy. Had the N73 before and frequently got the firmware updates.
Solved!
Go to Solution.

Thanks Mbamg
Thats how I understand the process to work as well, but it seems this is not the view of the operator (Vodacom, btw also South African)
According to this post in another forum http://mybroadband.co.za/vb/showthread.php?t=153716&page=3
Vodacom phones are not being updated but MTN phones are, though from what is written, it seems that Nokia themselves are unsure, first stating the firmware is only for european models, though unable to comment on why other South African model (MTN ones) are in fact being updated. At the very least, it seems that there is no version for Vodacom to test/release yet.

I have 2 iphones,a iphone5 and an iphone 4s,before upgrading to ios8,i used to receive i messges on both devices,however now i can't because it asks me for a code that i can't get.By the way my iphone 4s has no sim...can i fix this?never had a proble

I have 2 iphones,one with a sim card installed and one without.Before I upgraded to ios 8 I received Imessages on both,however this is no longer possible because it asks me for a code for forward text messaging that I am unable to get.I HAVE THE SAME APPLE ID ON BOTH.Can this be fixed?

Hi mopster555,
Thanks for the question. If I understand correctly, you are not receiving messages on two iOS devices. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Troubleshooting Messages - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Belle Update for Product Code : 0599255

I have been waiting for this update for almost a year now and now when it is finally rolled out... it says no update available for my nokia n8..
Can anyone help me or comment on this........
thanks
software version : 025.007
product code - 0599255
type - RM-596
==============================
Now the wierd part... i formatted my phone with the settings-phone management-delete data and restore option........ and then searched for the software update again.... and this time it showed me an phone update available and asked me to connect via USB.... but when the ovi Suite/ Nokia Suite searches for an update.... all it gets is Galaxy and Real Golf.....
I need Symbian Belle and not those games.....
Can anyone help....

Hi! Your question has been raised already a couple of times by other users as well. Here's more info: /t5/Software-Updates/Nokia-Belle-availability-information/td-p/1298583
BR,
yvonne

Office for mac asking for product code

I just upgraded to lion 10.8.2, when I open office for mac 2011 it is asking me for a product code, I have no idea where to find it, have never had this come up with prior updates. I have office 2011 but dont know where the discs are or even if i downloaded it

Microsoft should be able to help you but I believe a key is just about as expensive as the retail package. You might want to try MS Support and see if you qualify for a discount. Worked for me with my XP Cd.

MRP for production version.

Hello all.
Is it possible what MRP does the selection of the production version for the semi-finishings depending on the version of production of the finished product?
Example:
If I plan the Finished Product 1 in the version of production "0001", does the mrp create the order drifted for the Semi-finishing 1 in the version of production "0001"
however if I plan the Finished Product 1 in the version of production "0002", does the mrp create the order drifted for the Semi-finishing 1 in the version of production "0002"
That is possible?
Regards
Santos

Hi,
You can select the production manually when you are creating a production order.
You can maintain this setting in the order type dependent parameters (OPL8).
If you want the selection to be automatic, if both the prod versions are of different lot-sizez (no-overlapping) then this can be done.
If you want to select 0001 for both finished & semi-finished, In the production version if the lot-size for prod version 0001 is 1 to 100 & if the order quantity is 50 then 0001 prod version will be selected.
For 0002 if the lot-size is different 101 to 200 then for order qty of 150 prod version 0002 is selected.
Regards,
Senthilkumar

Language packs for product codes

Hi,
Is there a list of all available language packs and the languages they include?
For example:
EURO1: English, French, German, Italian, Spanish, Portuguese
EURO2: English, French, German, Turkish, Dutch, Italian
EURO2: English, Czech, Slovakian, German, Polish, Hungarian
Scandinavia: English, Finnish, Swedish, Norwegian, Icelandic, Danish
etc...
I've looked everywhere and couldn't find a cumulative list of all packs, so if someone could write or provide a link if that was already written somewhere, that would be highly appreciated.
Solved!
Go to Solution.

Not really, because Nokia doesn't make this information public, so whatever might exist on the internet are little more than leaks of information which can't be relied upon to be entirely correct; or lists compiled by groups of users which can't be relied upon to be complete.
Message Edited by mccbleue on 14-Sep-2009 05:30 PM

Belle Refresh (111.140) for product code 059H136

Hey everybody.
Is anyone able to tell me if Belle Refresh was halted from distribution? i am not able to download it via Nokia Suite or OTA and i am curious what gives. i have Belle v. 111.130 on the phone now and wonder if i missed my chance, or if i might have to flash it on my own.
Thanks,
matthew
ματθαίος
E72-2 (071.004)
N8-00 (111.140.1508)
E6-00 (25.007)

111.130.622 is latest for RM-609_NAM_US_CV_VAR211038_Black_Belle _V1 (059H136)
Happy to have helped forum in a small way with a Support Ratio = 37.0

MRP for product code that is a FG as well as a CoProduct

Similar Messages

Maybe you are looking for