MRP for Service Order

Hi Friends,
My client want to run the MRP according to Material Group and according to service order.What are the possible ways to run the MRP? How my problem can be resolved?Please reply...
Regards,

Hi Edit,
The question is not to run MRP for Service materials, - to run MRP for the Materials in a Service Order.
I have one service order in which I have raised requirement for 10 materials (eg. Raw materials).
MRP can be run Plant wise or Material wise.If I run Plant wise MRP, system will gather all the requirement that are required in the plant (including Sales order, Service order, Prod order etc..).
If I run the MRP Material wise, system will gather the requirement of that material in all types of orders.
But the requirement is to run the MRP only for a particular Service order (only for the materials and quantities required in the given Service order) and generate PR and PO for procurement. The material may also be required for another service order, sales order or prod order. MRP should not gather the requirement for other orders.
Hope my explanation is clear. Prasanna, please post the correct scenario if there are any deviation in my understanding of your query.
I am also Looking for the solution. If any one have idea please help us to solve the issue.
Thanks,
Babu.K

Similar Messages

Settlement Rule for service order created based on sales order

Hello,
I am creating a sales order and entering WBS as an cost object.
After creation of sales order the Service order is created.
For service order type in the settlement profile WBS is maintained.
But the system is not copying the WBS in Service order which is maintained in sales order.
Can any body have an idea on this?
Regards
Abhijit

Hi,
As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
Not what you maintained in account assignment tab of sales order
When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
Kapil

Pricing date for Service Order and Service Confirmation

Hi,
I cretated a Service Confirmation as followup for Service Order.
Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
I need to check T&C field and Zone field. But, I am not seeing these fields also.
Can you please let me know, where can I find this fields. (In which assignment block).
Thanks,
Sandeep
Edited by: Sandeep Reddy on May 31, 2010 7:21 PM

Hi,
I think by PRICING DATE they mean BILLING DATE.
In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
This is one strategy you can use.
Regards
Surendra More

BAPI for Service order creation

Hi ,
Please tell me if any Bapi for service order creation , T-code : IW31
regards,
Prakash

Hi Prakash,
Have a look on the following BAPIs:
BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
Hope this will help.
Regards,
Nitin.

FM for Service Order

hi,
require a FM for Service order Details IW73.
cheers,
Aditya.

Did you try BAPI_ALM_ORDER_GET_DETAIL?
Regards,
Ravi
Note : Please mark all the helpful answers

Using MD50 to run MRP for Sale Order

Dear all,
I have some problem when using MD50 with Mill Product Industry.
When SAP system not activate Mill Product yet. I used transaction code MD50 to run MRP for Sale Order, the system have generated planned order for multilevel. But when SAP system have activated Mill Product, I used transaction code MD50 to run MRP for Sale Order, the system only generate planned order for single level. I think that we have to configure something based on Mill Product Industry. So can you help me for this
Thanks, Regards

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

Plan Assessment and Allocation for Service Orders (CS)

Hello,
I'm trying to run plan assessment (KSUB) and plan allocation (KO9E) for a service order (created via IW31), but I'm not able to do it.
I can do assessments (KSU5) and allocations (KO8G) with real values, but since I'm not able to do it in plan mode, I can't have comparative values between real and planned values (no value is flowing to allocation secondary cost elements).
Can anyone let me know if this is some sort of limitation for Service Orders? Because I checked SPRO in transaction code KOAI and for this type of orders there is no Indicator for Integrated Planning, nor it's possible to assign a planning profile.
Many thanks for any help you can provide!
Regards,
Cátia

I created a SAP message and they confirmed that this is not possible.

WBS Settlement rule control for service orders

Hello,
We have an requirement to implement validation point for service order settlement rule. Currently there is no validation check of settlment rule for service order. So that the settlement is happend to incorrect receivers in service orders.
For example :
Service order created for company code - 400 and the settlement rule receiver should be WBS which is belongs to same company code but some case , user are maintained wrong WBS in settlement rule which belongs to some other company code.
Can you please hlep us on this requirement and suggest any enhencement point avalible on the same.
Thanks
Risha

Hi,
Please go to okg2,
Calculate wip or result analysis
remove the tick for Order In Engineer to Order Production
Now run result analysis and check whether settlement will not happen for cross company code.
please check this and revert back.
Thanking you
Vengaiah Chowdary

Default settlement rule with settlement type as FUL for service orders

Hi Folks,
Could you please advise me on the below issue?
Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
We have applied the below notes:
Note 313454 - Info: Default value for settlement type
Note 851975 - Settlement use automatic generation creates
Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201D

I was also with this problem in 2013 january and only found some information about this, here.
Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
This note was released at 09.06.2014

BAPI for Service Orders Confirmation

Can somebody please provide BAPIS for Service Orders Confirmation and other related BAPIS
Thank you

To create service confirm order use "BAPI_BUSPROCESSND_CREATEMULTI".
Regards,
Animesh

Freight for service order

Hi
Even though freight condition is maintained in the service order, while doing MIRO it is not picking.The service entry sheet is created & accepted.
Regards,
Kumar

Hi,
Why & how freight will come into picture of service procurement ieu2026.For service order.
If you are procuring material, of course you will have freight charge as material need to be carried out physically from vendor place to your company premises but service charge is just like a slab (_service is an activity_, intangible material & as services cannot be stored, does not contain any inventory data) where it may involve of service tax with service base amount. You may need to be re-mapped your business process.
More check link:
Account determination for MIGO/MIRO
Regards,
Biju K

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

Stage wise payment for Service orders

Hi techies,
stage wise payment for Service orders. Following items are required in SAP while creating & releasing Service Entry. Matter has detailed by following example:
Stage wise payments for an item for eg: Rate is Rs 100 per Rmt.
Item shall be certified as 100% and released stage wise.
Say 60% release on deployment of machinery
Another 20% on execution of work
Another 10% on submission of final bill
Balance 10% as Retention Amount.
Please provide me the solution for release of part rate as explained above.
Thanks in advance,
NB

You,can use Invoice Plan....
In order to work with an invoicing plan according to ur requirement you mentioned, you must maintain the following settings (among others) in
Customizing:
Desired invoicing plan type
Date categories
Date descriptions
Date proposals
You can also specify whether the invoicing dates are to be entered/maintained manually or whether the system is to suggest them.
You can do settings here:
SPRO ---> MM --> Purchasing --> PO --> Invoicing plan --> see here all the settings...
Regards,
eswarmanu...

How to generate Billing for Service Order ?

how to generate Billing for Service Order ?

Hello,
You may do a resource related billing from the service order, but you need to maintain Resource Related billing profile in Service order --> Control tab. Once it is set you may generate the billing document (debit memo) from service order through DP90, provided the config is right.
Prase

Object Type (OBJTYPE ) for Service Order & Billing

Hi,
I am developing a report for billed service orders . I wanted to know what is the
OBJTYPE for billing.
In the CRM_ORDER_READ function module we can see
OBJTYPE = BUS2000117 ( For Service Confirmation)
OBJTYPE = BUS2000116 ( For Service Order)
How my report will fetch only those service order details which are billed ?
Is there any common key ?
I am using extracxtors in BW:
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Regards
PK

OK, next step could be to have a look to see if Plant is checked (I think it might be) and if you so could create roles on groups of plants which represent each Sales area. It's not perfect but short of changing the code (you could speak to an ABAPer to see if there is a user exit or enhancement point they could use) you could reduce some of your risk this way

MRP for Service Order

Similar Messages

Maybe you are looking for