MRP - Forecast date not loaded

Hi experts,
In planning production we use a program to generate forecast for one year (weekly period basis). This program uses the BAPI_REQUIREMENTS_CREATE function. We are trying to plan this year to febrery until december and we loaded the requirement schedule data, but as a result, we get schedule planning since may until december only.
I tried testing through SE37 the BAPI_REQUIREMENTS_CREATE function, but the problem persist, so I have thought there is a problem at customizing, but I have not found where.
I appreciate any idea to help me resolve this issue.
Best regards
José

In my system it's creating without any problem, I would suggest you to check the following
1. When you run it in SE37 (I ran it with period indicator = 3 (month, check your indicator)), see if you got the success message for the number of entries in the table RESULT is same as REQUIREMENTS_SCHEDULE_IN
REQUIREMENTS_SCHEDULE_IN           11 Entries
                 Result:           11 Entries
REQUIREMENTS_CHAR_IN               0 Entries
                 Result:           0 Entries
RETURN                             0 Entries
                 Result:           0 Entries
In MD63 check the planning horizon range you're giving to view the table values.
Also see if you're looking at the right version you gave in the SE37

Similar Messages

Data not loading from R/3 to BW

Hello
I am a new user in SAP BW, but i am quite familiar with it now. I am trying to load or extract data from the SAP r/3 system to the BW system. When i check the value of my extractor in rsa3 , i can see the records. But when i try to load into the cube in BW , it shows in my monitor " Not yet completed/warning" and "0 from 0 records" . My status is yellow in my details tab(though "REquests" message is green) I am using BW 3.x. It remains like that for a day and then the status changes to red without the data being loaded.
Can anyone help me out with this? I tried a lot of things, but still not able to find a solutions to this?

Hello
Well i know it doesnot even come to the PSA.. ! because I had tried that earlier, it still says the same.
I had tried activating also again , but with no success
The error message in the "Status" Tab is as follows
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Error messages in the "details" tab is as follows.
->Overall Status:Missing Messages or Warning
   -->Requests (messages):Everything OK (green)
   -->Data Request Arranged(green)
   -->confirmed with :Ok (green)
-> Extaction (messages) missing messages
   -->Missing Messages: Request Received (yellow)
   -->Missing Messages: Number of sent records(yellow)
   -->Missing Messages:Selection completed(yellow)
->Transfer (IDocs and TRFC): Missing messages(yellow)
->Processing (DataPacket): no DAta(yelloW)
These were the errors
Hope this would help in finding a solution.
Thanks and Regards,
Justin

Data Not loaded from ap_invoice_lines_interface to the base table

Hi ,
Please I'm working on Interface which load invoices from Cobol system to oracle , anyway procedure is working on fine & all data is loaded to the interface as i'm inserting 4 attributes which is DFF on the invoice line level
Now when i ran the import program all data is loaded to the base table except one of the attributes isnot loaded .
will anyone tell me what is the reason or how can i trace that ..........
Thanks In Advance

Dear All ,,,,
Please i got it's a matter of size of the attribute1 segment i increased it ,,,,,,,,,but now the issue that data is saved in the base table but not showing in the screen
will you please help me in that
Edited by: miro_feps on May 21, 2012 1:01 AM

Need more Info about "Load transactional data when master data not loaded"

Hi,
Can you please explain me this option in the infopackage " Load transactional data when master data is not loaded"....
Say i load a transactional data record which has a material no. AAAXX.
In the fact table, the material no. is replaced with the corresp. DIM ID.
Now, assume that there is no entry for this Material no.
AAAXX in the master data table...so no DIM ID for it..
How is it then stored in the fact table ?
Hope i have managed to explain the scenario..
Thanks in advance,
Punkuj

Hello Punkuj K,
How r u ?
No, if the entry for that Material Number "AAAXX" is not there in the Master Data then it will create a SIDs & DIMs ID for that & Transaction Data will be loaded.
Use
Choose this indicator if you want to always update the data, even if no master data for the navigation attributes of the loaded records exists. The master data is generated from the loaded transaction data. The system draws SIDs. You can subsequently load the master data.
Dependencies
The texts, attributes, and hierarchies are not recognized by the system. Load the texts / attributes / hierarchies for the corresponding InfoObjects separately.
This function corresponds to the update. Possible errors when reading the master data into the update rules are not associated with this indicator.
Recommendation
We recommended loading the master data into the productive systems in advance. Select this indicator especially in test systems.
Best Regards....
Sankar Kumar
+91 98403 47141

Audio data not loading with certain clips. Premiere Pro CC 2014, using .mts files

When I open a project, sometimes a clip will not load its audio data. In the photo I've attached, you can see the video clip on the right has the waveforms showing up, but not for the clip on the left. Rendering does nothing, I've tried clearing Premiere's cache, and I've signed out and back into Creative Cloud as I saw in another forum post with no success...any suggestions?

Right clicking, and selecting "make offline" then re-linking the media seems to work. Thanks! Just weird how this happens sporadically with different clips in different projects when I open them.

Timesheet data not loaded in ESS Record worktime

Dear All,
we had our timesheet in ESS up and running since sometime now. Recently we had a patch upgrade for ESS, after which the worklist for the timesheet is not getting loaded for many users. The data is loaded properly few times and No data is loaded other times. The data gets loaded in the worklist correctly when i debug the programs CATS_EXTERNAL_WORKLIST and LCATSFZC for a user whose timesheet didnot get loaded correctly in the first place
we are using Cprojects for booking timesheets. I had checked the valid worklist projects for the user using the below program and data is loaded correctly.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=61926
The timesheet worklist is correctly loaded in CAT2 screen.
Please suggest me how to resolve this issue? Thanks in advance,
we have done the below upgrades recently after which issue has started.
SAP_HR support pack 69 to 75
EA_HR support pack 21 to 26
SAP GWFND support pack 4 to 8
SAP_UI support pack 4 to 11.
Regards,
Paval.

Hi,
I think there are a few tasks that you can try to solve your problem (if you haven't already)
- First you will have to repeat the personalisation steps that you performed (on the initial portal i-view screen) in the the review screen to get the fields to display on this screen.
- to get the fields to update you will need to add them to the view V_T588MFPROPC or possibly V_T588MFPROPS though this table should be for SAP namespace
- You may need to check your code in the INPUT_CONVERSION method of the BAdI
Hope this helps
Andrew

IFrame data not loading on iPad

Hi,
I am having trouble figuring out why images are not loading in my iFrame when the web page is loaded on an iPad or iPhone....
http://www.1504westminster.com/photo1.htm
The content is simply text and images. It just partially loads. Works well on all other browsers, and Safari online (although, Safari does not resize the iFrame - bummer).
Thanks,
Arnold
Message was edited by: PopeBelboz

Alright,,, I figured out the problem...
The images were being resized from larger files, so the web page still had to load the large images.
It ended up maxing the memory on the iPhone or iPad. Thus, the images wouldn't load.
I had to resize, and now it works fine.
Moral of the story - iPad and iPhone can't load the usual large amounts of information.......

Data not loading from R/3

Hi all;
we are in BW3.5, and is having some issue that not able to load any data from R/3 side. I tried to create many datasource and cube, but when I load the data into the cube nothing is happening...and after long time it turns it to red. transfer records and added records are both Zeros. On the error details: I created some flat files for testing..and it loaded fine.
under the details tab of the monitor scheduler > got error msg saying 'Request IDoc: Application document not posted'.
No short dump occurs.
Anyideas..what to do?
Krishma.

Hello krishma,
check out if all the steps mentioned in this doc have been carried out related to R/3-Bw conncetivity.
https://media.sdn.sap.com/html/submitted_docs/Best_Practices/BW/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
thanks and hope this helps..

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Data not loading to cube

I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
The load I am making is full repair
Can someone assist
Thanks

Hi Akreddy
I am not sure "Repair full to Cube"...!
Still the following is my opninon abt your issue...
It seems there is some miss map ..Just one quick check in the DTP monitor in which step your getting 0 records . Is it Data package level or transformation level or routine level..
Identify the step where the transfered records is nullifying then dig through the step..or post the waning or message in this forum so that its pretty easier to get answered..
Hope its clear a little..!
Thanks
K M R
"Impossible Means I 'M Possible"
Winners Don't Do Different things,They Do things Differently...!.
>
akreddy wrote:
> I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
>
> Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
>
> The load I am making is full repair
>
> Can someone assist
>
> Thanks
Edited by: K M R on Aug 16, 2010 2:01 PM

Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

Data not loaded to cube from DSO

I activated the standard RPM Financial Planning cube 0RPM_C05. When I do the data loads (not DTP) data requests are sent to DSO. Request status is success and data is active and is available for reporting. However these two DSO are mapped to Info cube (standard content) and I dont see data there.
I don't see any errors in the monitor.
Data sources - 3.x
DSO - 0RPM_DS07 and 0RPM_DS08
Cube - 0RPM_C05
Thank you,
Vasu
Edited by: Subramanya Srinivas Mullapudi on Mar 4, 2010 8:44 AM

Hi Raja,
Thanks.
The problem is though the update automatically option is set, the data is not getting loaded.
I used the manual update 3.x data to targets now and it worked. I see the data in the cube.
But how to set this in Process chains. Is this (update 3.x data to targets) the same as Update DSO Data (further update) process type?

FDM Excel Import Issue - Data not loading.

I cannot get an excel mappping table to load to FDM. I am working on the Entiy dimension. I noticed a few things when trying to trouble shoot this. If you delete a record, the excel file will load that one entity back to the mapping table with the changes from the excel file. Also, if I delete the table and load a new mapping table with excel it will add the first record. The only thing that changes on the new load is the data key. I could not find anything in the Oracle forum on this.
When you manually load this data you do not add the sequence number, which seems to be always zero , the data key, which seems to be incrementing itself some how(but not sequentially) , and the partion key and dimname , which appear to not change. I was assuming that the issue was in the way I was adding this other data. I am obviiously new to FDM, so any help would be much appreciated. Thanks!

I am facing similar issue.
I am trying to map ICP Entries using an excel file.
I have made 2 mapping (explicit) entries, manually and exported it in Excel and then added all the Mappings in the same file, in proper format. when I am importing, I am not getting any error but the mapping is not getting updated and the new entries are also not getting added. so Ideally no Change in the tDatamap table.
Environment details: FDM Version 11.1.1.3 is getting used. Target App is Essbase 11.1.1.3. able to connect to Essbase, no issues with connectivity.
Has anyone face this issue.

Data not loading in Development system( Urgent)

Dear SDNs,
Am loading data in development system... The message in status tab is Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tried to reload the data but am getting the same kind of error message...
I checked out whether the source system connection is OK or not... While am checking the source system connection I got an error message like as follows
BW unknown in source system
The BW IDoc type ZSIA035 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found
Wat kind of action does we follow in this situation...
Kindly Advice me...
Answering getz appreciated...
Warm Regards,
Aluri

Hi Aluri,
I do faced the same problem before....
Is RFC connections and Partner Profiles are done properly between BW system and R/3 systems.........
If it has done properly....... Try to Activate the R/3 source system at BW side...
Still if you are getting the same error..
Right click on R/3 Source system at BW -> select Resore....
It will ask you RFCUSER passward for BW adn R/3
After doing it also still if you get the errors ...
Try to configure the all these steps....
Step 1: Create a Logical System at BW and R/3 side using t-code SALE
Step 2: Create the RFC Connection between BW to R/3 and R/3 to BW using the SM59 and Do the Test Connection and Remote login
Step 3: Create the Port Number for IDOC processing at R/3 and BW sides using WE21
Step4 : Create the Partner Profiles at R/3 and BW sides using the WE20
Specify the Inbound and Outbound parameters at R/3 and BW
For to know message types follow the link.....
http://wiki.ittoolbox.com/index.php/HOWTO:Re-Connect_R/3_and_BW
Check this Link also...
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/content.htm
After doing all these things now come to BW
Create R/3 Source System at AWB....
Hope it Helps...
Regards,
Kiran Telkar
* Assign points if it helps your requirement * *

Data not loading /updating into cube 0lc_c03

Dear Friends,
I extracted data for three data sources i.e. 2lis_03_bx,
2lis_03_bf,2lis_03_um i got data in BW PSA with out any
error but that data is not updating in cube 0lc_c03
i have done settings at r/3 at t.code mcnb,SBIW and I had make NDI flag active at t.code FIBF. do i need to right.
at SBIW I have done like this settings: Inventory controlling
1,Determine Industry sector I have selected Standard (core).
2,Transaction key maintenance for SAP BW I have selected application MM and operat all i.e. 0,1,2,3,4,5,6........all of MM and saved
3,Then stock initialization.
and deleted setup table data for inventory controlling
and after assigning keys I again loaded setuptable.
I am geting data in r/3 rsa3 and in BW PSA with out errors for all three data sources but not geting in cube
but at data source 2lis_03_um update rules there are few key figures with out green light i.e. 'x' but update rules are active please guide me do ineed to write
any update rule level routines please guide me.
please guide me how to get data into cube.
Thanks in Advances
rafeeq ahmed


Hi rafeeq,
Are you using business content update rules or custom.
check each rule seperately. do a simulation on the data load, if you feel the update rules are correct.
Check if your validity table is maintained.
hope it helps.
kris

MRP - Forecast date not loaded

Similar Messages

Maybe you are looking for