MRP Forecast - Formatted search

Hi all experts.
I have created a UDF on the forecast report in SAP. Here I would like to list Alternative Items connected to the item number on each row. I have the following formatted search query:
SELECT T1.[AltItem] FROM OITM T0 INNER JOIN OALI T1 ON T0.ItemCode = T1.OrigItem
where t0.itemcode = $[ORCM.itemcode]
This works fine when I trigger it with SHIFT+F2. But I would very much like this field to get data when I execute the report. I don't want it to be a manual task to trigger the query. I have tried setting this up by using standard settings of automatic update in the formatted search - but it will not fire the query.
Any suggestions?
Best regards, Runar Wigestrand.

Dear Runar,
The Formatted Seach (FMS) works when there is an 'Event' performed by the user on that particular B1 Window. This input can be in the form of 'Shift+F2 or also if there is a change which the user initiated in the values on that Window. So depending on this the values int he specific field will change.
In essence, what I mean is that there has to be a User Initiated actions which has to occur on that particular B1 Window and only then the FMS would work.
For more information on FMS, please have a look at the following link :
[Formatted Search Documentation|https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000437965&_OBJECT=011000358700003625432006E&_SCENARIO=01100035870000000183&]
If you still have any doubts, please let us know..
Regards
Arshdeep

Similar Messages

Formatted Search on A/R Invoice Row level

Hi All,
I need your help to do some arithmetical functions on UDFs.
I have three UDFs at row level of A/R Invoices.
U_MRP, U_AssValue (Unit & Totals -> Amount)
U_abtment (Unit & Totals -> Rate)
I want to do below process, but it gives me error.
Select ($($38.U_MRP) - ($($38.U_MRP)* $($38.u_abtment))/100) * $($38.11.0)
but it gives me error. Can any body help me to correct this query to set on U_AssValue as formatted search.
Its very urgent & Important for me.
Best Regards,
Chintesh Soni

Hi,
I tried by creating UDF as u mentioned. For me its working perfectly.
i will tell u how i created UDF created.
MRP --> Units & Total --> Amounts
AssValue --> Units & Total --> Amounts
abtment --> Units & Total --> Rate.
Save the query as A/r in query generated.
Select ($[$38.U_MRP.number] - ($[$38.U_MRP.number] * $[$38.U_abtment.number]) / 100) * $[$38.11.number]
Called this query in the AssValue, Qty --> 2, MRP --> 123, abtment --> 123 final output --> -58.
Please remove http:// and add set bracket over there.
Above query is working fine.
Sagar

MD21 and MRP forecasting

Hello,
I am running MRP(forecast based) and found that system does make changes in planning file(MD21),
if there are changes made in GR/GI, scrap, Materials master and PO etc.
But does not make change, if these changes are in Sales order, new sales order, creation delivery and picked by TO/WM etc...
My understanding is that if new sales order created/deliveries changed, if should add made the entry in MD21 as all these changes and run with MRP as these are recorded in MD04.
Other thing is: Processing Indicator, after making PGI, it did not reset the indicator. I have checked fully may be qty was smal l!!
Please suggest.
Regards,
JPS

Hello
Please try to provide more details when opening a thread, so that people can understand exactly what is your problem.
I have searched for a functionality called "Interactive Graphics" and the only reference that I found was on Sales and Operations Planning (PP-SOP):
Sales &amp; Operations Planning (LO-LIS-PLN) - SAP Library
Are these the same interactive graphics refered on your thread? If this is the case, there is no such functionality on MRP.
BR
Caetano

Formatted Search for Sales Order

Hi,
I setup a formatted search in Sales Order unit price field.
Condition required:
If Sales Order is copied from Sales Quotation, unit price remains as per Sales Quotation unit price, else formula to calculate mininum selling price appllies.
Here's the query:
DECLARE @BASE_ENTRY INT
DECLARE @PRICE NUMERIC(19,6)
SET @BASE_ENTRY = ISNULL($[$38.45.0],0)
SET @PRICE = $[$38.14.0]
IF @BASE_ENTRY = 0
BEGIN
SELECT T0.[AvgPrice]*(1+T0.[U_SPFactor])
FROM OITM T0
WHERE T0.[ItemCode]=$[$38.1.0]
END
ELSE
BEGIN
SELECT @PRICE
END
l have no issue if the Sales Order copied from Sales Quotation, however when enter the Sales Order manually the formatted search having error message:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Error converting data type nvarchar to numeric.
FMS execution failed on field '' with query name 'Get Minimum Selling Price (SO)'
Looks like my query has error...

Hi ,
Try this below query and let me know your feedback,
DECLARE @BASE_ENTRY INT
DECLARE @PRICE NUMERIC(19,6)
SET @BASE_ENTRY = ISNULL($[$38.45.0],0)
SET @PRICE = $[$38.14.Number]
IF @BASE_ENTRY = 0
BEGIN
SELECT T0.[AvgPrice]*(1+T0.[U_SPFactor])
FROM OITM T0
WHERE T0.[ItemCode]=$[$38.1.0]
END
ELSE
BEGIN
SELECT @PRICE
END

Help needed for Formatted Search

Hai Experts,
would like to ask you some clarification on Formatted Search. In the
query I found $http://$44.2.1 given in the criteria part.
In some articles it was mentioned that, the 44 meant for the table
connected with the form and 2 is field index and so on.
Can you please explain how to find out those numbers and field index.
I need to work out planty of FMS to fetch data into
UDF automatically based on user input.
Regards
Anand

Hi Anand,
You may check these threads first:
Re: Vendor default GL FMS help
Re: Runtime data calculation
Thanks,
Gordon

Formatted Search - Restrict to Only One Customer on Activity Window

Hello Experts:
Am trying to create a formatted search to provide a suggested RMA Number on the Business Partners > Activity window in a UDF.
While in Activity, the user should get a list of ONLY the one customer they are currently working with. So if C0001 is being used in the Activity window, the list should show all suggested RMA numbers just for that customer of C0001, not any other customer.
When I use the following it shows all customers.
--FMS 6BP Automated RMA Number
SELECT
T1.[CardCode] + ' - ' + ltrim(str(T0.[ClgCode]))
FROM OCLG T0
INNER JOIN OCRD T1
ON T0.CardCode = T1.CardCode
ORDER BY
T1.CardCode Desc,
T1.[CardCode] + ' - ' + ltrim(str(T0.[ClgCode])) Desc
When I put in WHERE T1.CardCode = $[$ 9.0.0 ] in the right place it shows nothing...
Any ideas on how to make only the one current customer in Activity window appear in the list???
Thanks in Advance - Zal

Thanks Istvan and Gordon...
Istvan - that is the same as my SQL - just do not know how to show the $[$... correctly in this forum - it always goes to that http thing.
Gordon - tried to use your SQL but it gave me an error of "Internal Error (-1003) Occured [Message 131-183] every time I tried to click on the magnifying glass. However, due to your last line in the SQL it gave me an idea that eventually they were OK with - namely, the highest number to the top of T0.ClgCode...
Thanks again guys - Zal

Formatted Search for Delivery Date field in SO not working

Hi All
Can anyone help me as to why my formatted search is not working?
I am currently using SAP B1A SP01 Patch 19.
I have created a user query as follows:
SELECT $ [$10.0.DATE] + 5
When I add this to the delivery field within the Sales Order and bring through the saved query which I set to auto refresh when the Posting Date field changes and to Display Saved Values it doesn't work.
Any ideas?
Thanks and best wishes
Gail

HI Gail,
If I am not mistaken you want to add days to the posting date...if that is so then try this out:
SELECT $[ORDR.DocDate.DATE]+5 From ORDR T0 For Browse
Set The indicator to Auto Refresh when the fields change
Nagesh

Formated search

Hi all,
In Dunning Wizard, step 5, I want to make a formated search to select only some documents. The Query I need is complicated so I tried to do Select ' ' or Select 'N' or Select 'Y' in all this examples when I do "Shift F2" nothing happens. Even with auto Refresh nothing happens. Perhaps Formated Searchs dont work on CheckBox Fields.
How can I solve this?
Any help will be apreciated.
Best regards,
José Silva
Edited by: José Silva on Jul 16, 2010 12:45 PM

HI SILVA,
plz paste ur query ...
then we update in query.
Thanks,
JRAJPUT

How to club 2 queries in one formatted search query

Hi All,
I have inserted a formatted search in the stock transfer for chnaging the 'From warehouse' based on series.
I have written following query for same,
SELECT $[$18.1.0]='08' WHERE $[OWTR.series] ='46'
It is working Fine
I want ot use same concept for selecting other based on other warehouse
e.g
SELECT $[$23.5.1]='02' WHERE $[OWTR.series] ='45'
But I am not able to club these queries on one formatted search query can anybody help to group it in one formatted search query....
Thanks and Regards,
Atul Joshi
Edited by: Atul Joshi on Dec 23, 2008 5:20 PM

Hi Atul,
You could define the quey like this
SELECT
CASE
WHEN $[OWTR.series]='46' THEN '08'
WHEN $[OWTR.series]='45' then '02'
end
from OWTR
Regards,
Vijay kumar
SAP Business One Forums Team

Is there a way to NOT have the data from a formatted search highlighted

Hi all,
I have a formatted search that returns a big chunk of data, some comments that are then added to. When the fs is fired, it returns the data, but all of the data is highlighted so when the user starts typing they overwrite the data that was just returned. I know they could just hit the right arrow key or click their mouse at the end, but they don't do that half of the time. I also know they could use ctrl-z or undo when they do this, but they don't do that either. It would just be nice if they could fire the fs and when the data is returned, the cursor would be at the end of the data.
Any thoughts?

I don't think there are any options for you to change default system behavior like this. What you may do is to change your FMS logic to get only one record if possible. Post your query here if you can.
Thanks,
Gordon

Formatted Search with multiple conditions

Hi experts,
I am using a formatted search to update the Unit price in Sales Order. Query mentioned below.
Select      T0.ItemCode,
               T0.ItemPrice,
From        ITM1 T0 inner join OPLN T1 on T0.PriceList = T1.ListNum
Where      T0.ItemCode = '[$38.1.0]'
     and     T1.u_location = '$[$38.2000002049.0]'
But while adding Item on Sales Order, it is showing error, Incorrect Syntax near '$[$38.2000002049.0]'.
Note: I have added an UDF named U_LOCATION( Alphanumeric, 10) in OPLN and selecting location in Price List through another FMS which is working perfectly.
Please help in this regards.
Thanks in Advance.
Nabyendu

Hi Nabyendu Saha..
You said the u_location as alphanumeric the why you have given 0 for the field type in the FMS...
Select      T0.ItemCode,
               T0.ItemPrice,
From        ITM1 T0 inner join OPLN T1 on T0.PriceList = T1.ListNum
Where      T0.ItemCode = '[$38.1.0]'
     and     T1.u_location = '$[$38.2000002049]'
or
Select      T0.ItemCode,
               T0.ItemPrice,
From        ITM1 T0 inner join OPLN T1 on T0.PriceList = T1.ListNum
Where      T0.ItemCode = [$38.1.0]
     and     T1.u_location = $[ordr.u_location]
Try the above , hope helpful
Regards,
Kennedy

Auto-refresh formatted search is not working properly...

I have created a User Defined Field in Item Master named: FLD1 (Alphanumeric 30)
Then I have created a User Defined Field in Marketing Documents Row: FLD1 (Alphanumeric 30)
Now I want as follows u2013
In Marketing Documents if I select any Item, the value saved in FLD1 in the Item Master will come automatically in the Field FLD1 of the Marketing Document.
I did as follows u2013
I have created a formatted search for the above marketing document (in Sales Quotation) for the field FLD1 as follows u2013
Option: Search in Existing User-Defined Values according to Saved Query
Query: GetItemFLD1 (SELECT $[OITM.U_FLD1] )
Option: Auto Refresh -
When Exiting Altered Column
Field: Item Description
Option: Display Saved User-Defined Values
But the above is not working automatically --- after saving the document if I click on the Formatted Search Marker then the value comes otherwise not.
Can any one please explain the reason behind?
for SAP B1 2007 B SP0 PL7
Edited by: Narottam Das on May 5, 2009 1:53 PM

Check this thread for explanation of Syntax of FMS:
[Refer to Sales Order From Payment Means;
Refer Suda Sampath reply that explains clearly

Formated Search: Auto refresh with two conditions.

Hi,
I've created a Formated Search in one of my column.
I defined my formated search as :
- Auto refresh "When Exiting Altered Column" Item No.
- Display Saved Values.
Now how can I make it Auto refresh with two conditions?
- Auto refresh "When Exiting Altered Column" Item No.
And
- Auto refresh "When Field Changes" Customers/Vendor Code.
- Display Saved Values.
Is there any way to make it work?
Thanks In Advance.
Bruce.

Hi Bruce,
You could try this trick.
You need to execute SELECT1 in Col1 when Item No. column is altered or the Customer code is changed.
Then, in the Item No. column asign a new Formatted Search which selects the Item No. column value (Its value) when the Customer code is changed.
And in the Col1 asign a formatted search that acts when the Item No. column is altered.
I think this should do the trick.
Let us know if works.
Regards,
Ibai Peñ

How to display an error message after validation in Formatted Search?

Hi SBO experts,
if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
Thanks & Regards,
Raghu Iyer

i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
if $[$38.11.0] > 50
begin
select @error = 1
select @error_message = 'Vendor code cannot begin to X sign.'
end
the system throws the error : Internal error (8180) occurred [Message 131-183]
actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0]) > 0
begin
select @error = 1
select @error_message = 'Error in Quantity.'
end
but, this expression to get the remainder itself seems to have some error
$[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0])
i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
Regards,
Raghu Iyer

How do i deduct dates using formatted search with a query

Hi Experts,
I would like to know how to get the date difference using query and formatted search. Below are the details:
1. I have created 3 Header UDF's composed of 2 Date type fields and 1 Quantity field.
2. The first one is for the Original Date, the next one is for the Payment Date and the Last one is for the No. of Days Lapsed.
What I would like to do is automatically compute for the number of days from the original date to the payment date. What query syntax should i use to achieve this?
Thanks,
Yvette

Hi Yvette,
It should be something like;
DATEDIFF (day, T0.[createDate], T0.[closeDate] ) as 'Aging' This is just an example. You may add your udf's instead of dates.
Thanks,
Joseph
Edited by: Joseph Antony on Jul 2, 2010 1:53 PM

MRP Forecast - Formatted search

Similar Messages

Maybe you are looking for