MRP in Mode 3 not running

Hello All,
While running MRP in background with mode 3 the proposals are not deleted & recreated or even not rescheduled with the changed lead time in the master recipe.
But with the same parameters MD02 is perfectly behaving as expected.
I have even ran the Planning file entry & consistency , Still not solved.
Please help me...
Regards
Mahesh

Hi Mahesh
I think the material does not have planning file entry flag...
Different from MD02, MD01 or MRP background job (MDBT) always require planning file entry flag to schedule certain material.
(In MD02, it does not require planning file entry flag to carry out MRP.
So even you delete planning file entry flag that exist in table MDVM / DBVM<In
case of MRP area is used>, you can still carry out MRP to material).
However MD01 and MDBT (program RMMRP000) always require planning file entry flag. So if certain material does not have any flag, this material is not scheduled during MRP.
Planning file entry flag is set when certain action is carried out.
-Creating Sales order
-Adjust PIR
-BOM change
-Material master change (but not all field change. Only MRP relevant area change)
*If you change routing or Master Recipe change, this does not update planning file entry flag. So in this case, this material have to wait other action that trigger MRP or schedule this material from MD02 or carry out MRP with NEUPL mode.
(For this behavior please check SAP Note 88669)
Best Regards
Keiji

Similar Messages

Windows XP Mode will not run

I have installed Windows Virtual PC and Windows XP mode following the steps outlined on the Microsoft website.
I enabled hardware virtualization in the BIOS, as requested, and then ran the hardware virtualization detect tool, and this indicated that hardware virtualization was working ok.
When I try to run Windows XP Mode, I get the following error message:
"Cannot start Windows Virtual PC Host Process. Check the system event log for more details
Server execution failed"
The Event Viewer shows the following Errors for Virtual PC:
"One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
and
"Virtual machine Error - Server execution failed (0x80080005)"
I have reinstalled Virtual PC, and I get the same errors.
I looked at Device Manager, and Virtual PC Host Bus Driver has an exlamation mark, indicating there is a problem. The driver properties reports:
"Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)"
If I try to update the driver software, it reports that the best driver software is already installed.
I get this same device driver error after uninstalling everything, and then re-installing in the order stipulated on the Microsoft website.
I need to be able to run a Windows XP virtual machine, so please can someone help with this.
Details of my PC are as follows:
Operating System: Windows 7 Professional 64 bit.
Processor: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz 3.40 GHz
Installed memory (RAM): 32.0 GB
Motherboard: Asus P8CWS

This thread is a discussion of a few things that can cause that, hopefully one of the fixes will help you.
http://social.technet.microsoft.com/Forums/en-US/5be5c8e0-bb3e-4c6b-98a1-b44b7eb5e83a/windows-virtual-machine-doesnt-start
Bob Comer Microsoft MVP -- Hyper-V

Remote Enabled function module of SAP working - debug mode but not run mode

Hi,
When a remote function module is called from Java a message should get thrown from the function module which the FM is throwing but Java is not able to fetch the error. This problem is coming in execution mode but if we are in debugging mode and go to the function module remotely the error is getting triggered.
Please suggest the solution to the problem.
Thanks,
Abhishek

Hello
try something like this
try {
JCO.Client.execute(myFunction)
} catch (JCO.AbapException ex) {
System.out.println ("ABAP Exception: " + ex.getKey() + " " + ex.getMessage());
the problem is, that JCo ABAP Exceptions are subclasses of java.lang.RuntimeException so the Java Compiler doesn't force you to catch them
regards franz
reward points if useful

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
Was IE11 ever offered (or installed) via Windows Update?
Is her computer currently fully-patched at Windows Update?
Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Troubleshoot Shockwave Player installation for Windows
http://kb2.adobe.com/cps/403/kb403264.html
You will find support for Shockwave Player in this forum:
http://forums.adobe.com/community/webplayers/webplayers_shockwave
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Help I itunes will not recognize my iphone or ipod. Trouble with USB driver, device not running in safe mode, and HDCP not supported.

Help! When I connect my iphone or ipod touch to my computer, windows recognizes my device but itunes will not. I can still see my songs, videos, and access the itunes store but my phone and itunes store have no connection so it does me no good. I have for 2 days now tried every trouble shooting method posted with no luck. I think I may have finally found a lead. My Apple Mobile Device USB Driver is showing up under portable mobile devices while it is supposed to be showing up under universal serial Bus controllers from my understanding? Also, while running my diagnostic report under itunes it also says itunes is not running in safe mode, it is not showing enabled in windows firewall (which it is checked), and the HDCP is not supported. I don't know what to do? I am in tears here, someone please help!!!

See Here for Device not recognised:
http://support.apple.com/kb/TS1538
Here for General Support:
http://www.apple.com/support/
This may also be helpful:
AMDS for Windows
http://support.apple.com/kb/TS1567

Not running MRP but has Purch Req with Sales Order as pegged reqmnt in AFS

Hello Gurus!
MRP run is activated in the Plant but we do not run MRP (no MRP batch job nor manual MRP). However, there are materials that have Purch Reqs with creation indicator as MRP showing pegged reqmnt from Sales Order even if Item category is the same.
My initial check shows that those materials with issue has MRP Indicator as BLANK(Multi-level, transaction dependent MRP) and those that do not generate Purch Req from SOs has N(No transaction-dependent MRP). However, transaction dependent MRP is not activated.
Can you provide areas where I should check/other probable cause of this?
Your valuable insights is deeply appreciated. Thanks!

Hello?
I just want to update how this was resolved.
I found out that MRP Indicator field in AFS MRP view for the materials with MRP generated Purch Reqs is maintained as BLANK(Multi-level, transaction dependent MRP) in AFS MRP view instead of N(No transaction-dependent MRP) but there is no transaction group maintained. So MRP run is triggered whenevert there is MRP relevant transactions performed.

I upgraded to FF 3.6.10 and now FF will not run at all. (Safe Mode will.)

I upgraded to FF 3.6.10. I have tried opening/starting FF from the Start Menu, from the Desktop FF Icon, and from the Program Folders Mozilla folder.
When I try to run FF, it will not start. In the Task Manager, FF shows up in the list of Processes -- for 1 second or less, and then disappears.
FF Safe Mode, however, will run.

If you do not have the original install DVDs, use the Aperture Trial installer instead:
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Regards
Léonie

Installed iTunes 11.0.4.4 64-bit but window 8 pro 64-bit in task manager reports that iTunes is 32-bit. Why? Not running in compatibility mode. Uninstalled and reinstalled. Same result.

Installed iTunes 11.0.4.4 64-bit version. Now windows 8 pro 64-bit reports iTunes as 32-bit in task manager. Why? Both my computer and operating system are 64-bit. ITunes is not running in compatibility mode. All my music files are MP3. I uninstalled iTunes and downloaded iTunes64setup.exe from apple and still having the same result. This was a clean install by-the-way.

Hello irie00,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

Fire Fox v3.6.3 will not run in normal or safe mode, also will not uninstall

FF v 3.6.3 for windows vista will not open and run in normal or safe mode, FF will not uninstall from folder or add/remove programs, tried to reinstall from Mozilla site did not work. Internet Explorer also will not run and crashes. I am using Safari it runs fine no problems. FF has been crashing for about a week unexpectedly but will reopen and run, but will not run at all now..?
== Crash ID(s) ==
ID: e3f78c3f-b182-44a9-8ef6-ca84c2100617
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10

From the Crash ID information, it seems this is related to the AVG antivirus, version 8.5. If possible, please try updating you AVG installation (the program) to latest version; according to [https://bugzilla.mozilla.org/show_bug.cgi?id=547210 Bug 547210] AVG has released an update May 17. to AVG version 9 that should fix this problem.
Please let us know if this fixes the problem with Firefox crashing.

Server not running SSIS job in 32bit mode

I have a package that I developed in VS2012 (using the SQL Data Tools component) which collects data from a DBF file using the VFPOLEDB provider, and puts it into a database on a SQL Server 2012 X64 server. The project containing the package has the DebugOption
of Run64BitRuntime set to false. I have imported this package to the SSIS Package Store of a test and live server (identical setups). The VFPOLEDB provider is installed on both, and I can see in the registry of both machines that it's there for 32bit runtimes.
The package runs fine on the test machine, but fails on the live machine. The live instance of SQL does not appear to recognize the 32bit VFPOLEDB provider that is installed.
The only difference in the instances of SQL is that the live environment has an Integration Service Catalog set up, where as the test does not. Looking at the logs of the servers, when the live starts, it runs sp_ssis_startup, and then logs messages about
unsafe assemblies being loaded in. This SP is not run on the test environment because there is no catalog.
The jobs I create have the flag set to use the 32bit runtime, but I can't help but feel that the SSIS Catalog is having an issue with the VFPOLEDB I am using, and not loading it.
I don't really know anything about the SSIS catalog, so is anyone able to suggest any direction I could move in?

I am not sure what you want in terms of job step setup information.
The history is a single message:
Message
Executed as user: MDA\catbert. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 6:52:01 PM Error: 2015-02-03 18:52:01.10
Code: 0xC0209303     Source: NEF Transfer SSIS2012 Connection manager "Source Connection"     Description: The requested OLE DB provider VFPOLEDB.1 is not registered. If the 64-bit driver is not installed,
run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error
Error: 2015-02-03 18:52:01.10     Code: 0xC020801C     Source: Data Flow Task OLE DB Source [100]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection
method call to the connection manager "Source Connection" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error:
2015-02-03 18:52:01.10     Code: 0xC0047017     Source: Data Flow Task SSIS.Pipeline     Description: OLE DB Source failed validation and returned error code 0xC020801C. End Error Error:
2015-02-03 18:52:01.10     Code: 0xC004700C     Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2015-02-03 18:52:01.10
Code: 0xC0024107     Source: Data Flow Task      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:52:01
PM Finished: 6:52:01 PM Elapsed: 0.094 seconds. The package execution failed. The step failed.

HT1369 During the updation of 10.7 version of Itunes on my iphone 4s, my phone has gone into recovery mode & is not showing up in i Tunes nor in my computer (windows xp). What shall i do so that my phone gets connected & running??

During the updation of 10.7 version of Itunes on my iphone 4s, my phone has gone into recovery mode & is not showing up in i Tunes nor in my computer (windows xp). What shall i do so that my phone gets connected & running??

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

When my Itunes diagnostic's finishes running it says Itunes not running in safe mode. What is that and how do I enable it?

My Itunes diagnostic's say's that my Itunes is not running in safe mode. What is this and how do I enable it? I have the latest version of Itunes.

you cannot update this software because you have not owned the major version of this software
Shouldn't give away the secret of how easy it is.....

HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine?

MRP in Mode 3 not running

Similar Messages

Maybe you are looking for