Mrp indicator need to activate

Mrp indicator need to activate
When i do GRN, i need to activate mrp indicator at GRN screen. but it is grey mode (display). i need that is optional mode. because i need to tick that
Regards
karan

Hi,
Select check box of u201CDuty different at GR" in MIGO Setting segment in Maintaining Excise Group setting in following path.
SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
With above setting, you can edit excise details are in MIGO t.code. More check SAP note 1104456 for use of MRP indicator.
NOTE:
MRP indicator is used in the case of dealer or agency invoice where business not known exactly excise values during PO creation but when dealer or agency submit invoice with all excise values & business needs to capture all excises during Goods Receipt & then do invoice verification.
Regards,
Biju K

Similar Messages

  • In excise invoice data , MRP indicator needs to be made mandatory

    Friends,
      While doing GRN, in more data for excise invoice, I would like to make the field MRP indicator  mandatory. Can any body help me to make this happen?
    regards,ebenezer

    Hi Ramesh
    In copy control VTFL for NL->F8, I made the copying requirement at header as '003' ( replacing 009 as was the original).
    -Also,as per earlier suggestion, I changed the Copying requirement at Item level ..i.e for NLN to 034 ( replacing 010 as was original).
    Next I ran the cycle
    a) Created a PO. ..ME21n
    b) Created replenishment delivery .VL10B
    c)Picked the Delivery Quantity ..VL02n
    d) Tried ..Generating Proforma invoice .of .type F8 .in  VF01 . It didn't allow.
    This was fine and satisfy my requirement of not being allowed to do invoicing before PGI.
    Next ....
    e) Did PGI for that delivery.
    f) Tried to generate proforma invoice ..type F8 . But the system is not allowing me to do so.
    Processing status-Incorrect.
    Error log..The document is not relevant for invoicing.
    What is the way out?
    (As a fyi..without the changes I did  in copy control, I was able to generate Proforma invoice after PGI.earlier)

  • Mixed MRP Indicator

    Hi ,
    Can any one explain me the use of Mixed MRP indicator in MRP view of  material master. What is the use of this and when we need to activate this. Thx in advance

    Hi,
    Mixed MRP indicator is used mainly in case when Gross Requirement Planning is used i.e. when you have requirement of not considering plant / stor locn stock in MRP run then you need to use strategy group 11 Gross requirement planning along with Mixed MRP Indicator as
    2     Gross requirements planning
    Regards,
    Tejas

  • MRP Indicator check box in MIGO

    Dear All,
    While capturing Excise Invoice during Goods Receipt (T.Code: MIGO), in Excise Invoice tab of MIGO screen- there is a button for " More Data". After clicking that button and in the 'Miscellaneous' tab , there is a MRP Indicator check box.
    Please let me know when we need to flag MRP Indicator check box.My doubt is in which scenario, we need to flag that check box.
    Regards,
    Phani

    Dear Piyush,
    Tnx for ur solution.
    Scenario-1: MIGO done & MIRO not done:
    MRP indicator flagged:
    In this case, the value of the material will be the Basic material price minus the Excise duty amount. ( For eg: material base value =Rs. 1000;  BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.792.
    MRP indicator NOT flagged:
    In this case, the value of the material will be the Basic material price.( For eg: material base value =Rs. 1000;  BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.1000.
    Scenario-2: MIGO done & MIRO  done:
    MRP indicator flagged:
    In this case, the value of the material will be the Basic material price. ( For eg: material base value =Rs. 1000;  BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.1000. (the ED amount of (1603216) will be debited to material value while doing MIRO poting.
    MRP indicator NOT flagged:
    In this case, the value of the material will be the Basic material price.( For eg: material base value =Rs. 1000;  BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.1000.(Rs. 1000/- debited to material account while doing MIGO itself) .
    Concludingly, I want to know in what scenario we will flag the MRP Indicator. Please note that I am aware of the trading scenario also.
    Regards,
    Phani

  • MRP indicator in Goods Receipt

    Hi All,
    MRP indicator when we post the Goods Receipt for excise material.
    And when we ticked the MRP indicator tab then your GR/IR amount is not equivalent to po net price.
    So I need that MRP indicator should be GREY out for plant secific, so that no one can ticked that MRP indactor.
    Is it possible to grey out the MRP indicator for plant specific or comapny code specific.
    Thanks..
    Trupti

    Hi,
        Ask your Basis Person,you can control through only authorization level of that perticular plannt.you have to tell the object of the MRP indicator.

  • GRN MRP Indicator Mandatory Possible or not ???

    Dear All,
    While capturing Excise Invoice during Goods Receipt (T.Code: MIGO), in Excise Invoice tab of MIGO screen- there is a button for " More Data". After clicking that button and in the 'Miscellaneous' tab , there is a MRP Indicator check box.
    Please let me know when we need to MRP Indicator flag (Auto tick) Mandatory in Excise tab 03. Only Capture Excise Invoice
    Possible or not ???????

    Dear SAP
    Please help me,
    While capturing Excise Invoice during Goods Receipt (T.Code: MIGO), in Excise Invoice tab of MIGO screen there is a button for " More Data". After clicking that button and in the 'Miscellaneous' tab , there is a MRP Indicator check box.
    Please let me know when we need to MRP Indicator not tick in Option { Excise Action :- 3) Only Capture Excise Invoice ) GR(Goods Receipt) Not Save and Error or Warning Massage Required.
    Possible or not ???????
    if Possible Please guide me to Step.

  • Can't open Microsoft Office 2011 even after unistalling then reinstalling. Error message comes up before launch. What do I do? Can I fix this? I need to activate Microsoft Office within 15 days!!

    I recently got a new MacBook Pro Running on OSX Mavericks and used Time Machine to move my documents and applications. However Microsoft Office Student/ Home applications did not work and requested a product key. I did not have the product key for it as I had installed Microsoft a long time ago, so I purchased a new Mincrosoft Office 2011 Student/Home Pin to install Microsoft Office. Everything installed fine, however when I go to open it it failed to open.
    I need to activate my Microsoft Office within 15 days apparently and this is done when the application is launched. However none of the Microsoft Office applications do Launch (not Word, Powerpoint, Excel or Outlook).
    Whenever I tried to open one of the named above the Microsoft Error Reporting App would pop up and list the errors. I was advised on other support pages to disenable this app so I have done that but now Word is now giving its own error message saying:
    Process:    
    Microsoft Word [1380]
    Path:       
    /Applications/Microsoft Office 2011/Microsoft Word.app/Contents/MacOS/Microsoft Word
    Identifier: 
    com.microsoft.Word
    Version:    
    14.3.9 (14.3.9)
    Build Info: 
    Unknown-131030~0
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [152]
    Responsible:
    Microsoft Word [1380]
    I don't know or understand what is stopping me from launching my Misrosoft Office. I am wondering if others have encountered similar problems with OSX Mavericks and the Microsoft Office 2011? Does anyone have any ideas of how I can get it to launch?
    I need to get hold of my Word and Powerpoint Documents ASAP.

    Build Info:
    Unknown-131030~0
    This indicates you had a bad install. You need to completely remove Office and reinstall using your new CD Key. See instructions here. Do not do the simple remove, Use the COMPLETELY REMOVE ALL FILES steps.
    http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/
    so I purchased a new Mincrosoft Office 2011 Student/Home Pin to install Microsoft Office.
    You don't purchase a PIN. A PIN is generated when you install Office. You need a CD Key. If you bought Office365, you activate online.
    I have issues with the Microsoft User Data - are there supposed to be two? and where exactly do they belon. They are in the Documents file at the moment.
    Unless you used Outlook or Entourage you can delete both Microsoft User Data folders. When you install Office it will create a new one. Only Outlook & Entourage used this folder for data. W,E,P stores it's data in the User's Library/Application Support/Microsoft folder now.
    For help with removing dulicatate fonts installed by Office see:
    Office 2011 Font Management with Mavericks

  • LTP excludes materials with MRP indicator of storage location

    Hi All,
    SAP Note 208017 explains the reason for LTP not taking into account the MRP
    indicator of a storage location for a material. Has anyone tried a work around for this issue?
    <b>We basically are looking for a snapshot of operative MRP a week back from current date</b> and I thought LTP can be used, but it plans at the plant stock level. Since we have service inventory managed at storage location level and its exculded in operative MRP, we cant have consistent results with LTP being used for my purpose.
    Any inputs appreciated
    Thanks

    Hi,
    1. I dont think we should use the LTP Forthe purpose of your requriement
    2. Since i think you will be runing the MRP at certain frequency say daily,weekly etc
    3. LTP is a strong functionality for the forward planning , which means for a medium or long term in the forward direction
    4. For the purpose of snap shot we shouldnot use this ...
    may be pp gurus in the forum will be giving  us some reply which you are looking for
    reg
    dskumar

  • For Dealar's Invoice MRP indicator is not appearing in J1IEX

    Dear All,
    We are trying to capture the the Dealar's Invoice through J1IEX,
    in po Rate is maintained as per Rs 100 and VAT 4% and then GR is made for the same without captuing any excise in MIGO.
    and then we are tring to capture and post this excise invoice in J1IEX but system is not showing MRP indicator to facilitate mannual entry of excise values,
    and for this we have maintained all the J1ID master data.
    Please suggest
    Vimlesh

    Dear Vimlesh,
    The purpose of MRP indicator is to change the grn value, which maintion in po.
    i.e if your po price is 100, then your grn valu should be (100- exicse value).
    Now if you already done grn, & then you go for capture the excise in J1IEX, then purpose of MRP indicator is useless, thats why its not coming during capture w.r.t GRN.
    MRP indicator is reflecting only during GRN in MIGO if you capture excise  or capture excise w.r.t po in J1IEX before GRN.
    Hope you got the solution

  • Hello   my i phone was dropped and i changed its battery now i need to activate it but  i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3  your answer will be highly appreciated

    hello
    my i phone was dropped and i changed its battery now i need to activate it but  i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3
    your answer will be highly appreciated

    Use the links provided.
    Recover your AppleID via https://appleid.apple.com/
    Reset your password via iforgot.apple.com
    If the iPhone is asking for an AppleID you do not recognize, the iPhone
    is Activation Locked. Only the person who initiated the Activation Lock
    can remove it. There is no workaround for Activation Lock.

  • HT201363 my i phone was dropped and i changed its battery now i need to activate it but  i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3

    my i phone was dropped and i changed its battery now i need to activate it but  i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3

    Use the links provided.
    Recover your AppleID via https://appleid.apple.com/
    Reset your password via iforgot.apple.com
    If the iPhone is asking for an AppleID you do not recognize, the iPhone
    is Activation Locked. Only the person who initiated the Activation Lock
    can remove it. There is no workaround for Activation Lock.

  • This may be a duplicate but, I have a new ipad mini that I need to activate but I need to get my data from my 1pad 1 which has never been backed up.  How do I get the data from the ipad 1 to the new mini?  I have itunes acct and also Icloud acct.  Thanks

    I have a new ipad mini that I need to activate but I need to get the data from my old ipad 1 and install on the new mini.  I have a itunes acct and also icloud acct.  How do I back up the ipad 1 data and then activate the mini.  I assume I will need to transfer the sim from the ipad 1 to the mini.
    Thanks for any info
    wino454

    How to Transfer Everything from an Old iPad to New iPad
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
     Cheers, Tom

  • MRP Indicator while making a GRN : Difference in GR/IR value.

    Hi, 
      I am trying to make a GR for an imported material against a foreign PO. There is a MRP Indicator Check box in Excise Tab's Additional Input button.
    The issue is that
        1. When I mark the MRP Indicator ( In excise tab - Addition Input button ) then the GR/IR values are shown different after MIRO. But if we do not tick that then the values shown are correct and same as posted.
       2.. When I do not mark then system prevents me from changing the Excise values ( i have created CVD already ) and keeps overwriting values with some other value each time i change and press return.
    Can anyone help on what is this MRP indicator meant for & used for and what are its implications.
    Thanks.

    hi
    the MRP indicator is use in trading scenario
    means ur taking goods from first stage dealer for which u will get excise values at time of GR and not at time of PO
    so at time of PO u will have total value including excise and u dont know the amount of excise duty in that
    check following u will get idea
    This is Traders pass-on scenario.
    E.g.:
    Material Price = 80/-
    Excise Duty = 14/- (BEDECessSECess)
    Margin = 6/-
    Total =100/-
    VAT @3% = 3/-
    Grand Total =103/-
    Step 1:
    Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
    Step 2:
    Post MIGO and Capture Excise Part - 1
    Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
    Step 3;
    Post Excise Part 2 in J1IEX
    Step 4:
    Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
    check note no 1104456  at SERVICE.SAP.COM
    regards
    kunal

  • Reoprder point and replenisshment qty to be 0 with SLOC MRP indicator = 2

    Dear PP Gurus,
    I want to set in MRP4 view: SLOC MRP indicator  = 2, along with reorder point  = 0/ blank and replenishment  = 0/blank. In MM01 and also through MMSC is gives:
    Hard error with details as
    "You have decided in favor of storage location MRP (2) for this material. Since separately planned storage location stocks are planned using the reorder point planning technique, a reorder point and a replenishment quantity are required."
    Can the hard stop be changed to a warning message only?
    Help will be appropriately rewared with points!
    Thnx.

    Hi,
    if u want to plan storage locations stock seperately( =2), u have to define reorder level and a replenishment quantity.
    During a planning run, the system compares the reorder level of storage locations to be planned separately with the stock of this storage location. If available storage location stock falls below the reorder level, a receipt element is created amounting to the replenishment quantity or, if necessary, for a multiple of the replenishment quantity.
    regards
    pradeep

  • In Depot Plant while Doing MIGO MRP indicator not found

    Dear All,
    We have one depot plant. for capturing of excise duty while doing MIGO
    I have not found the MRP indicator check box in excise ->misc. Tab.
    But for doing this same process for other manufacturing plant means non Depot plant I have found the MRP check box in excise ->misc. Tab.
    Is there any process to capture the MRP check box indicator in excise ->misc. Tab while doing MIGO for Depot plant or is there any process to book excise duty while doing MIGO for Depot Plant

    Please go through the Scenario #: Dealer Procurement in Excisable Depot scenario in the below link.
    http://scn.sap.com/docs/DOC-45855

Maybe you are looking for