MRP is running in MD03 and not in MD03
Hi all
The MRP is running well in our MD03 T code, but same time we cant do the same in MD01. Let me have the reason.
Basically we have the user exit parameters is implemented, this is running well in our other plant. There is no authorisation message about this. Totally we are searching for scrap
Thenna,
MDAB will indeed create new Planning file entries en masse.
In addition, it is always a good idea to periodically run MDRE to repair any inconsistancies in the planning file.
Some companies run these two programs in batch regularly, say every week or so.
Rgds,
DB49
Similar Messages
-
How to get FlashBuilder 4.6 to run Photoshop 64bit and not 32bit?
Anyone know how to get FlashBuilder 4.6 with Extension Builder 2.1 to run Photoshop 64bit and not 32bit?
Bridge runs 64bit, double click runs 64bit but Flash Builder runs 32 bit.Hi,
Try:
SQL> with t as (
2 select 2357248357953456217244 col from dual union all
3 select 3490872049578204934532 col from dual
4 )
5 select substr(col, 1, 6) part1
6 , substr(col, 7, length(col)-10 ) part2
7 , substr(col, -4, length(col)) part3
8 from t;
PART1 PART2 PART
235724 835795345621 7244
349087 204957820493 4532
2 rows selected.
edit
Hmz, I type way to slow in comparison to Alex and Blu ;)
edit2
Besides typing to slow, I also type too much:
7 , substr(col, -4, length(col)) part3This is indeed enough:
7 , substr(col, -4) part3Thanks for the reminder ;)
Edited by: hoek on Jul 16, 2009 4:54 PM
Edited by: hoek on Jul 16, 2009 4:57 PM -
Here are my components on computer...
Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
I hvae Adobe premier CS6...
Thank you guys!Here are my components on computer...
Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
I hvae Adobe premier CS6...
Thank you guys! -
How long should it take for an icloud backup of about 6.4GB? I selected a manual backup and it has been running all night? Thanks
That's going to depend alot on your internet connection speed. 6.4 GB is alot of data, especially if your connection speed is slow (DSL) or low-end cable speeds of ~1.5 Mbps.
-
I have been having trouble syncing my iphone after updating version 10. Satus keeps showing backing up step 1 of 4 forever on my pc. I have tried re plugging and restarting my pc but none work so far. I have not been able to sync my iphone since. Help!? Pls
Thanks for the stellar reply gdgmacguy. I had no idea the AppleID used to purchase the device was forever tied to it. Great to know.
May I add another layer of complexity to the issue? I plan on buying her the iPhone 4S for Christmas. Assumed all I would have to do is sync the new phone to iTunes on her pc and all her data/apps/music/pictures would transfer over.
Can I use her new account when I sync the 4S for the first time or will it prompt me for mine?
Thanks again. -
MRP Run in MD01 and MD03 is different
Dears,
I am new to MRP processes. Maybe the problem is trivial maybe not.
We have a 9 000 spare parts and would like to use a limited MRP to help operators to know which number of spare parts is coming to shortage.
I set material master and made some settings in customizing for the plant I use.
After that I choose one material which stock is below reorder point.
I run MD03 and system works fine - it creates a planned order.
However when I run MD01 (or se38 ->RMMRP000) with the same parameters as for MD03 , the system creates nothing. Only telling that MRP was run and which parameters I choose.
I run MD16 to see maybe there are some planned order that system created and did not tell me, but nothing as well.
Only MD03 works if I choose the material. However, collective run MD01 is not working.
Any ideas?Hi Zhargal,
Could you pls provide some more info on MRP control parameters you use while running MRP with MD01?
Also refer the following thread for more info on MRP
MRP: Frequently Asked Questions
Regards
Mangesh S -
MRP RUN- KIT BOM explosion not working
We setup one layer BOM’s for our maintenance KITs as parent material and components as child material. For example KIT is TS10000-K1 and components are TS10001, TS10002 etc setup as next layer with in the BOM. Both KITS and components are defined as material types ERSA (Spare parts). These one layers BOMs are setup as production BOMs and expected to create purchase requisitions for KITS and components by exploding BOMs during MRP runs. We use purchase requisitions and convert them into POs to procure both KITS and components. We DO NOT USE Panned orders and Production orders.
The safety stocks / reorder point are considered as demand for KITS and components as we do not have any external demand for KITS and components.
MRP run is creating purchase requisitions automatically for both KITS and components as per safety stocks and reorder point defined in MRP Views of Material Master. This is working as expected.
The issue is: KIT BOM’s are not exploding to generate purchase requisitions for the dependent components of KIT BOM. Please suggest the way to resolve this issue.
Split valuation: Also we plan to use split valued KITS with both new and refurbished. So we need BOM explosion for split valued KITS
also (after the 1st issue is resolved).
I verified the following items to make sure the required configuration and data setup is defined correctly.
1) Planning file activated Plant - OMDU
2) Executed MRP run with Total Planning - MDBT and MD02 (single item, multiple levels)
3) BOM explosion for MRP activated- OS23
4) MRP type in MRP1 view- PD and VB (I tried both separately but BOM is not exploding).
5) Procurement type “F” (MRP 2 view) and lot size “EX”
6) Planning strategy in MRP 3 view (tested w/o planning strategy and with strategies 10 and 40. But BOM is not exploded)
7) BOM status and usage (status is active and usage is for production-CS02 and OS20)
8) BOM Validity date (Valid)
9) BOM structure in CS12 (BOM is exploding in CS11)
10) Availability check
11) Selection of BON ID to have BOM usage indicator assign (OS31).
12) No alternate BOMs or production versions or work scheduling view are used.
Please review the above 2 issues and suggest any workable solution. Thanks in advance!
NOTE: I extensively used MRP with multi-level BOM explosion in my earlier projects without any issue. However the above issue is a bit strange why one layer BOM is not exploded in this case.
Regards
SriniHi
Thanks for your response. I reviewed all SAP notes and none of them are applicable to my scenario.
1808396 - BOM changes not considered by MRP: I have not changed BOMs.
1781324 - MD11: Valid BOM alternative is not found. We do not have alternative BOMs.
1791009 - No BOM explosion after changing production version: We am not using production versions.
Our Material KITS are PM spare assemblies set up as BOMs and consists of individual spare parts as components. We are creating purchase requisitions and not planned orders. We are not using PP functionality/Production orders.
MRP is generating purchase requisitions for KITS and components as per ROP and safety stocks. In other words it is working as expected. The issue is BOMs which are parent assemblies are not exploding to the next lower level components.
Please note that I am not getting any error messages when MRP is executed.
Regards
Srini. -
During MRP run unwanted plant and storage location include and exclude
Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. 1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not. You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK -
MRP run details(date and time when MRP was run)
Hello,
I need time stamps of all MRP/MPS run for a particular material. Please let me know relevant T.code/FM/BADI.Dear
One more way to find this is using Transection Code AUT10.
Here you can find not only Last MRP date but some other useful data also like user, date ,time and so many.
Try it by using T.Code like MD01, MD02, MD40 etc.
Or goto se16-SAP Table MDKP-Here you will get MRP run details
Hope this helps
Regards
JH -
Hi, Can you help me I am running an iMac 10.7.5 and iPad 6.0.1 and a macair10.8.2. iCloud is syncing emails and notes but not photos. Photo streaming is switched on on the iMac. what do I need to do to stream photos?
Hi you have basicly 2 Options.
1 -if you Switch One fotostream on all 3 devices of yours which are working on the same apple id -all Fotos you Take with your iPad will be synchronized via icloud to the other 2 decvices ( w-lan and battery depending).
2- If you select foots or a whole album in iPhoto on your air or iMac and choose than puplish --> fotostream --> new or existing event you can key in a friends mail. If this friend has iCloud and iPhoto ( for iMac or MacBook ) and click on the link in the email it will download this fotos in the fotostream section in iPhoto. If he has a iPad, iPhone,... It will do it in the foto app and if he doesn't have a iCloud account at all and you choose "public web site" while publishing he can see your fotostream on a website. -
I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac -
I believe I was running a 6.3.as.df,msad.f,masdf version of Firefox and my Netflix account was working wonderfully well. I happened to hit the quit button last time, instead of the save and quit button and for some reason, Netflix did not load properly. I cleared the day's history, as usual, and tried again. This usually works. I closed Firefox and tried to reopen it, but it said Firefox was already running, that I would have to restart my computer to solve the issue. I did that twice. Finally, I noticed Firefox was trying to download a new version -- even though I don't recall asking it to do so. Now I'm running 7.0 and my Netflix page doesn't work. I am logged in - great - but I can only access "My Account and Help" page and "Viewing History" but nothing else. Lame! I would love to know how to get this to work. I can't even pull up Netflix's main page on its own. All other websites seem to be working properly. PLEASE ASSIST!
If this were just a Netflix problem, why can I access Netflix through Internet Explorer and not through Firefox? I've been using Firefox to access Netflix for at least the past year and starting yesterday (12/6/11) Firefox doesn't seem to recognize that Netflix exists. I've tried the suggested Firefox "help" which was of no help whatsoever and may even have made life more difficult in accessing other accounts. Anyone know how to contact Netflix or Firefox by phone?
-
What needs to be changed to run Weblogic as a service and not as an application?
The server is running Windows 2000. Weblogic was installed on the server as an
application and not as a service. We need Weblogic to run as a service, could
someone please provide me with information on the easiest way of doing this, as
we can not re-install the Weblogic at this point. Any assistance would be greatly
appreciated.hi.
Run the installNtService.cmd script.
Regards,
Michael
Mariet wrote:
The server is running Windows 2000. Weblogic was installed on the server as an
application and not as a service. We need Weblogic to run as a service, could
someone please provide me with information on the easiest way of doing this, as
we can not re-install the Weblogic at this point. Any assistance would be greatly
appreciated.--
Michael Young
Developer Relations Engineer
BEA Support -
When I close Firefox and try to open the browser next time it tells me Firefox is already running and not responding.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs -
when I start Firefox, it just blinks like crazy and won't do anything. I have gotten a message reading that Firefox is already running. internet explorer still is working
== This happened ==
Every time Firefox opened
== a few days ago. Can't remember if it started before or after I deleted macafee and added norton or notI have this problem too: when I have used and shut down FF and then try to start it again, I get the message that FF is still running, while it's not. Using Windows task manager, I can see that the process is in fact still running. In order to startup startup FF again, I have to end this process manually. This problem is really annoying since I open and close FF several times a day. I run Windows 7.
Maybe you are looking for
-
Interest accrual method calculation for loan interest
Hello, Our company is using the Trsy module for intercompany loans with these settings on the deal: - Interest calculation method of 7 360/360 - Linear Interest Calculation and the - Pro Rata Temporis Calculation selected for both the first and last
-
How do i sign into my apple ID from the Apple homepage?
I need to sign into my apple account and try and backup my broken Iphone 5 before i go and hand it in to Best Buy . I have a passcode on my phone and my screen is broken, so i cant get into to it. The man at Best Buy said to try and back my phone up
-
I have a Pages file that I used my iPad to create. iCloud backed this file up to its server. The problem is that my iPad somehow locked itself. I had to restore it, the file was lost on the iPad, and when I went back to iCloud to retrieve the file it
-
Email submit button doesn't work with Thunderbird
I created a LiveCycle (v8.2.1) form with the email submit button. Works fine if the sender is using Outlook. If their using Thunderbird, it does not. I installed Thunderbird on my system (normally I use Outlook) and set Control Panel/Internet Options
-
ITunes 7.1 - USB 1.1 error msg but using USB 2
Upgraded to iTunes 7.1 and now when I plug in my iPod (5g, 30gb) I get the following error message: The iPod "name of iPod" is connected to a low-speed USB 1.1 port. For better performance you should connect with a high-speed port if one is available