MRP list issue
Hello,
I am having issues when I run MD05 MRP list for a material. It gives me the below error.
"No MRP list exists"
This is a material just extended to a new plant with no stock. Is this issue because there is no stock for it and/or because its a newly extended material?
Same material in a different plant does give me the MRP list view when I run MD05.
let me know how it works.
Thanks
SAP Fans...
Have you had an MRP run after the creation of this material?
If not, then it is obvious that an old MRP run does not know anything about a material created after this event.
Similar Messages
-
MRP List issue(MD05)
Hello,
I am having issues when I run MD05 MRP list for a material. It gives me the below error.
"No MRP list exists"
This is a material just extended to a new plant with no stock. Is this issue because there is no stock for it and/or because its a newly extended material?
Same material in a different plant does give me the MRP list view when I run MD05.
let me know how it works.
Thanks
SAP Fans...Dhaval and All,
Thanks for the Response. I want to confirm one thing.
"MD05 is for displaying MRP Result.Once you run MRP for that material then only you will find the result in it unless you will find that " NO MRP list exists" message."
The above statement you made (no MRP list exists) is true only in the case of a newly created/extended material for which MRP was never run.
For material which already exists it would still show data in the MRP list from the last MRP run. Isnt it?
Let me know
Thanks
SAP Fans.... -
Hi All
Could you guys help me to solve out this issue will be grateful
In my client there are two plants, let us consider plant A & plant B. In both the plant we are running the MRP REGN job weekly with the parameter set-up as following.
Plant: Plant A.
Processing Key: NEUPL.
Create Purchase Req: 2 [Purchase Requisition in Opening Period].
Delivery Schedules: 3 [Schedule lines].
Create MRP List: 1 [MRP List].
Planning Mode: 2 [Re-explode BOM and routing].
Scheduling: 2 [Lead time scheduling and capacity planning].
Plant: Plant B.
Processing Key: NEUPL.
Create Purchase Req: 2 [Purchase Requisition in Opening Period].
Delivery Schedules: 3 [Schedule lines in the opening period].
Create MRP List: 1 [MRP List].
Planning Mode: 2 [Re-explode BOM and routing].
Scheduling: 2 [Lead time scheduling and capacity planning]
As per the above set-up we are facing a problem in REGEN job for PLANT A as, When ever the REGEN job runs, it kills all the open purchase req and recreates the purchase req with same qty for non account assigned requirements [Purchase Req].
In PLANT B- REGEN job is working fine as we expected like that, It wonu2019t kills the open purchase req.
My issue is PLANT-A whenever the MRP REGEN jobs,it should not kill the open purchase requisitions.
What are all the steps I need to proceed to avoid the killing of open purchase req and regeneration of new one with the every run.
Thanks in Adavance.Hi Rajesha Vittal,
We are running NETCH & NEUPL in our plant, so NETCH & NETPL are more are less same.
I am looking forward the solution to solve out the REGEN [NEUPL] issue.
Please help me..........
Thanks in Advance -
MRP List dispalys Old closed sales order
All,
After run MRP,stock and requirment list and MRP list displaying completed.closed sales order also.Please give suggestion how to rectify this issue.hi pl check wether the sales order stock has deliverd or not.
i mean wheter it has done PGI for SO
-ashok -
Time stamp in MRP list after MRP Run
Hi Gurus
After running a MD01-MRP at scope of planning level, with processing key as NETCH, materials which had no planning file entry also were updated with the latest executed MRP run time stamp in MRP List MD05.
Is it the standard behaviour? As per my understanding, the materials with no planning file relevant change is not included in the MRP run with processing key NETCH/NETPL. Then how does the time stamp be relevant for the latest MRP run while the material was never included in the mrp itself?
Regards
Deepak Prasanna SDear Deepak,
If my understanding is correct only if a mterial is included in the last MRP run(MD01/MDBT) then the time stamp gets included in the
MRP list which can be checked and confirmed through MD05 and also the output of last MRP run.
Once after the MRP run is completed the system deletes the corresponding planning file entries in the system.
On completion of the planning run, the appropriate indicator is automatically deleted in the planning file:
The system deletes the net change planning indicator and the net change planning horizon indicator for a regenerative planning
run and a net change planning run.
The system only deletes the net change planning horizon indicator for a net change planning run in the planning horizon.
Check and revert back.
Regards
Mangalraj.S -
Report for MRP list(MD05/MD06)
Hello,
I am looking for a Report that can give me the details of the MRP list(MD05 or MD06).
Basically I need the report to give me the following details.
Material Number
Material Description
Date
Opening Date
Rec/Reqd qty
MRP element
If you see all these fields are coming from the MRP list(MD06)
Is there a standard report or table that can give me this information.
Let me know
Thanks
SAP Fans....Hi,
Please check this link for the desired tables / structures:
Re: Tables in MD04 list
Regards,
Csaba
PS
http://www.sap-topjobs.com/SAPTABLEREF%5B1%5D.doc
Edited by: Csaba Szommer on Nov 17, 2008 5:07 PM -
Kindly suggest me if any standard report is available in which I can get the requirement of MRP ( Plant / Porg wise ) without considering the Open PO and stocks
hi
U can use MD04 or MD06 for reports on MRP list
Vishal.. -
Report RMMD07EX for collective MRP list
Hi all
I want to use the collective MRP list MD04 but by defining a range of plants and multiple MRP controllers at a time. SAP recommends using a report similar to RMMD07EX. This mimics MD07. Has anybody created a report for collective MRP list using MD04
thanksHow do you plan to switch from collective display to individual ? DO you plan to agregate some figures like stock for differents materials?
Have you tried the LIS, with transactions like MCBZ? This is collective Stock/ Reqmts List ! -
Hello,
Since our upgrade to GW 8 users can no longer administer Distribution Lists. I have created a new test list and made myself administrator to verify this. I can add the members to the list but when I save and close they are not added to the list. We are running 8.02 with most current build (91941)on agents and clients. Do I need to run some kind of PO repair?
Thanks in advance.Hmm, weird although I'm have a weird dist list issue also in that some are disappearing from users' address books. Sometimes they'll show back up if I refresh the address book from the system book but often not. I'll submit a new post on that one; it's possible they're related.
>>> csupers<[email protected]> 1/24/2011 7:06 AM >>>
These are all regular c/s connections, very few of our users (maybe 10)
using caching. We had implemented this before we went to 8 and it was
working fine, now it's broke.
David Hickok;2066477 Wrote:
> How are they trying to administer them? If your users are in caching
> mode, they need to use to address book applet. Otherwise, you'll
> experience the problem you described.
>
> >>> csupers<[email protected]> 12/1/2010 8:06 AM >>>
>
> Hello,
>
> Since our upgrade to GW 8 users can no longer administer Distribution
> Lists. I have created a new test list and made myself administrator to
> verify this. I can add the members to the list but when I save and
> close
> they are not added to the list. We are running 8.02 with most current
> build (91941)on agents and clients. Do I need to run some kind of PO
> repair?
>
> Thanks in advance.
>
>
> --
> csupers
> ------------------------------------------------------------------------
> csupers's Profile: 'View Profile: csupers - NOVELL FORUMS'
> (http://forums.novell.com/member.php?userid=1482)
> View this thread: 'Distribution List issue'
> (http://forums.novell.com/showthread.php?t=427148)
csupers
csupers's Profile: http://forums.novell.com/member.php?userid=1482
View this thread: http://forums.novell.com/showthread.php?t=427148 -
Hello All,
While accessing the MRP List (collective access MD06). There is a selection option for MRP Date. SAP Help tells that "Date: for example, all MRP lists that were created or processed within the last two weeks".
But I could not understand what this means. Please clarify this.
Regards
MaheshHi
It means that, the MRP list will be displayed only for those materials that were created in that time frame. There might be materials for which MRP is not run and processed within that time frame. they will not be displayed. This is one of the parameters for filtering the list.
Hope this is clear and helpful. If so please reward
Chandra -
Resolve error msg 26 In the Mrp list
Dear Gm,
How to resolve the below Error in the MRP list
26 Excess in Individual segment
Regards
Arun kumar Khi
always post the error message number to provide solution for the errors in quick manner -
Different Exception messages in MRP list & Stock Requirement List
Hello Experts,
When I run MRP and then look at the stock Requirement List & MRP list for the same material, I see different exception messages in these list.
I noticed that any of the exception messages in Exception group "7 - Exception during rescheduling" (ie, 10-reschedule in; 15-Reschedule Out; 20-cancel process; 30-plan process according to schedule) is not appearing in the stock requirement list even though they appear in the MRP list.
Does any configuration affect what message group can appear in Stock Requirement List & MRP list?
Please advice.
Regards
TomHi Tom,
For exception message - 62, just do the below checks -
Some of the reasons as to why you may find this exception message is because the backward scheduling can drive the start date in the past so far that:
- there is no valid BOM as of that date
- one or more of the work centers are not valid on that date
- there is no valid factory calendar on that date
Check the scheduling formulas in your work centers that are set up, and/or to specify for the material master a fixed lot or a max lot size so that planned orders result with realistic lot sizes.
Also you can set up MRP to only run on basic dates for your overall run, and to follow up with an MRP run which generates capacity planning only within the planning horizon, such as NETPL. You would need to configure the planning horizon so that it specifies a time frame over which capacity planning is to be done.
Also check the note : 88505 - Planned order upload generates exception message 62
In short, do a thorough check of the parameters maintained to ensure there is no inconsistency in the master data.
Check & revert.
Regards,
Vivek -
Dear All,
I am facing a unique problem in Trx MD05. Actually I run MRP through MDBT Trx on 01.07.09 but in MRP list (MD05) It is showing MRP list as of 03.07.09. How this can be possible?
Please share your views on this
Thanks & Regards
Kundan KumarHi Kundan,
STAD to trace combination of User and Tcode, but particular material its diffcult to trace in std sap.
If you want to trace then you need do some enhancements, create customized table (mateial number, plant, date, time, etc) for when user run the mrp in MD02 then save all data's to your own table.
I hope this will help to you
Regards,
Sankaran -
Tables in MRP list??
Hi Experts,
I need help to identify the tables from which the data is fetched when we run the MRP list transaction (MD05).
I need the tables from which the 'Request/Scheduled Qty' and 'Request scheduled date' are fetched.
My assumption is that the other datas like the MRP date is from the table 'MDKP-DSDAT' correct me if i am wrong.
Thanks,
ManjuHi Manju,
please check the below tables.
MDFD MRP firming date
MDFDDB Firming Data of MRP - MRP Area
MDHS Cluster Table BOMs Explosion (Shared Buffe
MDIP Material: MRP Profiles (Field Contents)
MDK_INVENTORY MDK Inventory Example - Data Table
MDKP Header Data for MRP Document
MDKPDB Header Data for MRP Document
MDLG Customizing: MRP Area Storage Location
MDLL Customizing: MRP Area Subcontractor
MDLV Customizing MRP Area
MDLW Customizing: MRP Area Plants
Award points if useful. -
Hello All,
In MRP List a schedule line is created with exception message 30. what does it mean?
(MRP type is P1 for the material).
There are requirements (for ex in 03.04.2008), but it is planned only on 05.05.2008 with rescheduling date 31.03.20008
( where as planning time fence ends on 08.02.2008 itself.)
what does the rescheduling date means?
thanks in advance.
ranjitHi,
when Mrp type is P1 then it is mps run ,and it will take the planning time fence that you have mentioned in material master record ,in that period whatever requirements are there those it will plan by considering the dates and it will make them as firm with the firming indicatodr as *
for those planned order only mrp controller is allowed to chage the planning values and no one can change those ,system automatically not going to change those firming indicator planned orders.
reward points if useful.
Maybe you are looking for
-
Does anyone know how to enable Bullets & Lists in Numbers 3.1? When I go to the "Inspector", i.e., Format --> Text, all the control components within the Bullets and Lists section are disabled (i.e., grayed-out). Does anyone know a way to enable the
-
Inter Customer Transfer with in same Company code
Hi experts. I am posting inter customer transaction Dr. one customer & Cr. another customer to transfer the Balance & to Make One customer balance should be zero. I am using T-code f-30 document type DA. ( I enable the document type to allow inter co
-
Hi all, I have a requirement to display a very large text(more than 40 characters) in header column of ALV grid. Is there any way out. Regards, Anurodh
-
I have a radio group as follows STATIC2:;Yes;No;No default is No the name is P1_MSD1 and the label is MSD LEVEL 1 BUILT. I simply want to change this to yes after a process runs. I am using select 'Yes' into :P1_MSD1 from dual; But it is not working,
-
Charger with serial number A1300 is not working for iPhone 5, is it?
I have an issue charging my new iPhone 5. I bought an extra cable - and they seem to both work when pluggin it into any computer. But one of my chargers will not work with it - but it works if I plugin my iPhone 4. How come? I noticed that the serial