MRP not Run

Dear All,
We have created material BOM using CS01 in AFS.Then We go to MD02 (AFS-MRP-Single item planning).That time no items coluld be run.the result shows NO MRP list found.Pls give the solution for this.
Regards,
Devi.G

Dear Deepa,
first of all You cannot Run MRP in MD02 for AFS materials
AFS has provided an additional t-code - /AFS/MD02
u can run MRP in the above said t-code
have u activated MRP for ur plant in OMDU or not
Plz check & revert back
Regards
kumar
Edited by: kumar kumar on Jul 8, 2009 3:18 PM

Similar Messages

  • MRP not running with MD01

    Hi Gurus,
    My client has a problem, MRP is running OK with MD02 and MD03 tansactions but no materials are planned when MRP is run through MD01at plant level.
    Can anybody throw some light what could be the problem?
    There is no error message either.
    Thanks in advance
    Shailesh

    Dear PP and QM
    I think there is a misunderstanding
    The reason why the materials are getting planned via MD02/MD03 is because here you are forcefully running the MRP for the material,System wont look for the planning file entry where as when run through MD01 system will check for planning file entry
    Just though to explain the reason behind such behavious, there is no intention to prove you wrong
    Shailesh
    Proceed as suggested by other expert,Even i feel that planning entry might be missing
    I'm not sure how the materials were uploaded in the system,if it is via BDC then you normally one setting is there(update planning file) if it is not done then planning file entry will not get created ,we have to create it manually
    Hope this helps !!
    Thanks
    SVP

  • MRP not running - Issue with Planning File

    Hi
    In MD06 - MRP List, I see MRP list last generated on 5/30/2008. There is a production order
    with requirements date of 3/27/2008 which has been met but is still showing up on the MRP List.
    The goods issue for the production order was posted on 7/30/2008. The goods receipt for the purchase order of material is posted on 5/6/2008
    IN the stock requirements screen (Transaction: MD04), there is no entry except the following:
    8/29/2008 Stock     Available Qty = 0
    There is no entry in the planning file for this material. We run MRP automatically in the night using MD01 and this is not cleraring up the MD06 - MRP list.
    Why was not the planning file entry generated?
    How do i resolve this issue?
    Please help.
    Ketan

    Hi,
    It is perfectly ok for not having the planning file entry for this Material.
    Create a PIR for this Material now, and acheck whether system will creates the planning File entry or not..
    Inspite of having the Demand for the Material, when there is no planning file entry is a problem..
    But, every time there will not be a Planning file file entry, unless there is a change with reference to the Planning..
    Regards,
    Siva

  • MRP Not Running on Subcontracting Material

    Hi All,
    I have done the following :-
    Created a SUBCON Component with all the correct views, procurement type 30 etc.
    Created a RAW Material again with all the correct views.
    Created a BOM for the Above.
    Created Subcont PIR for SUBCON Material
    Created Standard PIR for RAW Materal.
    Sourcelist for both.
    When I create a PO ME21N i can see the BOM explosion etc so Subcon works fine.
    The problem is if i want to maintian safety stocks for the SUBCON Component and run MRP it doesn't generate any Planned Orders/Purchase Reqs?
    Why is that?
    If i maintain safety stock for the RAW Material and run MRP it generates me reqs which is correct but why doesnt it do the same for SUBCON Material?
    Thanks

    Hi,
    Issue Resolved,
    I removed forward consumption and backwards consumption and MRP is working now.
    Forward and backward consumption has nothing to do with safety stock level. MRP will plan with your safety stock even if you write values in those fields.
    Forward and backward consumption comes into picture when you want to set the system how SOs should consume PIRs.
    So, I do not think you fully described your original situation since merely setting forwar/backward consumption periods to zero cannot solve this issue as per my best knowledge. I've tested the same and those fields have no effect on how MRP considers safety stock.
    BR
    Csaba

  • Not running MRP but has Purch Req with Sales Order as pegged reqmnt in AFS

    Hello Gurus!
    MRP run is activated in the Plant but we do not run MRP (no MRP batch job nor manual MRP). However, there are materials that have Purch Reqs with creation indicator as MRP showing pegged reqmnt from Sales Order even if Item category is the same.
    My initial check shows that those materials with issue has MRP Indicator as BLANK(Multi-level, transaction dependent MRP) and those that do not generate Purch Req from SOs has N(No transaction-dependent MRP). However, transaction dependent MRP is not activated.
    Can you provide areas where I should check/other probable cause of this?
    Your valuable insights is deeply appreciated. Thanks!

    Hello?
    I just want to update how this was resolved.
    I found out that MRP Indicator field in AFS MRP view for the materials with MRP generated Purch Reqs is maintained as BLANK(Multi-level, transaction dependent MRP) in AFS MRP view instead of N(No transaction-dependent MRP) but there is no transaction group maintained. So MRP run is triggered whenevert there is MRP relevant transactions performed.

  • MRP is running daily but not in MDBT

    Dear Guru,
    In my system, MRP is running daily but I am not able to find out in MDBT. Is there any othe way for automatic mrp run? Please reply.
    Thanks in advance.....
    Regards,
    Raj.

    Hi,
    2 things you can do:
    1. Ask your system admin or basis consultant
    2. Go to SM37, specify
    for Job name & user name. Set the job status as finished, specify the date interval say today until a week ago & in the Abap program specify RMMRP000 & execute. The output will list all MRP jobs defined & this should clarify.
    Regards,
    Vivek

  • MRP is running in MD03 and not in MD03

    Hi all
    The MRP is running well in our MD03 T code, but same time we cant do the same in MD01. Let me have the reason.
    Basically we have the user exit parameters is implemented, this is running well in our other plant. There is no authorisation message about this. Totally we are searching for scrap

    Thenna,
    MDAB will indeed create new Planning file entries en masse.
    In addition, it is always a good idea to periodically run MDRE to repair any inconsistancies in the planning file.
    Some companies run these two programs in batch regularly, say every week or so.
    Rgds,
    DB49

  • MRP run details(date and time when MRP was run)

    Hello,
    I need time stamps of all MRP/MPS run for a particular material. Please let me know relevant T.code/FM/BADI.

    Dear
    One more way to find this is using Transection Code AUT10.
    Here you can find not only Last MRP date but some other useful data also like user, date ,time and so many.
    Try it by using T.Code like MD01, MD02, MD40 etc.
    Or goto se16-SAP Table MDKP-Here you will get MRP run details
    Hope this helps
    Regards
    JH

  • MRP Forecasting Run

    Hi Gurus,
    Need your expert advice on one of our issues.
    We have a requirement that AMC should be taken for the past 6 months regardless if there is any usage or not. Standard behaviour is that during MRP Forecasting run, zero values in the earlier historical values are not taken into account.
    For instance forecast period is set to '6' however, only last period has a value of 19.17 and others are zero in the historical data.
    When we execute the forecast run system actually considers as 1 month even if we defined 6 month.
    If standard SAP doesn't  cater for the above,  is there a  way to twig the system to achieve the above objective? If yes, how can this address the zero usage and can it be restricted for a specific group of users?
    Thanks.
    J&J

    Dear Poster
    You have created a thread in the SRM (Supplier Relationship Management) area, is this correct? The issue reported seems like it should belong to an ERP or similar forum? Let us know of this issue refers at all to SMR_SERVER and we can proceed with assistance otherwise I will move your thread to a  more suitable forum if SRM is not your issue!
    Regards,
    Jason

  • Generate Delivery Schedules via MRP Planning run

    The company wants to create Scheduling Agreements and generate the Delivery Schedules from the MRP Planning run - MRP 2 view via JIT.
    Can you generate Delivery Schedules from Schedule Agreements if the company does not have an EDI server or APO set up?
    Thanks,

    Shirley Globe,
    You seem to be putting the experts to the test.
    As it was told you, you can generate schedule lines via MRP run. MRP run can be done (e.g.) trough MD01 /MD02 / MD03. Of course, you have to use the proper selection parameters to achieve your goal.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d2da044af11d182b40000e829fbfe/frameset.htm
    As for how to use SA with MRP please check SAP online help:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/3b/66596eda7b11d1b6330000e8a738dc/frameset.htm
    Regards,
    Csaba
    Edited by: Csaba Szommer on Apr 9, 2009 7:40 PM

  • SAPOSCOL not running in MS Cluster

    Hi, gurus:
    We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
    Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
    But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
    iinterval             0             sec.
    Collector Version:
    Date/time             05.09.2008 16:55:01
    Start of Collector
    Status report
    Collector Versions                         
      running                                   COLL 20.95     700     - 20.64     NT 07/10/17
      dialog                                   COLL 20.95     700     - 20.65     NT 08/02/06
    Shared Memory                              attached
    Number of records                         575
    Active Flag                              active     (01)
    Operating System                         Windows NT     5.2.3790 SP     2 BL-SAP2 4x AMD64 Level 1
    Collector PID                              0 (00000000)
    Collector                                   not running (process ID not found).
    Start time coll.                              Thu Jan 01     01:00:00 1970
    Current     Time                              Fri Sep 05     16:55:01 2008
    Last write access                         Mon Sep 01     11:28:23 2008
    Last Read  Access                         Fri Sep 05     15:54:00 2008
    Collection Interval                         10     sec     (next delay).
    Collection Interval                         10     sec     (last ).
    Status                                   read
    Collect     Details                         required
    Refresh                                   required
    Header Extention Structure                    
    Number of x-header          Records          1
    Number of Communication     Records          60
    Number of free Com.          Records          60
    Resulting offset to     1.data rec.               61
    Trace level                                   3
    Collector in IDLE -     mode ?               NO
      become idle after     300     sec     without     read access.|
      Length of     Idle Interval                    60     sec
      Length of     norm.Interval                    10     sec
    But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
    We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
    F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
    This log remain frozen at September 1st:
          SAPOSCOL version  COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
          compiled at   Feb  3 2008
          systemid      562 (PC with Windows NT)
          relno         7000
          patch text    COLL 20.95 700 - 20.64 NT 07/10/17
          patchno       146
          intno         20050900
          running on    BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
    12:04:16 01.09.2008   LOG: Profile          : no profile used
    12:04:16 01.09.2008   LOG: Saposcol Version  : [COLL 20.95 700 - 20.64 NT 07/10/17]
    12:04:16 01.09.2008   LOG: Working directory : C:\WINDOWS\SAPCLU~1
    12:04:16 01.09.2008   LOG: Allocate Counter Buffer [10000 Bytes]
    12:04:16 01.09.2008   LOG: Allocate Instance Buffer [10000 Bytes]
    12:04:17 01.09.2008   LOG: Shared Memory Size: 71898.
    12:04:17 01.09.2008   LOG: Connected to existing shared memory.
    12:04:17 01.09.2008   LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
    12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
    12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
    Kernel Info:
    Kernel release    700
    Compilation        NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    Sup.Pkg lvl.       146
    ABAP Load       1563
    CUA load           30
    Mode                opt
    Can anyone shed some light on the subject?
    Thank you very much and kind regards
    Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AM

    Dear bhaskar:
    Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
    Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
    Does anyone knows if a reboot has solved this kind of problem in a similar situation?
    Thanks in advance
    José Enrique

  • HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

  • When KM Scheduler is stopped or not running

    Hi Experts,
    I have created KM Scheduler using the blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515.Scheduled for every 30 mins.
    In Systemadmin>Monitor> KM-->i can see whether Scheduler is running or not.
    Now the requirement is to send a mail to the portal support team when Scheduler is stopped or not running. Is it possible?and how we can proceed?
    Please guide me.
    Sony.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • KM Scheduler Task is not running...

    Dear All,
    I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
    The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks.  but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
    Do i need to configure anything to run KM scheduler Task?
    Thanks and Regards,
    JAGAN.
    Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

    Hi Jagan,
    The status "0" for your task in "Component Monitor" is fine.
    Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
    Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
    In you task folder, you will see "Service Folder"  under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
    Name : http://sapportals.com/xmlns/cm/sch
    Value: Value1
    Also make sure in your portalapp.xml, the values are same:
    RFServiceWrapper
    service-config
    className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
    startup= true
    service-profile
    Name= = http://sapportals.com/xmlns/sch
    Prof= Value1
    You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
    You can use any other name but the it should be same in both the places.
    Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
    Kind Regards,
    Poornima

  • Why will firefox not start on my laptop? can't uninstall or open the profile manager either. it simply does not run. it used to work fine until i had to restore my system.

    had firefox 4.0 & have been a user of firefox for a few years now. never had any problems. had to do a system restore after my computer detected a virus of some sort & i couldn't do anything. the virus kept popping up a bogus add for me to buy an antivirus program. had to restart laptop in safemode to initiate the restore. ever since then firefox has not opened. can't even uninstall it or open the profile manager. anything that has to do with firefox will simply not run/open at all. i'm stumped.

    System restore can cause problems as well as solve them, it has probably completely mucked up your Firefox installation.
    Try deleting your Firefox installation directory, the default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
    Now re-install Firefox, it should pick up your current profile folder so you should not lose your bookmarks, passwords etc.

Maybe you are looking for