MRP PER CBB AND MRP PER ATC

I WANT THE EXPANSION FOR CBB AND ATC IN CIN

Hi all
i got solution from my issue , as above given MRP per unit value picking from MRP per case value,
here if MRP per unit value is more than 3 digits(ex: 1000 rs/-) then value not appearing in excise invoice ,for this my ABAP r has done program variant changes for numeric length increased for MRP per unit field
thank you to G Lakshmipathi and Ashok Kumar Telugu for spending your valuable time on this issue .

Similar Messages

How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform
I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I have acquired by NI DAQ card, tks!
owen wan
Attachments:
Untitled 1.vi ‏2333 KB

Look inside the palette called Signal Processing - Waveform measurements. There are a lot of functions here that you can use to get the information you desire. For instance, the Extract Tones function will output an array of clusters, with each cluster element giving the frequency, amplitude, and phase of the signal component. Go through the entire arry to see each frequency component of the complex waveform.
Also, in the Waveforms palette there is the Get Waveform Components function that will give you t0, dt, and Y components of the waveform. 1/dt should give you the sample rate. See attached VI.
- tbob
Inventor of the WORM Global
Attachments:
WfmInfo.vi ‏4658 KB

Minimum stock level per warehouse and MRP

Hello experts
We have tested minimum stock level per warehouse and try to use it for the MRP but it seems that the MRP uses for a specific warehouse the consolidated minimum level
For example
WSE 1 minimum stock level 10
WSE 2 minimum stock level 5
MRP runs for WSE 2 recommandation is calculated based on 15 pieces of minimum stock level (WSE 1+2)
Could you please tell me if this is normal behavior and the use of minimum stock level per warehouse is not possible ?

Hi.....
SAP gives recomendation on Overall stock basis and not on Minimum Inventory of Particular Warehouse.
It is standard behavior. But SAP should think of it as it is not right recomendation if someone tries to view it as per warehouse.......
Regards,
Rahul

Loading lib per object and not per class possible?

Hello, I have a problem with JNI and some libs I want to use.
On the Java side I have a class called FeedController that uses a class SenderJNI to communicate with a native lib, that implements the interface of SenderJNI. I have several native libs that all have different implementations of the interfaces.
What I want to do is to load a specific native lib for a specific SenderJNI object. I thought it could work with the following code.
public class SenderJNI {
     public native void init(String host, int port, String streamname);
     public native void send(String csvString);
     public native void close();
     public SenderJNI(String libName) {
           Runtime.getRuntime().load(libName);
}The problem I've encountered is, that loading libA.so for SenderJNI object A works fine, but if I want to load libB.so for SenderJNI object B, I still get the implementation of libA.so. So loading seems to be on a class based level.
Is there any way to load those two libs for different SenderJNI objects?

This might work.
Load all three libraries in your SenderJNI. Create three sub classes of your SenderJNI java class. They can just be stubs that dont implement anything.
Implement the native methods just once between the three libraries.
In your navtive methods, use IsAssignableFrom to determine which instance of the class was used, and call the proper library function based on the instance type that the call originated from.
jboolean IsAssignableFrom(JNIEnv *env, jclass clazz1,jclass clazz2);

Samples and cylcles per buffer

Hi. I am trying to use Daqmx to generate a sine wave and the use displacement sensors to measure the oscillations of a piezo. The problem that I am having is that the output sine wave stops changing after somewhere around 2kHz. Below 2kHz everything looks good. I am using an oscilloscope to measure the output frequency. At higher frequencies the frequency remains the same for a long period and then changes instead of changing when the code tells it to change. When I measure the Q curve of the piezo I am getting a step ladder instead of a smooth curve. I believe this has something to do with my cycles per buffer and samples per buffer but I am not sure. I have included the vi and the waveform generation vi that I am using. Please let me know what I am doing wrong.
Attachments:
Waveform Generation21.vi ‏38 KB
Dual RLP Phase & Deflection (sweep)1.vi ‏807 KB

I can't look at this because your version is too new. However I have
tried to code something very similar. The problem I encountered was
this: You can only set the sampling frequency to certain values (an
integer divided into the clock frequency) and the number of samples per
cycle is obviously an integer. So you cannot sweep the frequency with
arbitrarily fine increments. indeed figuring out how to sweep it is not
trivial as it may involve changing both the number of points per cycle
AND the clock divisor.
As a start you should probably decrease the number of points per cycle.
(Note that if you set the sampling rate DAQmx will round to a legal
value if necessary. If you need to know the actual sampling rate use a
property node to read it.)

How can i save job settings in Capture Perfect per computer and not only per user?

Hi
I got a production computer with capture perfect 3.0
Is there a version where the job settings are saved per computer and not per user?
This is a problem when i am creating scanner jobs everybody on the computer should be able to use.
TJ

I'm having the same problem and I use the built-in camera app. I have and iphone 4 and my friend uses and iphone 4s and his saves as JPEG. Mine saves as png. How can I get mine to save as JPEG?

MRP auto creating and batching releases

Using standard functionality it's possible for standard Oracle processes to automatically create PO Releases within the Release_Time_Fence_Days. We want to use this functionality, but, the answer it provided was inappropriate.
The main issue is that if there are two MRP Planned Orders for different days and the Delivery Calendar indicates that they will both be delivered on the same day, the result is that two PO Releases are generated rather than one?
This makes it difficult for the Receiving staff who would have to book material in against different releases; doubly awkward if the material was delivered all at the same time.
Does anyone know of a way to sum/group the releases at all (by vendor/part/dock date)?
Regards,
Bren

Dear
Are you dealing with Single vendor where you want Multiple Schedule Line item through single PR which should be generated through MRP run ??
What you will have to do is to set up the Outline Agreement or Info Record for your vendor and material and then create the source record for this vendor- material relationship and make sure that this source record is set as MRP relevant. Once MRP is run, the vendor is automatically defaulted to your PRs. If in your material master, you have defined the same purchasing group for various material numbers, then with Transaction ME59, it is feasible that you can combine various PRs of the same purchasing group by flagging onto the 'Per Purchasing Group' indicator checkbox. Make a trial test and let me know how it goes.
Or you can use Qouta arrabgement in that case for different vendor .Please refer : Multiple Requisition line itme for Quota arrangement
Just check and revert
regards
JH
Edited by: Jiaul Haque on Dec 25, 2010 1:52 PM

Tables relevant to MRP, MD04 tcode and stock related tcodes

Hello gurus,
             table related to STOCK, MRP, AVAILAIBILYT CHECK AND TOR, MD04 Tcode
Thanks in advance
Sameer

hi
for stcok
MARC, MARD,
MSKA     Sales Order Stock
MSKAH     Sales Order Stock: History
for MRP
MDIP     Material: MRP Profiles (Field Contents)
MDKP     Header Data for MRP Document
MDKPDB     Header Data for MRP Document
MDLG     Customizing: MRP Area Storage Location
MDLL     Customizing: MRP Area Subcontractor
MDLV     Customizing MRP Area
MDLW     Customizing: MRP Area Plants
MDMA     MRP Area for Material
availabilyt check
TMVF     Availability Check Control
TMVFP     Availability Check: Blocks
TMVFT     Availability check control: Texts
TMVFU     Scope of Availability Check (Default Values)
TMW00     MRP Default Values per Material Type
for MD04
VBBE     Sales Requirements: Individual Records
VBBS     Sales Requirement Totals Record
UMD04     Default Values for Planning Table in Repetitive Mfg

MPS and MRP question

Hi all,
There are two kinds of planning run (i.e. MPS and MRP). I have few questions on this.
1 - Do I need to setup two background jobs, one for MPS job, and another follow by MRP job, in the system?
2 - Can I just run MPS using MD40 (total MPS run) without perform MRP run (i.e. using any of the MD02)?
3 - Does MPS ONLY plan one level only? in another word, all the second level onward will require another separate MRP run to show all the subsequent level dependent requirement?
4 - if there is one FG, and it has 2nd level of semi-FG bom compenent, the semi-FG has another level of semi-FG and subseuqently Raw material level. In this kind of scenario with many level, it is good practise and it SHOULD use MPS to first plan for the first level FG? and later subsquent level use MRP to plan? Am I correct?
thanks.
tuffy

Hi,
No,
You can MD40 and then MD02
Usually Only those materials which affect companies profit will be taken for MPS, hence few materials will be available for A importance, so you run level by level for MPS, rest will run under MD02, it depends on the business process.
When running MRP using transaction MD02 and MD41, what the difference should be?
There is no difference in the processing logic as such. The only difference is that MPS only acts on materials with an MRP type relevant to MPS (e.g. M0, M1, etc...), and MRP acts on materials with an MRP type relevant to MRP (e.g. PD). How the materials are processed is exactly the same.
This functionality allows you to run MRP for 2 sets of materials separately (and with a different frequency).
For example, some businesses may do planning for their finished goods once per week, but would want to run MRP for their
components daily (although this is generally not necessary with SAP). So, for this example, you would define all finished goods with an MRP type relevant for MPS, and all components with an MRP relevant.
Basically, MPS is a form of MRP that concentrates planning on parts or products that greatly influence the company profits or those that require critical resources. Items marked as master schedule items can be finished goods, assemblies or raw materials. These items are selected for separate MPS run that takes place before the MRP planning run. MPS run is executed without any BOM explosion. This is to allow the MRP controller to ensure that the master schedule items are correctly planned before any detailed MRP run take place.
As you can see, there are not too differences if you review MRP and MPS isolated, but lets think the BIG PICTURE, and can find the difference is just an procedure stuff:
1: RUN MPS (tcode: MD40). SAP do the planning run multilevel, also considering the MRP materials.
2: Do the the necesary MANUAL changes in your MPS materials Planned Orders, remember that the planning run is "JUST AN ADVICE" and never can replace the human decision. Here, you have your MPS Plan, and also the consumtion Plan (dependant requirements)
3: Then, with the dependant requirements OK (acording to MPS's Materials Planned Orders), do MRP RUN (tcode: MD01). The MRP run dont change the MPS plan.
The idea of MPS and MRP is to "separate" materials, in order you can run "masive process" in order. The algorith of mps and mrp are the same. Both work with the PlanTime Fences and Fixation types, rescheduling is the same, and so on.

Inventory report for the selection of requisitioner and MRP controller

Hello Experts,
Can someone please help me with a standard Inventory report in which we can give input thr requistioner and MRP controller
regards,
YK

Hi,
You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
Regards,
Rakesh

What is table field name for order status report of rate per unit and bal

hi i want to make FS for order status report i almost get all table and field but i don't get only two field rate per unit and balance value table field didn't get please help me searching in field and table
i want to develop my status report

Hi,
Check tables VBAK and VBAP wherein you will get all header and item details.
VBUK and VBUP for header and line item statuses.
KONV would give you rates/pricing details for each condition type determines in the sales order.
VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
Hope that helps.
Regards,
Amit

Dunning - Interest and Fee per Letter

I have set up interest and fee per letter in the Dunning Terms and when I run the Dunning Wizard I see these amounts for each of the Business Partners Invoices. Where I am having an issue is getting these values to be displayed in the PLD, are these variable fields - if so what is the variable number, if they are database fields - then which table and column are they?
Thanks,
Richard

Found the template, it was at level 3 that there is interest calculated. Why wasn't it included for all dunning levels?

Optimize Performance in getting Quantity of Open PO per Material and Plant

Hi,
Recently I have a project that requires me to get the quantity of the open Purchase Orders (no Goods Reciept yet). The current code I have to get this are as follows (with some alterations):
<b>select MATNR WERKS MENGE
from EKPO into table i_purchase
for all entries in i_tab
where MATNR = i_tab-MATNR
   and WERKS = i_tab-WERKS
   and ELIKZ = space.
loop at i_tab.
       loop at i_purchase where matnr = i_tab-matnr
                                      and werks = i_tab-werks.
           i_tab-menge = i_tab-menge + i_purchase-menge.
       endloop.
modify i_tab.
clear i_tab.
endloop.</b>
Now there is nothing wrong with the program here its just that the user I know would tend to proccess a large number of materials per report and would cause a <b>Time Out</b> because of the data being proccessed. It also needs to be run online so background processing is out of the question.
Question is, is there a better way where I can get the same results with a better performance and possible avoiding the same time out again (i.e. other database tables, improved logic, coding impmlementation, etc.) ?
Hope to hear from you soon.
Take care and good day.

Hi,
Try this:
IN select stmt:
1. use select statement validating i_tab. like:
if i_tab is not initial.
select MATNR WERKS MENGE
from EKPO into table i_purchase
for all entries in i_tab
where MATNR = i_tab-MATNR
and WERKS = i_tab-WERKS
and ELIKZ = space.
endif.
2. Chk this possiblility: do not add elikz = space condition into wyhere clause of select stmt and remove unwated entries from i_tab using DELETE i_tab where elikz =ne space. this will surely improve performance of select stmt as elikz is not a key field. but this chk once.
In LOOP:
1. donot use loop stmt insterasd use read table stmt for that sort itab with fields MATNR WERKS. and then use BINARY SEARCH in thi s clause. using bs will improver ur prg perfromance drastically.
2. instead of loop at itab use field symbol this is also very help ful. but try above oprtion and then go for it... any way loop with fs is better than loop at itab .
Hope this will help u.
Jogdand M B

How many users per country and their names and cities in abap ?

Hi,
i want to build a list of my users on PRD per country and their names in an abap programm.
Do you have any code for that ! Will be pleased to hear from you.
Thanks
Kumar
Moderator Message: You might be a Basis chap, but that doesn't mean we will do your work for you. Take the help of a ABAPer and get it done.
Edited by: kishan P on Nov 21, 2010 6:42 PM

Hi,
i am just looking for an abap code as i am not a developer. I am a basis chap, i searched in sapnet, but nothing of the sort i am looking for. All RSUSRXXX reports are of general nature. Will be pleased to hear from ABAPERS or basis guyes who have
faced this problem and solved.
Thanks in adv.
Kumar/Germany

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

MRP PER CBB AND MRP PER ATC

Similar Messages

Maybe you are looking for