Mrp per unit filed in excise invoice not showing value

Hi,
in excise invoice print mrp per unit value not showing, to find solution what process i need to follow
please find attachment for screen shot.
regards,
sivakoti.

Hi all
i got solution from my issue , as above given MRP per unit value picking from MRP per case value,
here if MRP per unit value is more than 3 digits(ex: 1000 rs/-) then value not appearing in excise invoice ,for this my ABAP r has done program variant changes for numeric length increased for MRP per unit field
thank you to G Lakshmipathi and Ashok Kumar Telugu for spending your valuable time on this issue .

Similar Messages

Solutiom for EXCISE INVOICE NOT CREATEED FOR THIS DOCUMENT

hi,
wlhile i want print preview in transaction VF03/VF02 for a particular biiling document number , i get the error message "EXCISE INVOICE NOT CREATEED FOR THIS DOCUMENT" .what is the solution?

HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .-- MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight - MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta

Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?

Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?
1.At the Time of MIGO,In Excise Invoice tab SECess Hide in reight side of the Screen
2. At the time of J1IEX, Complete Input Excise SECess Line item is not appere in screen
Please give the solution
Regards
Maran

Hi,
Please check following :
1. Whether the AT1 indicator is active for Excise Registration number under CIN customizing
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations
2. Whether the AT1 condition is maintained in Maintain Excise Defaults against tax procedure
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
3. Whether the AT1 condition is maintained in Specify Excise Accounts per Excise Transaction against excise transaction type
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction
4. Whether the AT1 G/L account is maintained in Specify G/L Accounts per Excise Transaction
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction
5. Check whether in condition for AT1 is maintained in FV11.
6. Check whether AT1 setoff percentage is maintained (this is applicable only in case you maintain setoff conditions).
7. Check whether AT1 percentage is maintained in conditions tab of Purchase Order.
8. Check whether tax code is maintained in FV11 for AT1 condition maintained.
Please check and revert in case of any clarifications.
Regards,
Tejas

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Excise Invoice Not creating automatically

Hello!
while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
-M.Suba

Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
Check Customization settings-
IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
select your excise group & choose details,
You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
Regards,
Reazuddin MD

Reversal ARE1, But Excise Invoice not Cancelled "Y"

Hi
Gurus,
Actually i Reversed ARE1, After that while am trying to cancel (J1IH) Excise Invoice Its showing below message
Reference of 0000000063/2007 exists in open ARE document.
Message no. 4F235
here 0000000063 is the Excise Invoice No.
Pl reply ASAP
Its very urgent Issue
Anil

Hi
Apply Note 765028.
Thanks
Krishna.

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

F4 not showing values for Variable

Hi Everyone,
In BEx Web analyzer, the one of variable not showing values after pressing F4 but for the same query if we execute in BEx analyzer it shows the variable values.
How we can rectify this issue for BEx Web Analyzer?
Please suggest..
Thanks
Kind Regards
Anukul

Hi,
Just check following setting are also done.
transaction RSA1 -> Query-infoprovider -> "display" -> look for the relevant infoobject -> right-mouse-click -> "provider-specific Properties" -> "Query Exec. FilterVal"
Set this option to "Master Data" and recheck the behaviour.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
If above doesn't help pl check for sap note.
Thanks and regards

Excise Invoice not getting printed directly.

Hi ;
Our client earlier using J1Ip with sp01 for printing excise invoices.
As per new requirement through J1IP only direct printing is required so that there is no need to go SP01.
I have using print immediately setting in VF02. As well as VV31 also maintained.
Still system is genearting spool request & need to go to Sp01 to print the invoice.
Can somebody help me in this regards;
Thanks;
Anita

Hi
Anita
As told by u everthing is corect. Please check the SAP LPD is getting open or not while u firing print out ? Please load lpd files again.
Hope this will help u.

Excise invoice not getting converted into INR from USD for an IMPORT PO

Hi All
I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
For Excise invoice , CVD is getting captured but in excise tab, base amount is showing in INR and currency also shows INR which is correct.
Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
For example:--
PO value shows
Base Price - 2040.20   USD
Custome   -     204.20    USD
CVD         -      179.54    USD
Cess on CVD      3.59    USD
H Cess on CVd 22.44 USD
Now in excise invoice in Excise item tab
Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
BED -   179.54 INR
CESS - 3.59 INR
HECESS 22.44 INR
Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
Can any one suggest what to do to correct this.
Regds
Mukta
Customization for CVD maintained in Excise config -- company code setting- exchange rate type for CVD is M.
OB08 maintained for USD to INR for the current date.

HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .--   MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta

Cancellation of excise invoice not possible

Hi
I am trying to cancel the a sales excise invoice
In tcode J!IH > cancel excise invoice, the system is giving an error
Excise modvat accounts not defined for CEIV transaction and excise group
Kindly provide solution for this
Regards
Suresh

If you face the above error, you need to check only in two places. One is already suggested and the other is LG => Tax on Goods Movements => India => Account Determination => Specify Excise Accounts per Excise Transaction. There ensure that following are maintained
CEIV          CR Credit     MSUSP CENVAT suspense account
CEIV          DR Debit     PLAAED PLA AED account
CEIV          DR Debit     PLABED PLA BED account
CEIV          DR Debit     PLASED PLA SED account
CEIV          DR Debit     RG23AED RG 23 AED account
CEIV          DR Debit     RG23AT1 RG 23 AT1 Account
CEIV          DR Debit     RG23BED RG 23 BED account
CEIV          DR Debit     RG23ECS RG 23 ECS Account
CEIV          DR Debit     RG23SED RG 23 SED account
thanks
G. Lakshmipathi

Excise Invoice not getting Cancelled

Dear Gurus,
I am facing a problem in canceling the Excise Invoice as it is giving an error that FI/CO Interface: Update call without successful check.
please help.
Thanks in Advance
Ameet Singh

Maintain the Cancellation Excise Invoice Type CEIV in IMG path Logistics-General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction. Also ensure that the respective G/L account is assigned in the next tab.
G. Lakshmipathi

Excise invoice not generating

Dear all,
I have created an order, delivery and billing document. Billing doc has been released to accounting. However though the accounting doc has been generated, the excise invoice is not generated.
Plz help me what cud be the reason for that.
thanks

Dear bvdv,
I have checked that as well but it is showing:
"Document not found. Excise posting not done or document is archived"
and in J1iin it is showing as
"Modvat utilization done already for <billing doc> of Delivery <delivery doc no.>"
Very contradictory statements.
Thanks
Sapshed

Excise invoice not capturing during migo?

when I tried to capture the excise invoice during Migo. I am unable to select the capture only option. it is automatically selecting "refer only excise invoice"? how to solve this problem.

Dear,
I think you have not maintain Excise data
T.code
J1ID - Excise rate maintenance
Maintain Chapter Id,
Maintain Mateial & Chapter id combination.
CENVET Determination (If material is CENVETABLE)
Vendor Excise Detail
Excise Tax Rate.
Hope above will useful.
GOPAN.

Mrp per unit filed in excise invoice not showing value

Similar Messages

Maybe you are looking for