Mrp problem of articles

hi,
i want to find all those article which are same before '-' sign but are differ in MRP. For my program i am using MARA,MAKT,KONP,A504 tables.i am getting all the prices with their material but i am not getting those articles which are same but differ in MRP.here i am giving example what i am trying to do:--
POP/FS-10-40         600.00           "till first - sign articles are same but has different MRP
POP/FS-10-42        1113.00
POP/FS-10-44        700.00
POP/FS-24-39        1,199.00
thanx/regards,
vaneet thakur

Dear Amol,
the date shown is the ultimate reciet date and not start date.
Since you have already converted PR into schedule lines you will not be able to see the actual start date.
If it was still a PR you can see the release date as planed delivery time days early.
If the requirements date was say 31/05/2009 and you were taking planning run today then the recieved date would come as 05/06/2009.that is 14 days from today.
if requirement well beyond planned delivery time then the planned delivery time will not reflect in recipt date.

Similar Messages

Very strange MRP Problem

HI ALL
I am having a very strange mrp problem and that is
I created a material with all mrp1and mrp2 requirement,created the info record and source list for that material.I created a reservation for that material which in turn created the deficiency when I did the MD04.I run the MD03,as per re-order point and fix lot size two Preqs created( vendor was not shown in the Preqs even though I established the source list for the material?).I change these Preqs into PurOrds and did the Gr.Every thing fine till here all changes happened in material requirement list(MD04).Now I did one more reservation and created the deficiency again and run MD03 again with a message that mrp done but this time when I went back and checked MD04, there is no Preqs shown and deficiency remained same as was before. I did the same exercise on several material and every time I am having the same problem as the 2nd time the Preqs don't show in MD04. Please help me as I check upto my knowledge but unable to resolve this one.

what is the control parameter of the MRP run that you select.

MRP Problem

Hi Expert,
I got problem in my MD01, in my plant parameter is set up like this CREAT PURCHASE REQ. 2 and SCHEDULE LINES 2, and my material is a RAW, with MRP type set up as PD, and PROCUREMENT is F, why does when i check in mD04 there are planned order for my RAW material since raw is externally procurred it must be PURCHASE REQ should appear? please explain this to me, what should i do?
Thanks and Regards,

Hi,
Based on the Opening period defined at Schedule margin Key of Material , MRP will creates PR & Planned order.
During the backward scheduling system calcualtes the Opening date by subtracting openning period ( the Number days defined at SMK as openning period ) from release date.
If Requirements date is earlier than the Opening period system will create planned order .
some time is there to convert it to PR.
If requirement date later than the openning period it will cretae PR directly.
Set create pur req = 1 at md01 sytem will create PR always.
Regards
Pradeep

MTO Process MRP Problem

Hi,
i am working in MTO Process. Bill of material all Created. MRP Run. after some material added in bill of material . second time MRP RUN.Plant order not created for second added material.
what is the problem .
plz, Advise me.
Regards,
JJ

Hi Uday,
New material maintained for MRP View. and Check it .first mRP running and Added the New material.second time MRP run .
But not Plant Order created.
Edited by: JayamJevan s on Jul 16, 2009 1:50 PM

RP CONFIG & RP RUN (MRP) FOR DC articles

could you pls guide me for the config of RP(MRP) for articles relevant to DC?
which rp type to be used for DC?
and will be thankful if i am getting complete business process with config.

Hi,
For DC, you may want to use RP or RF.
RP with reorder point and target qty.
RF with forecast based on consumption values on period indicator with target coverage and plan delivery time as well as source of supply with purchase group and forecast model.

MRP problem in case of MD51

Hi,
I have not activated MRP in OMDU tcode. So at the time of MRP run I should get error that "Requirements planning is not active in plant XXXX" but in case of tcode MD51 this is not the case.
When I am running MRP for WBS element using MD51, I am getting planned order for a header material assigned but at the same time let me tell you, system is not exploding BOM for the same.
My concern is in case of deactivated MRP for that plant why system is not giving error and allowing me to run MRP using MD51..??

Hi,
Go to se16 enter the table J_1IRGSUM and Check the material quantity available.
Regards,
Chetan

MRP - Problem in scheduling of MRP created schedule lines

Hi,
I am working with single level BOM of FG and trying to generate Schedule lines for RM as per requirement coming from FG - BOM explosion during MRP run -
Material master setting of RM is as below -
MRP type - PD,
Lot Size - Ex,
Procurement type - F,
Planned dlv time - 14 days
i am getting dependent requirement as below -
06.07.2009 - 2000 EA
13.07.2009 - 1500 EA
01.08.2008 - 1000 EA
And schedule lines are generated as below -
06.07.2009 - 2000 EA
13.07.2009 - 1500 EA
01.08.2008 - 1000 EA
The date of schedule line should be after taking calculation of planned del time of the RM, which is not happening. I can't understand why?
The planned dlv time is same in all 1) Material Master 2) Scheduling agreement and 3) Pur info record
Please help.
Regards,
Amol

Dear Amol,
the date shown is the ultimate reciet date and not start date.
Since you have already converted PR into schedule lines you will not be able to see the actual start date.
If it was still a PR you can see the release date as planed delivery time days early.
If the requirements date was say 31/05/2009 and you were taking planning run today then the recieved date would come as 05/06/2009.that is 14 days from today.
if requirement well beyond planned delivery time then the planned delivery time will not reflect in recipt date.

Problem emailing articles from websites

When I click to email an article from any website, the system locks and then it seems to repeat itself multiple times like it is trying to access outlook but can't. I finally have to ctrl-alt-del and close each individual window which, could be forty + before I can get it stopped. This happens in IE as well.

See [[Firefox keeps opening many tabs or windows]]

Storage Location exclusion from MRP problem

Hi all,
I have added some Storage locations to exclude from MRP, via SPRO cust.
(Production>MRP>Planning>Define st. loc. MRP per Plant)
However, when I want to verify it, I go into MD04 and for a material, the excluded storage loc. lis does not show up in the end.
What additional cust. do I have to do?
Thanks,
Screens:
https://picasaweb.google.com/koray.tulumen/Paylasacaklarim

Hello,
To exclude the storage location from MRP Run
Check the following settings:
1.In OMIR you can exclude particular storage location. input values as 1
2.MRP - 4 view For storage location option input value as 1
3.in MMSC - same input value as 1
Hope the iformation is useful
Regards

Problem navigating article with prev next buttons

I place a next and previous button to navigate between pages in the same article using gotonextpage but it stops working after a few times navigating the article. I tried with navto://article# but it did not worked either

You might have run across an intermittent page link bug in the Adobe Content Viewer. This bug was addressed in a recent hot fix. If you build a custom app (or a new Content Viewer), the issue should be resolved. Or, wait until the viewer is updated in the store.

LTP u2013 MRP Problem

Hi
We need to run MRP for 3 planning scenario of 8 plants . We cannot set the back ground as it is going to be one time in a year .Is there any way we can combined all the MRP variant program in to single program and just run the single program . It is hard to run 18 times the MRP ( MS01)
Thanks
JJ

Dear JJ,
In my understanding I dont think its possible,moreoever for each planning scenario that is used
scheduling parameters must be present and everytime once after taking LTP run while assigning the
new plan to the same planning scenario first you have to cancel and then assign new plan and then
release and save the datas.
If you are going to use different planning scenario,then you can schedule the job in sequence in SM36.
Check and revert back.
Regards
Mangalraj.S

Graphics problem: pixelated articles all over the screen?

I've been getting this on the odd occasion lately.
http://img131.imageshack.us/img131/7537/picture2smallfb8.png
When it happens the whole machine goes dead, no screen-capture possible, which makes me think it's a hardware problem, and you need to hard reboot. Sometimes it just persists through the reboots, too.
I'm on 10.5.5, the Intel Core 2 Duo 15'' model from about mid-07. GeForce 8600M GT card in it.
I imagine it's a fairly common problem since I've seen it mentioned elsewhere (although without adequate explanations/fixes), indeed that isn't even my image.
Ideas please? I'm going abroad shortly and don't want my MBP to die in foreign lands where I can't get her help.
Message was edited by: Lord4Bz

+Ideas please? I'm going abroad shortly and don't want my MBP to die in foreign lands where I can't get her help.+
Well, best guess is it's a problem with:
the graphics chip itself
the motherboard
the lead from motherboard to screen
If one or more of these is causing problems now I'd let Apple take a look at it before you travel ...

Schedule line category CN is inconsistent with the MRP type

Guys,
I am running into an issue here..
I have change the MRP type of articles from ND (no planning) to PD (MRP)
Now when I try to change sales oders on this articles (VA02), I get error message saying that the Schedule line category CN is inconsistent with the MRP type
Does that make sense to any of you and what is/are the remedies
KR - Loï

Dear
When you have created SO at that time the MRP type was ND so based on that System has picked the Schedule line category CN which is No mat.planning. Create new SO this problem will not come. Based on Strategy & PD schedule line category will come as mat. planning.
Regards
ABhijit Gautam

Youtube video is blank,but audio played well. other browser such as chrome got no problem with it. FF Developer Edition.

- youtube video just blank, but audio is there. tried both embedded in facebook or other website, and at youtube.com. both same result.
- facebook video played just fine
- other browser played just fine.. no problem at all..
- i'm on firefox developer edition
- tried installing latest flash update, still the same result.

This problem can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. [[Image:fpSettings1.PNG]] 
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Flash player youtube problem

Ok guys, this one is a bit more complicated than it sounds. A while back I was using a older version of Fox, I think v 15.xxx and had flash player 11 or 12. When using youtube it looked great. But now I upgraded to the latest firefox and latest flash player. When I watch vids on youtube they look real blurry and pixelated until the 720 hd kicks in. And even then it doesn't look as good and with the older flash player. I checked and my nvidia card doesn't seem to have any effect on either program. Is this a legit problem and which flash player version should I switch back to??

Hello,
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. [[Image:fpSettings1.PNG]] 
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Mrp problem of articles

Similar Messages

Maybe you are looking for