MRP Procurement Compliance Report.

Hi Experts,
I need to do data validation for a MRP Procurement Compliance report.
The report will be executed in Netweaver Business Client as a BI Report.
For Data Validation I will need Standard MRP Reports to check that the data being pulled for the BI report is correct.
Any advice/suggestions to what reports I could use?

This Report provides an overview of Purchase orders that do not comply with the requirements of MRP based procurement.
The requirements are as follows:
u2022     Purchase orders must be created with reference to MRP generated Purchase Requisitions
u2022     Purchase orders must be created with reference to Purchase Requisitions which were created from converted MRP generated planned orders
u2022     Purchase orders must contain a reference to a contract item

Similar Messages

MBAM Enterprise Compliance Report not updating

I've had MBAM going for a day or to, i can see computers in the computer compliance report if I type the test computers in; however, i dont see any computers under the
Enterprise Compliance Report. Is there a refresh cycle for this report and a way to get it to go quicker? I am not seeing any computers yet and figured i should see them by now and am not sure where to look for issues for this part only.
Thank you for any help

I had to uninstall and reinstall MBAM and now everything works except the enterprise compliance report and when I try to run the
clearcache job in SQL I get an error . There are no steps defined in the clearcache job , its just empty
How can I fix this clearcache job?
thx
I have the same problem. Could anyone show us the steps so we can recreate it?
Update on the problem,
I found another forum post about the same problem and how to recreate it, But I couldnt get it to work. Please try it and see if it works for you.
http://social.technet.microsoft.com/Forums/da-DK/w7itprosecurity/thread/d481451c-1acd-4722-a53b-6b5632975a87
"run selection in the reportingdb.sql"

MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

Running BitLocker/MBAM 1.0.1237.1.
About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
"Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
Hoping someone has experienced this before, fixed, and can share insights.
Thx,
DCL

You may want to look for communication errors under the MBAM node in Event Viewer.
You may also want to review the registry settings discussed under the
Configure Lab Computers for MBAM Evaluation section of this TechNet article:
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
HKLM\Software\Microsoft\MBAM\NoStartupDelay
Specifically the StatusReportingFrequency
key.
Brandon
MDOP on the Springboard Series on TechNet

MRP Procurement process

Hello Team ,
I am looking for the correct SAP business practice of MRP procurement process for existing setup.
Current setup : Demand is based on the sales / market demand based on which material is planned . Sales order / Production order are posted which created demand and the daily run MRP creates PR which goes for Release strategy . Once PR is released , then PO is created . As the demand fluctuates , some of the PR's get deleted by the new MRP run. Release strategy exist for MRP PR's greater than $X i.e.PR created more than X $ only will go for Release strategy .
Current Issues : PR created with MRP less than X has no release strategy , and buyer converts the PR into PO . With the new MRP run , PR gets changed and has $ value more X value which now has Release strategy determined in PR . So now the issue is that the PR is unreleased & PO is already created .
Business wants to keep changing the existing PR after MRP run as they don't want to overstock parts for which the demand did not exist .
I am sure there are lot of other companies who will have this constraints from business demands and wanted to confirm how the MRP settings are maintained for PR .I am open to have new process also to fix this issue.
Appreciate your help in this
Lawrei

Well it sounds like the demand plans (independent requirements) are not credible to the raw material planners/buyers. They think its unrealistically high and are balking at buying the raw material quantities that MRP calculating.
MRP will automatically control stock levels through the safety stock.
There is no point in rejecting P reqs generated from MRP without addressing the safety stock and /or demand. MRP will just replace the requisition quantity on the next run. This will cause purchase requisition quantities to 'stack up' at the start of the time horizon.
To have a bit cleaner process, you could try introducing a planning time fence. Requisitions within the fence are fixed. New requisitions are scheduled after the time fence. MRP will suggest cancelling requisitions if demand drops. The planner can adjust requisitions within the time fence manually if needed. Planners need to be able to do this - it's a big part of their jobs!
Another thing you can do is keep the replenishment proposal as planned orders for as long as possible (via the opening period). Only have requisitions created for a short horizon during which purchasing will quickly turn these into POs.

Software Updates - Compliance Report Discrepency - Updates Listed in Report that aren't part of the deployment

I will try to explain this as clearly as I can. I've been unsuccessful in trying to search for this exact problem. I've not yet called support on this as it's not critical.
I recently began to see a problem in that our compliance reports showed two servers as compliance status unknown for an extended period of time. I made sure they had the most current version of
the WUA, I re-installed the SCCM agent, I manually applied patches using windows update directly on the machine. I've tried running the "RefreshSererComplinaceState" vbscript. However, the same issue persisted. I also noticed that
the number of servers listing as compliant and non-compliant remained relatively the same between deployments of
windows updates.
I began to research the compliance report "Compliance 1 - Overall Compliance". I began to see that there were updates listed in the report which do not correspond to updates which are
members of the deployment.
Example, The following patch "Update for Windows Server 2008 R2 x64 Edition (KB2800095)" I currently don't have as a member of any of my deployment packages. It's not a member of any
of my update groups. Yet, it's consistently being reported in the list of updates in that update group. That's one of several like that. It's not something I've encountered before.
Is there a way to reset my updates list on the server side the next time I get ready to do updates?

Hi,
Here is a good blog discussed the issue:
http://damatisystemcenter.com/2013/07/21/sccm-client-unknown-status-what-could-be/
In the meantime, please check UpdatesHandler.log on the client which status show unknown.

Sccm enterprise by site overview compliance report

in Config mgr 2007 i had a query that would pull basic compliance ratings for all the sub collections of a single parent collection, displaying the breakdown in a per site bar graph percentage compliance report
With the migration to CM12 and it not having parent collections this functionality is not available
here is the old query i would appreciate if someone could take a look at this and provide any input they may have:
also note it doesnt seem to like the v_updateliststatus_live for some reason either
select
v_Collection.Name AS [Site],
Status=sn.StateName,
NumberOfComputers=count(*)
from v_UpdateListStatus_Live cs left join v_StateNames sn on sn.TopicType=300 and sn.StateID=isnull(cs.Status, 0) left join v_AuthListInfo ai ON cs.CI_ID = ai.CI_ID inner join v_R_System ON cs.ResourceID = v_R_System.ResourceID INNER JOIN v_FullCollectionMembership
ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID INNER JOIN v_Collection ON v_Collection.CollectionID = v_FullCollectionMembership.CollectionID INNER JOIN v_CollectToSubCollect ON v_CollectToSubCollect.subCollectionID = v_Collection.CollectionID
WHERE parentCollectionID = ‘TTC00074′ AND Active0 = 1 AND ai.Title = @UpdateListTitle
group by sn.StateName, v_Collection.Name
ORDER BY [Site], sn.StateName
thanks
rob

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
This query will not work because that SQL view doesn’t exist in CM12.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Enterprise Compliance Report not showing any Pc

I've MBAM going for a day or to, i can see computers in the computer compliance report if I type the test computers in; however, i dont see any computers under the
Enterprise Compliance Report. i am running mbam 2.0 sp1 on 2012, and sql on server 08 r2

To get updated reports, open SQL Management Studio on MBAM Server. Under SQL Server Agent, click Jobs and then click Create
Cache. Right click on Create Cache and click Start Job at Step...
Once the Job is completed, Refresh the web page for MBAM Enterprise Reports and you will see all the Computers listed.
Gaurav Ranjan

SCCM 2012 Built in Compliance Report - I don't understand well

SCCM 2012 Built in Compliance Report not understanding
I am using built in compliance reports in SCCM 2012 (Compliance 1 – overall compliance), which is giving me inconsistence report.
For now, I am now updating many of my servers manually and finding out- how I can show compliance report using SCCM
I have a created a software group only for compliance propose for Aug 2014, containing all updates for all versions of Windows Servers. I have not changed/updates that software group.
Before Microsoft released last patches, the software group didn’t have any expired updates.
I had good number of servers, where showing compliant
However, after new patched have released and I have patched some servers manually, I can now see that I have some servers in to Non-compliant section, which were in compliant section two weeks before.
I also have now lots of server showing in: Compliance state unknown, which I didn’t have two weeks before.
I know, client servers supposed to report to SCCM in every 7 days and I can manually push a client to report to SCCM from client agent. Please help me to understand
Why some servers, where compliant before, are now showing non-compliant? How to be certain, which updates are causing trouble
When I check individual server into compliant sections I see that some updates are showing under * Is Required * I also don’t understand how that server is compliant then There are additional number of updates showing up, which are not part of my software
group. Where those extra information are coming from. From WSUS ?
My final goal is to create monthly Software group> deploy that group to install patched. Next month include that group to a compliance group for only compliance reporting purpose. After every quarter, create one compliance group, combing all three
months updates. So I can show to everyone that we have complied until x months.
Before all can happen, I want to understand my compliance report better.
Thanks in advance.

Hi,
However, after new patched have released and I have patched some servers manually, I can now see that I have some servers in to Non-compliant section, which were in compliant section two weeks before.
Since the issue occur after you applied the latest patches. Please check your deployment, you can see the detail error there.
And please make sure update did intalled successfully on these servers.

MBAM 2.5 Compliance Reports not updating

After much fiddling to install MBAM distributed, I ended up with a remote SQL server and a web server with the SSRS role. The Compliance report has only one entry, my machine, yet there are several more in Recovery database. For version 1.0 and 2.0, you
had a SQL Job called CreateCache that runs a storedProcedure. However, this is removed from version 2.5.
How can I force the Compliace report to update with new data? Where are the logs for MBAM that enables me to see when this operation fails?

There was a problem With the SQL database permission. I thought it worked as intended because of the Helpdesk and SelfService portal worked looking normal and working.
Event ID 28 has not been seen yet, so not sure if this actually is a valid ID.
For Compliance and 256-bit With Diffuser (which is removed from Windows 8) we had to deploy KB2975636 -
https://support.microsoft.com/kb/2975636?wa=wsignin1.0#Prerequisites.
We find the Reporting feature slow even thou we have low amount of Clients.
All in all I still believe that MBAM is not Enterprise ready and I would suggest that other Technologies should be considered first.

Host Compliance Report - Available Items Grayed out

Trying to run a host compliance report against discovered assets.
Under 'Available Items' --> "Operating Systems" --> "Solaris" --> "Solaris 10" I have a list if my discovered systems (I can see/manage them in 'Assets') but they are grayed out and I cannot select any of them to move to 'Target List" to run the report against.
Let me know what additional information is needed to help offer a solution.
Thanks in advance,
John

Hi,
If you aren't confident in using Terminal check out this site for help with Launch Services.
http://www.thexlab.com/faqs/resetlaunchservices.html
Carolyn

Compliance report - Oracle Projects??

Hi All,
Does anybody has any idea about Compliance Report.
If so , can you please guide me how to run it in Oracle Projects.
Thanks and please reply,
Anand.

Hi
There is no way to fund the lowest tasks.
You cannot generate invoice with invoice lines per lowest level tasks, using standard functionality.
Assuming your billing is based on WORK, you could customize the Invoice Format to summarize RDL's by lowest task level.
However, if you need hard limit control by lowest task level you will need to capture the allocation of fund to tasks. That could be done on a revenue budget you maintain by lowest level tasks. In addition, develop billing extension called during GDI that will perform the fund check for each task.
Dina

What are compliance reports inUS-Payroll?

what are compliance reports inUS-Payroll?

Hi Rakesh,
There are many USA payroll related compliance reports but major ones are Tax Reporter (PU19 transaction), Garnishment Reports, 401K reports and New Hire Reporting.
You should be able to find them under Human Resources-->Payroll--> Americas-->USA under different sections.
For you further assistance I have SAP link mentioned below which tells you more about these and many other US Specific compliance reports.
http://help.sap-ag.de/saphelp_globext607_10/helpdata/en/2a/3f5493538411d1898a0000e8322d00/content.htm?frameset=/en/f4/8c3d306c2a11d686b60000863e02a8/frameset.htm
Thanks,
Ameet

LMS 4.2 compliance reports for the User-Defined Policy Groups.

Dear team,
I need your help to know if i will be able to export compliance reports in PDF or CSV for the User-Defined Policy Groups.
I have checkedk the reports tab and i was able to export compliance reports in PDF format inly for the system defined policies but i couldn't i find any option to export these reports for the a user defined compliance policy.
Kindly let me know if this is possible.
Regards,
Muhannad

Dears,
Do anyone have an idea about this question?
Regards,
Muhannad

ZUWS 3.5.0.160 Compliance Reporting

ZUWS 3.5.0.160
Single Server Install
The "Compliance Reporting" selections do not match the available "Reports". I am wondering if it is supposed to be this way or if the wrong set of reports are isntalled. Can someone tell me if they can report the actual files transfered to removable media?
Management Console -> Policies -> My Policy -> Compliance Reporting -> Storage Devices -> Files Copied to a Removable Device
The wording associated with this selection says: ... client will report files that have been copied to a removable storage device ...
From the "Reports" tab (or View -> Reporting), -> Outbound Content Compliance -> Removable Storage Activity by Account
Only reports the client and size of data transfered, not the files transfered.
thanks,
-- Drew

Hi Drew,
Have you check TID 7002922?
http://www.novell.com/support/php/se...200%2043999181
Hope this helps,
Daniel
>>>
From: dbullardanadys<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 3/24/2009 3:56 PM
Subject: ZUWS 3.5.0.160 Compliance Reporting
ZUWS 3.5.0.160
Single Server Install
The "Compliance Reporting" selections do not match the available
"Reports". I am wondering if it is supposed to be this way or if the
wrong set of reports are isntalled. Can someone tell me if they can
report the actual files transfered to removable media?
Management Console -> Policies -> My Policy -> Compliance Reporting ->
Storage Devices -> Files Copied to a Removable Device
The wording associated with this selection says: ... client will report
files that have been copied to a removable storage device ...
From the "Reports" tab (or View -> Reporting), -> Outbound Content
Compliance -> Removable Storage Activity by Account
Only reports the client and size of data transfered, not the files
transfered.
thanks,
-- Drew
dbullardanadys
dbullardanadys's Profile: http://forums.novell.com/member.php?userid=46822
View this thread: http://forums.novell.com/showthread.php?t=366322

Conflicting Compliance report results/Updates appearing in compliance report that aren't in an update list

I'm getting some conflicting results between a couple of different compliance reports as well as computers appearing as non-compliant even though the non-compliant updates aren't in even in the update list in question.
If I run the Compliance 1 - Overall Compliance report for my only update list for the Desktops collection it returns 49 non-compliant computers.
Here is an excerpt from the Compliance 6 - Specific computer report if I drill down on one of those computers:
Microsoft
Updates
963662
Update for Microsoft Office InfoPath 2007 Help (KB963662)
88aed865-ce1a-42b7-b231-04c77027e03e
http://www.microsoft.com/downloads/details.aspx?FamilyId=222F2488-C8AE-42DE-AFEF-55812642010C&displaylang=en
Microsoft
Updates
963663
Update for Microsoft Office Access 2007 Help (KB963663)
3d73ea44-e1a8-418c-b3fa-a0a2047d86a4
http://www.microsoft.com/downloads/details.aspx?FamilyId=C3E78FB1-A75F-4280-82EE-2ED466E3F374&displaylang=en
Microsoft
Updates
963665
Update for Microsoft Office Word 2007 Help (KB963665)
0f7d07a2-c659-4d2f-8deb-2be3192581a2
http://www.microsoft.com/downloads/details.aspx?FamilyId=2ABE6EBD-4033-44B0-B723-4E17CD16A15C&displaylang=en
Microsoft
Updates
963666
Update for Microsoft Office Visio 2007 Help (KB963666)
6a59169b-851d-4653-8629-051a350bcdbf
http://www.microsoft.com/downloads/details.aspx?FamilyId=CF925E59-96BD-4803-9A2F-1BECC07C2379&displaylang=en
Microsoft
Updates
963667
Update for Microsoft Office Publisher 2007 Help (KB963667)
a20602e3-5d27-414e-902b-93d4026cf504
http://www.microsoft.com/downloads/details.aspx?FamilyId=79182D0E-D08E-4EEA-8346-23F71DDA768C&displaylang=en
Microsoft
Updates
963669
Update for Microsoft Office PowerPoint 2007 Help (KB963669)
dda60fcc-6280-458f-be92-d400947094cc
http://www.microsoft.com/downloads/details.aspx?FamilyId=7A813892-2033-4210-B96C-10DE08ABC6AC&displaylang=en
Microsoft
Updates
963671
Update for Microsoft Script Editor Help (KB963671)
ec27d810-4120-40b1-8768-a4cf5c51db23
http://www.microsoft.com/downloads/details.aspx?FamilyId=05F07E2F-EFCC-45B8-9DEF-A873927FE904&displaylang=en
Microsoft
Updates
963673
Update for the 2007 Microsoft Office System Help for Common Features (KB963673)
45a7cc94-063a-495e-bceb-5f605f23f228
http://www.microsoft.com/downloads/details.aspx?FamilyId=167B354E-0B88-470C-8CBE-AC3228084FA9&displaylang=en
Microsoft
Updates
963678
Update for Microsoft Office Excel 2007 Help (KB963678)
e4daa78f-4557-4c6b-a4fe-2efafa91ab47
http://www.microsoft.com/downloads/details.aspx?FamilyId=2FBF47A2-E338-4ED8-92F2-B0A146E8593C&displaylang=en
Now the first strange thing is that all those Office 2007 updates aren't even present in the update list that I'm generating the compliance report for. So why are they showing as required but not installed?
The second strange thing is that if I run the Compliance 3 - Update list (per update) report for the same collection and update list I get different results. Those updates that are shown as being not installed on some of my computers in the first compliance report aren't showing up in this report. This report is showing the accurate list of updates in the update list.

Yes, I know this is an old post, I’m trying to clean them up.
Q1: The Report Compliance 6 - Specific computer shows all SU that are needed / applied to that computer.
Q2: You will need to show an example of what you mean.
http://www.enhansoft.com/

MRP Procurement Compliance Report.

Similar Messages

Maybe you are looking for