Mrp run and seeing the stock in md04 with green traffic light showing green

Hi,
i am running a mto scenario in which sale order is created and mrp run is done and i checked the stock md04 of a finished product in that the rawmaterials and semifinshed products are showing the traffic light green light of show overview tree in md04 when it is first time created there is no stock of the rawmaterial and semfinished product.
with out any stock why it is showing the traffic light green and what is the procedure to show the light red when stock is not there.
rawmaterial is of consumable like paint in which it is not supporting in the bom and it is giving the message it is of process material can any body pls help me how paint is created as a consumable in bom creation.
regards,
muralidhar.t

Hi muralidhar,
MRP is a planning tool, not an availability check one.
It means that you are getting a green light even though there's no stock because the lead time to procure is shorter than the requirement date.
Regarding consumables, I'm not sure what you include in that, but you can either define them as non stock items in the BOM (in which case they will be specifically purchased for the production order), or maybe you meant that these materials are planned using consumption based planning; in this case they are defined normally as a stock item in the BOM, the difference being that they are not exploded in MRP, and the requirements are not triggered by the higher level.
Regards,
Mario

Similar Messages

HT1430 My iPhone is completely frozen. I did a hard reset about 10 times and finally the iTunes logo appeared with a plug-in showing. I can't get it to anything else. Help?

MY iPhone is completely frozen. I did a hardest and finally after 10 times it came up with the iTunes logo with a plug-in sign. It is still frozen.
WHat should I do.
MErmaid

You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
So far I have tried the following to no avail:
Checked my pc's device manager - it recognises the device and says it is functioning properly.
Checked the drivers to make sure they are upt to date.
Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
Reinstalled the latest itunes.
Reset the ipod.
Put the ipod into disk mode and reconnected to itunes.
Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
At this point I dont really want to part with another $300 odd dollars for a new one.

MTS - MRP Run and Poduction version

DEAR PP GURUS & EXPERTS,
There is a case of MAKE TO STOCK and we have multiple production versions (OR BOM) for a single material.
Now, MRP Point of view: Suppose we want to produce (let 6000 PCS) of that finished goods. Out of which:
1000 Based on BOM1,     2000 Based on BOM2      3000 Based on BOM3
Can we differentiate 6000 PCS During MRP RUN or During MRP Run can we devide the Finished Qty in percentage.
Thanks in Advance.
DSC
Edited by: Devendra Singh Chauhan on Dec 23, 2010 2:02 PM

DEAR PP GURUS / EXPERTS
Suppose, I have finished Goods 20017440 for which I want to produce 5000 PCS. For that I have mentioned Quota arrangement Usage 3 in MRP-2 View, In MRP-4 View Under BOM Explosion / dependent requirement I have mentioned
Selection Method -3 and also mentioned Production versions (1001, 1002 & 1003).
After that in MEQ1(Quota arrangement) I have mentioned Validity and three lines for this item by defining:
QAI     P     S     PPI     Ver     Quota     in%     Quota BAse Qtt
1     E     E     1152     1001     2     20     1000
2     E     E     1152     1002     5     50     2500
3     E     E     1152     1003     3     30     1500
After that Run MRP in MD02-NETCH-2-1-3-3-2 and chek the result in MD04.
But Result is appearing only for 1 Production version not for second and third.
Actually my requirement is: I want to Produce 1000 PCS as per production version 1001, 2500 PCS as per production Ver. 1002 and 1500 PCS as per Prod. ver. 1003. So, total Qty. is 5000 PCS. For these I want to run MRP and generate planned Order.
Please Suggest Where I am wrong.
Thanks in Advance.
DSC

Want to see the stock of different variants with same configurable material

I have the stock for configurable material with different variants. Now I can see the cumulative stock
for that configurable material. But my requirement is that I want to see the stock for every variant
belonging to the configurable material.
How can I get it?

hello anant,
In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
I assume you are not taking about variant materials.
Reg
Samson.

What is the T-code to see the stock at tank level?

What is the T-code to see the stock at tank level?
Regards
S.Senthil

Hi Senthil,
                In Order to Overview the stock at tank level do the following:
            1. Tcode-   O4_TIGER
            2. In the screen launched set the 'Transaction' Field as 'Stock Overview'.
            3. In the 'Pre selection' frame, enter the Storage Location and the Seq. No (Tank ID) details
            4. On execution you will get to see a Report. Refer to the 'Corr. Book Stock' column for the available stock.
            5. If there are more than one materials assigned to a tank. Click on the line item of the Report to see the break up materialvice.
P.S: To fine the seq No of the tank use tcode 'O4NA'.
Please let me know if this has helped you.
Regards,
S. Satish

Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

Experts,
Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
Thanks in advance
Krish

Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

Open an App and see the App instead of just the name in the menu bar?

This may seem like a dumb question, but here goes anyway...
Two applications in particular....Microsoft Office apps (word,excel,etc)
and Pro Tools LE....
How do I open these apps and see the opening page of the app, rather that
just the name of the app in the menu bar and the desktop...?
This happens automatically in Win XP or Vista....

Only a very few Apps have the option/preference to do that in OSX, not sure if any MS APPs do or not.
Maybe it would be closer to what you want though, to instead of opening the APP, drag say the Word® doc you want to the Word® icon in the Dock, which runs Word, opens the document, and skips the Open Dialog.

I have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody

pls help...

I have the same machine, except it's running the blessed fast Snow Kitty,
"when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
What specs are you refering about?
Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

I have my macbook pro 17" 2.5 Q.C. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb.

i have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody out there have the same problem please how can i know or is there any other way to be sure what's the real capacity of my graphics?take note this is brand new late 2011 model made to customize MD311 with anti glare screen...

I have the same machine, except it's running the blessed fast Snow Kitty,
"when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
What specs are you refering about?
Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

WHER I SEE THE STOCK IN VARIENT CONFIGURATION

Hi
Gurus,
Where i see the stock of different varients available in plant .for example i want to the stock of yellow,red,black sheets with thichness and width from which this any t-code or tables.
Thanks in advance
avinash.pegarlawar

Hi,
It is not possible to maintain the stock for variant configuration materials. This is purely MTO scenario.
Regards,
V. Suresh

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

Calling a VI to run and closing the caller VI

Good day to all
what I wanted to ask is:
lets say I'm running a VI who is calling another VI.
now I want to close the first one and leave the second one running.
can it be done? and if so how?
thanks
shai

That's a property node. What I had shown in my example is an invoke node. You will need to learn about property nodes and invoke nodes which can be used to act on specific LabVIEW classes, such as VI references and control references. You can learn about these in the LabVIEW Help and in the examples that ship with LabVIEW. For control references you can take a look at this: Control References: Overview. For a VI the same concepts apply, except you just have a different list of properties and methods.
To pass values to a VI that you call dynamically you therefore have to use the appropiate methods, like in this example:
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
Message Edited by smercurio_fc on 10-16-2008 09:15 AM
Attachments:
Call Test_BD.png ‏7 KB

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

ITunes movies no longer sync from Dell laptop or MacBook Pros (both authorized devices) to iPhone 6s or iPad Air 2s after configured at Apple store yesterday. In the past I could see the movies in iTunes with the cover photo and sync.

iTunes movies no longer sync from Dell laptop or MacBook Pros (both authorized devices) to iPhone 6s or iPad Air 2s after configured at Apple store yesterday. In the past I could see the movies in iTunes with the cover photo and sync to the other devices but now there is a listing a movies with no cover photos and in fact if I try to view the movie on the MacBook Pro it cannot be found unless I download it.

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

Not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1

Matt,
Thanks for the reply.
In my current experience, I am not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1.
In Windows Store 8.1 (Tablet), it works fine.
Questions
Is this event expected to fire in Window Phone 8.1 (Universal Apps, Not Silverlight 8.1) ?
Does this event depend on the target application to supply AppName?
Thanks for your help. Much appreciated.
Example Code Block
//From Page Contstructor or OnNavigatedTo Handler
_dataTransferManager = DataTransferManager.GetForCurrentView();
_dataTransferManager.TargetApplicationChosen += DataTransferManagerOnTargetApplicationChosen;
private void DataTransferManagerOnTargetApplicationChosen(DataTransferManager sender, TargetApplicationChosenEventArgs args)
//fires in tablet but not phone

This is not an answer, Mr. Wong. The link you referenced refers to the DataTransferManager class being supported only in Native apps, which includes Windows Phone 8.1 RT apps. All aspects of the DataTransferManager work except for the TargetApplicationChosen
event under a WP8.1 universal app. This event does NOT fire in the Windows Phone 8.1 RT API implementation of DataTransferManager.
You need to reopen this thread and address the issue, please. The lack of support for this event is problematic for some phone scenarios, most notably supporting NFC Tap and Share.
Mark Jones, Owner MJ App Factory

Mrp run and seeing the stock in md04 with green traffic light showing green

Similar Messages

Maybe you are looking for