MRP Run can not create Planned order to Sales order

Hi,
I have a problem with planning run to sales order. We have a configurable material which have make to order strategy. MRP Run does not create planned order to some of our sales order. I think it has relation with schedule lines but i can not understand the problem.
If schedule line has 1 as confirmed quantity MRP run can not plan but 0 as confirmed quantity MRP Run creates planned order. How can i solve this problem?
Regards,
techmastere

Hi,
Order for which qty is confirming, check which schedule line is determined and which requirement type system is determining.
then in VOV6 for schedule line tick mark availability check & Transfer of requirement
for requirement class OVZG tick mark availability check & Transfer of requirement
Note: if schedule line is not relevent for availability check & ToR then system always defaul confirm quantity.
kapil

Similar Messages

Mrp run on no of line items in sale order

hi all
i have a sale order with o line items include.
i want to run mrp on sale order only (not want to use MD50)
can i use user exit for this task ? if so please advise which user exit i can use ?
thanks

Dear,
Please refer this link,
[Mrp run on no of line items in sale order|Re: MD50 issue]
Regards,
R.Brahmankar

CO-PA document is not created while doing the sale order cycle

Dear Experts,
I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
and (VF04,VF02). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
Please suggest me where i miss the settings..
Regards,
Krishna.V

Dear Ajay,
Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
Hear we maintained all gl's chart of acc level and cost elements also.
Please suggest me...
Regards,
Krishna. v

MRP batch job not creating planned orders

Hi Experts,
Can anyone help with suggestions of where/what to look at with this situation. My MRP background (batch) job is not creating planned orders for materials in certain MRP planning areas as expected, but will create planned orders in other MRP planning areas. Running MD01 or MD03 creates planned orders for materials in all MRP planning areas of the plant as expected.

Ben,
Any time you get a difference between interactive MRP and batch MRP, first look to the planning file.
Start out by finding some of the discrepant parts (no planned orders are being created) Review for the presence of a planning file entry in MD21. If an entry does not exist, create one in MD20. If an entry does exist in MD21, but there is nothing in the NETCH/ NETPL/reset ord/reexpl bom cols, then this means no relevant changes have taken place, and NETCH MRP will ignore the parts. You can optionally reset these flags in MD21.
If you discover that you have one material for which there is nothing in MD21 (no record at all), then you probably have others as well. Run MDAB in Background, which will mass create all the missing entries. Also a good idea to run MDRE in case something has been corrupted.
Here is [OSS note 205681|https://service.sap.com/sap/support/notes/205681] which explains a bit about the planning file. Also, See [OSS 371016|https://service.sap.com/sap/support/notes/371016] which describes a similar problem.
Rgds,
DB49

Idoc not created for a particular sales order

Hi,
For a particular sales order , idoc is not created .
The idoc has to be generated when we create a sales order ,
but for a particular sales order , the idoc is not generated when the sales order is created. The program is assigned in
nace for output type zd00.
RSNASTED is the program which triggers the idoc and FM: IDOC_OUTPUT_ORDRSP.
How to debug and see why the idoc is not generated,
i had kept break point in idoc_output_ordrsp function module
and program rsnasted, but my control does not
reaches this point.
can anyone help me in this issue.
Thanks and regards,
A. thirumaran.
Edited by: thirumaran a on Jul 22, 2008 1:35 PM

Hi,
Could you please check if the output is processed or not, whether in the output type what all conditions you have maintained e.g send immediately.
Reward me point if you find this helpful.
regds.......
Sumit

Create Planned HUs for Sales Order using transaction MFP12

Hi,
I am using MFP12 for creating the Handling units based on Sales Order. I can able to create the Handling units based on Sales Ord. But the problem here is I am not getting how the Sales Order creating the Handling units with out taking the reference from Outbound Delivery.
Kindly let me know the functional flow and the corresponding tables that should update the handling units based on Sales order.
Regards,
Murali

resolved

Can we create service po from sales order

HI
can we create sales order from service po. if yes then how can we do so.

Hi,
we can create po from sales order in cross docking functionality.
The steps are
Sales order > Purcahse requistion > Purchase order > Inbound delivery with reference to purchase order and PGR > Outbound delivery with refernce to sales order and PGI > Invoice and billing.
Br,
Tushar Patankar

Can not create planning function types (for process empty records)

Hi! SAP Experts,
I want to copy 0RSPL_FORMULA to another function types for processing empty records, ZRSPL_FORMULA. I checked this function type via RSPLAN, there is no error!. But when i try to use it in planning modeler. We found the error message "Infoobject 1FORMULA is does not available in version A". Do we need to create this infoobject?... Anyone know, please let me know.
Thanks,
Sake

Hi!,
Thanks for your help but I've already put that parameter,HIDDENFORMULAVARTAB->1FORMULA, in my planning function, ZRSPL_FORMULA. I validated it and no error found. But when I go to planning modeler, in web browser, and try to create a new planning function based on ZRSPL_FORMULA. I found the problem as I mention in previous message, "infoobject 1FORMULA is not available in version A". I try to search this infoobject in my system. The result is there is no this infoobject in my system. So, my question is do i need to create it with myself? What kind of infoobject i have to create? Key Figures or Characteristics?
Anyway, If I have to do this, why 0RSPL_FORMULA still used as normal.
Brgds,
Sake

Vl10 - can not create delivery

Hi Experts,
I cannot create delivery through VL10 but can create through Vl01n for sales order line item. Scenario is given below;
Sales order confirmed Qty: 25 Pcs
Delivered Qty: 25 Pcs.
No limit to subsequent deliveries.
there is overage, means I want to deliver more qty against this sales order line item. But VL10 does not create delivery for this sales order line item. While I can create delivery through VL01n.
Any idea?
Thanks in advance.
Regards,
SA

Hi Erik,
It does not work.
Thanks,
SA

CO08 can not create Production Order!!!

Dear Experts
We are running an MTO(make to order) scenario!
First we create an contract in the system!Then we create sales order
with reference to this contract!
And when the sales order is sent to the planning department! They use
TCODE:CO08 create production order with reference to the sales order!
But we get an error message as follows:
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 41033737 and item 000010.
Therefore, the settlement and possibly inventory management are carried out using the number of the
preceding document.
ut when I entered the the contract in Co08 and then I am able to create
the production order.
And when I back to see the detail in the sales order ,I find there is no
value in the account assignment to the profitability segment!!
Why the sales order have no profitability segment??*
Why we can not create production order with reference to sales order??
It seems there are one problem!
Thanks for any reply!!

Fei Liu,
The current situation that you have described is pretty standard functionality for most MTO requirements classes. Account assignment is normally to the reference doc, not the 'Release' Sales doc. This includes quotations as well as contracts.
If your business requirement is to instead use the Sales Doc number, and not the Contract number, you can change this by setting OVZG "Account Assignment Consumption" to 'blank'.
http://service.sap.com/sap/support/notes/459734
http://service.sap.com/sap/support/notes/729381
Rgds,
DB49

Run-time error '429':Active X component can not create an object

Hi Folks,
I am using some VBA code to run logic in BPC for Excel. When i try to click on VBA button, It's giving the below error.However when i am trying to execute same from server it is working fine. Accessing from BPC client only we are facing this problem.
Code have no issues. Is there any specific thing need to mentioned in client when we use VBA programming? Basically we used the VBA program to create the id's in BPC for Excel. So that it will automatically created on fly. Testing was fine interms of working in Server.
" Run-time error '429':Active X component can not create an object ."

Hi,
Are you trying to add a member into the dimension from excel? As you said that this has been already tested in the server and is working fine, I believe, you have taken care of everything.
Now, coming to the point, when you are adding a member in the membersheet, you need to process the dimension. This requires the admin rights. So, please check the task profile of the user ID, with which you are trying from your system. This user ID should be the primary admin.
Hope this helps.
Additionally, can you please elaborate on the steps on what you followed for adding a member from the excel directly?

Active X can not create running Scriptlistener VB code in Creative Cloud Photoshop

Currently, I am recieving an Active X can not create error when running this code. I use Visual Studio 2012 run as administrator in x86 mode, Creative Cloud 32bit run as administrator. OS is windows .
I am able to access the com library for CC in VS. When I run into troubleshooting this Script listener code, this type of code appears in several different functions throughout the application. I am getting an Active X error when the CreateObject("Photoshop.ActionDescriptor") is hit.
I am also logged in as an administrator of the box. I have created the process from a scriptlister log with the CS6 Scriptlistener in CC.
Any direction or feedback is appreciated. I need to know if I am missing something obvious.
Thank you,
Sub psAddGuide(ByVal pixelLocation As Integer, ByVal orientation As Integer) '0 = vertical, 1 = horizontal
        If orientation = 1 Or orientation = 0 Then
            Dim orientationID As String = ""
            If orientation = 0 Then
                orientationID = "Vrtc"
            Else
                orientationID = "Hrzn"
            End If
            'Script Listener code - don't blame me.
            Dim objApp = CreateObject("Photoshop.Application")
            REM Use dialog mode 3 for show no dialogs
            Dim dialogMode As Integer = 3
            Dim id6
            id6 = objApp.CharIDToTypeID("Mk ")
            Dim desc3
            desc3 = CreateObject("Photoshop.ActionDescriptor")
            Dim id7
            id7 = objApp.CharIDToTypeID("Nw ")
            Dim desc4
            desc4 = CreateObject("Photoshop.ActionDescriptor")
            Dim id8
            id8 = objApp.CharIDToTypeID("Pstn")
            Dim id9
            id9 = objApp.CharIDToTypeID("#Pxl")
            Call desc4.PutUnitDouble(id8, id9, pixelLocation)
            Dim id10
            id10 = objApp.CharIDToTypeID("Ornt")
            Dim id11
            id11 = objApp.CharIDToTypeID("Ornt")
            Dim id12
            id12 = objApp.CharIDToTypeID(orientationID)
            Call desc4.PutEnumerated(id10, id11, id12)
            Dim id13
            id13 = objApp.CharIDToTypeID("Gd ")
            Call desc3.PutObject(id7, id13, desc4)
            Call objApp.ExecuteAction(id6, desc3, dialogMode)
        End If
    End Sub

Hi Richard,
Welcome to the Community!
The following might explain and help solve the problem...
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
Thanks!
Ankit

When i try to download firefox onto this computer, It downloads and says run or save. I click run and it says that it can not create temporary files. How do i fix this?

I try to download firefox but it comes up with a error message saying it can not create temporary files.

Beginning with Firefox 4, Macs must have an Intel x86 processor ('''''yours is a PPC Mac''''') '''''<u>and</u>''''' OSX 10.5 or higher ('''''which you do not have''''').
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9]
'''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs with OSX 10.4.11 and OSX 10.5.8. Firefox 9 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/ReleaseNotes90
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How To Automatically Create Planned Orders When Sales Order Is Saved

I have a MTO sceanrio where we need to create planned orders when sales orders are saved without running MRP.
I have the Planning Strategy Group set to 81 in the material master, but it didnt create the planned orders.
Could you tell me other settings I should review to make the planned orders create automatically?

Tony,
At the "Requir. Classes" (OVZG) customizing screen, field "Automatic start of make-to-order in background mode" affects the automatic planning. See fields help doc. below.
    If you select this indicator, the system automatically carries out
    single-item, multi-level planning for a sales order if a sales order
    item is either created or changed.
    This function can only be used for make-to-order production.
So check out the Req. Cl that yr Req. type (req. type is part of a strategy).
BR,
Elly

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

MRP Run can not create Planned order to Sales order

Similar Messages

Maybe you are looking for