MRP run details(date and time when MRP was run)

Hello,
I need time stamps of all MRP/MPS run for a particular material. Please let me know relevant T.code/FM/BADI.

Dear
One more way to find this is using Transection Code AUT10.
Here you can find not only Last MRP date but some other useful data also like user, date ,time and so many.
Try it by using T.Code like MD01, MD02, MD40 etc.
Or goto se16-SAP Table MDKP-Here you will get MRP run details
Hope this helps
Regards
JH

Similar Messages

Is there a way to see an access history for my ipad mini? dates and times when it was accessed? not particularly a safari history, just when the pin code was last put in?

Im worried that my ipad is being used without my knowledge, I am randomly losing whole conversations from my messages although they are still visible on my iphone. I wanted to see when my ipad was last accessed before i start accusing people of messing with it.

I'm not aware of any setting or app that will do what you are looking for, but it possible you might find something in the app store.
You should consider changing your pass code and possibly using complex rather than simple pass code. And keeping the device secure when not in your possession.

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

How do I Show date and time when I hover over clip like in iMovie

How do I get FCPX 10.6 to show date and time when I hover over a clip? I can so it in I movie and as I move over my clips the date/time is shown. I need it for that specific point in the clip not just the record start time.

I realize that my needs are outside of the normal editing workflow. I am a private investigator and last week I shot over 6 hours of surveillance video on a Sony video camera. Within this 6 hours of video there is at most 2 minutes of actual footage of my subject. So what I wanted to do was just import the parts of the clip I want, so I can avoid importing the whole 6 hours, and then add a text title of some sort that shows the date/time. My problem is that once I get this clip I have easy way of establising the TOD short of taking the clip capture time and then counting up using the SMTPE Timecode. In this regard iMovie makes it easier because I can just hover over the clip and see the TOD of that specific frame. iMovie on the other hand would force me to import the whole 6 hour video so i'm left moving between both programs which is less than ideal.

Is there a way to check the date and time a picture was taken

I would like to be able to view the date and time a picture was taken on my iphone

EXIF Wizard will do the job. I also created an app that shows date and time. You can scroll through your photos and automatically see the month and year change as you scroll - then pick a certain photo to see month/day/year and time.
https://itunes.apple.com/us/app/photo-date/id605218393?ls=1&mt=8

How do I find out the date and time a picture was taken on my Ipad?

How do I find out the date and time a picture was taken on my Ipad?

Photo Manager Pro
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/7a2b3650710f4bded81 ab75dda6a3ee5.jpg

Unable to insert date and time when using date datatype

Hi
I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
Thanks

user633278 wrote:
Hi
I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
ThanksYou most certainly can save the time. A DATE column, by definition stores date and time. What you describe is a presentation problem, and setting nls_date_format at the system as an init parm is the weakest of all settings as it is overridden by several other locations.
without seeing the exact sql that produced the error (not just your description of what you think you were doing) it is impossible to say for sure.
However, I'd suggest you read http://edstevensdba.wordpress.com/2011/04/07/nls_date_format/

Every time I create a new row, I want a certain cell to display the date and time the row was created. How do I do that?

=NOW() updates the date and time continuously, I don't want to do that. I just want the date and time in that cell to stay the same after that row is created. Seems like this would be easy, but I can't figure it out.

My preferred scheme is a variant of Barry's proposal 2
create the new row
select the cell in which you want to insert the date
type the shortcut dedicated to one of the four "Insert date" services delivered with WordService from Devon Technologies (FREE)
On a French keyboard, only one of the default shortcuts apply : cmd % which inserts the long date.
But we may edit these shortcuts.
Yvan KOENIG (VALLAURIS, France) mercredi 6 juillet 2011 15:12:16 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Date and time a picture was taken

In 08/06/2011 I was using a Blackberry Curve. is there meta data that will tell the times that 5 pictures were taken?
I need to use the time stamps to create an order of pictures.
I know that there is "created" , "last changed or last updated", and last "modified"
Regardless of the carrier is there any metadata that will help me to determine exactly when the pictures were taken.
They were taken between 9 a.m. and 1:30 p.m. on a Wednesday in early August and I do not think that the carrier used at the time(Metro PCS) would limit the actual metadata.
Can someone please help me with this?
Thank you
Bold_School

Photo Manager Pro
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/7a2b3650710f4bded81 ab75dda6a3ee5.jpg

When I create a calendar, in iphoto 8, I had an information pane lower left corner with date and time of the picture. Can it possibly be that the iphoto developers forgot about that in iphoto 9? This was very helpful when placing images according to date.

Today I updated to the latest iphoto version. The update itself went smooth and nice as one is used to from Apple. But when I wanted to finish my already started calendar, I have encountered two problems. The first is that I can't view the aperture library anymore directly from iphoto. Instead I have to open the iphtoto library in aperture but then my calendar isn't there. So now I have to copy images back and forth. No problem.
However, the old iphoto had a small information area in the lower left corner which was very nice to place images on an exact date. This seems to be gone...?? Really? How am I supposed to sort images according to date and time when I have to back to the library view every time? That's not very convenient..Or am I missing something?
Thanks for ANY help!
Patrick

The first is that I can't view the aperture library anymore directly from iphoto.
THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
LN

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
=IF(I127,NOW()," ")
I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?

I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
If you want you can assign the service a keyboard shortcut in System Preferences here:
SG

Date and Time on Mac OS X and Windows XP running diffrently... (Boot Camp)

Why the time differently when i change OS? I was used network time server on my both OS, but the time still wrong after i changed operating system... How can i solve this problem?
Thx.
Kelvin

Hi Kelvin,
The answer to your question lies within the Boot Camp Beta - Installation & Setup Guide. Under the Troubleshooting section on the last page. I quote:
My computer doesn’t always show the correct date and time.
The Windows XP and Mac OS X operating systems handle your computer’s date and time information differently, so the date and time may be different when you switch operating systems.
For best results, use a network time server. Resync the date and time whenever you switch operating systems.
To resync your date and time:
In Mac OS X, reset the option to “Set date & time automatically” in the Date & Time pane of System Preferences.
In Windows, click the Update Now button in the “Date and Time Properties” control panel.
Alternatively, you can manually set the correct date and time when you switch operating systems.
End quote
RD
Message was edited by: Red Dwarf - Beaten by the quick typing of NH Sullivan

Get-Hotfix InstalledOn property not returning hotfix installed Date and Time on Windows Server 2008 SP2 but works on Windows Server 2008 R2 SP1

Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize

Hi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.

Date and Time calculation in the Service Module

Dear all,
I have quite of a challenge here and i need serious guidance from your side.
My client is in services industry and requires to calculate the date and time when the service call as to be closed. Not only it depends on the contract type the service is linked to but as well on the priority.
The priority in Business One is unique, therefore we created a UDT (User Defined Table) to store the different 'response time' per contract/per priority. Example: a Platinum contract is always 24/7. But a gold contract priority 1 has to be closed in 240 minutes (4 workable hours) while a gold contract priority 2 has to be closed in 480 minutes (8 workable hours).
I created 7 user defined fields on the Service Contract header that calculates the workable minutes per day. So if my coverage for Monday is from 8 AM to 4 PM, my UDF called DiffMon will show 480. For Tuesday, they start a bit later, and the coverage is 8:30 untill 16:00, therefore my UDF called DiffTue = 450.If the check box before the day in the Service Contract window is not ticked, then the UDF shows zero.
I succeeded to calculate the expected closing time by using CASE WHEN statements as following, (all calculated in minutes):
     First, I need to check which day the Service call is created: A Monday or Thursday or... since my time coverage can change every day! I use SET DATEFIRST = 1 and compare today's date accordingly with my UDF DiffMon, DiffTue, etc.
     Then, When end of coverage time today Monday (4PM) minus the create time on the Service Call (1PM) is less then the time stored in my user defined table for that contract and that priority (i.e.480), then just add that to the create time and the create date (DateAdd(mi,...,...) ).
    When end of coverage time Monday (4PM) - Create time (1PM) + DiffTue(450) is bigger than 480, then I know I have enough time to solve my service call tomorrow Tuesday and I take the start time of Tuesday (8:30) + remaining time from yesterday (480-180 -> 180 = 3hours from 1PM to 4PM) and add that to the Create date + 1 so the end result will show Tuesday date and a time of 13:30
   Etc. untill I cover all possibilities based on which day is the service call created.
NOW, I need to include the holiday table !!!!!!!!!! And I can't foresee how the hell I am going to do that.
The maximum coverage can go up to 60 hours, that means more than a working week! What happens if I have more than one bank holiday in that week period? What happens when my holiday table tells me that date is a bank holiday but it is actually a Sunday and my contract is only running from Monday to Friday?
Am I going straight to a big mess up?
I will highly appreciate your comments,
Regards,
Frederic

Hi,
it is possible in query designer,
u do the two things for getting the days between to dates
1) in CMOD write the code for sy-datum create a customer exit variable in query as on caldate like eg zcedate
when 'zcedate'.
clear l_s_range.
l_s_range-sign = 'i'.
l_s_range-opt = 'eq'.
l_s_range-low = sy-datum.
append l_s_range to e_t_range.
u write this code exit_saplrrso_001.
it givs the sydatum
2) then u create one more variable on zdate limit with replacement path
then u go forto create the formula variable then it display ascreen there u select both customer exit variable and replacement path variable
zcedate-replacementpathvariable
it gives days i worked on this and succedded.
like the same way fortime also u can do but here at the time of creating the customer exit varible u go for option as range here
l_s_range-low = '20012009'
l_s_range-high = '29012009'
l_s_range-sign ='i'.
l_s_range-opt = 'bt'.
please try with the above one.
Thanks & rEgards,
k.sathish

Reseting the date and time on photosmart 5510

Having replaced the internal battery,the date and time on scanned items to memory card is giving 1st january 2001.how can i reset this.

Hey @dube55,
I am aware that your Photosmart model does not have a fax. Because I do not have a Photosmart 5510 here and have no access to the Embedded Web Server I gave you the generic tab options. My apologies for the confusion.
The Date and Time option under the Embedded Web Server for your printer should be located under Settings or Tools. It may be under a sub-menu on the left hand side, such as System or Preferences. Feel free to click on the options to explore what you are able to alter on your machine.
If you still do not see a Date and Time option we will need to run a Power Reset on the printer. Doing so should prompt you to enter the date and time when reconfiguring your printer. If this fails, we may need to run a Factory Restore.
How to Perform a Hard Reset:
Turn your printer ON
With the printer ON disconnect the power cable from the rear of the printer for 30 seconds
Plug the power cable back in
The printer should start back up on its own
Once the printer returns to the ready state, try another scan to verify if the time and date stamp is correct
Should the issue persist, please proceed with the reset below.
How to Restore Factory Defaults:
Turn your printer ON
Touch the right arrow button until you see Setup (wrench)
Touch the Setup button
Select Tools
Select Restore Factory Defaults
Choose Yes
Once the Restore is complete your printer should start back up and may prompt you to enter the date and time.
Please let me know if these steps work for you. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

MRP run details(date and time when MRP was run)

Similar Messages

Maybe you are looking for