MRP run error Message: 64

Dear All gurus,
At the time of running MRP, getting some planned order with error message 64: Production finish after order finish.
Henceforth the basic date of planned order comes less than production order date.
Whereas any schedule margin key is not maintaining for the material.
Looking for a solution.
Thanks,
Das

Hi,
Go through the below thread and revert.
Re: MRP Exception Message 64
Regards,
Rohit.

Similar Messages

MRP giving error message

MRP giving error message
1) No rows in Item Master
2) Bill Level generation failed
However Item master is well defined.
need help urgently.
Thanx in advance.
Deven

Dear Dinesh,
I allready checkd my item its active & inventory item. What do u mean by inactive_ind flag not set up right, can u giv me some idea on that setup.
by the way i allready raise SR for this. & oracle had suggestd me a patch.

MRP Run error

Hi,
I have created a material with
MRP type - PD
MRP Controller - 000
Lot Size - ES
I have created a sales order and MRP tpe determined as 041.
Now when i do MD05 for this material system is showing as " No MRP list exists"
I have changed MRP type in the sales order to 031 and run MD05 again. Same thing happend
Can anyone suggested me the reason?
Thank you
ANil

Hi allan
After MRP run the system has to create planning proposals and dependent requirements. There will be number ranges for plan order, PR and depedent requirement.
One of the number ranges has been completed. So it is giving the error message.
Go to plant parameter number anges setting and findout which has crooss the upper limit. And create ner number ranges for that one.
Hope this will clear.
Regards
J .Saravan

How can I stop from getting the "Firefox is already running" error message when trying to open links and FF has already been opened through a symbolic link?

I use symbolic links and program shortcuts as a way to easily open different Firefox profiles ie. one for casual/personal use and another for work. This works well, but I get the "Firefox is already running, but is not responding" error message if I try to open external links with FF as my default browser. FF is actually open and running fine, but I guess it doesn't acknowledge this fact because of how I'm originally starting the process.
I wasn't able to add the symbolically linked executables to the default program pane. Is there a way to bypass this error or other way to fix this?
The solution to the question linked below is what I'm using to open the different FF profiles.
http://superuser.com/questions/255312/pin-same-app-multiple-times-in-windows-7

hello, this is probably happening when you run the default profile with the -no-remote switch.
http://kb.mozillazine.org/Profile_in_use

Firefox does not "close" when closed under Windows 7; Task Manager must be used to "End Process." How do I close Firefox and reopen it without getting a "Still Running" error message?

Even though Firefox has been updated multiple times (currently using Ver. 3.6.13) since I started using Windows 7, I am still unable to totally close it from the toolbar or taskbar. Firefox does closeout on the screen but apparently continues to run in the background. If I open Firefox at a later time, I get an error message stating that Firefox is still running. I then have to go Task Manager to "End Process." Electing to do so allows me to restart Firefox. I never had this problem with Firefox when using Windows XP and I never have this problem with any other software under Windows 7.

https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit

Itunes cannot run error message

Hey fella's I recently have been having trouble with iTunes. I received the error message itunes cannot run because of your audio configuration. i followed the steps to fix that by reinstalling quicktime. Now when i go to open itunes another error message pops up stating "itunes cannot run because some of its required files are missing, please reinstall itunes" i've tryed repairing it and reinstalling it and the same thing continues to reoccur. i've restored my system twice and it still persists. I'm baffled could it be a bug? a virus? I noticed during repair that about 3/4 of the way through, the error message pops up. Any and all help is greatly appreciated!

Hey try opening quicktime. Thats what i did, and after getting it up and running, iTunes started working again.

Depreciation Run Error (Message no. AA693)

Hi,
User has posted an entry to transfer an asset from one companyh code to the new company code into last FY 2010 in P13. This new company code do not have any asset prior to this. When perfomring the depreciation run, an error message was encounter as per below.
Only an unplanned posting run is possible in this fiscal year.
Message no. AA693
Diagnosis
You have already posted in fiscal years that come after 2010. This means that you can only post in the last posting period 012 in fiscal year 2010. Or you can post to a special period, if one is set up. Since you have not posted yet in this fiscal year, you must specify that the depreciation posting run is unplanned.
Procedure
Please check the fiscal year entered. If you are certain you want to post to fiscal year 012, you must start the depreciation posting run in the last posting period (or in the special period). Be sure to indicate that this posting run is unplanned, since it falls outside of the normal posting cycle.
User has tried the various method (Planned, repeat, restart and unplanned) but still got the same message.
Can someone advise urgently ?
Thanks in advance
Ang.

Hi,
I assume you have in 2010, no entry in the table TABA, because you have made no depreciation run in 2010.
I suppose you have already made a depreciation run in 2011 - right?
In this case you can not post in 2010,
In this case we make a dummy entry in the table TABA in 2010 for period 12. Then you can post in the special period in 2010.
regards Bernhard

ILife 06 installation disc won't run/error message

Hi,
a few months ago we bought a macbook which came with iLife 06. The installation disc for iLife says good for 5 computers in the same household. When I try to install if on our older G4, (running 10.4.8), I put the disc in and I get the following error message when I click on the iLife 06 icon:
"there is no default application specified to open the object "iLife 06"
I've tried repairing permissions, but same thing. Not sure where to go from here...any ideas?
Thanks in advance,
meganou
macbook Mac OS X (10.4.8)

The readme on the install disc says PPC or Intel-based
That answers that query.
Am I in the right forum..?
This is as good as any, since there isn't a dedicated forum to iLife installatiion probems.
Since you get the same result in a new admin account, you might consider reinstalling the latest COMBO update for your machine, restarting, repairing permissions with Disk Utility, and trying again. Report back.

MRP Areas error message

Hi
In implementing MRP areas, we created and assigned MRP area to material and later on deleted the config for the MRP area definition without deleting it from material master. We get an error message MD318 - MRP area has not been defined, which is an internal error, there is no oss note fixes for this issue but OSS note exists for MD319...can anyone please suggest me any options to resolve this error.

Dear Sender,
I was checking answer for the same error. and I saw this note. the answer may not be useful as it was in 2011, could be helpful for other checking current and in future.
I resolved by configuring the MRP area in MDLV table along with the MRP Parameters for the plant.
The Products created already without the MRP area were updated as MRP area at plant level for our scenario.
Thanks
Muthu

CS6 package has stopped running - Error Message 1

I'm in a School. We have the CS6 Suite and it has been perfect but on one Windows 7 Pro 64 bit client it's stopped running. It comes up with Error Message 1 telling to uninstall and reinstall it. However, trying to Uninstall fails. Trying to reinstall using the installer fails as well.
I'm wondering if my only option is to format the disk and reimage?
Message was edited by: Geoff Brewer

Was that a typo and you meant NOT all documents?
Windows isn't quite as easy to diagnose crashes as Mac becuase it doen't providet he same crash reports, so we pretty much have to play Twenty Questions...
Let's start with some basic troubleshooting. Presuming this is isolated to just some files, start with this: Remove minor corruption by exporting
If that doesn't work, can you export half of the doc at a time?
Create a new user account onthe machine and log in using that. Are you able to export the document to PDF without a crash?

Depreciation Run Error Message Error 0()

We imported Fixed Assets at a client using the importation utility in the FA module. Then we are trying to do the Depreciation Run for the first time and we are getting the following error message "The depreciation run 100000010 failed and has been cancelled. Error 0()".
May anyone help on how to solve the error.
Edited by: Tendayi Chidawanyika on Jan 29, 2009 3:11 PM

Have you changed the status of the module from Transfer to Production in the Administration > Company details?

Payment Run Error Message - Min amount for pymt has not been reached

Dear Forum,
The users are trying to create the payment run and in case of one of the Vendors, the amount is very small - SGD 3.00. In case of this Vendor the system is giving the error message "Minimum amount for payment has not been reached". When we look at the Payment Method in FBZP we find that the minimum amount defined is SGD 1. Even then the system is giving the error message. What else needs to be checked? Would appreciate your help.
Thanks!
Regards

Hi,
IN FBZP two place the min amount needs to be given,
paying company code and then payment method in in company code....refer both places
Raja.A

MRP Run error " Schedule Lines not generating properly"

Hi Folks,
I am facing a typical issue with MRP Run.
Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
Note that the initial settings during MD02 remain same for all run.
I want only schedule lines to be generated but not PR.
Pls advise and provide input where the wrong might be.
Quick responce would be appreciated.
Regards
Shash

Dear shash,
Check with What are the MRP control Parameters values which you are using for the MRP run.
In MD02, For Deleivery schedules run with value 3 - That's - Schedule lines.
The other options are 1 No schedule lines
2 Schedule lines in the opening period.
check with this & revert back.
Regards
Mangalraj.S

MRP Run Error creating Requisitions instead Schedule Lines

Hi Folks,
I am facing a typical issue with MRP Run.
Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
Note that the initial settings during MD02 remain same for all run.
I want only schedule lines to be generated but not PR.
Pls advise and provide input where the wrong might be.
Quick responce would be appreciated.
Regards
Shash
Edited by: Shash on Sep 19, 2008 1:10 PM

Can you please tell me how you solved the problem as i have the same problem .
Quick response will be a boon.
Regards
Raj

My latest itune update wil not run, error message An

My latest itunes update will not run, erro message reads An application has made an attempt to load the C runtime library incorectly.

Hi,
In addition to what Lewis mentioned, please also take a try with the following suggestions:
Method 1.
Change the settings to "Never check for updates (not recommended)", click OK, and then change it back to "Install updates automatically". After that, click check for updates.
Method 2.
Update Windows Defender first:
1. Make sure time is sync. 2. Update Windows defender first, then click check for updates.
Method 3. rebuild the SoftwareDistribution folder:
Goto start > type services.msc
Scroll down to find Windows Update service
make sure Windows Update service is stopped, else right click and stop it
Go to C:\Windows\SoftwareDistribution\ and delete all files in it
Come back to services.msc and start Windows Update
service
Hope this may help
Best regards
Michael Shao
TechNet Community Support

MRP run error Message: 64

Similar Messages

Maybe you are looking for