MRP status F is not visible
Hi all,
Hope somebody can help me in this issue. I have created a sales order for a material which already has some stock and I have done the allocation run. And the allocation was successfully carried out but still my sales order number is appearing in MRP status T not in F. What could be the reason and what I should do to proceed further?
let me tell you one more thing is when i change screen resoloution it shows me that status bar but when i recall this screen or another screen the status bar is hide, please let me know if i miss any setting or configuration
Similar Messages
-
" change" button not visible in check status ?
HI,
We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
is visible in check status even if shopping cart is under approval
state.
But in SRM 5.0 "change" button is not visible in check status if
Shopping cart is under approval state.
Please let me know if any one face this issue.Hi,
Goto SU01 and fill in the user ID for which the button is greyed.
Navigate to role tab
Double click on the role so that the system opens transaction PFCG
Select the "personnalization" tab where you will find the WFL security... (don't remember exactly the name as i do not have any system right now)
This WF security has 4 level.
By default it is set to none
Select level 4 for maximum authorization.
Save, log-off from ITS access et relogon.
Then the button won't be greyed anymore
Kind regards,
Yann -
"change" button is not visible in check status ?
HI,
We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
is visible in check status even if shopping cart is under approval
state.
But in SRM 5.0 "change" button is not visible in check status if
Shopping cart is under approval state.
for this i have raised OSS message. SAP replied that "please increase the security level of the buyer from 1 (= no changes
allowed) to at least 2 (=low)."
please let me know where exactly i can change this settings?
Thanks
Venkatesh PHi Venkatesh,
Steps :
1) Go to SU01 of the buyer
2) Go to Personalization tab
3) Double click on Personalization object key 'BBP_WFL_SECURITY'
You will get a pop up for 'Authorization level for Authorization'
4) Here change the securtiy level from 1(=no changes allowed) to at least 2(=low)
<b>Reward points for helpful answers</b>.
Regards,
Andy -
AFS material-/mrp-status not active for plant.
Hello Everyone
I am facing an issue while executing the sales order
Issue :AFS material-/mrp-status not active for plant..
CAN ANY ONE RESOLVE THIS...
Regards,RajneeshHi Rajneesh,
Tht prb might be the material master.
Goto Material master, select AFS MRP View and activate/ press the AFS MRP status button and save.
Reward with points if it is helpful
Kishore -
Data loaded in Infocube is not visible in the Reporting
Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
GirikumarHi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh.. -
Open PO item is not visible in MD04
Dear Expert,
We have one scenario that one PO contain 3 line item which having Open PO Qty. but for line item 20 we have completed open qty i.e.40 & PR is also there. but it is not showing in MD04 & Also not visible in MIGO while doing GR
so please suggest what we need to do this will be visible.
Regards,
IshwarDear Subhash,
Thanks for your reply
Status of line item is OPEN
Changes has been done in PO & also Version is set with Completed Indicator
Plz suggest
Regards,
Ishwar -
Agent is not visible in Cisco Supervisor Desk Top
Agent is not visible in Cisco Supervisor Desk Top
Problem Details: UCCX 5.0(2)SR02_Build045
CUCU 6.1.4
For some reason I can not get one of my agents to show up in Cisco Supervisor Desk Top
I have never had a problem like this before. I configured this phone and agent just like
all the others. The following is a list of items I have checked and double-checked.
CM user and Password
ICD One Button Logon
UCCX, Teams, Resources and Q’s
IPCC directory number
RMCM App User Association
Skills
Deleted user and re added user
I also did the following:
From my PC telnet to UCCX Server port 5900, Successful
From my Server telnet to my phone xxx.xxx.xxx.xxx 59021 and 59020 not successful
My phone and agent work fine.
I shut off my virus protection and had the same results
Most of the PC’s and phones in my environment had separate Ethernet ports and they show up just fine in the Cisco Supervisor Desk Top
Does anyone have any experience with this? Thanks, TomHello Tom,
In this case what you should try to telnet into that specific port is the Agents PC where the CAD software is running, this ports are use by the UCCX for the chat service. this service is the one that handles not oly the chat feature between the agents but also the agent status in the suppervisor desktop.
Please follow this document, and test again the connectivity.
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008035309f.shtml
Another important detail to check is if the Agents Pc has the Windows Firewall running or any anti virus software that could block the ports as well
HTH
Please rate this post if was helpful
Walter Solano
CCNA Voice
Cisco UCCX Specialist -
Work items are not visible UWL task are visible in tracking in portal
HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik RafiHi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S -
Credit control field not visible in customer master after checking Spro
Hello Gurus,
I have configured Automatic Credit Control In IMG.
I have checked all the necessary spets required for the avtivation of Automatic Credit Control.
But I am facing in problem and will appreciate all your help for this problem.
In Customer master> Sales area data> Billing Document--> delivery and payment terms. Within delivery and payment terms the feild for credit control area is not visible.
I have checked in spro>financial accounting> Ac rec & Ac payable>customer account>master data>preparation for creating customer master> define account groups with screen laypouts (customers).
Within Define account groups with screen laypouts (customers)>account group 001(soldtoparty)details>field status>sales data>billing-->Hedging and credit contr. area I have tried it with optional as well as reuired entry and still the credit control field is not visible in customer master.
Pls provide me the steps as well as solutions for the problem.
Thanks & regards,
Dev.pls check accunt group again
rgds
nitin -
The progress bar (in green)which was visisble at the right hand side down in Firefox 3.6.8,is not visible here which seems little unfriendly.Or is it available(may be there is some settings i have to apply)?Please tell me if it is available in this version or not,and if yes then how to bring it.Thanks!
You can add the progress indicator in the Firefox 4 add-ons bar with the [https://addons.mozilla.org/firefox/addon/status-4-evar/ Status-4-Evar] add-on
-
Button not visible in standard sap-toolbar
Hi All,
I have added a custom key to standad SAP tollbar using Aceess key in tr-M52N.
But that custom buttom is still not visible in tool bar. Can anybody guide me?Hi,
It may be that the function is being disabled by authorizations. To prove this, you could do the following...
Before you run the transaction you modified, go into debug with /h.
Run your transaction code - you should start up in debug.
Use menu option Breakpoints / Breakpoint At / Statement. Input the command SET PF-STATUS.
Hit F8 to continue until the SET PF-STATUS command is found.
At this point, if the SET PF-STATUS statement ends with EXCLUDING tablename (where tablename is an internal table), then double-click on the internal table and display the entries in it. If your function code is included in this table then that's the reason why you don't see the button. You'd then need to work back to determine why your function code is included in the internal table. This assumes the function code does indeed already exist in the GUI status used in the screen.
Regards, Andy -
Message processing not visible in RWB Message monitoring
Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.KThere is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database". -
MSPS 2013 - related a document to the project tasks - Icon is not visible in project schedule
When adding a document (related Items) to the project tasks in a project schedule at the task does not see the icon of the document.
Although the icon issue or risk when binding is visible.
And the icon is also seen in the "Projects Center"
Also related items are not visible in the "Tasks" (http://server/PWA/Tasks.aspx) from the user.
Attachments
View, add or edit related information such as documents, issues, or risks.
Issues
Title
Due Date
Status
Risks
Title
Due Date
Status
Documents
Title
File Name
Status
Maybe someone know why it don't works?Anyone can reproduce this steps on Project Server 2013:
* Upload document to project site document library
* Open project plan for editing in pwa, add to any task related item – uploaded in previous step document
* Save and publish project
Than check in project schedule and project center – icon associated document to task and project. -
Execution Plan Run is not visible in Current Run tab
Hi,
I have created the EP and I have build the EP successfully. After that I am clicking on the Run tab. It says the task has been submitted succesfully to the DAC server.
But, when I am seeing the status in the Current Run tab and also in the Informatica Monitor, My EP run was not visible. There is no record created for this run in the Current Run tab.
Anyone has faced this kind of issue earlier. Please advice me how to resolve this issue.
Regards,
SaleemSaleem its strange. I did not came across this any time. Is it happening for all the Execution Plan's. By restarting the DAC server is it working. Sometimes we may face these kind of problems with DAC and with restart most of them will be resolved. If it gives problem always then there is somthg wrong i believe.
-
After EM agent installation, only database is not visible in EM Grid Contro
Dear All,
I am using Oracle 10g2 database. I have a problem with EM agent configuration. After installation the database (SID=BITEX) is not visible in the EM Grid Control, which is installed on the other host. Listener, ASM and host are visible and show actual state, only database instance is missing . Below, I attached some output from the listener, agent and targets.xml
Thanks fro any advice
Groxy
Output from "lnsnctrl status":
oracle@bitex2:~/product/10.2/db_1/bin> lsnrctl status
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-DEC-2007 14:33:35
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.2.0 - Production
Start Date 05-DEC-2007 14:17:14
Uptime 0 days 0 hr. 16 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/product/10.2/db_1/network/admin/listener.ora
Listener Log File /opt/oracle/product/10.2/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "BITEX.WORLD" has 1 instance(s).
Instance " BITEX ", status READY, has 1 handler(s) for this service...
Service " BITEXXDB.WORLD" has 1 instance(s).
Instance "SA BITEX NEX", status READY, has 1 handler(s) for this service...
Service " BITEX _XPT.WORLD" has 1 instance(s).
Instance " BITEX ", status READY, has 1 handler(s) for this service...
The command completed successfully
oracle@ bitex2:~/OracleHomes/agent10g/bin> ./emctl status agent
./emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.2.0
OMS Version : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home : /opt/oracle/OracleHomes/agent10g
Agent binaries : /opt/oracle/OracleHomes/agent10g
Agent Process ID : 22193
Parent Process ID : 22177
Agent URL : https://bitex2.bitex.com:3872/emd/main/
Repository URL : https://grid. bitex.local:1159/em/upload
Started at : 2007-12-05 14:25:46
Started by user : oracle
Last Reload : 2007-12-05 14:25:46
Last successful upload : 2007-12-05 14:33:32
Total Megabytes of XML files uploaded so far : 1.84
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 50.69%
Last successful heartbeat to OMS : 2007-12-05 14:33:51
Agent is Running and Ready
/opt/oracle/OracleHomes/agent10g/sysman/emd/targets.xml
<Targets AGENT_TOKEN="05b0697c77651ee3933abf6fa56180dd62c4be3b">
<Target TYPE="oracle_emd" NAME="bitex2.bitex.com.pl:3872"/>
<Target TYPE="host" NAME="bitex2.bitex.com.pl"/>
<Target TYPE="oracle_database" NAME="BITEX.WORLD">
<Property NAME="MachineName" VALUE="bitex2.bitex.com.pl"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="BITEX"/>
<Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
<Property NAME="UserName" VALUE="f614471b2cb8c5b7" ENCRYPTED="TRUE"/>
<Property NAME="password" VALUE="0d16396a5b89b576b58f90a69cbd2c55" ENCRYPTED="TRUE"/>
<Property NAME="ServiceName" VALUE="BITEX.WORLD"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_bitex2.bitex.com.pl">
<Property NAME="Machine" VALUE="bitex2.bitex.com.pl"/>
<Property NAME="LsnrName" VALUE="LISTENER"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
<Property NAME="ListenerOraDir" VALUE="/opt/oracle/product/10.2/db_1/network/admin"/>
</Target>
<Target TYPE="osm_instance" NAME="+ASM_bitex2.bitex.com.pl">
<Property NAME="SID" VALUE="+ASM"/>
<Property NAME="MachineName" VALUE="bitex2.bitex.com.pl"/>
<Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
<Property NAME="UserName" VALUE="SYS"/>
<Property NAME="password" VALUE="0d16396a5b89b576b58f90a69cbd2c55" ENCRYPTED="TRUE"/>
<Property NAME="Role" VALUE="SYSDBA"/>
<Property NAME="Port" VALUE="1521"/>
</Target>
</Targets>I don't see where your listener hostname matches hostname for your agent, thus agent discovery might have issue putting two and two together. Thus, the need to add it manually, or adjust it in targets.xml file first.
reference
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
Agent URL : https://bitex2.bitex.com:3872/emd/main/
Maybe you are looking for
-
Excel VBA: Getting error 1004 using APPLICATION.RUN to run a macro
I'm getting a 1004 error when my ADDIN tries to launch a macro already in a workbook . The macro resides in a workbook (on disk before it was opened in this session) and the addin opened the workbook, updated some data fields in spreasheets in t
-
Should I upgrade the hardware or replace the laptop?
I have a late 2006 model Macbook that I received in Decemeber 2006. I'm interested in purchasing a new Macbook, but am also wondering whether I should instead upgrade the hardware? The Macbook seems to always be pushing itself harder than it should a
-
Is there any way to link page number with the reference page number within text in InDesign CC and CS6?
-
How to do CHECK IN the files for the document?
Hi , By using BAPI_DOCUMENT_CHECKIN2 Function module I am uploading the Files for the Document number. My problem is - After uploading the files to the document number the files are not in check in status. I want the files to be checked in after uplo
-
Unique or primary key on timestamp with timezone
Hi, I have been experimenting with a date column in a primary key, or actually I tried using a timestamp with time zone in a primary key. While researching whether there was a way to avoid ORA-02329, I found the following: K15> create table dumdum