MRP Type field on Material Master Data
<DELETED>
Duplicate [thread|Message control by Material type;
This thread being locked.
Please do not post duplicate threads
-Paul
Moderator
Edited by: Paul Meehan on Jul 31, 2009 4:22 PM
Hi,
As per my knowledge, if you want to valuate your account assigned category "E" (Sales Order) order and you want to valuated this differently (other than make-to-stock) you can assign additional (valuation class i.e. EKLAS) in accounting view.
Hope this helps!
Reetesh
Similar Messages
-
MM Manage mandatory field in material master data
Hi,
i need to manage some fields in MM01 and MM02 in order to have these fields mandatory if other fields have particular value. For example, if material type is ZFER and Prod.hierarc (in Basic Data 1) is AL001, only in this case i want that field Comm./imp. code ,in view Foreign Trade import, is mandatory.
I'm looking for an user-exit. I find EXIT_SAPLMGMU_001 but with this solution i have a problem. The mandatory of field is active only during saving, on the contrary i would like that this mandatory will be similar to the standard.
Thanks for help,
Michele GarofaloHi,
I would like to make a field mandatory in Master Data.....how can i make a field mandatory field?
please provide me solution for this one
Cheers... -
MM - Material master data - move standard field to another view
Hi everyone,
ÉCC 6.0 - release 7.0.
I've been adding many custom fields in Material master data MM01/02/03. Now I got a problem because we have to use a standard field in another view.
The field MARA-HERKL is set up to 'SV'(attribute V_130F-PSTAT):
Warehouse management = S
Sales = V
I want to add 'K - Basic data' in this field's attribute at OSMR Tcode , but this attribute is disactivated. I can not change this value.
I've check this note 306966 that mention: You cannot create new entries and delete entries in client 000. This client contains only the entries delivered by SAP which are used for distinguishing customer-specific fields and SAP standard during the maintenance of the other clients.
Is there any problem whether I delete this field and afterwards create it with the new values?
I'm not in client 000. So, I want to just make sure I will do a legal change.
thank you in advance,
AlexandreNone tips, Closed.
-
New fiel in material master data
Hello,
We need a new field in material master data, Can I define a new append in mara table?.
Then, we are thinking in modify screen of basis data?
Anybody know if this is posible?
Thanks.Hi Rafael Murillo,
New field Custom field can be created and added to existing SAP STD Tables like MARA, MARC,MVKE etc..
All depend updates upon the exact Business requirement.
If the new filed is applicable for a specific sales org. specific, then you new to insert that filed in sales View 1/2,,,
In that case new filed should be insearted at MVKE level.
And you to use any of the Sub screens at sales level..need to to the IMG changes also.
For ex. you have material group 1, material group 1 ..this full sub screen is useful for most of the client..
you can replase this sub screen..
create your sub screen with your custom field using z program and replace the program in IMG.
Thanks,
Kumar Arcot -
Nessessary Field Required in Master Data to run Of MRP
Dear All
As Per The Requirement of MRP Whats the nessessary Field fillup in Master Data Of a Particular Finished Product & Also Raw Material.
Thanks
Pankaj AgarwalHi Pankaj,
For MRP Type PD, other important fields for MRP are
MRP1
- Lotsize
- MRP Controller (Reporting purpose)
- MRP Group (Generally not a mandatory field) but certain parameters can be defaulted in configuration for an MRP group.
MRP2
- Procurement type
- Special Procurement type (if special planning process is going to be used)
- Inhouse Prodn / Planned delivery time
- Schedule margin key
- Safety Stock details if safety stock is planned for material
MRP3
- Strategy Group
- Consumption mode and Forward consumption and Backward consumption details if it is a MTS strategy used.
- Availability check (Group)
MRP4
- BOM Selection method
- Individual and Collective indicator
Hope this helps....Reward your points....,
Regards,
Prasobh -
Message Type for Material Master Data Changes
Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa -
How to delete MRP view data after create in Material master data ?
Hi all ,
After user create a useless MRP view data in Material master data , how to remove it ?Hi
Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
Give the necessary data that is needed for the view you want to delete.
Press and flag the view you want to delete.
Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
regards
Anand -
Combination of two material master data fields
Hello,
is there a possibility to combine two fields in the material master data?
I want to combine the "do not cost" in view Costing 1 with the "price control".
In case of price control = "V" I want to set the "do not cost" flag and in case of price control = "S" I want to delete the flag automatically.
Is it possible to combine these fields?
Thank you for any answer & regards
BrittaHi Britta,
Try the user-exit: MGA00001
I think you should be able to manage with it. Check & revert.
Regards,
Vivek -
Transportation group field in Material master..Sales/Plant data tab.
Hello Gurus,
The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
Hope to hear from you soon as its a very high priority production issue..
regards
RikinlThe transportation group field in material master is Material specific or a plant specific??
Its material specific. Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
thanks
G. Lakshmipathi -
About material master data batch input
hello
i wrote a batch input for material master data. but it can't work ,i can't use it to create material.hope someone help me!thanks.code is below.
report z_mat_batchinput no standard page heading
line-size 255 message-id YB.
mat batch input
include bdcrecx1.
include .
tables: mara,marm,MARC,MARD,T134,NRIV,T006A,T023,T001W,T001L,
TVKO,TVTW,T025,TTGR,TLGR,TVKWZ,T006.
data: DIMID like t006-DIMID.
data: flag, K, tmp.
DATA: X TYPE I.
************ÉÏÔØÎļþÄÚ±í************************
data: begin of record occurs 0,
MATNR(018), " ÎïÁϺÅ
MTART(004), " ÎïÁÏÀàÐÍ
**generaldata1**
MAKTX(040), " ÎïÁÏÃèÊö
EAKTX(040), " Ó¢ÎÄÃèÊö
MEINS(003), " »ù±¾¼ÆÁ¿µ¥Î»
MATKL(009), " ÎïÁÏ×é
BISMT(018), " ¾ÉÎïÁϺÅ
EXTWG(018), " ÍⲿÎïÁÏ×é
SPART(002), " ²¿ÃÅ
MTPOS_MARA(004), " ÆÕͨÏîÄ¿Àà±ð×é
BRGEW(017), " ëÖØ
GEWEI(003), " ÖØÁ¿µ¥Î»
NTGEW(017), " ¾»ÖØ
VOLUM(017), " Ìå»ý
VOLEH(003), " Ìå»ýµ¥Î»
GROES(032), " Á¿¸Ù
MAGRV(004), " ÎïÁÏ×éµÄ°ü×°Îï
**generaldata2**
NORMT(018), " ¹¤Òµ±ê×¼ÃèÊö
FERTH(018), " ÀàÐÍ
WRKST(048), " ¹æ¸ñ
**generaldata1**
EAN11(018), " ²úÆ·±íʶÂë
**generaldata2**
ZEIAR(003), " ÎĵµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜתÆÚ
WERKS(004), " ¹¤³§
VKORG(004), " ÏúÊÛ×éÖ¯
VTWEG(002), " ·ÖÏúÇþµÀ
**salesorg 1**
VRKME(003), " ÏúÊÛµ¥Î»
VMREN(006), " ÏúÊÛµ¥Î»×ª»»Òò×Ó
VMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SPART(002), " ²úÆ·×é
DWERK(004), " ½»»õ¹¤³§
TAXKM(001), " ÎïÁÏË°·ÖÀà
**salesorg 2**
KONDM(002), " ÎïÁ϶¨¼Û×é
KTGRM(002), " ¿ÆÄ¿ÉèÖÃ×é
MVGR1(003), " ÎïÁÏ×é 1
MVGR2(003), " ÎïÁÏ×é 2
MTPOS(004), " ÏîÄ¿Àà±ð×é
VERSG(001), " ÎïÁÏͳ¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
MTVFP(002), " ¿ÉÓÃÐÔ¼ì²é
XCHPF(001), " Åú´Î¹ÜÀí
YCHPF(001), " ÅúÁ¿¹ÜÀí
TRAGR(004), " ÔËÊä×é
ladgr(004), " ×°ÔØ×é
**pur**
BSTME(003), " ¶©µ¥µ¥Î»
UMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREN(006), " ¶©µ¥µ¥Î»×ª»»Òò×Ó
WEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
EKGRP(003), " ²É¹º×é
LGORT(004), " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
AUSME(003), " ·¢»õµ¥Î»
UMREJ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREF(006), " ·¢»õµ¥Î»×ª»»Òò×Ó
XCHPF(001), " ÅúÁ¿¹ÜÀí
**MRP 1**
DISGR(004), " MRP×é
DISMM(002), " MRPÀàÐÍ
FXHOR(003), " ¼Æ»®µÄʱ½ì
DISPO(003), " MRP¿ØÖÆÕß
DISLS(002), " ÅúÁ¿
MAABC(001), " ABC±êʶ
BSTFE(018), " ¹Ì¶¨ÅúÁ¿´óС
**MRP 2**
RESKZ(001), " »ñÈ¡ÀàÐÍ
BESKZ(001), " ²É¹ºÀàÐÍ
SOBSL(002), " ÌØÊâ²É¹ºÀà
LGPRO(004), " ·¢»õ²Ö´¢µØµã
RGEKZ(001), " ·´³å
PLIFZ(003), " ¼Æ»®½»»õʱ¼ä
VEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
DZEIT(008), "×ÔÖÆÉú²ú
FHORI(003), " ¼Æ»®±ß¼ÊÂë
EISBE(018), " °²È«¿â´æ
**MRP 3**
PERKZ(001), " ÆÚ¼ä±êʶ
STRGR(002), " ²ßÂÔ×é
VRMOD(001), " ÏûºÄģʽ
VINT1(003), " ÄæÏòÏûºÄÆÚ¼ä
VINT2(003), " ÏòÇ°ÏûºÄÆÚ¼ä
NTVFP(002), " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
SAUFT(001), " Öظ´ÖÆÔì±êÖ¾
SFEPR(004), " Öظ´Éú²ú²ÎÊýÎļþ
**¹¤×÷¼Æ»®**
FEVOR(003), " Éú²úµ÷¶ÈÔ±
FRTME(003), " Éú²úµ¥Î»
SMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SMREN(006), " Éú²úµ¥Î»×ª»»Òò×Ó
UEETK(001), " ÎÞÏÞÖƹýÁ¿½»»õ
**»á¼Æ 1**
BKLAS(004), " ÆÀ¹ÀÀà
BWTTY(001), " ¹À¼Û·ÖÀà
VPRSV(001), " ¼Û¸ñ¿ØÖÆ
PEINH(006), " ¼Û¸ñµ¥Î»
VERPR(015), " Òƶ¯Æ½¾ù¼Û
STPRS(015), " ±ê×¼¼Û
**»á¼Æ 2**
BWPRH(014), " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
LOSGR(018), " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
ZPLP1(014), " ¼Æ»®¼Û¸ñ 1
ZPLD1(010), " ¼Æ»®ÈÕÆÚ 1
**qm**
ART1(8), "¼ìÑéÀàÐÍ1
AKTIV1(1), "ÒѼ¤»î
QMPUR(1), "¼¤»î²É¹ºÖÐµÄ QM
SSQSS(8), "QM ¿ØÖÆÂë¡¢
QMATV(8), "QM¼ìÑéÉèÖÃ
ART2(8), "¼ìÑéÀàÐÍ2
AKTIV2(6), "ÒѼ¤»î
ART3(8), "¼ìÑéÀàÐÍ3
AKTIV3(6), "ÒѼ¤»î
end of record.
************ÏÂÔظñʽ/´íÎóÎļþÄÚ±í**************
data: begin of record1 occurs 0,
MATNR(018), " ÎïÁϺÅ
MTART(008), " ÎïÁÏÀàÐÍ
**»ù±¾Êý¾Ý1**
MAKTX(040), " ÎïÁÏÃèÊö
EAKTX(040), " Ó¢ÎÄÃèÊö
MEINS(013), " »ù±¾¼ÆÁ¿µ¥Î»
MATKL(009), " ÎïÁÏ×é
BISMT(018), " ¾ÉÎïÁϺÅ
EXTWG(018), " ÍⲿÎïÁÏ×é
SPART(002), " ²¿ÃÅ
MTPOS_MARA(004), " ÆÕͨÏîÄ¿Àà±ð×é
BRGEW(017), " ëÖØ
GEWEI(008), " ÖØÁ¿µ¥Î»
NTGEW(017), " ¾»ÖØ
VOLUM(017), " Ìå»ý
VOLEH(008), " Ìå»ýµ¥Î»
GROES(032), " Á¿¸Ù
MAGRV(014), " ÎïÁÏ×éµÄ°ü×°Îï
**»ù±¾Êý¾Ý2**
NORMT(018), " ¹¤Òµ±ê×¼ÃèÊö
FERTH(018), " ÀàÐÍ
WRKST(048), " ¹æ¸ñ
**»ù±¾Êý¾Ý1**
EAN11(018), " ²úÆ·±íʶÂë
**»ù±¾Êý¾Ý2**
ZEIAR(003), " ÎĵµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜתÆÚ
WERKS(004), " ¹¤³§
VKORG(008), " ÏúÊÛ×éÖ¯
VTWEG(008), " ·ÖÏúÇþµÀ
**ÏúÊÛ×éÖ¯ 1**
VRKME(003), " ÏúÊÛµ¥Î»
VMREN(006), " ÏúÊÛµ¥Î»×ª»»Òò×Ó
VMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SPART(006), " ²úÆ·×é
DWERK(008), " ½»»õ¹¤³§
TAXKM(010), " ÎïÁÏË°·ÖÀà
**ÏúÊÛ×éÖ¯ 2**
KONDM(010), " ÎïÁ϶¨¼Û×é
KTGRM(010), " ¿ÆÄ¿ÉèÖÃ×é
MVGR1(003), " ÎïÁÏ×é 1
MVGR2(003), " ÎïÁÏ×é 2
MTPOS(010), " ÏîÄ¿Àà±ð×é
VERSG(001), " ÎïÁÏͳ¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
MTVFP(010), " ¿ÉÓÃÐÔ¼ì²é
XCHPF(008), " Åú´Î¹ÜÀí
YCHPF(001), " ÅúÁ¿¹ÜÀí
TRAGR(006), " ÔËÊä×é
ladgr(006), " ×°ÔØ×é
**²É¹º**
BSTME(003), " ¶©µ¥µ¥Î»
UMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREN(006), " ¶©µ¥µ¥Î»×ª»»Òò×Ó
WEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
EKGRP(006), " ²É¹º×é
LGORT(004), " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
AUSME(003), " ·¢»õµ¥Î»
UMREJ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREF(006), " ·¢»õµ¥Î»×ª»»Òò×Ó
XCHPF(001), " ÅúÁ¿¹ÜÀí
**MRP 1**
DISGR(004), " MRP×é
DISMM(009), " MRPÀàÐÍ
FXHOR(003), " ¼Æ»®µÄʱ½ì
DISPO(011), " MRP¿ØÖÆÕß
DISLS(004), " ÅúÁ¿
MAABC(007), " ABC±êʶ
BSTFE(018), " ¹Ì¶¨ÅúÁ¿´óС
**MRP 2**
RESKZ(001), " »ñÈ¡ÀàÐÍ
BESKZ(008), " ²É¹ºÀàÐÍ
SOBSL(002), " ÌØÊâ²É¹ºÀà
LGPRO(004), " ·¢»õ²Ö´¢µØµã
RGEKZ(001), " ·´³å
PLIFZ(012), " ¼Æ»®½»»õʱ¼ä
VEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
DZEIT(008), "×ÔÖÆÉú²ú
FHORI(010), " ¼Æ»®±ß¼ÊÂë
EISBE(018), " °²È«¿â´æ
**MRP 3**
PERKZ(008), " ÆÚ¼ä±êʶ
STRGR(006), " ²ßÂÔ×é
VRMOD(001), " ÏûºÄģʽ
VINT1(003), " ÄæÏòÏûºÄÆÚ¼ä
VINT2(003), " ÏòÇ°ÏûºÄÆÚ¼ä
NTVFP(010), " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
SAUFT(001), " Öظ´ÖÆÔì±êÖ¾
SFEPR(004), " Öظ´Éú²ú²ÎÊýÎļþ
**¹¤×÷¼Æ»®**
FEVOR(003), " Éú²úµ÷¶ÈÔ±
FRTME(003), " Éú²úµ¥Î»
SMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SMREN(006), " Éú²úµ¥Î»×ª»»Òò×Ó
UEETK(001), " ÎÞÏÞÖƹýÁ¿½»»õ
**»á¼Æ 1**
BKLAS(006), " ÆÀ¹ÀÀà
BWTTY(001), " ¹À¼Û·ÖÀà
VPRSV(008), " ¼Û¸ñ¿ØÖÆ
PEINH(008), " ¼Û¸ñµ¥Î»
VERPR(015), " Òƶ¯Æ½¾ù¼Û
STPRS(015), " ±ê×¼¼Û
**»á¼Æ 2**
BWPRH(014), " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
LOSGR(018), " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
ZPLP1(014), " ¼Æ»®¼Û¸ñ 1
ZPLD1(010), " ¼Æ»®ÈÕÆÚ 1
**ÖÊÁ¿¹ÜÀí**
ART1(8), "¼ìÑéÀàÐÍ1
AKTIV1(6), "ÒѼ¤»î
QMPUR(010), "¼¤»î²É¹ºÖÐµÄ QM
SSQSS(8), "QM ¿ØÖÆÂë¡¢
QMATV(8), "QM¼ìÑéÉèÖÃ
ART2(8), "¼ìÑéÀàÐÍ2
AKTIV2(6), "ÒѼ¤»î
ART3(8), "¼ìÑéÀàÐÍ3
AKTIV3(6), "ÒѼ¤»î
end of record1.
selection-screen begin of block 0 with frame title text-001.
selection-screen begin of line .
selection-screen position 1.
parameters: test like rkec1-test .
selection-screen
comment 3(4) text-004 for field test.
selection-screen position 26.
parameters: oldfile like rlgrap-filename.
selection-screen
comment 9(17) text-003 for field oldfile.
selection-screen: end of line.
selection-screen begin of line.
selection-screen position 1.
parameters: dnldflag like rkec1-test default 'X'.
selection-screen
comment 3(4) text-005 for field dnldflag.
selection-screen position 26.
parameters: outfile like rlgrap-filename .
selection-screen
comment 9(17) text-006 for field outfile.
selection-screen: end of line.
selection-screen end of block 0 .
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-002.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: GEN1 LIKE RKEC1-TEST.
selection-screen
comment 3(9) text-007 for field GEN1.
selection-screen position 26.
PARAMETERS: GEN2 LIKE RKEC1-TEST.
selection-screen
comment 28(9) text-008 for field GEN2.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: SALORG1 LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-009 for field SALORG1.
selection-screen position 26.
PARAMETERS: SALORG2 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-010 for field SALORG2.
selection-screen position 51.
PARAMETERS: SALPLANT LIKE RKEC1-TEST.
selection-screen
comment 53(19) text-011 for field SALPLANT.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: PURCHASE LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-012 for field PURCHASE.
selection-screen position 26.
PARAMETERS: PLTSTRG1 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-018 for field PLTSTRG1.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: MRP1 LIKE RKEC1-TEST.
selection-screen
comment 3(4) text-013 for field MRP1.
selection-screen position 13.
PARAMETERS: MRP2 LIKE RKEC1-TEST.
selection-screen
comment 15(4) text-014 for field MRP2.
selection-screen position 26.
PARAMETERS: MRP3 LIKE RKEC1-TEST.
selection-screen
comment 28(4) text-015 for field MRP3.
selection-screen position 37.
PARAMETERS: MRP4 LIKE RKEC1-TEST.
selection-screen
comment 39(4) text-016 for field MRP4.
selection-screen position 51.
PARAMETERS: PLANTSTR LIKE RKEC1-TEST.
selection-screen
comment 53(8) text-017 for field PLANTSTR.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: QAU LIKE RKEC1-TEST.
selection-screen
comment 3(8) text-023 for field QAU.
selection-screen position 13.
PARAMETERS: ACC1 LIKE RKEC1-TEST.
selection-screen
comment 15(5) text-019 for field ACC1.
selection-screen position 26.
PARAMETERS: ACC2 LIKE RKEC1-TEST.
selection-screen
comment 28(5) text-020 for field ACC2.
selection-screen position 37.
PARAMETERS: COR1 LIKE RKEC1-TEST.
selection-screen
comment 39(5) text-021 for field COR1.
selection-screen position 51.
PARAMETERS: COR2 LIKE RKEC1-TEST.
selection-screen
comment 53(5) text-022 for field COR2.
selection-screen end of line.
SELECTION-SCREEN END OF BLOCK 1.
at selection-screen on value-request for oldfile.
call function 'KD_GET_FILENAME_ON_F4'
EXPORTING
mask = ',Îı¾Îļþ(ÖƱí·û·Ö¸ô),*.txt'
static = 'X'
CHANGING
file_name = oldfile.
at selection-screen on value-request for outfile.
call function 'KD_GET_FILENAME_ON_F4'
EXPORTING
mask = ',Microsoft Excel¹¤×÷²¾,*.xls'
static = 'X'
CHANGING
file_name = outfile.
initialization.
******µÃµ½ÎļþĿ¼*******
call function 'WS_QUERY'
EXPORTING
query = 'CD'
IMPORTING
return = outfile.
if sy-subrc <> 0.
message e005 with outfile.
endif.
oldfile = outfile.
concatenate outfile 'mat_fat' into outfile.
*ÅúÊäÈëĬÈÏÃû³Æ
group = 'MATBATCHIN'.
start-of-selection.
if dnldflag eq 'X' and not ( outfile is initial ).
perform download_data.
stop.
endif.
perform upload_data.
if test = ' '.
*ÊÓͼ²ÎÊý¼ì²é
IF ( GEN1 NE 'X' AND GEN2 NE 'X' AND SALORG1 NE 'X'
AND SALORG2 NE 'X' AND SALPLANT NE 'X'
AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
AND MRP4 NE 'X' AND PLANTSTR NE 'X'
AND ACC1 NE 'X' AND ACC2 NE 'X'
AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
MESSAGE E000 WITH 'ÇëÑ¡ÔñÐèά»¤ÊÓͼ'.
ENDIF.
perform open_group.
SORT RECORD BY WERKS MATNR.
loop at record.
perform bdc_fill.
perform bdc_transaction using 'MM01'.
clear: bdcdata.
refresh: bdcdata.
endloop.
perform close_group.
else.
perform file_check.
endif.
end-of-selection.
*& Form UPLOAD_DATA
ÉÏÔØÅúÊäÈëÊý¾Ý
--> p1 text
<-- p2 text
form upload_data.
call function 'WS_UPLOAD'
EXPORTING
filename = oldfile
filetype = 'DAT'
TABLES
data_tab = record
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10.
if sy-subrc <> 0.
message E000 with 'ÇëÊäÈëÉÏÔØÎļþ'.
endif.
read table record with key MATNR = '**'.
if sy-tabix lt 1.
message E000 with 'ÉÏÔØÎļþÎļþÍ·ÓëÊý¾ÝÖ®¼äÎÞ**'.
endif.
delete record from 1 to sy-tabix.
endform. " UPLOAD_DATA
*& Form BDC_FILL
ÅúÊäÈë
--> p1 text
<-- p2 text
form bdc_fill.
data: N type I,
M type I,
S_MATNR(018),
test(1) type N.
PERFORM BDC_FILL_INITALSCR. "³õʼÆÁÄ»
tmp = '0'.
condense record-matnr no-gaps.
test = record-matnr(1).
if test <> ''.
M = STRLEN( RECORD-MATNR ).
M = 18 - M.
DO M TIMES.
CONCATENATE '0' RECORD-MATNR INTO S_MATNR.
RECORD-MATNR = S_MATNR.
ENDDO.
endif.
**ÅжÏÎïÁÏ»ù±¾ÊÓͼÊÇ·ñÒѾ±»Î¬»¤¹ý**
SELECT SINGLE * FROM MARA WHERE MATNR = RECORD-MATNR.
IF SY-SUBRC NE 0.
K = '0'.
Else.
condense MARA-PSTAT no-gaps.
N = strlen( mara-pstat ).
M = 0.
record-meins = mara-meins.
do N times.
K = MARA-PSTAT+M.
IF K = 'K'.
EXIT.
ENDIF.
M = M + 1.
enddo.
ENDIF.
IF ( ( GEN1 EQ 'X' OR GEN2 EQ 'X' ) AND SALORG1 NE 'X'
AND SALORG2 NE 'X' AND SALPLANT NE 'X'
AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
AND MRP4 NE 'X' AND PLANTSTR NE 'X'
AND ACC1 NE 'X' AND ACC2 NE 'X'
AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
IF K EQ 'K'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(15)'.
perform bdc_field using 'BDC_OKCODE'
'/N'.
ELSE.
PERFORM BDC_FILL_CHOICEVIEW. "Ñ¡ÔñÊÓͼ
ENDIF.
ELSE.
PERFORM BDC_FILL_CHOICEVIEW. "Ñ¡ÔñÊÓͼ
PERFORM BDC_FILL_ORGVIEW. "×éÖ¯¼¶±ð
ENDIF.
TRANSLATE record-MEINS TO UPPER CASE.
TRANSLATE record-BSTME TO UPPER CASE.
TRANSLATE record-VRKME TO UPPER CASE.
TRANSLATE record-FRTME TO UPPER CASE.
TRANSLATE record-AUSME TO UPPER CASE.
if gen1 eq 'X'.
IF K NE 'K'.
PERFORM GENERALDATA1.
ENDIF.
endif.
if gen2 eq 'X'.
IF K NE 'K'.
perform generaldata2.
ENDIF.
endif.
if salorg1 eq 'X'.
perform salorg1.
endif.
if salorg2 eq 'X'.
perform salorg2.
endif.
if salplant eq 'X'.
perform salplant.
endif.
if purchase eq 'X'.
perform purchasedata.
endif.
if mrp1 eq 'X'.
perform MRP1.
endif.
if mrp2 eq 'X'.
perform MRP2.
endif.
if mrp3 eq 'X'.
perform MRP3.
endif.
if mrp4 eq 'X'.
perform MRP4.
endif.
if PLANTSTR eq 'X'.
perform PLANTSTR.
endif.
if PLTSTRG1 eq 'X'.
perform PLTSTRG1.
endif.
if qau eq 'X'.
perform qualitydata.
endif.
if ACC1 eq 'X'.
perform ACC1DATA.
endif.
if ACC2 eq 'X'.
perform ACC2DATA.
endif.
if COR1 eq 'X'.
perform COR1DATA.
endif.
if COR2 eq 'X'.
perform COR2DATA.
endif.
perform BDC_SAVE.
endform. " BDC_FILL
*& Form GENERALDATA1
Ò»°ãÊý¾Ý 1
--> p1 text
<-- p2 text
form generaldata1.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
"'=ZU01'.
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX. " ÎïÁÏÃèÊö
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
perform bdc_field using 'MARA-MATKL'
record-MATKL. " ÎïÁÏ×é
perform bdc_field using 'MARA-BISMT'
record-BISMT.
perform bdc_field using 'MARA-EXTWG'
record-EXTWG.
perform bdc_field using 'MARA-SPART'
record-SPART.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA.
perform bdc_field using 'BDC_CURSOR'
'MARA-GROES'.
perform bdc_field using 'MARA-BRGEW'
record-BRGEW.
if record-gewei = '' and ( salorg1 = 'X' or salorg2 = 'X'
or salplant = 'X' ).
perform bdc_field using 'MARA-GEWEI'
'KG'. " ÖØÁ¿µ¥Î»
else.
perform bdc_field using 'MARA-GEWEI'
record-GEWEI. " ÖØÁ¿µ¥Î»
endif.
perform bdc_field using 'MARA-NTGEW'
record-NTGEW.
perform bdc_field using 'MARA-VOLUM'
record-VOLUM.
perform bdc_field using 'MARA-VOLEH'
record-VOLEH.
perform bdc_field using 'MARA-GROES'
record-GROES.
condense record-EAN11 no-gaps.
if record-EAN11 <> ''.
perform bdc_field using 'MARA-EAN11'
record-EAN11.
perform bdc_field using 'MARA-NUMTP'
'HT'.
endif.
perform bdc_field using 'MARA-MAGRV'
record-MAGRV.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=ZU02'.
condense record-EAKTX no-gaps.
if record-EAKTX <> ''.
perform bdc_field using 'SKTEXT-SPRAS(2)'
'EN'.
perform bdc_field using 'SKTEXT-MAKTX(2)'
record-EAKTX.
endif.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=MAIN'.
if record-meins <> 'PAK'.
perform bdc_field using 'SMEINH-UMREN(05)'
'1'.
perform bdc_field using 'SMEINH-MEINH(05)'
'PAK'.
perform bdc_field using 'SMEINH-UMREZ(05)'
'1'.
endif.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endform. " GENERALDATA
*& Form generaldata2
Ò»°ãÊý¾Ý 2
--> p1 text
<-- p2 text
FORM generaldata2.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX.
perform bdc_field using 'BDC_CURSOR'
'MARA-NORMT'.
condense record-ferth no-gaps.
if record-ferth <> ''.
perform bdc_field using 'MARA-FERTH'
record-FERTH.
endif.
perform bdc_field using 'MARA-NORMT'
record-NORMT.
perform bdc_field using 'MARA-WRKST'
record-WRKST.
perform bdc_field using 'MARA-ZEIAR'
record-ZEIAR.
ENDFORM. " generaldata2
*& Form salorg1
ÏúÊÛ×éÖ¯ 1
--> p1 text
<-- p2 text
FORM salorg1.
condense RECORD-SPART no-gaps.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'MAKT-MAKTX'
RECORD-MAKTX. " ÎïÁÏÃèÊö
IF K NE 'K'.
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
ENDIF.
perform bdc_field using 'MARA-SPART'
record-SPART. " ²úÆ·×é
perform bdc_field using 'MVKE-DWERK'
record-DWERK. " ½»»õ¹¤³§
PERFORM BDC_FIELD USING 'MG03STEUER-TAXKM(01)'
RECORD-TAXKM. " ÎïÁÏË°·ÖÀà
condense RECORD-VRKME no-gaps.
IF RECORD-MEINS <> RECORD-VRKME and RECORD-VRKME <> ''.
perform bdc_field using 'MVKE-VRKME'
record-VRKME. " ÏúÊÛµ¥Î»
select single * from MARM where matnr = record-matnr
and meinh = record-vrkme.
if SY-SUBRC NE 0.
tmp = 'W'.
select single * from t006 where MSEHI = record-meins.
if t006-DIMID = 'AAAADL'.
DIMID = ''.
else.
DIMID = t006-DIMID.
endif.
select single * from t006 where MSEHI = record-vrkme.
if dimid <> t006-DIMID.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0510'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMZU-UMREN'
record-VMREN. "ÏúÊÛµ¥Î»×ª»»Òò×Ó
perform bdc_field using 'RMMZU-UMREZ'
record-VMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
endif.
endif.
ENDIF.
perform bdc_dynpro using 'SAPLMGMM' '4200'.
perform bdc_field using 'BDC_OKCODE' " µ÷ÓÃË°Àà×ÓÆÁÄ»
'/00'.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' " ·µ»ØÏúÊÛ×éÖ¯ 1ÆÁÄ»
'/00'.
ENDFORM. " salorg1
*& Form salorg2
ÏúÊÛ×éÖ¯ 2
--> p1 text
<-- p2 text
FORM salorg2.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'MVKE-KTGRM'.
PERFORM BDC_FIELD USING 'MVKE-VERSG'
RECORD-VERSG. " ÎïÁÏͳ¼Æ×é
PERFORM BDC_FIELD USING 'MVKE-KTGRM'
RECORD-KTGRM. " ¿ÆÄ¿ÉèÖÃ×é
PERFORM BDC_FIELD USING 'MVKE-KONDM'
RECORD-KONDM. " ÎïÁ϶¨¼Û×é
perform bdc_field using 'MVKE-MTPOS'
RECORD-MTPOS. " ÏîÄ¿Àà±ð×é
PERFORM BDC_FIELD USING 'MVKE-MVGR1'
RECORD-MVGR1. " ÎïÁÏ×é 1
PERFORM BDC_FIELD USING 'MVKE-MVGR2'
RECORD-MVGR2. " ÎïÁÏ×é 2
ENDFORM. " salorg2
*& Form salplant
ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý
--> p1 text
<-- p2 text
FORM salplant.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
select single * from marc where matnr = record-matnr
and werks = record-werks.
if SY-SUBRC NE 0 OR MARC-MTVFP = ''.
PERFORM BDC_FIELD USING 'MARC-MTVFP'
RECORD-MTVFP. " ¿ÉÓÃÐÔ¼ì²é
endif.
PERFORM BDC_FIELD USING 'MARA-TRAGR'
RECORD-TRAGR. " ÔËÊä×é
PERFORM BDC_FIELD USING 'MARC-LADGR'
RECORD-LADGR. " ×°ÔØ×é
perform bdc_field using 'MARC-XCHPF'
record-XCHPF. " ÅúÁ¿¹ÜÀí
ENDFORM. " salplant
*& Form PURCHASEDATA
²É¹ºÊý¾Ý
--> p1 text
<-- p2 text
form purchasedata.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARC-WEBAZ'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX.
IF K NE 'K'.
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
perform bdc_field using 'MARA-MATKL'
record-MATKL. " ÎïÁÏ×é
ENDIF.
condense RECORD-BSTME no-gaps.
IF RECORD-MEINS <> RECORD-BSTME and RECORD-BSTME <> ''.
perform bdc_field using 'MARA-BSTME'
record-BSTME. " ¶©µ¥µ¥Î»
select single * from MARM where matnr = record-matnr
and meinh = record-bstme.
if SY-SUBRC NE 0 and
( record-vrkme <> record-bstme or tmp <> 'W' ).
tmp = 'W'.
select single * from t006 where MSEHI = record-meins.
if t006-DIMID = 'AAAADL'.
DIMID = ''.
else.
DIMID = t006-DIMID.
endif.
select single * from t006 where MSEHI = record-bstme.
if dimid <> t006-DIMID.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0510'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMZU-UMREN'
record-UMREN. "¶©µ¥µ¥Î»×ª»»Òò×Ó
perform bdc_field using 'RMMZU-UMREZ'
record-UMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
endif.
endif.
ENDIF.
perform bdc_field using 'MARC-EKGRP'
record-EKGRP. " ²É¹º×é
perform bdc_field using 'MARC-WEBAZ'
record-WEBAZ. " ÊÕ»õ´¦Àíʱ¼ä
endform. " PURCHASEDATA
*& Form MRP1
text
--> p1 text
<-- p2 text
FORM MRP1.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX. " ÎïÁÏÃèÊö
IF K NE 'K'.
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾µ¥Î»
ENDIF.
perform bdc_field using 'MARC-DISGR'
record-DISGR. " MRP×é
perform bdc_field using 'MARC-MAABC'
record-MAABC. " ABC±êʶ
perform bdc_field using 'MARC-DISMM'
record-DISMM. " MRPÀàÐÍ
perform bdc_field using 'MARC-FXHOR'
record-FXHOR. " ¼Æ»®µÄʱ½ì
perform bdc_field using 'MARC-DISPO'
record-DISPO. " MRP¿ØÖÆÕß
perform bdc_field using 'MARC-DISLS'
record-DISLS. " ÅúÁ¿
perform bdc_field using 'MARC-BSTFE'
Here is a sample program which creates a material with the bare minmal fields, this will get you started.
report zrich_0003 .
data: headdata type bapimathead.
data: clientdata type bapi_mara.
data: clientdatax type bapi_marax.
data: descdata type table of BAPI_MAKT with header line.
data: return type bapiret2 .
data: returnm type table of bapi_matreturn2 with header line.
data: xmara type mara.
parameters: p_matnr type mara-matnr.
headdata-material = p_matnr.
headdata-ind_sector = 'M'.
headdata-matl_type = 'FERT'.
headdata-basic_view = 'X'.
clientdata-BASE_UOM = 'EA'.
clientdatax-BASE_UOM = 'X'.
clientdata-old_mat_no = 'Old Material'.
clientdatax-old_mat_no = 'X'.
clientdata-division = '00'.
clientdatax-division = 'X'.
descdata-LANGU = sy-langu.
descdata-MATL_DESC = 'This is the description'.
append descdata.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
headdata = headdata
clientdata = clientdata
clientdatax = clientdatax
* PLANTDATA =
* PLANTDATAX =
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA =
* VALUATIONDATAX =
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA =
* SALESDATAX =
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
importing
return = return
tables
MATERIALDESCRIPTION = descdata
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
returnmessages = returnm
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
check sy-subrc = 0.
Regards,
Rich Heilman -
Initialize some fields in material master with default values
Hi,
I would like to initialize some fields in material master MM01 with default values.
for exemple in the view MRP1 there is a field MRP type I would like to initialize PD in the field as default value.
but when I go to the technical information there is no parameter id that I can use in SU3.
Do you know how I can the initialize the field those don't have parameter ID?
thank
DedeDear Glenn,
This is possible in SAP for this use T code MMD1 and create MRP profile and assign this MRP profile while creating material using MM01 in the organisation level put this created MRP profile. The values you maintained in this profile get copied to the material by default.
To maintain MRP profile go to MMD1->give your profile name...........> click on selection screen push button--->give here profile description--->select what MRP field which u want to make fixed one/default. if make fixed later you can not change--
>click on data screen 1 push button and maintain your value and save
sree -
Create Material Master Data with BAPI
Hi,
I don't know using of BAPI. I want using BAPI_MATERIAL_SAVEDATA bapi for creating material master data for Basic Data1, Basic Data2, Purchasing and MRP views. Does anybody can help me ?
Thank you
Good nightHi,
Please refer to the documentation below:
BAPI_MATERIAL_SAVEDATA
Short Text
Create and Change Article Master Data
Functionality
You use this method to create new material master data or to change existing material master data. The data on a material can be transferred for each call.
When creating material master data, you must transfer the material number, the material type, and the industry sector to the method. You must also enter a material description and its language.
When changing material master data, you need enter only the material number.
In the header data, you must select at least one view for which data is to be created. Depending on the view selected, you must maintain other required parameters. If you do not enter values for all of the required parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first be supplied with data by the calling program. An indicator must also be set for each of these fields so that the data is written to the database by the method. This requires the calling program to supply the corresponding field with the indicator in a checkbox table (for example, CLIENTDATAX). Checkbox tables exist for tables that do not contain any language-dependent texts (MAKT, MLTX), International Article Numbers (MEAN), or tax classifications (MLAN). Several data records for a material can be created in these tables.
If a structure contains fields for units of measurement (such as structure CLIENTDATA, field BASE_UOM), language indicators (such as structure MATERIALDESCRIPTION, field LANGU), or country indicators (such as structure TAXCLASSIFICATIONS, field DEPCOUNTRY), there is always a field of the same name with the ending _ISO. This makes it possible to transfer either the internally used SAP code or a standardized ISO code for the units of measurement, language indicators, or country indicators. ISO codes are converted to an SAP code internally for further processing. The ISO code is used only if the SAP code is not transferred. If you use ISO codes, there must be a unique assignment of the ISO code to the SAP code in the following activities in Customizing for Global Parameters:
Check Units of Measurement
Define Countries
If you want to maintain long texts (basic data texts, internal comments, purchase order texts, material memos, or sales texts) or customer-defined fields for a material, some special conditions have to be observed. They are described in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
Parameters
HEADDATA
CLIENTDATA
CLIENTDATAX
PLANTDATA
PLANTDATAX
FORECASTPARAMETERS
FORECASTPARAMETERSX
PLANNINGDATA
PLANNINGDATAX
STORAGELOCATIONDATA
STORAGELOCATIONDATAX
VALUATIONDATA
VALUATIONDATAX
WAREHOUSENUMBERDATA
WAREHOUSENUMBERDATAX
SALESDATA
SALESDATAX
STORAGETYPEDATA
STORAGETYPEDATAX
FLAG_ONLINE
FLAG_CAD_CALL
NO_DEQUEUE
NO_ROLLBACK_WORK
RETURN
MATERIALDESCRIPTION
UNITSOFMEASURE
UNITSOFMEASUREX
INTERNATIONALARTNOS
MATERIALLONGTEXT
TAXCLASSIFICATIONS
RETURNMESSAGES
PRTDATA
PRTDATAX
EXTENSIONIN
EXTENSIONINX
Exceptions
Function Group
1001UEB
Thanks,
Sandeep. -
ALE:Material Master Data Distribution
Hi
I am new to ALE Material Master Data Distribution and if the questions are incorrectly worded, please accept my apologies. It is due to lack of knowledge.
I am doing Material Master Data distribution and I am using standard basic type MATMAS03. The standard TCode MM01, MM02 has SAP tables and 3 custom tables.
I have turned the active on using BD61 and change pointers to message type.
Q: Is the change pointer, applicable to entire material master? i.e. if I change a field in Z table or standard material tables, can an IDOC be created for the entire material record?
Q: What is the function of BD52? Does this override the option Activate Change pointers for message type? Does it mean, if the changes are made to those fields in BD52 a change pointer is created?
Q: If I change Z table only, will there be a change pointer created? If not, how could I accomplish this using BD52.
Q When do we use the enhancement MGV00001?
Also, If you could add anything in addition to above queries, it will be helpful to me and I appreciate it.
With regards,
WilliamThank you Sudhakar.
Your tips are good, but, I was not able to get the problem resolved.
Let me explain what I have done based on your tips.
1. MATMAS uses MATMAS03. The basic type has NOT been modified to have z fields yet.
2. Using BD52, i have created the following fields
MATERIAL ZEMM_MARA_TECH IM_ADVISORY_CODE
MATERIAL ZEMM_MARA_TECH KEY.
3. Modified the MMR for IM_ADVISORY_CODE.
I did not see a change pointer for this change.
Q: When I created above entry using BD52, was asking the table name. The table name is stored in TCD0B. What TCode is available the entries in TCDOB. For the time being, i created using SQL.
Q. Is there a follow up configuration required to capture the changes?
I will award the points in a couple of days time, even if I do not get the solution, because you have spent your precious time for the community. I will wait for a couple of days for other suggestions and close the Problem. -
New standard field in Material master
Hi
I have to introduce "RETDELC" field in Material Master.
The said field is already available in MARA table.
The field is available only in ECC 6.0 version.
I have introduced the field in Field selection group and make it optional at client level, material type level and Transaction code level (MM01,MM02, MM03).
But stil, i could not get the same field in Material Master- Basic Material data-2 view.
Any help please!
Regards
Prasadthis fields domain is DFPS_RETDELC .
DFPS stands for Defense Forces & Public Security.
In order to use this industry solution, you need to activate additional business functions
http://help.sap.com/erp2005_ehp_03/helpdata/EN/d8/686660a46d486e95f0a3588111376d/frameset.htm -
Authorization Material Master data
Hello,
vould you tell me if it's possible to restrict changing Material master data according to material type ?
Thank'sHi,
Use authorization object M_MATE_MAR - Material type authorization for material master records
This object determines whether a user is authorized to maintain the material master record for a specific material type.
Defined fields
Fields Possible values Meaning
ACTVT 01 User may create data.
02 User may change data.
03 User may display data.
06 User may flag data for deletion.
BEGRU Here you must specify the
authorization groups from table
T134 for which the materials
concerned may be processed.
Maybe you are looking for
-
HT204264 How can I upload older photos without metadata into Photos?
I have older photos that I would like to upload to my Photo's iCloud library but it will pop up with a message saying there is no metadata. How can I upload my older photos?
-
Hi: I've just move from my MacBook using 10.4.11 to my new MacBookPro 10.5.2 I've used always the localhost or 127.0.0.1 for the SMTP. However it did not work on the 10.5.2. Does anybody knows if this is a system version limitation or if there is som
-
How can i tell what email imessages is sending from
how can i tell what email imessages is sending from??? I have 3 different email that i can receive on Imessage but how can i tell wich one it was sent to?? and wich one i will be replying from ???
-
OSD: Downloading multiple files is very slow
I has a exe software. It is not a single file package, it contains a lot of files. when I installed this software in OSD, I found it would spend 15~20minutes to download files. It was very strange. The software is only 750 mb size. the speed of downl
-
Nach Installation Fehlermeldung..für Schlüssel\Software\MozillaPlugins\.. keine Berechtigung
Hallo, ich bin neu im Forum und hoffe, eine Hilfe zu bekommen. Auf meinem Rechner (Windows XP) lief der Adobe Reader nicht mehr einwandfrei. Deshalb habe ich die Update-Funktion aktiviert. Dabei kam eine Fehlermeldung. Den Inhalt habe ich leider verg