MRP view mandatory

Hello SAP Guru,
My requirement is for ROH material i want to make MRP view as a mandatory system should restrict to save the material master record if MRP view is missing for ROH material. plesae suggest how can we do that?
regards,

Dear ,
1.One way will be select the MRP views frist time and defalut by hitting the Default Tab and SAVE in MM01 entry .
2.Check in OMT4 /OPJBor Below SPRO path SPRO --> Logistics - General --> Material Master --> Basic Settings --> Define Attributes of System Messages-Keep E/W so that it will flag mesage .
3.Controlling through MMD1-MRP profile for MRP1-4 view data .
4.You may use EXIT_SAPLMGMU_001 of enhancement MGA00001 which is triggered put a breakpoint in this function, if MRP1-MRP4 view are not selected  .
Try and check
Regards
JH

Similar Messages

  • Mrp views upload

    Hi All,
    What are the mandatory minimum, views to be maintained in material master, to create MRP views?
    Eg- Suppose we create only basic view and tha ncan we create MRP view without Accounting, Purchasing etc...
    Regards,
    Satyendra

    hio
    u can create material with basic 1 and 2 date but it is of no use
    u have to create accounting view if ur material is valuated
    u have to maintain following views generally
    Basic Data 1
    Basic Data 2
    Classification
    Sales: Sales Org. Data 1
    Sales: Sales Org. Data 2
    Sales: General/Plant Data
    Foreign Trade: Export Data
    Sales Text
    Purchasing
    MRP 1
    MRP 2
    MRP 3
    MRP 4
    General Plant Data / Storage 1
    General Plant Data / Storage 2
    Accounting 1
    for the raw material u can omiit sales view
    for finish use all above views
    regards
    kunal

  • MRP view in material master creation

    Hi Guys,
    Can anyone tell me how to change the settings for field dependency. My requirement is to use only the filed for "reorder point" in MRP view and do not enter any other data like MRP type or lot sizing etc.
    I have tried changing the setting for field selection group for MRP type etc but whenever i enter the value in Reorder point field it asks me for MRP type and does not allow me proceed...
    Thank you for your help.
    Regards,
    Siddharth

    Hi
    You cannot change that dependency as it is done through program code and not thru config.
    If you want reorder point only as an info field and not for actual Reorder point planning, I suggest you to explore any other unused information field in the masterial master.
    You can also use classification
    Best regards
    Ramki

  • Material Master MRP View not be created till Basiv View is created

    Hello All,
    I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
    Thanks for your inputs.
    Ismail

    Dear Syed ,
    If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
    Hope this can help you.
    Please let me know if my thinking about your question is correct.
    best regards,
    Carlos Moçatto

  • Special Procurement MRP View VS. Costing View

    Hi Experts,
    What's the difference between the 2 Special Procurement Key in the MRP veiw and the Costing View?  Should they always be the same?
    Thanks,
    Kumar

    Hi,
    MRP:
    You use special procurement when you want to be able to override the procurement type in the material master or define the procurement type more precisely.
    If the procurement type is in-house, you can nevertheless force the system to ignore the BOM and routing, and process the material as if it were externally procured, by specifying the special procurement as external.
    Costing:
    If you enter a special procurement type in the Costing view of the material master record, it will be used in costing.
    If you do not enter a special procurement type in the costing view of the material master record, the system will use the special procurement type in the MRP view.
    For further Clarification revert.
    Regards,
    S.Babu

  • MRP views in MM02

    I need to create a Screen Variant  and apply to a Z transaction which only allows users access to change MRP Information u2013 MRP1, MRP2, MRP3 and MRP4 tabs. in the Material Master.
    I do not want to give everyone access to MM02 u2013 Change Material Master as this allows them to change all master data within the Material.
    I only want them to be able to change MRP1, MRP2, MRP3 and MRP4 tabs.
    How to make the screen variant for this. I haven't worked on screen variants..Just need details on that. Please help.
    Edited by: yorker on Jun 27, 2011 9:08 AM

    Hi,
    No need of creating any Trasnaction/Screen Variant
    Go to OMT3B - Copy New Screen Seq from 21 and under "Data screens" delete all except MRP.
    Now Go to OMT3E - Here under "User screen reference", assign a Key to all user whom you want to give change option for MRP views. Now In Screen Seq Control Screen, maintain an entry with SRef; Trans as MM02, SRef: User as that Key, SRef: mat Type as *, SRef: Industry as * and assign the new Screen Seq.
    Now Check in MM02.

  • MRP view maintenance

    Hi All,
    I have developed a programme to uplaod MRP views for huge number of materials across Plants.
    There are few material for which one strange thing is observed
    1. Material A plant 1-MSTA -D not mantained, but the same is there in MM01
    2..MaterialA plant 2-MSTA-D maintained and its maintained in MM01.
    Is MRP maintained on the basis of Plant or Storage location or both...because my programme is looking at material plant combination level and uploading the MRP as per maintenance status maintained in table MSTA.
    But in above case, it gave an error probably  because for one storage location MRP was maintained  and for other not...
    Can you all throw some light on this....
    Regards,
    Satyendra

    One thing i missed...there are few plants for which above things are appearing for all the materials...
    i.e MRP view maintained in MM03 but for the same materials MSTA doesnt have D status for those plants..
    Regards,
    Shailesh

  • MRP view maintenance for Material Master

    What is the basic entry for R3 material master, if, I want EBP below condition works:
    Stock in R/3 sufficient: Shopping Carts creates MatReservation.
    Stock in R/3 not sufficient: Shopping Cart still creates MatReservation, and when run MRP (in R/3), it gives Purchase Requisition, with the exact shortage qty.
    Info: We have set customizing in EBP so that every follow-on document for Shopping Cart will be Reservation.
    -Mimi-

    In R/3  , the material should have MRP view and all planning related settings ...
    wr u want to go for consumption based planning or deterministic planning .
    Based on the planning procedure setting in MRP views of the R/3 sytem , PRs will get generated.
    This is what u are looking for .. otherwise post your feedback...
    Regards
    Mani

  • New lot size in MRP view

    Hi ALL
    Any one can suggest how can we configure a new lot size for  MRP view in ECC.
    regards
    Vikas

    Hello Vikas,
    I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
    Thanks
    Amber

  • How to delete MRP view data after create in Material master data ?

    Hi all ,
          After user  create a useless MRP view data in Material master data , how to remove it ?

    Hi
    Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
    Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
    Give the necessary data that is needed for the view you want to delete.
    Press and flag the view you want to delete.
    Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
    regards
    Anand

  • How to create MRP view using BO BUS1001006 & Method CreateViews.

    Guys,
    I need to create MRP view using BO BUS1001006 & Method CreateViews.
    i am not able to unterstand, what i need to specify to create MRP view, other than material number.
    what field i need to send for MRP view.
    Regards.
    santosh.
    Edited by: santosh koraddi on Jun 23, 2010 6:14 PM

    Hi,
    I have a similar question, have done a search and I see this sort of thing has come up a few times but with no definitive answer.... this thread seems close but don't really understand the solution (I'm not an ABAPER)
    I have a material master creation workflow under construction, it uses BUS1001006 and method createviews.
    The issues is that I want to restrict creation of certain views to certain agents, I have a fork in my workflow and its meant to split up the various views for various agents.
    The problem is that if an agent in one of the forks completes their views the workflow tries to get them to completes teh other views which they do not have authoisation to do... anyway the end result is that the workflow thinks all teh views have been created and the workflow items dissappear from the others inboxes.
    How do I setup my workflow such that each agent in each fork only has to complete the views they have authorisation to maintain and leaves work items in the inboxes of other agents for them to complete?

  • MRP view in MM60 list

    Dear pandits,
    I am doing material plant extn. thro lsmw from plant x to plant y.
    Could I fetch following MRP views aprat from  MRP type (appearing already .)
    reorder point,  MINBE
    mrp controller, DISPO
    lot size , DISLS
    maximum stock level MABST
    thanks
    v balajee

    Hi ,
    I think u will not all these fields in MM60 report.
    All these fields u will get in MARC TABLE,go to se16.give MARC table.In the initial screen,go to settings list format- chosse fields-select all the fileds which u want and enter.
    Then in the initial screen,give plant X and execute.
    U can download all these details to excel sheet and can be used for lsmw.

  • Seasons in MRP view

    Hi,
    My customer wants to view MRP in seasons wise. Is that possible in MRP screen?
    Please let me know if any method available in MRP..
    Thanks,
    Rohith

    Hello Vikas,
    I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
    Thanks
    Amber

  • Materail Master - MRP view 4

    Dear experts,
    pls explain MRP view 4 - Follow-up matl field?
    what use? how to use?
    Regards,
    Sankaran

    Hi,
         A particular material X to be discontinued. Instead of that you want to use some other material Y. For that reason this field will use.
        In MRP 4 view of material X , make discontinued indicator tick. Give effective date.
    Give the follow up material no.Y.
    Result: From effective date, material X will be replaced by material Y.
    Reward if useful.
    Regards,
    Dharma

  • Finding if mrp view exists

    hi
    i am working on an enhancement within cif to transfer material master in ecc to scm .
    i need to check if mrp view exists or no for every material transferred.
    now how do i do this coding wise ?  which field or table do i need to check if mrp view has been defined or no.

    Hi,
    Use FM 'SELECTION_VIEWS_FIND'
    Check below thread
    Select a specific view in MM02/MM01
    https://forums.sdn.sap.com/click.jspa?searchID=6788689&messageID=4407517
    Regards,
    Atish
    Message was edited by:
            Atish Sarda

Maybe you are looking for