MRP Vs Aspen Tech MIMI

Hi Team,
My client is using Aspen Tech MIMI for their business. I don't know about the planning software. Anyone has any idea about this third party planning software and comparison of it with the MRP?
Thanks for your help.
Krishna

Similar Messages

  • ~Can't open "noname" MIME files in Gmail~

    I've searched for this topic, but can't understand all the tech-speak! I'm in my 20s, so I'm not dumb, just not in the loop. Someone break this down for me in layman's terms.
    I use Gmail for my primary email. Lately, I've been getting attachments from family members who use PCs. These attachments are always called "noname." When I hit "download," I get a message saying that it is a MIME message and asking what application I should open it with. I always get a bunch of nonsense no matter what I open it with! It looks like it's trying to be HTML, but opening it with Firefox doesn't work. Neither does opening it with the StuffIt Expander.
    Even when I hit "View as text," it doesn't make any sense. I'll paste a copy below. Can someone please tell me what application to open up MIME files in?
    This is only part of the message because it was too long to post. Here we go.... close your eyes!!
    From: "Bumidang, Gloria" <**@*******.*>
    To: "Sanchez, Thess" <*******@******>,
    "'Saqui, Olivia'" <*******@******>,
    Subject: FW: 90-10 PRINCIPLE
    Date: Mon, 23 Mar 2009 12:05:21 -0400
    Message-ID: <[email protected]>
    MIME-Version: 1.0
    Content-Type: multipart/mixed;
    boundary="----=NextPart_000_005F01C9AC67.828B5C70"
    X-Mailer: Microsoft Office Outlook 12.0
    Thread-Index: AcmrZINq6Njpl4LQQYGF4PcxHt+WQQASvuNQAAK8fpA=
    Content-Language: en-us
    X-Originating-IP: [198.96.114.20]
    X-OriginalArrivalTime: 23 Mar 2009 16:05:23.0052 (UTC) FILETIME=[2BF152C0:01C9ABD1]
    X-Apparently-To: ****@****.com via 216.39.53.229; Mon, 23 Mar 2009 09:05:53 -0700
    X-IronPort-AV: E=Sophos;i="4.38,408,1233550800"; d="pps'32?scan'32,208,217,32";a="7117813"
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator:
    X-Antivirus: AVG for E-mail 7.5.557 [270.11.24/2018]
    This is a multipart message in MIME format.
    ------=NextPart_001_006001C9AC67.828B5C70--
    ------=NextPart_001_006001C9AC67.828B5C70
    Content-Type: text/html;
    boundary="004_95B51F5CDB1B9B46A9E963EF35579D6025AFB8F116EXMB01regionp";
    charset="us-ascii"
    Content-Transfer-Encoding: quoted-printable
    <html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
    xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
    xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
    xmlns=3D"http://www.w3.org/TR/REC-html40">
    <head>
    <meta http-equiv=3DContent-Type content=3D"text/html; =
    charset=3Dus-ascii">
    <meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)">
    <!--[if !mso]>
    <style>
    v\:* {behavior:url(#default#VML);}
    o\:* {behavior:url(#default#VML);}
    w\:* {behavior:url(#default#VML);}
    .shape {behavior:url(#default#VML);}
    </style>
    <![endif]-->
    <title>Message</title>
    <style>
    <!--
    /* Font Definitions */
    @font-face
    {font-family:Tahoma;
    panose-1:2 11 6 4 3 5 4 4 2 4;}
    @font-face
    {font-family:inherit;
    panose-1:0 0 0 0 0 0 0 0 0 0;}
    /* Style Definitions */
    p.MsoNormal, li.MsoNormal, div.MsoNormal
    {margin:0cm;
    margin-bottom:.0001pt;
    font-size:12.0pt;
    font-family:"Times New Roman";}
    a:link, span.MsoHyperlink
    {color:blue;
    text-decoration:underline;}
    a:visited, span.MsoHyperlinkFollowed
    {color:blue;
    text-decoration:underline;}
    pre
    {margin:0cm;
    margin-bottom:.0001pt;
    font-size:10.0pt;
    font-family:"Courier New";}
    span.EmailStyle18
    {mso-style-type:personal-reply;
    font-family:Arial;
    color:navy;}
    @page Section1
    {size:612.0pt 792.0pt;
    margin:85.6pt 80.5pt 58.4pt 89.85pt;}
    div.Section1
    {page:Section1;}
    -->
    </style>
    </head>
    <body lang=3DEN-CA link=3Dblue vlink=3Dblue>
    <span =
    style=3D'font-size:
    10.0pt;font-family:Arial;color:navy'>Good morning, have a great day and =
    a super
    week.  Stay safe and sound always.
    <span =
    style=3D'font-size:
    10.0pt;font-family:Arial;color:navy'> 
    <font =
    size=3D3
    face=3D"Times New Roman">
    <hr size=3D2 width=3D"100%" align=3Dcenter tabindex=3D-1>
    From:</spa=
    n><span lang=3DEN-US =
    style=3D'font-size:10.0pt;font-family:Tahoma'>
    Yu, Lilibeth [mailto:[email protected]]
    Sent: March 23, 2009 8:06 =
    AM
    Subject: FW: 90-10 =
    PRINCIPLE
    ------=NextPart_000_005F01C9AC67.828B5C70
    Content-Type: application/vnd.ms-powerpoint;
    name="90-10 Principle.pps"
    Content-Transfer-Encoding: base64
    Content-Disposition: attachment;
    filename="90-10 Principle.pps"
    0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAAVAAAAdQoAAAAAAAAA
    EAAAdwoAAAEAAAD+////AAAAAF4KAABfCgAAYAoAAGEKAABiCgAAYwoAAGQKAABlCgAAZgoAAGcK
    AABoCgAAaQoAAGoKAABrCgAAbAoAAG0KAABuCgAAbwoAAHAKAABxCgAAdgoAAP//////////////
    //////////////////////////////////////////////////////////////////////////+g
    Rh3wZWAAANx5LbqFi2eVecK4MZKK5p3//9j/4AAQSkZJRgABAgEAYABgAAD/wAARCAMABAADASIA
    AhEBAxEB/9sAhAAFAwMEAwMFBAQEBQUFBgcNCAcHBwcQCwwJDRMQFBMSEBISFRceGRUWHBYSEhoj
    GhwfICEiIRQZJSckICceISEgAQUFBQcGBw8ICA8gFRIVFSAgICAgICAgICAgICAgICAgICAgICAg
    ICAgICAgICAgICAgICAgICAgICAgICAgICD/xAGiAAABBQEBAQEBAQAAAAAAAAAAAQIDBAUGBwgJ
    CgsQAAIBAwMCBAMFBQQEAAABfQECAwAEEQUSITFBBhNRYQcicRQygZGhCCNCscEVUtHwJDNicoIJ
    ChYXGBkaJSYnKCkqNDU2Nzg5OkNERUZHSElKU1RVVldYWVpjZGVmZ2hpanN0dXZ3eHl6g4SFhoeI
    iYqSk5SVlpeYmZqio6Slpqeoqaqys7S1tre4ubrCw8TFxsfIycrS09TV1tfY2drh4uPk5ebn6Onq
    8fLz9PX29/j5+gEAAwEBAQEBAQEBAQAAAAAAAAECAwQFBgcICQoLEQACAQIEBAMEBwUEBAABAncA
    AQIDEQQFITEGEkFRB2FxEyIygQgUQpGhscEJIzNS8BVictEKFiQ04SXxFxgZGiYnKCkqNTY3ODk6
    Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqCg4SFhoeIiYqSk5SVlpeYmZqio6Slpqeo
    qaqys7S1tre4ubrCw8TFxsfIycrS09TV1tfY2dri4Tl5ufo6ery8/T19vf4fr/2gAMAwEAAhED
    EQA/APH6KKK5TmwooooAKKKKACiiigAooooAXI7Lijj6UuCx4FdR4RGHiLxpYzXml2cTQQts3y
    yBA7Y6Lnr29qErmGIxNLDU3UrSUYrq9EcrmlHPFT3dnPp13NZ3cLQzwuY5I2HKsDgiq49qRpTnGc
    VKLumFFFFMsKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAK
    KKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAoo
    ooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiii
    gAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKA
    CiiigAooooAKKKKACiiigAooooAKKKKAFzwBjpXp3wyNcPgXQZNIvtMlukSRpIHicKeeSrZ9/v
    0rzEDceKAcLxQnbY4cwy/D5hQdDEK8X+hpeJtbm8S67eatPGsUt3KZCi9FHYfgMVm53NzSkE5Y0Y
    zjHekdNGjChTjSpq0YpJLyWiG0UUUzUKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAoo
    ooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiii
    gAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKA
    CiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAK
    KKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAF7AYq5YaTf6izmysrm4EQzJ5
    MTSbB6nA4qpkBQAa9pCvxK8LeFfCsunarcixuY5mlZjEzCYHGDlQeRjGPYURV2eXmMr4LCutQp
    upJW0X/A1+48WIXPHSk6gn0rY8ZarZ634n1LUrC3MNrc3DSRpjBwT1I7E9fxrIYbeBSO3DVJVaMa
    k48rcU2uza2+Q2iiimbhRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUU
    UAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQ
    AUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFAB
    RRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFF
    Message was edited by: TravelGirlTwoPointOh
    <Edited by Moderator>

    TravelGirlTwoPointOh wrote:
    I've searched for this topic, but can't understand all the tech-speak! I'm in my 20s, so I'm not dumb, just not in the loop. Someone break this down for me in layman's terms.
    It sounds like gmail has serious problems with MIME data. That isn't something it should have trouble with. It has been solved for a long, long time now.
    Even when I hit "View as text," it doesn't make any sense. I'll paste a copy below. Can someone please tell me what application to open up MIME files in?
    Ordinarily, your e-mail program.
    I have a program I used to sell years ago when people started sending MIME e-mail messages that AOL couldn't understand. Perhaps I should update it if all the world is switching to gmail and gmail doesn't handle MIME either. 1996 is here again.
    Anyway, click here to download it.
    Technically this is a shareware program and technically I could make money from it. But very few people need this program anymore and it should work just fine for you in "demo" mode.

  • Problem about Calling SQLplus Web Service on Aspen Watch Server

    Hi all,
    We're using MII 11.5 and trying to call a web service from a Aspen Watch server through the web service block in transaction. The web service enclosed a function call ExecuteSQL which will accept a sql query function and return a set of Data. Now, using the same web service on two different servers, we got a success(server A) and a failure(Server B). On the failed call, right in the first page of enter a URL, it will return a "SOAP Service could not be loaded: The element type 'META' must be terminated by the machine end-tag '</META>'" error.
    According to the admin of the web server, the web service on both servers can be called correctly when he created two simple ASP pages. After serious testing, he thought that the only reason should be MII may not be compatible with .Net 2.0 binding web service. The following is some comparison we made to the two servers.
                                                                                    Server A / Server B / Error, if applicable
    .Net Framework installed on MII server:                                 1.1, 2.0 /      1.1, 2.0     
    .Net Binding:                                                                          1.1 /               2.0
    IIS version on MII server:                                                 6 /                 6     
    From MII server broser to Server A web service:                 Yes /      Yes     
    From MII server browser to Server B web service:                 No /     No /      Return on web "The test form is only available for requests from the local machine"
    From localhost browser to Server A web service:                 n/a //     Yes     
    From localhost browser to Server B web service:                 Yes //     n/a     
    From PC browser to Server B web service:                                No /        Yes /     Return on web "The test form is only available for requests from the local machine"
    Credentials required to run web service:                                 No /     Yes /     
    The following are the SOAP generated:
    Server A
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.aspentech.com/SQLplus.WebService/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://www.aspentech.com/SQLplus.WebService/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://www.aspentech.com/SQLplus.WebService/">
    - <s:element name="ExecuteSQL">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="command" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="ExecuteSQLResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="ExecuteSQLResult" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
      <s:element name="string" nillable="true" type="s:string" />
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="ExecuteSQLSoapIn">
      <wsdl:part name="parameters" element="tns:ExecuteSQL" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLSoapOut">
      <wsdl:part name="parameters" element="tns:ExecuteSQLResponse" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpGetIn">
      <wsdl:part name="command" type="s:string" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpGetOut">
      <wsdl:part name="Body" element="tns:string" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpPostIn">
      <wsdl:part name="command" type="s:string" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpPostOut">
      <wsdl:part name="Body" element="tns:string" />
      </wsdl:message>
    - <wsdl:portType name="SQLplusWebServiceSoap">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLSoapIn" />
      <wsdl:output message="tns:ExecuteSQLSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:portType name="SQLplusWebServiceHttpGet">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLHttpGetIn" />
      <wsdl:output message="tns:ExecuteSQLHttpGetOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:portType name="SQLplusWebServiceHttpPost">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLHttpPostIn" />
      <wsdl:output message="tns:ExecuteSQLHttpPostOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="SQLplusWebServiceSoap" type="tns:SQLplusWebServiceSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceSoap12" type="tns:SQLplusWebServiceSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap12:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceHttpGet" type="tns:SQLplusWebServiceHttpGet">
      <http:binding verb="GET" />
    - <wsdl:operation name="ExecuteSQL">
      <http:operation location="/ExecuteSQL" />
    - <wsdl:input>
      <http:urlEncoded />
      </wsdl:input>
    - <wsdl:output>
      <mime:mimeXml part="Body" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceHttpPost" type="tns:SQLplusWebServiceHttpPost">
      <http:binding verb="POST" />
    - <wsdl:operation name="ExecuteSQL">
      <http:operation location="/ExecuteSQL" />
    - <wsdl:input>
      <mime:content type="application/x-www-form-urlencoded" />
      </wsdl:input>
    - <wsdl:output>
      <mime:mimeXml part="Body" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="SQLplusWebService">
    - <wsdl:port name="SQLplusWebServiceSoap" binding="tns:SQLplusWebServiceSoap">
      <soap:address location="http://clkaspenwatch:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceSoap12" binding="tns:SQLplusWebServiceSoap12">
      <soap12:address location="http://clkaspenwatch:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceHttpGet" binding="tns:SQLplusWebServiceHttpGet">
      <http:address location="http://servera:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceHttpPost" binding="tns:SQLplusWebServiceHttpPost">
      <http:address location="http://servera:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Server B
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.aspentech.com/SQLplus.WebService/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://www.aspentech.com/SQLplus.WebService/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://www.aspentech.com/SQLplus.WebService/">
    - <s:element name="ExecuteSQL">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="command" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="ExecuteSQLResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="ExecuteSQLResult" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="ExecuteSQLSoapIn">
      <wsdl:part name="parameters" element="tns:ExecuteSQL" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLSoapOut">
      <wsdl:part name="parameters" element="tns:ExecuteSQLResponse" />
      </wsdl:message>
    - <wsdl:portType name="SQLplusWebServiceSoap">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLSoapIn" />
      <wsdl:output message="tns:ExecuteSQLSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="SQLplusWebServiceSoap" type="tns:SQLplusWebServiceSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceSoap12" type="tns:SQLplusWebServiceSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap12:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="SQLplusWebService">
    - <wsdl:port name="SQLplusWebServiceSoap" binding="tns:SQLplusWebServiceSoap">
      <soap:address location="http://serverb:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceSoap12" binding="tns:SQLplusWebServiceSoap12">
      <soap12:address location="http://serverb:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Please advise me on how to fix the probelm. And please let me know any additional information is needed. Greatly appreciated~
    Best regards,
    Lawrence
    Edited by: UMeng Lai on Feb 6, 2009 4:07 PM

    Hi all,
    We're using MII 11.5 and trying to call a web service from a Aspen Watch server through the web service block in transaction. The web service enclosed a function call ExecuteSQL which will accept a sql query function and return a set of Data. Now, using the same web service on two different servers, we got a success(server A) and a failure(Server B). On the failed call, right in the first page of enter a URL, it will return a "SOAP Service could not be loaded: The element type 'META' must be terminated by the machine end-tag '</META>'" error.
    According to the admin of the web server, the web service on both servers can be called correctly when he created two simple ASP pages. After serious testing, he thought that the only reason should be MII may not be compatible with .Net 2.0 binding web service. The following is some comparison we made to the two servers.
                                                                                    Server A / Server B / Error, if applicable
    .Net Framework installed on MII server:                                 1.1, 2.0 /      1.1, 2.0     
    .Net Binding:                                                                          1.1 /               2.0
    IIS version on MII server:                                                 6 /                 6     
    From MII server broser to Server A web service:                 Yes /      Yes     
    From MII server browser to Server B web service:                 No /     No /      Return on web "The test form is only available for requests from the local machine"
    From localhost browser to Server A web service:                 n/a //     Yes     
    From localhost browser to Server B web service:                 Yes //     n/a     
    From PC browser to Server B web service:                                No /        Yes /     Return on web "The test form is only available for requests from the local machine"
    Credentials required to run web service:                                 No /     Yes /     
    The following are the SOAP generated:
    Server A
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.aspentech.com/SQLplus.WebService/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://www.aspentech.com/SQLplus.WebService/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://www.aspentech.com/SQLplus.WebService/">
    - <s:element name="ExecuteSQL">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="command" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="ExecuteSQLResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="ExecuteSQLResult" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
      <s:element name="string" nillable="true" type="s:string" />
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="ExecuteSQLSoapIn">
      <wsdl:part name="parameters" element="tns:ExecuteSQL" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLSoapOut">
      <wsdl:part name="parameters" element="tns:ExecuteSQLResponse" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpGetIn">
      <wsdl:part name="command" type="s:string" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpGetOut">
      <wsdl:part name="Body" element="tns:string" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpPostIn">
      <wsdl:part name="command" type="s:string" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLHttpPostOut">
      <wsdl:part name="Body" element="tns:string" />
      </wsdl:message>
    - <wsdl:portType name="SQLplusWebServiceSoap">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLSoapIn" />
      <wsdl:output message="tns:ExecuteSQLSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:portType name="SQLplusWebServiceHttpGet">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLHttpGetIn" />
      <wsdl:output message="tns:ExecuteSQLHttpGetOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:portType name="SQLplusWebServiceHttpPost">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLHttpPostIn" />
      <wsdl:output message="tns:ExecuteSQLHttpPostOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="SQLplusWebServiceSoap" type="tns:SQLplusWebServiceSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceSoap12" type="tns:SQLplusWebServiceSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap12:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceHttpGet" type="tns:SQLplusWebServiceHttpGet">
      <http:binding verb="GET" />
    - <wsdl:operation name="ExecuteSQL">
      <http:operation location="/ExecuteSQL" />
    - <wsdl:input>
      <http:urlEncoded />
      </wsdl:input>
    - <wsdl:output>
      <mime:mimeXml part="Body" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceHttpPost" type="tns:SQLplusWebServiceHttpPost">
      <http:binding verb="POST" />
    - <wsdl:operation name="ExecuteSQL">
      <http:operation location="/ExecuteSQL" />
    - <wsdl:input>
      <mime:content type="application/x-www-form-urlencoded" />
      </wsdl:input>
    - <wsdl:output>
      <mime:mimeXml part="Body" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="SQLplusWebService">
    - <wsdl:port name="SQLplusWebServiceSoap" binding="tns:SQLplusWebServiceSoap">
      <soap:address location="http://clkaspenwatch:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceSoap12" binding="tns:SQLplusWebServiceSoap12">
      <soap12:address location="http://clkaspenwatch:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceHttpGet" binding="tns:SQLplusWebServiceHttpGet">
      <http:address location="http://servera:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceHttpPost" binding="tns:SQLplusWebServiceHttpPost">
      <http:address location="http://servera:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Server B
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.aspentech.com/SQLplus.WebService/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://www.aspentech.com/SQLplus.WebService/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://www.aspentech.com/SQLplus.WebService/">
    - <s:element name="ExecuteSQL">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="command" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="ExecuteSQLResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="ExecuteSQLResult" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="ExecuteSQLSoapIn">
      <wsdl:part name="parameters" element="tns:ExecuteSQL" />
      </wsdl:message>
    - <wsdl:message name="ExecuteSQLSoapOut">
      <wsdl:part name="parameters" element="tns:ExecuteSQLResponse" />
      </wsdl:message>
    - <wsdl:portType name="SQLplusWebServiceSoap">
    - <wsdl:operation name="ExecuteSQL">
      <wsdl:input message="tns:ExecuteSQLSoapIn" />
      <wsdl:output message="tns:ExecuteSQLSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="SQLplusWebServiceSoap" type="tns:SQLplusWebServiceSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="SQLplusWebServiceSoap12" type="tns:SQLplusWebServiceSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ExecuteSQL">
      <soap12:operation soapAction="http://www.aspentech.com/SQLplus.WebService/ExecuteSQL" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="SQLplusWebService">
    - <wsdl:port name="SQLplusWebServiceSoap" binding="tns:SQLplusWebServiceSoap">
      <soap:address location="http://serverb:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
    - <wsdl:port name="SQLplusWebServiceSoap12" binding="tns:SQLplusWebServiceSoap12">
      <soap12:address location="http://serverb:13080/sqlpluswebservice/sqlpluswebservice.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Please advise me on how to fix the probelm. And please let me know any additional information is needed. Greatly appreciated~
    Best regards,
    Lawrence
    Edited by: UMeng Lai on Feb 6, 2009 4:07 PM

  • Access MIME from ABAP Mapping for Attachment

    Hi,
    I am adding an attachment in ABAP Mapping and sending that message to Ariba System through HTTP Adapter channel.
    I am able to send the message successfully and also I can see the attachment in the PI RWB But I am not able to see any
    attachment in the Receiver's end along with the message.Ariba is able to receive the message successfully though.
    It looks like I need to change MIME Header a bit before sending the message.
    I check this link.
    XI Attachment and main document MIME sequence
    But Its about SOAP Adapter with PayloadSwap Bean. Since HTTP adapter is on ABAP we can not use the Module
    Tab of the channel.
    I need to know how can I use ABAP Mapping to access the MIME HEADER to change/ check Content Disposition and
    other properties.
    Thanks,
    Vijay
    Edited by: tech.info012 on Oct 12, 2010 6:33 PM

    When I tried the 2nd option It is giving me this error in response message. Do you have any idea what problem can cause this.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not queue receive
    for message 4cb474bf-00c1-02af-e100-80000aa00d4b(INBOUND). Reason: java.lang.NullPointerException:
    </SAP:AdditionalText>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks,
    Vijay

  • Mime attachments in Mail from two mac users

    I've been receiving mime attachments in Tiger Mail from Ebay and members for a while and I've searched the forum for answers but haven't found a viable solution yet. I end up using TextEdit to open them. I've contacted ebay about this and they have no clue, and think it's spam even though I tell them I get them from Ebay tech support, however they do show up ok in my RCN webmail when I check there.
    Anyway that's not the problem now, I was trying to troubleshoot my father's mail problem who is Panther Mail and it mysteriously stopped working for him a couple days ago both sending and receiving. However he is getting them from his webmail at SBC/Yahoo formerly Ameritech. I checked his account settings over the phone and they seemed correct to what he had before but I had him contact his provider.
    They don't seem to know what's going on and wanted him to contact Apple.I had him contact them again and they finally did have him change his outgoing mail server from Ameritech to SBC/Yahoo. So he is able to send from there now but not receive emails. ( he still still sends and receives ok at his webmail site) . Since they changed the outgoing mail server however, the email he sends me (all plain text) is coming now as a mime attachment.
    I've never seen this before from two Mac users using Mail and plain messages. I had him try changing back to the Ameritech outgoing sever but that still doesn't work. And again if I check my RCN webmail I can view these messages fine in the body of the email there, just not in Mail. Any ideas what may have caused this? Is it because of the Yahoo outgoing mail server? He's about givin up and has resorted to his webmail only for now. I generally like Mail but this is a pia.
    Craig
    G5 Dual 2.5GHZ, 15 TiBook 1GHZ, I.25 dual G4 MDD, 15G ipod, Beige G3/500GHZ   Mac OS X (10.4.7)  

    <Where is it designated as a "mime-attachment" & where does the "27bytes" text appear?>
    It shows mime-attachment(27bytes) just below the little plain document icon. This shows up both in the body of the email and also the little attachment drop down menu below the To / subject area.
    <Also, if you go to Mail's View > Message submenu when one of these messages is open, which (if any) 'alternate' menu choices are available (not grayed out)? >
    All are greyed out except Long headers and Raw source.
    Here is the header info in the message if that helps any:
    From: [email protected]
    Subject: test
    Date: December 27, 2006 10:49:27 PM EST
    To: [email protected]
    Return-Path: <[email protected]>
    Received: from mr05.lnh.mail.rcn.net (EHLO mr05.lnh.mail.rcn.net) ([207.172.157.25]) by ms05.lnh.mail.rcn.net (MOS 3.7.5a-GA FastPath queued) with ESMTP id CYF54813; Wed, 27 Dec 2006 22:49:31 -0500 (EST)
    Received: from mx06.lnh.mail.rcn.net (mx06.lnh.mail.rcn.net [207.172.157.56]) by mr05.lnh.mail.rcn.net (MOS 3.7.5a-GA) with ESMTP id MDY18691; Wed, 27 Dec 2006 22:49:30 -0500 (EST)
    Received: from flpvm09.prodigy.net ([207.115.20.39]) by mx06.lnh.mail.rcn.net with ESMTP; 27 Dec 2006 22:49:29 -0500
    Received: from [75.34.9.255] (adsl-75-34-9-255.dsl.chcgil.sbcglobal.net [75.34.9.255]) by flpvm09.prodigy.net (8.13.8 out.dk.spool/8.13.8) with ESMTP id kBS3nEOh005937 for <[email protected]>; Wed, 27 Dec 2006 19:49:15 -0800
    X-Orbl: [75.34.9.255]
    Domainkey-Signature: a=rsa-sha1; s=sbc01; d=ameritech.net; c=nofws; q=dns; h=mime-version:content-transfer-encoding:message-id:
    Content-Type: to:from:subject:date:x-mailer; b=RT51cAASkaC4dXKPZSEOEdmv7ApKJ68xdvGgdP7ifDKDoI6j6EIr5dyZl7OrPcoww SjzfTr1nAxHOJGy0wzYeg==
    Content-Type: text/plain; charset=US-ASCII; format=flowed
    Mime-Version: 1.0 (Apple Message framework v624)
    Content-Transfer-Encoding: 7bit
    Message-Id: <[email protected]>
    X-Mailer: Apple Mail (2.624)
    X-Junkmail-Status: score=10/50, host=mr05.lnh.mail.rcn.net
    X-Junkmail-Sd-Raw: score=unknown, refid=str=0001.0A090203.45933D44.001B,ss=1,fgs=0, ip=207.115.20.39, so=2006-05-09 23:27:51, dmn=5.2.121/2006-09-27
    here is the raw source. The last line is what shows up in the mime attachment when it is opened in text edit or viewed at my webmail :
    Return-Path: <[email protected]>
    Received: from mr05.lnh.mail.rcn.net (EHLO mr05.lnh.mail.rcn.net) ([207.172.157.25])
    by ms05.lnh.mail.rcn.net (MOS 3.7.5a-GA FastPath queued)
    with ESMTP id CYF54813;
    Wed, 27 Dec 2006 22:49:31 -0500 (EST)
    Received: from mx06.lnh.mail.rcn.net (mx06.lnh.mail.rcn.net [207.172.157.56])
    by mr05.lnh.mail.rcn.net (MOS 3.7.5a-GA)
    with ESMTP id MDY18691;
    Wed, 27 Dec 2006 22:49:30 -0500 (EST)
    Received: from flpvm09.prodigy.net ([207.115.20.39])
    by mx06.lnh.mail.rcn.net with ESMTP; 27 Dec 2006 22:49:29 -0500
    X-ORBL: [75.34.9.255]
    DomainKey-Signature: a=rsa-sha1; s=sbc01; d=ameritech.net; c=nofws; q=dns;
    h=mime-version:content-transfer-encoding:message-id:
    content-type: to:from:subject:date:x-mailer;
    b=RT51cAASkaC4dXKPZSEOEdmv7ApKJ68xdvGgdP7ifDKDoI6j6EIr5dyZl7OrPcoww
    SjzfTr1nAxHOJGy0wzYeg==
    Received: from [75.34.9.255] (adsl-75-34-9-255.dsl.chcgil.sbcglobal.net [75.34.9.255])
    by flpvm09.prodigy.net (8.13.8 out.dk.spool/8.13.8) with ESMTP id kBS3nEOh005937
    for <[email protected]>; Wed, 27 Dec 2006 19:49:15 -0800
    Mime-Version: 1.0 (Apple Message framework v624)
    Content-Transfer-Encoding: 7bit
    Message-Id: <[email protected]>
    Content-Type: text/plain; charset=US-ASCII; format=flowed
    To: Craig Hlady Hlady <[email protected]>
    From: bohdan hlady <[email protected]>
    Subject: test
    Date: Wed, 27 Dec 2006 21:49:27 -0600
    X-Mailer: Apple Mail (2.624)
    X-Junkmail-Status: score=10/50, host=mr05.lnh.mail.rcn.net
    X-Junkmail-SD-Raw: score=unknown,
    refid=str=0001.0A090203.45933D44.001B,ss=1,fgs=0,
    ip=207.115.20.39,
    so=2006-05-09 23:27:51,
    dmn=5.2.121/2006-09-27
    craig.;;check this one out
    G5 Dual 2.5GHZ, 15 TiBook 1GHZ, I.25 dual G4 MDD, 15G ipod, Beige G3/500GHZ   Mac OS X (10.4.7)  

  • IMac intel -can't install flash9 -MIME problem?

    I was trying to print some cards from designhergals.com and I
    was prompted to get the newest version of flash. I downloaded it
    but when it installed and opened up I got this message that the
    page has content of MIME type "application/x-shockwave-flash" a
    plug in and directs me to adobe to find this plug in. No one at
    adobe seems to know what this is-nor did the person I spent an hour
    with a apple support.
    I now have no flash-despite trying even to download archived
    flash versions. I have reinstalled both safari and foxfire,
    restarted my computer many times, reinstalled flash and unistalled
    flash.
    I am at my wits end, Apple says this is a adobe problem,
    adobe says they don't offer support on this,
    Any help would be greatly appreciated!!
    sue

    quote:
    Originally posted by:
    imacsue
    . How can adobe offer a product that potentially messes up
    your computer-with no references (that actually do anything) on how
    to fix it on their help pages?
    So frustrating-and i've spent hours on this! any one out
    there- please help!
    Well it's unfortunate that you've put that much time into
    this.
    It sounds like you talked to phone support here at Adobe?
    That makes no sense, because there is no phone support available
    for Flash Player (and when there's no phone support, no phone
    agents are trained to troubleshoot the problems! So that's a recipe
    for a bad experience..)
    If you did have a phone case, and have a case number please
    let me know what that case number is.
    The reason you cannot find the documentation on this issue is
    because we are still in the process of finishing it. It will become
    a part of this technote very soon:
    "Flash Player 9 installation fails on Macintosh" (
    http://www.adobe.com/go/4aa64290)
    The root of the problem is a permission issue in OS X
    involving Flash Player. The steps in the existing technote are not
    entirely accurate, and we're working to fix that (and we have
    written about it fairly extensively on this forum...)
    In most cases, running Permission Repair will resolve the
    problem. This will be the first troubleshooting step in the revised
    technote when it's done. To learn about permissions and how to run
    permission repair, I recommend reading this Apple tech doc:
    http://docs.info.apple.com/article.html?artnum=106712

  • MRP view maintenance for Material Master

    What is the basic entry for R3 material master, if, I want EBP below condition works:
    Stock in R/3 sufficient: Shopping Carts creates MatReservation.
    Stock in R/3 not sufficient: Shopping Cart still creates MatReservation, and when run MRP (in R/3), it gives Purchase Requisition, with the exact shortage qty.
    Info: We have set customizing in EBP so that every follow-on document for Shopping Cart will be Reservation.
    -Mimi-

    In R/3  , the material should have MRP view and all planning related settings ...
    wr u want to go for consumption based planning or deterministic planning .
    Based on the planning procedure setting in MRP views of the R/3 sytem , PRs will get generated.
    This is what u are looking for .. otherwise post your feedback...
    Regards
    Mani

  • Upgrade to WAS 6.4 and SPAU on MIMEs

    Hi,
    We've upgraded our WAS to 6.4 and we have some SPAU, which we need to clean up. A major part is taken by MIMEs for some reason.
    We get this hex value and we can't view the actual gif, so we don't know which action to take.
    Does anyone know how we can see what the mime (gifs) look like?
    Many thanks
    Eddy

    First...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
    http://support.apple.com/kb/HE57
    In the US...
    1-800-MY-APPLE or 1-800-676-2775
    Be sure to make a Backup of your Current System Before Upgrading...

  • Can I distribute s/mime certificates to MDM managed users via Mavericks Server?

    We have a private CA and right now users have to share S/MIME certificates with others manually. Is is possible to embed these certs into each user in Address Book, or distribute them some other way using Mavericks Server?

    Couldn't fix the problem. Had to attach another external storage drive to each computer to use for backup, then erase and rename the TimeCapsule hard drive via Airport utility as well as the second hard drive in the MacMini Server via Disk Utility. I removed both the Time Capsule drive and the second internal hard drive from the "Settings" pane in the "Time Machine" section of Server.
    I still have no idea of what went wrong or if the problem will happen again. It may have been a corrupted file on the backup drives. It may have been Tech Tool Pro or Adode Creative Cloud updater, who knows. But for now, it is working as anticipated. The iMac clients and the MacMini Server are all backed up to the Time Capsule as well as the Mac Mini Server's second internal drive.
    I sure wish there were better documentation available for using Server to manage Time Machine backups!

  • General failure creating S/MIME digital signature

    Hai Ramesh,
    I followed the following thread in setting up the certificates
    Tech Note :  Oracle AS B2B - Security configuration
    Delivery channel setup when General failure encrypting S/MIME message error occured
    Host DC :
    I selected host certificate for both encryption and Non-Rep in creating Host DC.
    Remote TP DC:
    I selected remote TP certificate for both encryption and Non-Rep in creating remote TP DC.
    Delivery channel setup when General failure creating S/MIME digital signature error
    Host DC :
    I selected host certificate for Encryption and remote TP certificate for Non-Rep in creating host DC.
    Remote TP DC:
    I selected remote TP certificate for Encryption and host certificate for Non-Rep in creating remote TP DC
    What is correct way to setup certificates?
    Regards
    Praveen

    Hai
    Yes I set password correctly...
    What I observed after going through logs was
    its looking for /SLOTS/slot06/oracle/AS_10gR2_MID/wallet1 but I set
    /SLOTS/slot06/oracle/AS_10gR2_MID/ewallet.p12
    Why its looking for non-existing file....?
    Now logs shows
    oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Entering...
    2007.07.22 at 23:32:06:254: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Sign using the configured certificate
    2007.07.22 at 23:32:06:255: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign wrl: /SLOTS/slot06/oracle/AS_10gR2_MID
    2007.07.22 at 23:32:06:260: Thread-10: B2B - (DEBUG) Utility:getPrivateKey:Enter
    2007.07.22 at 23:32:07:069: Thread-10: B2B - (DEBUG) Utility:getPrivateKey:matching private key found
    2007.07.22 at 23:32:07:069: Thread-10: B2B - (DEBUG) Utility:getPrivateKey:Exit
    2007.07.22 at 23:32:07:070: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /SLOTS/slot06/oracle/AS_10gR2_MID/wallet1
    2007.07.22 at 23:32:07:070: Thread-10: B2B - (DEBUG) Utility:getPrivateKey:Enter
    2007.07.22 at 23:32:07:298: Thread-10: B2B - (ERROR) java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:392)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1699)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1195)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:712)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:855)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:655)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:353)
         at java.lang.Thread.run(Thread.java:595)
    2007.07.22 at 23:32:07:299: Thread-10: B2B - (ERROR) Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1077)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:392)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1699)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1195)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:712)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:855)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:655)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:353)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
         ... 10 more
    2007.07.22 at 23:32:07:300: Thread-10: B2B - (ERROR) Error -: AIP-51083: General failure creating S/MIME digital signature
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:434)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1699)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1195)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:712)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:855)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:655)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:353)
         at java.lang.Thread.run(Thread.java:595)
    2007.07.22 at 23:32:07:300: Thread-10: B2B - (ERROR) Error -: AIP-51083: General failure creating S/MIME digital signature: Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:434)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1699)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1195)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:712)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:855)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:655)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:353)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1077)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:392)
         ... 9 more
    Caused by: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
         ... 10 more
    2007.07.22 at 23:32:07:300: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
    2007.07.22 at 23:32:07:301: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-51083: General failure creating S/MIME digital signature
    2007.07.22 at 23:32:07:301: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
    2007.07.22 at 23:32:07:301: Thread-10: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
    2007.07.22 at 23:32:07:302: Thread-10: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessMessage
    2007.07.22 at 23:32:07:317: Thread-10: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessMessage
    2007.07.22 at 23:32:07:318: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
    2007.07.22 at 23:32:07:318: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
    2007.07.22 at 23:32:07:319: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information

  • Labview Drivers for an Integral Tech Framegrabber

    My company is interested in purchasing a video inspection system that
    uses the following frame grabber:
    http://www.integraltech.com/art/downloaded%20from%20current%20site/fbmv/documents/fbmvlitespecsheet.pdf
    Integral Tech does not make Labview drivers for this card.
    Would there be a way to get these written, or would that be cost
    prohibitive ?
    Thanks for any suggestions.
    Rick B.
    Email: Use Yahoo instead.

    Hi Rick,
    I'm not really sure whether this is what you're thinking of but...
    Since INTEGRALTECH provides a VFW driver for their frame grabber you could,
    e.g., use this tool from aNI server:
    http://exchange.ni.com/servlet/com.quiq.servlet.GetObject/lv_vfw.zip?KEY=101
    ..97.12134.14&SIG=101.97.12134.14&EXT=mime:application/x-zip-compressed
    It works very well but, like any VfW based application, has the disadvantage
    of being able to read out only one camera at time. If you plan to use
    multiple frame grabbers simultaneously you have to find a different
    solution.
    It should also be possible to call the DLLs INTEGRALTECH provides from
    LabView.
    Best regards
    Arno
    "Rick B." schrieb im Newsbeitrag
    news:[email protected]..
    >
    My company is interested in purchasing a video inspection system that
    > uses the following frame grabber:
    >
    >
    http://www.integraltech.com/art/downloaded%20from%20current%20site/fbmv/docu
    ments/fbmvlitespecsheet.pdf
    >
    > Integral Tech does not make Labview drivers for this card.
    >
    > Would there be a way to get these written, or would that be cost
    > prohibitive ?
    >
    > Thanks for any suggestions.
    >
    >
    > ---
    > Rick B.
    > Email: Use Yahoo instead.

  • Order of delivery schedule line counter at schedule agreements from MRP run

    Currently we are using schedule agreements for our long term external suppliers, but we are facing a problem with the order of new delivery schedule lines created during MRP run.
    Because of master data settings like, lot size, rounding value, plan delivery time and planning time fence to set as firm new requirements, multiple schedule lines are created with no order for schedule line counter.
    Does anyone is aware of a BADI, user exit or customizing control to have this schedule line counter in order?
    Thank you
    Daniel Guillen
    IT
    Skyworks Inc.

    Hi,
    Pls put this query in SD fourms  and get immly help because this is technical fourms.
    Anil

  • MRP - Auto creation of del schedule lines based on planned delivery time

    Hi,
    We have activated MRP (type PD) where Purchase requiesition is auto created by system for requirement quantity. We require to optimize delivery schedule in such a way that entire PR quantity is broken into various delivery schedule based on planned delivery time and requirement.  Scenario can be further explained with following example.
    Material Requirement for a month is say 1,25,000 units
    Closing Stock say 25,000 units
    PR Generated by system for 1,00,000 units. The entire quantity is schdulled with only one delivery schedule line as per planned delivery time. 
    The requirement is to generate multiple delivery schedule lines automatically in Purchase requisition based on planned delivery time so that Purchase orders can be placed with system generated delivery schedule lines.
    How can it be achieved ?
    Regards,
    Nirav Kinkhabwala

    Nirav,
    This subject has been discussed repeatedly in this and other forums.  I must assume that you overlooked the rules of engagement, which state that you should first search the forums and other public sites, before posting questions here.
    Standard SAP MRP cannot be made to generate multiple items in a Purchase requisition.  The functionality you seek is usually achieved when converting purchase reqs to Purchase orders, where many single purchase reqs can be adopted into a single Purchase order.
    You also might want to investigate use of Vendor Scheduling agreements.
    Best Regards,
    DB49

  • MRP To Generate SCHEDULE LINES for Scheduling Agreement

    Hi
    I have followed the below steps but still the Schedule lines is not generated for scheduling agreement.
    1Maintain MRP views 1,2,3,4 for the material in material mste.(MM01)
    2. Maintain Purchase Info Record for the vendor plant & material combination.(ME11)
    3. Create Scheduling agreement using ME31L
    4. Maintain source list for the material & the scheduling agreement # and Line item set the MRP relevant indicator 2 (Necessary ?) ME01
    During Run MRP for the material.the below details entered///
    Processing key NETCH Net Change in Total Horizon
    Create purchase req. 1 Purchase requisitions in opening period
    Schedule lines 3 Schedule lines
    Create MRP list 1 MRP list
    Planning mode 1 Determination of Basic Dates for Planned
    Run MDBT or MD02 but still doesn't create the schedule lines......Anything else missing.
    MRP1:
    MRP Procedure: PD
    MRP Group: 0000 (External Procurement only)
    Lot Size: EX (Lot For Lot)
    MRP2:
    Procurement Type: F
    Sched Margin Key: 000
    MRP3:
    Avilablity chec: 02 (Individual requirement)
    MRP: 4
    Nil

    Raj,
    Source List a Mandatory for Scheduling Agreement, if you want to create automatic Scheduling line.
    Plz use (2) in MRP RELEVENT tab in ME01 (Source List).
    rest of the thing is ok, make sure a material master(MRP 2 VIEW) in that view you have to give a planed delivery days. it is must.
    HOPE IT WILL WORK
    Regards:
    Poision

  • Schedule lines are not getting generated through MRP

    Hello Experts,
    While running MRP, we observed that the system is creating PR instead of schedule lines, although all the necessary prerequistes to generate schedule lines through MRP are maintained. For e.g.
    1. MRP Schedule line relevant indicator '2' is maintained in the Source List.
    2. Sch. Agreement dates and Source List validity dates are same.etc...
    Further after some analysis, we observed that if we change the source list validity from date to some back date then system is creating correct schedule lines.
    Example: Material M1; Planned delivery time 7 days; GR processing time 5 days; MRP Type PD; Lot Size WB;
    SA validity dates - 07.09.2011 to 31.12.2011
    Source List validity dates - 07.09.2011 to 31.12.2011
    If MRP run on 12.09.2011 and source list dates are retain same as mentioned above, system creates the PR.
    If MRP run on 12.09.2011 and source list dates changes to 05.09.2011 to 31.12.2011, system creates the schedule lines.
    Could you please let us know, why the system behave like this?

    Dear,
    Welcome to SDN,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
    Regards,
    R.Brahmankar

Maybe you are looking for

  • Output type of purchase order as email

    Hi Experts,                 I want to configure the output type of my purchase order as  email also so that when i can save it as a pdf file. kindly tell me the procedure of configuring it with path in SPRO. Thanks Harmandeep

  • Erro processing

    hello guys, I am uploading the data for AR open items. I am using the BAPI to upload the data. If I get any errors after the data posting is completed.... How to handle those erros... Can anyone guide me please.. SRI

  • First single-boot Linux, in the future multi-boot after addition of Windows

    The given hardware setup is 32Bits Pentium 4 with blank SATA HDD and BIOS. GPT is in seek on that HDD, not MBR. As next it will be setup to single-boot system with Linux. Means amongst others the disk is to be partitioned. However it is unclear if Li

  • How to embed J2EE web application output in iView (NW 7.3)

    Hello experts here my situation: I have a set of JSPs and Servlets accessing a EJB to expose data contained in a DB. All is packaged as explained in the following link: How to use JPA 1.0 with NW 7.30 - CRM - SCN Wiki Everything works perfectly. Now

  • After effects & Premiere Pro CC problems -HELP-

    Hi everyone, I'm having some slight issues with after effects and adobe premiere CS6 CC on my notebook. I downloaded the CC and can install all the apps, and every app (photoshop, illustrator, mediaencoder etc all work. My notebook specs: 8GB ram Nvi