MRS and User Status

Hi Gurus
We are using MRS 8.00.
We decided to activate the usage of user status with MRS. Now it seems that we are missing some configuration. There are three functionality in planning board,  one of them is not working which is  - on the demand item (PM Order Operation) "Set Status Dispatched". Now the question here is how MRS will understand what is meant to be by the status DISPATCHED> There was an abstract status in the initial configuration of MRS and we used that one. We used the configuration step "Assign Status for Demands (ERP)" and we have assigned the Abstract Status DISPATCHED  to an order type/plant and a user status. It seems that we are missing some more configuration steps.
Many thanks in advance

We had a similar requirement and this is what we did :
1) Set up a task as a reciever for the WORKORDER SAVE event.
2) In this task called a method of a business object.
3) In the method called STATUS_CHANGE_EXTERN to change the user status.

Similar Messages

  • How to get system status and user status of service order

    Hi,
    I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
    I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
    Regards,
    Kamesh Bathla

    Hi,
      Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
    Regards
    Srinu

  • System and User Statuses Missing

    Hi All,
    Does anyone know what causes the system and user statuses to disappear on the main screen of the production order.  Normally we see all system statuses  and the current user status like this:
    Status     CRTD PRC  CSER BCRQ MANC SETC  REL
    User Status    ERR
    Some configuration must have changed because even though the statuses are in JEST, they are not displayed on the order.
    Status
    User Status 
    Thanks for the help,
    Malissa

    Malissa,
    Just a different thinking to see, whether we can get some clues.
    I would suggest you get into the order in the change mode,  try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
    Regards,
    Prasobh

  • Fetching the sales order data using both system status and user status

    Hi,
    Could any one tell me how to fetch sales orders using both system status and user status.
    My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
    For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
    Early replies are appreciated.
    Thanks
    Tanveer

    Hi,
    The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
    Regards,
    Dipesh.

  • System status and user status Priority

    Hi All,
    We have system status and user status for the production order, I would like to know which has higher priority.
    E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
    Regards,
    Ranjan

    Hi,
    As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
    Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
    Both work with "AND" condition.
    Regards,
    Rohit.
    Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
    Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
    Hope the example helps.
    Regards,
    Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

  • System status and user status in Line Item Reports

    Dear PS-friends,
    I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
    I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
    Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
    In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
    Has anybody an idea how it works to show the system status and user status in Line Item Reports.
    Thanks in advance!

    Problem is solved.
    I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

  • How to get system status and user status ?

    how to get system status and user status for the given production order?
    In which PP table we can
    find these?
    Thanks&Regards
    Satish

    Hi Ram,
    Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
    Alternatively, the following tables store the user and system status info:
    JSTO- Status object information
    JEST- Individual Object Status
    Hope this helps.
    Let me know if u need further information.
    Regards,
    Sonal

  • How to fetch service order with partucular system status and user status

    Hello All,
    How to fetch service orders with specific system status and user status.
    thanks

    I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
    I want to fetch released service orders with status INIT and RENT.
    Here, SYSTEM Status = Released and
             USER Status     = INIT
                                        RENT
    So is there any function module available for the same.....

  • IO system status and user status

    Hi all,
    Could you please tell me where the link between IO sys and user status.
    Thank you.

    Hi
    System status and User status:
    System Status
    o        The system sets a system status informing the user that the system has executed a certain business transaction for an object.
    o        You can only influence this status by executing a business transaction that changes the system status.
    o        If you release an internal order, the system automatically sets the Released system status.
    User Status
    o        You can set a user status in addition to the existing system status.
    o        You specify the user status in a status profile, which you create for each order type in Customizing.
    o        You can specify and activate any number of user statuses.
    o        In a production order you can simultaneously
    The system status and the user status influence the business transactions in the same way.
    The status profile allows you to:
    o        Define the user status and document its functions with a corresponding long text.
    o        Assign a status number that specifies the order in which the system reaches the user statuses.
    o        Define an initial status, which is then automatically set when an object is created.
    o        Determine that a user status is automatically set when you execute a business transaction.
    o        Permit or forbid specified transactions, if a status is active.
    VVR

  • Displaying Work Order System and User Statuses in IW37 Search

    I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
    David Macindoe

    David Macindoe,
      That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
    Regards
    Narasimhan

  • Status Profile and User Status  for Support Message

    Hi All,
    We need to customize Status Profile and User Status Specifc  to customer requriments.
    we need the following Status for Support Message:
    Open
    Accepted
    Rejected
    Fixed
    Retest
    Closed
    Note:
    1] Only the Message creator should be able Set staus Open and Closed
    2]  Message Processor should only set status Accepted, Rejected, Fixed and Retest
    I have created the Status Profile in BS02.
    Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
    Thanks!
    Regards,
    Pradeep  L

    > 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
           Anand: Diffrent authorization key for different statues......not for message processor and creator
    > 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
           Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
    >     do i have to create a new Zrole and assign or is there any other way.
           Anand: Yes u need to create a Z role and include that authorization objects in that z role....
           so u might have to create 2 Zroles and then assign them to the persons concerned....
    Inspire ppl by rewarding
    Regards,
    Anand...

  • 0NOTIFICATN_ATTR datasource - how it get the system and user status

    Guys,
    I have 0NOTIFICATN_ATTR datasource bringing master data attribute of Notification document into BW. I saw it also bring the document system status and user status. But it only bring in the first status for each. i.e. for a notification document, it can has multiple system status (e.g. ATCO DLFL ...). this extractor only bring in 'ATCO'. while compare to the status DLFL (deletion flag), ATCO didn't really matter again.
    So, i am trying to find out how this datasource extract the status, how can i change the status field into a 40 chars field so i can keep all active status (as it shows in ECC, when user display the notification document status). Did anyone solve this case before?
    Thanks for the help.

    Hi,
    watch the following thread.
    how to extract equipment status in to bw
    and please refer following article by Vamsi
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301941a0-25b4-2d10-6eb9-9758cbc28559
    It would be very useful.
    Thanks.

  • Logistic system and user statuses

    We process PM system and user statuses extensively.  Currently we use a custom extract of table JCDS to an InfoObject with a filter set on UDate (creation date).
         We use PM status information so extensively that I expect there is some “standard” SAP Business Content that would satisfy this data need.  For example in the newly released industry “Defense Forces & Public Security” business content there is a “Master Equipment Status” infoset for the “evaluations of the status of master equipment”.
         Does anyone have any suggestions on the “best practice” for processing “logistic statuses” in BW?
         Thank you very much for you time.

    Malissa,
    Just a different thinking to see, whether we can get some clues.
    I would suggest you get into the order in the change mode,  try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
    Regards,
    Prasobh

  • Difference between system status and user status.

    Can someone explain to me the difference between system status and user status in details

    Hi,
    As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
    In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
    System statuses will be updated automatically based on business transactions which will be done on SAP.
    For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
    If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
    These user status as per the name, should be updated by the user manually.
    Regards,
    Maheswaran.

  • System and user status to BW

    Hi all,
    I need to bring system and user statusses to BW (for wbs-elements and cs/pm orders). I'm fairly new to BW and I cannot find any business content regarding statusses. I have varying reporting needs where these statusses are important. Are there any pitfalls in bringing jest and jcds tables to BW. What would be the most logical place to put this information in: ODS-object or infocube? I want to do an initial full load of all these objects with their current status and status history. After that, I want to weekly load   the delta's.
    Any help would be greatly appreciated.
    Ciao,
    Peter

    Hi Peter and welcome to the SDN!
    well depending on your needs, you can extract all status information coming from jest and/or jcds, tj02 and/or tj30 using generic extraction and posting it into a ODS firstly. Additionally please check note 300300 from SAP. It describes how to add the status information to infoobjects.
    regards
    Siggi

Maybe you are looking for

  • Problems with multiple e-mail accounts on Droid 2 & also can't put phone into Silent mode

    I just received my Droid 2 and having a problems with having multiple e-mail accounts. My original droid worked fine with all of this. I have 2 different personal e-mail accounts setup. When I click e-mail, it just defaults to the default e-mail addr

  • Print an AI-file using PDF

    hello, I'm an illustrator working on CS3 and using especially different brushes in my artwork. What I am asking myself (and never got a specific answer) is : when I prepare my AI-files for the agency who will print them, I save them as high quality P

  • WRT54G v5 Connection problem

    Hello! Ive had a WRT54G v5 for awhile now.  And just recently I went out of town and had turn off my router.  When coming back and turning everything back on for some reason both wired and wireless components both have a connection then it loses the

  • Converting transparent GIF and PNG to JPEG

    Hi, I have been reading in various sample gifs and png files and converting them to jpeg via javax.imageio. This works fine if there is no transparency colour defined in the png or gif file. But if it has a transparency colour, the resulting jpeg is

  • Re: How to install Windows from recovery media on a new hard drive?

    Immediately after a Windows update, my computer would not restart. It said disk error. I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now when I put in the recovery media to install Window