MRVCR80.dll error when trying to open iTunes

It keeps telling me to reinstall iTunes, I tried to repair, install, etc. and it keeps telling me I have the MRVCR80.dll error. This has never happened...what do I do?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Similar Messages

  • I get the following error when trying to open iTunes

    I get the following error when trying to open iTunes:
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    AVCFAssetCreateWithByteStreamAnd Options could not be located in
    the dynamic link library AVFoundationCF.dll.
    Any help would be much appreciated.
    Thanks,
    John

    I get the same error,
    Have you found any solution?
    Please let me know
    Thanks
    Premal

  • I received an error when trying to open itunes

    I received an error when trying to open itunes.  It said itunes stopped working, so I tried to uninstall and re-install.  It let me install it, but when I tried to open it, it gave me the same error message.  How can I get itunes back on my laptop (windows).

    Perhaps is post what the error is someone might be able to offer assistance.
    Also, have you had a look here  >  http://www.apple.com/support/itunes/troubleshooting/

  • How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

    How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

    This also work100% 
    Removing and reinstalling iTunes and other software components
    If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (see note 1 below)
    iCloud (if present)
    MobileMe (if present) (see note 2 below)
    Bonjour
    Apple Application Support
    Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iPod
    C:\Program Files\iTunes
    also on 64-bit systems:
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple
    C:\Program Files (x86)\iPod
    C:\Program Files (x86)\iTunes
    Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
    If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

  • Softpub.dll error when trying to start iTunes

      Every time I try to open itunes I receive the following error message.
    "C:\windows\system32\softpub.dll is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
    I have tried repairing and reinstalling itunes multiple times. I have tried doing this:
    1. Go to the Start Menu and type CMD into the search bar.
    2. Hit enter.
    3. A black box should appear on your screen. Type in: sfc /scannow (Note: There is a space be-tween sfc and /scannow)
    4. Windows will scan your computer for any broken or corrupt files.
    5. If Windows did find any corrupt files restart your computer.
    but when I was done it told me errors were found but they could not be fixed.
    I am running Windows 7 Service Pack 1 on a Dell Inspiron 1545 laptop.
    Any advice would be greatly appreciated. I have seen similar threads and tried what they sugggested but have had no success thus far.
    Thanks,

    Bump. Anybody have any advice?

  • BEX error when trying to open Itunes

    I can't open Itunes, I have tried uninstalling it and all its componenets several times. I have tried a bootstrap start-up, creating another user, and none of them have worked. This is the error message I get:
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.2.1.1
    Application Timestamp: 4d756476
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 74686761
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt

    I am having the same problem with this error message
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    11.2.0.115
      Application Timestamp:    53755cb7
      Fault Module Name:    StackHash_0a9e
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    00000008
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    5129
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    have tried everything suggested and still no working. Please help!!

  • System Error when trying to open Itunes.

    When I try to access Itunes from my laptop, I get an Itunes system error that says; program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem.  I uninstalled Itunes from my laptop and then reinstalled Itunes, but I get the same system error message.  Please help!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Error when trying to open iTunes

    I just got a new harddrive and the first time that I went to access my iTunes library it worked. Now when I go to open it I get the message : The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file.
    Does anyone have a clue what I can do to fix this. Thanks:)

    It sounds as though you have this problem:
    http://docs.info.apple.com/article.html?artnum=302398
    You can download Microsoft Power Toys including Tweak UI here:
    http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
    TweakUI can’t see Music Folder
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188
    If you don't want to go through all that and you are on iTunes 7, try starting iTunes with the shift key held down. It should invite you to choose a library.
    Choose iTunes Library.itl which should be in:
    My documents\My Music\iTunes

  • AdobeXMPCompareAndMerge.dll error when trying to open Premiere Pro

    My trial had expired and did not recognize that I had purchased CC. I uninstalled then installed from my Adobe account. Now if I try to open Premiere, it pops the error message attached. I have uninstalled/reinstalled Premiere and even uninstalled/reinstalled CC altogether. Anybody else run into this?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • I'm getting an error message when trying to open itunes on my desk top

    I'm getting a Run time error when trying to open itunes on my desktop

    Hello, Sherry.
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • I just agreed to a update of iTunes and now I get a "language" error when trying to open it.

    I just agreed to an update of iTunes on my imac (running OS-X 10.8.4) and now I get an error when trying to open iTunes.  The error is: "This version of iTunes has not been correctly localized for this language. Please run the English version."  What? 
    I'm not a tecchie and could really use some step-by-step instructions on how to get my Itunes working again!  I've never changed the language on my Mac...have no idea where this language error came from.
    Thanks!

    Hello E1777,
    You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
    iTunes 11.0.4
    http://support.apple.com/kb/dl1614
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

    Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
    Have repaired , reinstalled , created and used a restore point etc etc
    How do I fix this !!! Please

    ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • I have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    i have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    The first error comes when i open my laptop:
    APSDeamon.exe -  System Error
    The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
    when I try to open Itunes, it says:
    iTunes.exe
    iTunes was no installed correclty, please re-install itunes
    Thanks!
    Annabel

  • Error -50 when trying to open itunes

    i keep getting an error -50 message when trying to open itunes...i have tried uninstalling and reinstalling i tunes.  i can see and play individual songs from my library though.  suggestions?

    Apple just released iTunes 10.3.1 and this article to fix this problem. It looks like you'll just have to update to iTunes 10.3.1.
    iTunes: "-50" alert when syncing your iOS device to iTunes 10.3
    WTH.

  • Error - 50 when trying to open iTunes. Have tried uninstalling all 6 components and reinstalling but no joy :(

    Error - 50 when trying to open iTunes. Have tried uninstalling all 6 components and reinstalling but no joy Happened after an upgrade. Can anyone help?

    By way of experiment, let's try launching iTunes as an administrator.
    In Computer, open Local Disk C: or whichever drive you have your program files installed on.
    If you have a 32-bit version of Windows, open the "Program files" folder.
    If you have a 64-bit version of Windows, open the "Program files (x86)" folder.
    Open the "iTunes" folder.
    Right-click on the iTunes.exe file and select "run as administrator".
    Does it launch without the -50 now?

Maybe you are looking for