MS 12.0.1: Custom created part cannot cut/paste, just disappears

I created an opamp part in MS and it seems to work fine, except when I cut section A from the circuit, then try to paste it back into the circuit, it disapears. Other opamps from the MS master database, I can cut and paste back into the circuit fine. Or, if I select replace component from the context menu, and try to replace it with the same component, it disappears. If I paste it near-by and make all of the connections manually, then that seems to work OK.
Can you check the part and let me know what's wrong with it?
Thanks.
Regards,
Who
Attachments:
Cannot cut-paste custom opamp part.ms12 ‏64 KB

Hello,
I found that it seems to be an issue with the zero length pins. As soon as I changed them the part behaved properly. I have reported this as it the functionalty should work regardless of the pin length.
Regards,
Miguel V
National Instruments

Similar Messages

Cannot cut/paste or drag/drop

I have just upgraded to Lightroom 2.1 on my Mac so I hope that this isn't a dumb question -
After the upgrade I cannot drag and drop any image to a collection. The cut/paste options are gray so I cannot choose them and I cannot seem to move any image from within a collection. All of these worked fine with the previous version of Lightroom.
I have tried with a brand new Catalogue - same problem - I have tried with a new catalogue on a different hard disk - same problem!
I can edit the images - but I just cannot drag them in the same way that I did with Lightroom before. I have searched the knowledge base with no answers as yet.
I do hope that I am just forgetting something!

Hi John,
Yes, I am dragging from the image itself - exactly as I used to in 1.4
It is odd, but it is as if there is a permission problem with the file - but I am allowed to edit.
I would have thought that it might be a problem in drag and drop but the fact that the cut and paste options are gray too is a bit confusing.

I cannot Cut & Paste

As of today my I-Mac will not either cut or paste nor will it drag an icon. Did I get a virus that might cause this?

The symptom you relate does not indicate a virus, nor would any be likely in a Mac.
However some other issues may cause the evidence you notice, and perhaps to test
the computer OS X by using a different user account to see if the problem is system
wide or if you have some software conflicts in the main account in primary use.
Sometimes an interface problem can be resolved simply by restarting. Other times,
by use of SafeBoot, then repair disk permissions; look into console logs for hangs
and other evidence of cause in relation to Time and Date of the occurrences. You
could also consider booting into Recovery then use OS X Utilities to repair the
computer's disk drive; there are other utilities you could use to help diagnose issues.
Usually the system logs can reveal ever so much; however most users are not experienced
in reading, understanding, or acting on the evidence available from that venue. The use of
Terminal utility, and Console logs require an understanding of the underpinnings of OS X.
And I don't have the time or patience to delve into those aspects, due to other matters.
Did you try a different keyboard & mouse, since the problem may be in peripherals and
not necessarily in the OS X? A Bluetooth keyboard or other accessory in-line may be a
cause of problems. To have and use a USB keyboard to troubleshoot this is suggested.
Hopefully this issue has a simple resolution; no virus is likely. Even malware isn't.
If you have popups and adware, that's another story. Avoid cleanmymac and other
items, and scanning AV applications only eat up processor & memory cycles. They
cannot detect what does not exist. ClamXAV is a basic way to find & isolate a few
items that you may find in files that come from the web, and remove them. There is
no viable connection between the inability to cut & paste, to a virus...
Good luck & happy computing!

I cannot cut + paste Captivate slides/

Hi there guys
I'm using Captivate 6 and I've made a fairly large project (28 slides). I now wish to split this up into 2 smaller projects so I can publish them separately, however, I'm not sure how to do this without reinventing the wheel? I'd like to export them as SCORM-ready files.
Thanks for any assistance you may be able to offer!

Hello ,
You can simply Select the slides from the filmstrip and then copy and paste to new project .
If you also have a quiz result slide in your project then you need to uncheck it while copying the slides , as you can not move quiz result slide of one project to other.
Once you copy the slides with quiz in it , quiz result slide will also get created in new project.
Thanks and Regards
Himanshu Satija

Lightroom 5.7 installed cannot cut

Just installed Lightroom 5.7 to my Win 7 laptop, cannot cut & paste text from any other application or web page to the caption box in library. Any one else having same problem? Open to other suggestions.

Technically speaking, there isn't a CC version of Lightroom. There is only one version of Lightroom, but it is licensed in different ways. One way is through the creative cloud, and that requires that you login to the creative cloud application manager with your Adobe ID and password. The other way is to purchase the standalone license and install it using the serial number that you will be provided. Other than that the programs are identical. Of course, the standalone version cannot function with the Lightroom mobile feature because that requires a creative cloud subscription.
Some will maintain that it isn't necessary to uninstall standalone Lightroom and then install from the creative cloud application manager. I chose to do it anyway. I uninstalled my Lightroom 5 standalone version and then installed from the application manager. As soon as the installation was complete, I double clicked on the desktop icon for Lightroom and was right back in my catalog that I had been using. There was no interruption whatsoever, and there was nothing that had to be compensated for or adjusted.
Installing Lightroom from the creative cloud application manager installs Lightroom and Photoshop locally on your hard drive. The creative cloud is accessed periodically to verify that your subscription is paid up to date. But other than that the programs function locally on your computer.

Can I reload OS X 10.9.3 safely? ISSUES: •Cannot Cut

Can I reload OS X 10.9.3 safely? ISSUES: •
Cannot Cut & Paste in iWork 09 or MS2011 •
Cannot Print in solid Black but can print colour and greys •
Command, Option, Control and fn keys cause gibberish instead of correct fonts to display or print I am having issues that are the same if I use iWork 09 or MS2011 and cannot cut and past from Safari or indeed any other application to a Pages App document or Word document. Also, the Command, Option, Control and fn keys, when left on accidentally, when they did not before some upgrade as they are typing gibberish and sending emails before I have pressed Send, which has been causing serious business problems of embarrassment. I find much has slowed up in response times and is not slick in operation speeds. It has slowed down but I have not noted if any particular update caused any of these changes or degradation except other than when SAFARI was upgraded on 20 June my HP Officejet 7500 E910 is not printing in BLACK. I have tried the standard practice of turning unplugging power, then USB cable etc and it prints in colours but not solid black and will print in GREY VERSIONS of BLACK. Computer Model - iMac 21” 2011: 3.06 GHz Core i3 Processor with Memory of 12 GB 1333 MHz DDR3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Create custom web-part page with OOTB page layout using CSOM (Javascript)

Hi,
I need to create a custom webpart page with a OOTB page layout (eg. Header 3 column footer) using JSOM.
I found a link to do this using CSOM: http://spdevlab.com/2013/03/28/creating-wiki-web-part-and-publishing-pages-via-csom-in-sharepoint-2010/
But here i have to copy the page template from 15 hive and store it in a resource file and I am also getting error as "The request message is too big" and to fix this I need to run a powershell script but I need the code to run in SharePoint online
also.
Isn't there a simpler piece of code in which I can enter the name of the page layout(OOTB/Custom) while creating a page in JSOM as we have in SSOM?
Thanks for the help
sunny

Hi,
According to your post, my understanding is that you want to create a custom web part page layout template.
There are some articles about how to create the custom web part page layout template, you can refer to them.
http://www.manageprojectsonsharepoint.com/blog/2011/03/14/creating-your-own-web-part-page-layout-template/
http://sandeeppawar.blogspot.com/2012/06/create-custom-web-part-page-template.html
http://doitwithsharepoint.blogspot.com/2011/08/create-web-part-pages-with-custom.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

2013 Custom Web Parts in Page Layouts not showing for users

Custom Web Parts in Page Layouts not showing for users
I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
Any help would be appreciated, Havent found anything on this issue online. weird.

It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
John Architect

How to play share point library video in custom web part

Hi ,i want to play my share point library videos and computer videos in custom web part , how can i do this ,playing static video and library video both are common.
Thanks,
Madhu.

Do you want to create a player from scratch or use eg. the Silverlight media player:
http://jomit.blogspot.de/2009/12/using-silverlight-media-player-of.html
or alternatively html5 and the <video> element (will probably require a couple of tweaks in the master page) ?
Kind Regards
Bjoern
http://spviking.com
Twitter: Follow @bjoern_rapp

How to fix javascript error/bug on custom web part of SharePoint 2013

I have a custom web part with serveral business fields. This web part is installed on DispForm, EditForm an NewForm.
But, I click on Attach File button and a javascrit error is throw on my browser's status bar.
Line: 5279
Character: 5
Code: 0
URI: http://mysite:4000/_layouts/15/form.debug.js?rev=vyMg8qjZfJ8La1jn7bQ2cg%3D%3D
How to solve this problem? I think it is a javascript conflict
Tarcísio Corte [email protected]

Hi,
1. You can create a simple demo web part without your custom code firstly, then insert it into your form pages to see if the similar issue would occur. If it works, then add your
other code into it one after one. By doing this, it will be easier to find out the root cause of this issue.
2. What browser do you use? Please try to use IE 10(SharePoint 2013), IE8(SharePoint2010).
3. You can also debug your code using IE F12 Developer Tools.
http://blogs.msdn.com/b/kaevans/archive/2011/04/25/debugging-javascript-with-the-ie-developer-tools.aspx
If the issue still exists, I can suggest you provide more information for further research.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Data Pump Export issue - no streams pool created and cannot automatically c

I am trying to use data pump on a 10.2.0.1 database that has vlm enabled and getting the following error :
Export: Release 10.2.0.1.0 - Production on Tuesday, 20 April, 2010 10:52:08
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_EXPORT_TABLE_01 for user E_AGENT_SITE
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 600
ORA-39080: failed to create queues "KUPC$C_1_20100420105208" and "KUPC$S_1_20100420105208" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1555
ORA-00832: no streams pool created and cannot automatically create one
This is my script (that I currently use on other non vlm databases successfully):
expdp e_agent_site/<password>@orcl parfile=d:\DailySitePump.par
this is my parameter file :
DUMPFILE=site_pump%U.dmp
PARALLEL=1
LOGFILE=site_pump.log
STATUS=300
DIRECTORY=DATA_DUMP
QUERY=wwv_document$:"where last_updated > sysdate-18"
EXCLUDE=CONSTRAINT
EXCLUDE=INDEX
EXCLUDE=GRANT
TABLES=wwv_document$
FILESIZE=2000M
My oracle directory is created and the user has rights
googling the issue says that the shared pool is too small or streams_pool_size needs setting. shared_pool_size = 1200M and when I query v$parameter it shows that streams_pool_size = 0
I've tried alter system set streams_pool_size=1M; but I just get :
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04033: Insufficient memory to grow pool
The server is a windows enterprise box with 16GB ram and VLM enabled, pfile memory parameters listed below:
# resource
processes = 1250
job_queue_processes = 10
open_cursors = 1000 # no overhead if set too high
# sga
shared_pool_size = 1200M
large_pool_size = 150M
java_pool_size = 50M
# pga
pga_aggregate_target = 850M # custom
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# vlm support
USE_INDIRECT_DATA_BUFFERS = TRUE
DB_BLOCK_BUFFERS = 1500000
Any ideas why I cannot run data pump? I am assuming that I just need to set streams_pool_size but I don't understand why I cannot increase the size of it on this db. It is set to 0 on other databases that work fine and I can set it which is why I am possibly linking the issue to vlm
thanks
Robert

SGA_MAX_SIZE?
SQL> ALTER SYSTEM SET streams_pool_size=32M SCOPE=BOTH;
ALTER SYSTEM SET streams_pool_size=32M SCOPE=BOTH
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04033: Insufficient memory to grow pool
SQL> show parameter sga_max
NAME                         TYPE      VALUE
sga_max_size                    big integer 480M
SQL> show parameter cache
NAME                         TYPE      VALUE
db_16k_cache_size               big integer 0
db_2k_cache_size               big integer 0
db_32k_cache_size               big integer 0
db_4k_cache_size               big integer 0
db_8k_cache_size               big integer 0
db_cache_advice                string      ON
db_cache_size                    big integer 256M
db_keep_cache_size               big integer 0
db_recycle_cache_size               big integer 0
object_cache_max_size_percent          integer      10
object_cache_optimal_size          integer      102400
session_cached_cursors               integer      20
SQL> ALTER SYSTEM SET db_cache_size=224M SCOPE=both;
System altered.
SQL> ALTER SYSTEM SET streams_pool_size=32M SCOPE=both;
System altered.Lukasz

Indesign frequently fails during "create parts" for Review

It's too bad I cannot search these forums... It's amazing they have been broke this long, c'mon Adobe, it's 2006 already, get with the times!
I find that I have to kill Indesign CS5 and restart it (indd) in order to successfully add to an existing (CS) Review. Sometimes after restart I can upload many pages, all pages, no problem, sometimes I can add one, then it fails again.
Adding parts to a Review is VERY frustrating for me, almost to the point where I don't want to do it anymore and just send out hardcopies, or PDF's.
Is anyone else having frequent trouble with review? When I have the problem, indd hangs (in background) on the "creating parts" phase.
Windows 7, quad core, 8GB, plenty of free space.
Thank you
Paul

uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
if you still see exit code 6, Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5

Custom created field created using Addon is overlapping in BP Master form

Hi All,
I have developed an addon to create some custom field in Business partner master data form. Every thing is working fine but the issue is that when I am maximizing and minimizing the BP form the custom created fields are overlapping with existing SAP B1 field. i have created this fields as the sample specified in SAP B1 SDK. I am giving the sample code below please rectify me if I have made any mistake.
                   lItem = form.Items.Add("CBWBCUSTGR", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX);
                    lItem.FromPane = form.Items.Item("222").FromPane;
                    lItem.ToPane = form.Items.Item("222").ToPane;
                    lItem.DisplayDesc = true;
                    lItem.Left = form.Items.Item("222").Left;
                    lItem.Top = form.Items.Item("222").Top + 15;
                    lItem.Width = form.Items.Item("222").Width;
                    lComboBox = (SAPbouiCOM.ComboBox)lItem.Specific;
                    lComboBox.DataBind.SetBound(true, "OCRD", "U_WBCUSTGR");
l                  Item = form.Items.Add("STWBCUSTGR", BoFormItemTypes.it_STATIC);
                    lItem.FromPane = form.Items.Item("223").FromPane;
                    lItem.ToPane = form.Items.Item("223").ToPane;
                    lItem.Left = form.Items.Item("223").Left;
                    lItem.Top = form.Items.Item("223").Top + 15;
                    lItem.Width = form.Items.Item("223").Width;
                    lStaticText = (StaticText)lItem.Specific;
                    lStaticText.Caption = "Web Customer Group";
Thanks and Regards
Utpal Maity

Hi All,
I have tried the solution provided by you by modifying the code as written below but when i am minimizing it the fields are getting overlapped.
      lItem = form.Items.Add("CBWBCUSTGR", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX);
                    lItem.FromPane = form.Items.Item("222").FromPane;
                    lItem.ToPane = form.Items.Item("222").ToPane;
                    lItem.DisplayDesc = true;
                    lItem.Left = form.Items.Item("222").Left;
                    lItem.Top = form.Items.Item("222").Top + 15;
                    lItem.Width = form.Items.Item("222").Width;
               lItem.LinkTo = "STWBCUSTGR";
                    lComboBox = (SAPbouiCOM.ComboBox)lItem.Specific;
                    lComboBox.DataBind.SetBound(true, "OCRD", "U_WBCUSTGR");
l                  Item = form.Items.Add("STWBCUSTGR", BoFormItemTypes.it_STATIC);
                    lItem.FromPane = form.Items.Item("223").FromPane;
                    lItem.ToPane = form.Items.Item("223").ToPane;
                    lItem.Left = form.Items.Item("223").Left;
                    lItem.Top = form.Items.Item("223").Top + 15;
                    lItem.Width = form.Items.Item("223").Width;
               lItem.LinkTo = "CBWBCUSTGR";
                    lStaticText = (StaticText)lItem.Specific;
                    lStaticText.Caption = "Web Customer Group";
Thanks and Regards
Utpal maity

Error while creating part appraisers using HRHAP_DOCUMENT_CREATE

Hi All,
I was able to successfully create a appraisal document by using HRHAP_DOCUMENT_CREATE function module.
There was a additional requirement that part appraisser details also need to be updated while the document is created.
I am getting an error saying
Maximum of 00 part appraisers allowed for template
When i create the document by using transation PHAP_CREATE for the same template i am able to create part appraisers and there it says the maximum part appraisers is 14
The more puzzling aspect is that when i try to add the part appraisers for the same document via HRHAP_DOCUMENT_MODIFY i am able to do so.
Kindly let me know if i am missing something while creating the document.
Any help is highly appreciated

Hi
You have, as far as i can determine without seeing the template,defined no Part Appraiser Column (PAPP) in your template. But you have defined a function on the template to automaticly default the part appraisers.
On the Appraisal document persons (appraiser / appraisee) are getting defaulted as part-appraisers although no part appraisal column excist,and therefor 00 Part Appraisers are allowed. This gives the error. Remove the Part Appraisers default functionality from the template and this problem will be solved.
FYI: The reason why this doesn't give a business check error is that the functions to default participants are BAdI's and we have no means of determining wether or not a BAdI implentation will create an inconsistency on the appraisal document.
Also, the reason that it occurs as a S message and not as E or W is because of programming restrictions in combination with messages. All errors on the Appraisal Document will come as 'S' messages.

HT204230 this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up how i can fix it please help me iPhone 5s, iOS 8.3

this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up how i can fix it
please help me
iPhone 5s, iOS 8.3

Create a new AppleID on a different iOS device or on a computer. You will
then be able to use that newly created AppleID on your iPhone.

MS 12.0.1: Custom created part cannot cut/paste, just disappears

Similar Messages

Maybe you are looking for