MS 12.0.1: How to control inital location of value and refdes text?

When I use an opamp part from the master database, the part number (value?) and refdes are always initially located well away from the symbol. When I create my own opamp, the part number and refdes are located right by the symbol, typically blocking some pins. I do realize I can move the text. What I'd rather do is know what to do when creating the part that makes the text pieces be initially well away from the pins.
Thanks!
Regards,
Who

OK, thanks. I'll try that. However, it doesn't seem very practical to create a part, then have to mess around with the symbol so that the text fields don't get in the way when placed.
When I create a footprint in UB, I can control whether or not the component value and/or refdes will show up on the silkscreen layer, and if they do display, I can control their initial position.
When I create a component in MS and I choose to edit the symbol in the symbol editor, I should be able to control the same thing.
Regards,
Who

Similar Messages

I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

I ask the third time:
How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
hope of feed back: e-mail: [email protected]

Chris Cox answered your question here:
I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

How to control the location of Iconified JInternalFrame?

Is there any way to control the location of Iconfied JInternalFrame on JDesktopPane? I've searched API reference and tried to find suitable methods to override in UI classes. But I still cannot figure out how to do it after a long time. Who have any ideas about it? Thank you very much.

DefaultDesktopManager.iconifyFrame(...);

How to control the R/3 prod and BW prod when diff teams works at the same

Hi Friends,
I would like to check with you guys, I'm working for support project at the same time different teams are using same server.
If the different teams are being used same Master data as well, We don't know what are the teams developing which are the objects.
Now the problem is when we check in the BW production every time having probem e.g: Inactive Masterdata Info Object, ODS replication etc.
I would like to ask you guys, Normally this being the case, How we can control the R/3 Production and BW production.
Can anybody give some valuable inputs...if it's applicable we'll implements in my project as well.
SIRI

Hi Siri
If am correct , your concern is when a development team sends some objects to production as part of their project, you see discrepencies of some master data being inactive .
Your Question is,How to coordinate those?
You sais you are working for Support means Data loads, then development team also works for the same server moving to Prod. then obviously there should be soem integration of all the teams for the work going live in production, maintain a call with all your team when and all objects are moving to Production and check if any impact of those objects for you when they are moved to Prod.
But all the time objects moved to prod will be supported by the development team for short period for its stabilization there.
Hope you need to have coordination with the team .......
Regards

How may control the volumen in microphone and speakers

Hi all
How may control the volumen in the microphone and speakers with JMF. What I need to do this?
I need control this with JSliders component, for rice and lower the volument how in the microphone as in the speakers.
Thanks for his help?

waiting on the line

How to NOT retain formatting when copying and pasting text

Captivate 7 keeps the formatting from my text sources when I paste into a Text Caption which is not what I need. Anything I could find in the forums where questions relating to "keeping" the source formatting. I don't want this, I want Captivate to keep its text formatting when I paste text into a text caption. I even did a test creating a new project and using one of the Cap 7 themes. If I paste text in the default capture caption style object, it retains the formatting of the copied text source. I have been working with Captivate 7 since a few months now and, until this morning, when I copied and pasted text from another source into my Captivate Text Caption, it retained the format of my Captivate Text Caption object. This is exactly what I need. How can I get this behavior back?
I appreciate any help. Thank you.

Hi there
Well, first I would report it as undesired behavior and possibly ask for an enhancement that allows us to right-click and paste without formatting. Do this using the link below:
http://www.adobe.com/go/wish
For now, you have a couple of options.
1. Perform a side trip. Open a text editor such as Windows Notepad or Apple Textpad and paste, then copy back to the clipboard. Then paste the text into the caption. (When pasting into the text editor, formatting is stripped)
2. On Windows machines, you can usually find a clipboard utility that allows you to paste as pure text. In fact, one such application is called PureText.
PureText Home Page (Note that I have no affiliation with them and nothing to gain if you choose to use the product. Just wanted to make you aware of it.)
Cheers... Rick

How do I retrieve my recent calls and recent text messages after I restored the settings

How do I retrieve my recent call log and recent text messages after I had to restore the settings?

If they were in your most recent back up and you restore your phone to that back up, you'll get them back. If they're not in the back up, there's no way to get them back.

How send e-mail with XML + PDF and body text

Hi everyone,
I have a new requirement but I´m with doubts, how to send an e-mail with two attachements (XML and PDF) and body text using -
MIME: multipart/mixed;boundary
I already have code to send XML + body text as you can see below:
Element contentType = docout.createElement("Content_Type");
root.appendChild(contentType);
Text contentTypeText = docout.createTextNode("multipart/mixed;boundary=--AaZz");
absTraceLog.addDebugMessage("Content_Type e-mail --- "+contentTypeText.toString());
contentType.appendChild(contentTypeText)
String text = "----AaZz\r\nContent-Type: text/plain; charset=UTF-8\r\n" +
        "Content-Disposition: inline\r\n\r\n" + nfeText +
        "\r\n----AaZz\r\nContent-Disposition: attachment; filename="+ prefixo +" "+ chaveNFe +".xml" +"\r\n\r\n" + xmlString + "\r\n";
Element content = docout.createElement("Content");
root.appendChild(content);
contentText = docout.createTextNode(text);
Content.appendChild(contentText);
The code above work good, but I can´t duplicate any field from XiMail 3.0 - because it´s 0:1.
So how to do that ?
Thanks.
Regards,
BR.
Viana.

Eng,
That´s works good with mailPackage:
            content= "--" + "--Zz" + CRLF
                    + "Content-Type: text/html; charset=UTF-8" + CRLF
                    + "Content-Disposition: inline" + CRLF + CRLF
                    + textBodyMail + CRLF
                    + "--" + "--Zz" + CRLF
                    + "Content-Type: application/xml; name=" + attachmentName + CRLF
                    + "Content-Disposition: attachment; filename=" + attachmentName + CRLF
                    + "Content-Transfer-Encoding: base64" + CRLF + CRLF
                    + encoder.encode(inputString.getBytes("UTF-8")) + CRLF
                    + "--" + "--Zz" + CRLF
                    + "Content-Type: application/pdf; name=" + pdfName + CRLF
                    + "Content-Disposition: attachment; filename=" + pdfName + CRLF
                    + "Content-Transfer-Encoding: base64" + CRLF + CRLF
                    + encoder.encodeBuffer(new BASE64Decoder().decodeBuffer(pdfAttachment));
Regards,
BR.
Ricardo Viana.

How to control file location of iPhone pictures?

I have invested a lot of time into figuring out a smart way to combine Apple's approach of handling images (database-driven) with the approach of all other services (file-driven) but was not successful yet. I really hope you can help me.
Problem: I take a lot of picture on my iPhone and want them to be:
in a useful location on my drive based on events (e.g. Pictures/Christmas 2013/IMG_123.JPG) which enables me to use file-based services like dropbox
in iPhoto
My problem: if I attach my iPhone and start iPhoto, I can import images from the iPhone without any control over where they are placed on the hard disk.
I tried several ways to work around this:
Find the images in the iPhoto Library folder and move them --> iPhoto doesn't find them anymore. Unfortunately it doesn't ask me where to find them but just shows an error symbol.
Export the images and reimport them --> A lot of manual effort + I loose some timestamp information
Hack into the SQLite DB of iPhoto --> I managed to update the imagePath in iPhoto but then found out that the location is additionally stored in a file alias which is stored in SQLite as a BLOB. I don't see a chance to create/update such an alias
Any idea how I can control where images are stored? Should I use another mechanism to import images from the iPhone instead of importing directly into the media library?

in a useful location on my drive based on events (e.g. Pictures/Christmas 2013/IMG_123.JPG) which enables me to use file-based services like dropbox
Do you want to store the original image files in a synced folder like your dropbox folder? Then you are risking to breaking the connection between your original image files and the versions in your iPhoto library.
Image files managed by iPhoto are best left alone. iPhoto offers many safe ways to access the photos, and probably can what you want be done, by using iPhoto's interface. What yo not can do in iPhoto is syncing the library to other macs.
Any idea how I can control where images are stored? Should I use another mechanism to import images from the iPhone instead of importing directly into the media library?
The only way to control where images are stored, is to avoid importing them in the first place. If you disable "Copy items to the iPhoto Library". Then your image files wil remain exactly where they are. But this method is not recommended, because it is a disaster waiting to happen. Images imported this way cannot be rlocated to another drive, if you are running out of space, they are difficult to restore from backup, and they are not well protected and may be accidentally moved or deleted. If you need a photo library that supports this kind of staorage better, upgrade to Aperture.

How to control Remaining plan order value in PS

Hi Gurus,
I don't want to check budget in remaining order plan value at the time of Production order creation.
how can i control this. please suggest on this..
regards,
siddu.

Hi Siddu,
OPSV transaction to stopping plan value updating in plan version from production order.
so uncheck mark those parameter then test this scenario.
let us know if have any issue?
my assumption is on remaining order plan. Assigned = Actual Costs + Commitment + Remaining Order Plan
take example as we have PR=10qty, PO=10qty, GR=5. When we force close the PO, the 5 open quantity going to Remaing order plan, therefore the money trap in remaining order plan
so you can do teco to cost object is the one solution for above issue or reduce the quantity from PO so that it won't be go to remaining order plan. and 3rd one is like cost Project System > Costs > Budget > Define tolerance limits or Specify exempt cost elements but it will change your existing functionality so i would like suggest you to go through root cause by sap.
Regards,
Sanjeev

How to control the line in--- PLAY and STOP ?

Hi,
   This is the volume control library downloaded from NI wed site .It is help for my task.
   My task is to control the line in with LabVIEW, for example STOP, PLAY and adjust volume with LabVIEW button.Though the example I see the volume control can be enablement.But I don't know how to design the PLAY and STOP button.
   I see it is similar to the volume control.There is function to control the the PLAY and STOP in the system Library-winmm.dll. I don't know whether all I think is right.I have the following serial question. How to use the function?How to understand the system Library?I can't acquire some information from it and I don't know the input and output parameter in the funcion.
   Can any one help me out please?
   I'm sorry that my English is poor.
   Thanks.
lizhi
Attachments:
VolCtrl.llb ‏193 KB

I assume you are referring to audio line-in volume control and lerft-right balance...
If so, then check out this thread:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000D83A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Look at the info near the bottom from Paul S & Spectre. They talk about "winmm.dll"
-cheers-
JLV

How to control the location of Popup window on applet?

I constructed an applet with some buttons on it.when one of the buttons is clicked, a popup frame will display. What I want to do is to control the frame display location on applet, hopefully around the trigger button. Does anyone know how to do that?
i am using JDK1.1
thanks in advance.

setLocation()

How to control the location of the SOAP:address element in the WSDL

I have an EJB exposed as webservice in WebLogic 10.3. Further, the EJB has been annotated with the WebService annotation as in:
@WebService(name = "S_CALCULATORname", serviceName = "S_CALCULATORserviceName",
targetNamespace = "http://tempuri.org/SCalculator/")
@Stateless(name = "S_CALCULATOR")
public class S_CALCULATOR_Beanxxxxxx
The location attribute of the SOAP:address element in the WSDL document generated by the Test Client facility is of the form
http://host:port/ejb-java-class-name/service-name-attribute-value as in:
<soap:address location="http://123.4.5.678:1234/S_CALCULATOR_Beanxxxxxx/S_CALCULATORserviceName" />
Is there a way to control the value of the context root portion of the URL, ejb-java-class-name in this case, either using annotations or deployment descriptor files?
thanks in advance for any replies,
octavio

Hi,
While building the WebService Application you can use the following ANT task...
<target name="build-service4">
<jwsc
srcdir="src"
destdir="output/TestEar">
<jws file="examples/webservices/jwsc/TestServiceImpl.java">
<WLHttpTransport contextPath ="TestContext" serviceUri="TestServiceUri" portName="TestServicePortHTTP"/>
</jws>
</jwsc>
</target>
Or if you are developing JAXRPC EJB based WebService in that case you can even define the Context root using *@weblogic.jws.WLHttpTransport* annotation....
@WLHttpTransport(contextPath="simple", serviceUri="SimpleService", portName="SimpleServicePort")
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Edited by: Jay SenSharma on Feb 4, 2010 10:22 PM

How to control ASM related parameter RBAL and ASMB

Hi,
I used RMAN to clone a database using rman's "duplicate target database" option. The prdn database's rcat backup on tapes were used. The restore progressed and eventually kept on failing several times.( We tried some options, like executed it when the tape activity was least, created a tempfile for another db in this db's diskgroup, etc.,etc., but all attempts failed. Not every attempt failed at the same stage ). At every failure I found in alert log the following message :
Wed Jul 19 15:36:19 2006
NOTE: ASMB process exiting due to lack of ASM file activity
Wed Jul 19 15:36:20 2006
Stopping background process RBAL
Wed Jul 19 15:37:59 2006
Starting background process ASMB
ASMB started with pid=16, OS id=4247
Starting background process RBAL
RBAL started with pid=17, OS id=4251
Wed Jul 19 15:38:05 2006
Errors in file /u03/app/oracle/admin/mydbname/bdump/mydbname_rbal_4251.trc:
ORA-00600: internal error code, arguments: [kfkLibVersionPreCb01], [], [], [], [], [], [], []
Wed Jul 19 15:38:05 2006
Errors in file /u03/app/oracle/admin/mydbname/bdump/mydbname_rbal_4251.trc:
ORA-00600: internal error code, arguments: [kfkLibVersionPreCb01], [], [], [], [], [], [], []
Wed Jul 19 15:38:05 2006
Errors in file /u03/app/oracle/admin/mydbname/udump/mydbname_ora_14773.trc:
ORA-07445: exception encountered: core dump [kfddsGet()+22] [SIGSEGV] [Address not mapped to object] [0x000000278] [] []
Wed Jul 19 15:38:05 2006
Trace dumping is performing id=[cdmp_20060719153805]
Wed Jul 19 15:39:02 2006
ERROR: diskgroup MYDBNAME_DG was not mounted
Wed Jul 19 15:43:51 2006
From the alert log message it is obvious that those two processes in subject RBAL and ASMB are getting stopped and while getting restarted it is throwing the ORA-600 error. There is hit on metalink for this ORA-600.
My question is, do we have a way to tell those processes not to stop at first place? If not how to get fix this issue.
Thanks in advance.
/KH

I have never seen this before, I think it a good candidate of having a SR with oracle.
There is hit on metalink for this ORA-600I think you mean There is NO hit on metalink...
I couldn't find any
Daljit Singh

MS 12.0.1: How to control inital location of value and refdes text?

Similar Messages

Maybe you are looking for