MS-5169 v. 2.1 and what update for CPU ?

Hi there,
I have a MS-5169 v. 2.1 with Bios AMI v. 3.1 (It used to be v. 2.2).
The CPU now is AMD K-2 333 MHz but I have a K-2 400 MHz in my drawer I would like to use !
Is it possible to update the M.B. v. 2.1 to use a K-2 400 MHz ?
The reason I ask is because the guide lines are a little confusing: There are the manuals and in the case of v. 2.1 it can only use up to K-2 350 MHz !!!
On the other hand when you look at the AMI BIOS history v. 2.7 includes use of K-2 400 MHz CPU and the one I have is v. 3.1 so that CPU support should be included ?
If the BIOS update qualifies the M.B. to use K-2 400 MHz, then there is the question of how the jumpers should be placed since the Manual for v. 2.1 does not deal with K-2 400 MHz CPU !!!
Any qualified idears from you ?
regards

I just tried the 400 MHz and it did not work out ! - when the boot came to 'personal settings' in Win XP it shuts down and boots up again !!
Any idear ?
I have done the following setup before boot:
Jumper JV1: I left as 'Dual Voltage CPU'.
I got this data from the AMD website:
AMD-K6.-2/400 2.2V 3.3V 100 MHz 4x
AMD-K6.-2/333 2.2V 3.3V 95 MHz 3.5x
Therefore I have only change the Bus Speed and the Clock multiplier:
Jumper S1:
333MHz 400MHz
no. 123456 no. 123456
000100 101000
Jumper S2: Has not been changed - that is no. 1234
1000
- for 2.2 Vcore
All according to the Manual v. 2.1
Have I forgotten to set something ? - or is there someting wrong with the CPU which becomes evident as the 'personal settings' starts in the boot process !!
PS: the PC works alright again with the 333MHz CPU and Win XP came with a message at first boot up, that the system has been recovered after a serious error !!!
regards
nUUK25
1=closed 0=open

Similar Messages

"A security and stability update for FF has bee n dnlded & is ready 2 B installed" Update: FF 37.0.2 but 37.0.1 is most recent. What to do????

Rcvd a Firefox "Software Update" which said: "A security and stability update for FF has been downloaded & is ready to be installed" Update: FF 37.0.2
Message has the option to restart now or later. I'm on ver 37.0.1 and FF says it is the MOST RECENT! Is this safe (from Mozilla) or a Scam/Phishing attempt? What to do????

There is a 37.0.2 that came out recently. If you don't trust the installation prompt, cancel it. You can check using the Help menu, About Firefox. Either:
* "3-bar" menu button > "?" button > About Firefox
* (menu bar) Help > About Firefox

Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

I have an icon thats appeared in finder ..i don't know where its come from and what its for. It doesn't respond in any way when I click it.How do I get rid of it?

I have an icon thats appeared in finder ..i don't know where its come from and what its for. It doesn't respond in any way when I click it.How do I get rid of it?

I can't select it .. I click on it and nothing happens. The only thing I seem to be able to do is a two fingered click which brings up a context menu for the side bar preferences..but unfortunately this icon does not appear in the list.

Resumable downloads and delta updates for App Store

Hi all,
since I didn't find any place where to add product improvement suggestions, I post it here and hopefully someone can point me (and or this post) to the correct location.
I'd like to vote for resumable downloads (even a shutdown is in between) and delta updates for the Mac App Store. The main reason for this are big apps (i. e. Xcode) which I simply can't update without having the mac running the whole day (and night).
Thanks and regards,
Michael

Hi Michael!
Apple employees are not going to see feature feedback posted here, but you can use the Apple Feedbck site. There is not currently a category for the App Store but you can use the OSX feedback form here:
http://www.apple.com/feedback/macosx.html
The main reason for this are big apps (i. e. Xcode) which I simply can't update without having the mac running the whole day (and night).
Curious, are you on dial-up or satellite? As I live in a low-population state with lots of miles between towns of even modest size, I hear the slow connection issue a lot when helping users locally. We get 50mbps service in Lewiston, but people in the back country are struggling with some really slow satellite providers.

Just downloaded latest update and saw updates for fingerprint scanners. Do I have a fingerprint scanner or where do I get one?

Just downloaded latest update and saw updates for fingerprint scanners. Do I have a fingerprint scanner or where do I get one?

If you have an I phone 5s you have a scanner. It does not exist on any other device at this point, and cannot be added.

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
Can anyone help me? Anyone with the same issue?

Update: I was able to test out the HDMI adapter as well and the same issue occured. I'm stumped. 10.8.1 maybe.

Software and firmware updates for the Zen Vision M 30 gb.

On the Creative support homepage I can find the software and firmware updates for the Zen Vision M 60 gb, however, there is nothing listed for the 30 gb unit. Where can I find the software and firmware updates (downloads) for the 30 gb unit's

http://support.creative.com/Products...me=MP3+Players

I keep getting a message that reads Introduction: A security and stability update for Firefox is available - 3.6.15 and when I click to update it can't connect to the server. What's wrong?

I'm using Mac OS X version 10.6.6. The message strongly recommends that I apply this update for Firefox as soon as possible but when I click Update Firefox, it seems to try and update but never really gets started.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Microsoft and Adobe Updates for April

Microsoft Updates
4 Critical
Microsoft Security Bulletin MS15-032
Cumulative Security Update for Internet Explorer (3038314)
»technet.microsoft.com/library/se ··· ms15-032
Microsoft Security Bulletin MS15-033
Vulnerabilities in Microsoft Office Could Allow Remote Code Execution (3048019)
»technet.microsoft.com/library/se ··· ms15-033
Microsoft Security Bulletin MS15-034
Vulnerability in HTTP.sys Could Allow Remote Code Execution (3042553)
»technet.microsoft.com/library/se ··· ms15-034
Microsoft Security Bulletin MS15-035
Vulnerability in Microsoft Graphics Component Could Allow Remote Code Execution (3046306)
»technet.microsoft.com/library/se ··· ms15-035
7 Important
Microsoft Security Bulletin MS15-036
Vulnerabilities in Microsoft SharePoint Server Could Allow Elevation of Privilege (3052044)
»technet.microsoft.com/library/se ··· ms15-036
Microsoft Security Bulletin MS15-037
Vulnerability in Windows Task Scheduler Could Allow Elevation of Privilege (3046269)
»technet.microsoft.com/library/se ··· ms15-037
Microsoft Security Bulletin MS15-038
Vulnerabilities in Microsoft Windows Could Allow Elevation of Privilege (3049576)
»technet.microsoft.com/library/se ··· ms15-038
Microsoft Security Bulletin MS15-039
Vulnerability in XML Core Services Could Allow Security Feature Bypass (3046482)
»technet.microsoft.com/library/se ··· ms15-039
Microsoft Security Bulletin MS15-040
Vulnerability in Active Directory Federation Services Could Allow Information Disclosure (3045711)
»technet.microsoft.com/library/se ··· ms15-040
Microsoft Security Bulletin MS15-041
Vulnerability in .NET Framework Could Allow Information Disclosure (3048010)
»technet.microsoft.com/library/se ··· ms15-041
*Note: For anyone who has had issues with .NET Framework updates, it is suggested that MS-041 be installed separately with a shut/down restart between other updates.
Microsoft Security Bulletin MS15-042
Vulnerability in Windows Hyper-V Could Allow Denial of Service (3047234)
»technet.microsoft.com/library/se ··· ms15-042
Microsoft Malicious Software Removal Tool (MSRT) -- Microsoft has released an updated MSRT as well
(version 5.23).
==============================================================
Adobe Updates
Adobe Flash 17.0.0.169
For Windows 7 and earlier:
Internet Explorer - http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_17_active_...
Plugin-based browsers (Firefox etc) - http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_17_plugin....
Adobe AIR 17.0.0.144
https://get.adobe.com/air/
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

There is delayed update KB3049508 of Flash Player for IE released today. It fixes zero day vulnerability.

What brand DVD+R do you recomend and what speed for PE11?

I do not know why some brands like Memorex work with my PE11 and others like Sony do not. I do not know what speed 8X the program can handle? What are the pros and cons of using different speeds on results?
Thanks
Rich

Rich
Thanks for the follow up.
As for
What kind of disc can I record on today and then add to it tomorrow with some additional footage?
You cannot do that with any burn to in Premiere Elements (any version).
In Premiere Elements....
1. The DVD-R allows for one burn to on the disc all at one time.
2. The DVD-RW will allow you to use the disc again after a Premiere Elements burn to to it, but it will overwrite (erase) what was burned
to the disc in the prior session. No add on.
If you are in the Elements Organizer 11 and using one of its burn to data disc opportunities (See File Menu/"Copy/Move to Removalble Disc"), you could explore the multisession possibility by enabling the preference for multisession. (See Edit Menu/Preferences/Files and the option for "Enable Multisession Burning to CD/DVD.)
I would suggest that you look into the Premiere Elements Project Archiver feature where the project file (project.prel) is saved with its source media. This might be a consideration for add on chances.
Adobe Premiere Elements 11 * Archiving projects
ATR Premiere Elements Troubleshooting: PE12: Archiving Projects With Disc Menus
A Google search reveals at least one disc manufacturer marketing a "Archival Grade Gold DVD-R" expected to last 100 years.
But, I wonder what the technology would be like in 100 years and if a player will still exist to play back DVD-VIDEO on DVD disc.
Please review and consider. If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Which Build and what drives for a raid? One for Harm Maybe :)

Hi, I've been waiting to get an evga sr-2 but they are so hard to get a hold of at the moment I was starting to wonder whether I should go for something like this in the meantime. http://www.overclockers.co.uk/showproduct.php?prodid=BU-031-OB
I always wait longer and do big upgrades instead so am willing to wait another month if necessary to get my hands on an sr-2 but was looking at Harms Beast spec on the premiere pro benchmarks and noticed he gets pretty impressive results from a single i7
Just wondering if overclocked sr-2 running at 4.2Ghzplus is worth twice the money.
Also, No matter which board i end up with the first step will be using their onboard raid to run a raid 5 array with 6 discs. (they don't do raid 3)
Eventually I plan to get an areca card but don't know what drives to use. WD Re4's (2Tb) seem to be pretty good for raid and critical use for at £200 they are a lot more than WD blacks. Just wondering what to do for as it's alot of money especially if I decide to get an areca card and use raid 30?
Thanks, Michael.

Michael,
As you can see, Chris' top rank in the PPBM5 Benchmark reflects the enormous power of dual X5680's. Admitted, it is much more expensive than a similarly overclocked single i7-980X, like Studio North. However there is a distinct advantage of a dual Xeon system, in the sense that you will have 12 DIMM slots and can easily use the very affordable 2 GB sticks to get 24 GB, which saves a lot in comparison to 6 x 4GB sticks on a X58 mobo. Or you can expand memory to 48 GB should you desire so.
You may have seen this review already, but in case you missed it, look here: http://www.bit-tech.net/hardware/motherboards/2010/08/17/evga-classified-sr-2-review/1
If you consider that there will be further improvements in multi-threading and in some exporter modules in CS Next, the advantage of more cores and more memory will probably increase over a 980X.
As for disks, the WD RE4's are a great choice. Depending on your storage requirements, and your timing for an Areca controller, it may make sense to start with the 1 TB version or the 1.5 TB version and then later add another 6 x 1 TB or 6 x 1.5 TB. That will give you a 12 disk array with the same gross capacity as 6 x 2 TB for approximately the same amount, but because of the larger array will give you better performance or in the case of 1.5 TB models even more storage capacity. I would advise against the Caviar Blacks because of the TLER issue.
Planning ahead for the Areca, you have to keep in mind a way to transfer your data from a mobo array to an Areca array. You may have to first create a new 6 disk array on the Areca, copy your data from the mobo array to the new Areca array, then move one disk at a time from the mobo to the Areca and define it first as a hot-spare and then expand the array. You have to do that for all the existing disks, but that way you have no problems in getting all your data on the new array intact. I probably would use a Raid3 or Raid5 with one hot-spare, so you end up with 11 x Raid3/5 plus one hot-spare, or a 12 x Raid6.
Hope this helps.

HT4991 Using keynote and stop updating for now

I have an IPAD 2 and tried updating the keynote on a wi fi connection but had to leave and now i can' t use the keynote till i get a wifi connection once again
And i need to use the keynote now and it says waiting and i can't open it or use it, how can i stop the waiting of downloading and resume later

Before you do any of the resets below try this first.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
Here are the descriptions for the different reset settings:
Resetting iPad Reset all settings: Choose General > Reset, then tap Reset All Settings. All your preferences and settings are reset. Information, such as your contacts and calendars, and media, such as your songs and videos, aren't deleted.
Erase all content and settings: Choose General > Reset, then tap “Erase All Content and Settings.” This resets all settings to their original values and erases all your information and media.
Reset network settings: Choose General > Reset, then tap Reset Network Settings. When you reset network settings, your list of previously used networks and VPN settings not installed by a configuration profile are removed. Wi-Fi is turned off and then back on, disconnecting you from any network you're on. The Wi-Fi and “Ask to Join Networks” settings remain turned on. To remove VPN settings installed by a configuration profile, choose Settings > General > Profile, then select the profile and tap Remove.
Reset the keyboard dictionary: Choose General > Reset, then tap Reset Keyboard Dictionary. You add words to the keyboard dictionary by rejecting words iPad suggests as you type. Tap a word to reject the correction and add the word to the keyboard dictionary. Resetting the keyboard dictionary erases all words you've added.
Reset the Home screen layout: Choose General > Reset, then tap Reset Home Screen Layout.
Reset the location warnings: Choose General > Reset, then tap Reset Location Warnings.
Message was edited by: David M Brewer

MS-5169 v. 2.1 and what update for CPU ?

Similar Messages

Maybe you are looking for