MS-6167 problem with Win 2000 and Winxp

Guys, I am having a problem. After I have installed Win2000 or Winxp Pro( first time boot, it pop blue screen with the msg systemroot\system\ntxxx.dll..I have to turn off and and turn on computer, it let me to boot up.) After that, when I restart the computer it boot up with blue screen(Sometimes, it let me boot up without any problem). I didn't install any third party software(OS only). It's weird. Even though, I have installed FAT file system and the result is the same. I have tested windows 98. It's very stable and no problem at all.Here is my PC configuration
AMD 950
MS-6167
Creative TNT2 Ultra 32MB(AGP)
Sound Blaster Live
Sony DVD ROM
External Modem.
Other than that, I build another PC for my fren here is the configuration
AMD 1.7 XP
MSI KT3 ULTRA
Winxp Pro
Any clue? Do I need to update bios? But I can't find MS-6167 model bios. How come it's doesn't support win2000 and win xp? I got another PC AMD 1.1 Thunderbird with ASUS A7V. I don't have any problem that I mentioned above when I installed 98,win2000 and winxp pro(Separately not dual boot). Appreciate !!!!
Guanyu

heres what i found for another guylink

Similar Messages

Communication problem with FP-2000 and Labview 7.1

I am using the FP-2000, DO-403 and TC-120 modules with Labview 7.1, being run on a host computer via an ethernet connection. The setup has operated flawlessly for ~2 years; recently, I have noticed that while a VI is running on my PC, connection to the FP module ceases. There is no pop-up "connection error" in my VI, and the all the power and status LEDs on the FP modules are normal. I can still interact with the VI on the front panel while it is running, but nothing is passed to the FP module. I have tried communicating with MAX when this occurs and receive a "no connection" message. Is there a simple solution here, such as rebooting the FP module? Or is it time to invest in new hardware?
Justin

I am having a very similar problem with my cFP-1804 and Labview 7.0. I have no problem initiating communication over ethernet, and the vi will run perfectly for hours or even days. Inevitably, however, at some point there is no longer communication with the cFP-1804. Data is no longer being passed either to or from the cFP-1804, and MAX will show that the device is not connected. I also will not see any pop-up error message that says the connection has been lost, either from Windows or from Labview. The vi will just continue to run as if nothing has happened. Turning the power to the cFP-1804 off and then on will always resolve this problem. Since I am using the cFP-1804 primarily for data logging, however, this behavior is particularly problematic as the system will record nothing but zeroes until I discover that the communication has been severed and perform the manual power cycling.
I have been unable thus far to determine the cause of this problem. Any help would be greatly appreciated.
Thanks,
Derrick

Problem with Wine, NVidia and fullscreen games

Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073

Report generation toolkit problem with office 2000 and office XP

Hello, I am having a problem with running my vi after it is compiled with application builder. The dev machine is an XP box and the targer is windows 2000. I included _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi from the office 2000 section of the install cd (for the report toolkit) in the compile but did not include those files for XP. When I run the application on the target machine (2000), the reporting functions call Excel just fine and the program does not come up with any errors. The program however, is not loading the approprate template and inserting the approprate data. Did I leave some neccessary files out of the compile? Thanks in advance!
Greg
Gregory Osenbach, CLA
Fluke

Hi Acer,
The recommended procedure in your case is to install Microsoft Office 2000 on the development machine and then reinstall the LabVIEW Report Generation Toolkit. When the toolkit is installed, it will check for the current version of Office and install the corresponding VIs to support it. The VIs include different ActiveX calls according to the version of Office. Therefore it is not enough to change the support manually without having the correct version of Office installed first.
However, I would recommend that you just try to run your executable on a machine that has Office 2000 installed. The difference in the ActiveX API for Office XP and 2000 is not that significant, so your application might work perfectly on an Office 2000 machine. If you try to run the executable on a machine with Office 97 installed I'm willing to bet my right arm that you will experience errors.
Good luck Acer!
- Philip Courtois, Thinkbot Solutions

Partition problem with Win 7 and Lion

I have a 2011 Mac Mini with two hard drives - the original 500GB drive and a SSD.   The SSD is laid out as follows:
$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *60.0 GB    disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS OSX Lion SSD            19.0 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP W7             40.2 GB    disk0s4
It has my two bootable operating systems and works fine (for now) so I am happy to leave it alone.
The problem is with the second drive. It has:
1) EFI partition 200M
2) Original Lion install 40G HFS+
3) Original recovery partition 650M
4) Space set aside for OSX HFS+ 160G (has some big files in it)
5) Space set aside for Windows NTFS 300G (no files in it yet)
I think there is a problem with MBR vs GPT and Disk Utility vs Disk Management.
Disk Utility or fdisk calls it
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:       Microsoft Basic Data                         37.6 GB    disk1s2 (these entries are wrong)
   3:       Microsoft Basic Data                         650.0 MB   disk1s3
   4:       Microsoft Basic Data                         161.5 GB   disk1s4
   5:       Microsoft Basic Data NTFS stuff              300.1 GB   disk1s5 (this entry seems right)
and I cannot access the partitions in Lion.
Gdisk calls it:
GPT fdisk (gdisk) version 0.8.1
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Disk /dev/disk1: 976773168 sectors, 465.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 0000303E-4D40-0000-1B4C-0000F9090000
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 8-sector boundaries
Total free space is 2061 sectors (1.0 MiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI system partition
   2          409640        73900919   35.0 GiB    0700 Customer (name is wrong)
   3        73900920        75170455   619.9 MiB   0700 Recovery HD
   4        75170456       390588423   150.4 GiB   0700 stuff
   5       390590464       976773119   279.5 GiB   0700 Basic data partition (name is wrong)
Windows Disk Management is happy to see inside the HFS partitions, so I know all my files are at least still there. I had a 5th NTFS partition formatted, but upon going into Lion and back, it disappeared.
I think ideally what I would like to have is a spare Lion + recovery partition on this drive in case my SSD barfs, then a big NTFS partition to hold my Windows files. I guess merging the 40G OSX and 160G HFS+ partitions will be ok. Could the problem be related to MBR having a limit of 4 partitions? There isn't any data on this drive that isn't backed up, but I would rather do this partition fixing shuffle without having to restore big files. Any suggestions on how to proceed?

I managed to fix the problem. First I used Disk Utility to delete the NTFS partition. It hung during the process, so I quit it, and the partition was deleted anyway. Next, I used gdisk to change the partition type from 0700 to AF00 and AB00 for the Lion and Recovery partitions respectively. It worked and I can access the partitions under OSX again. Thanks, everybody, you've been super helpful.

Problems with win vista and an AX to AX extended network

Hi, I'm wondering if someone can help me out with a problem I'm having. I have a house with several floors and had patchy coverage from the Airport Express unit serving as a base station, at least down in the basement where my desktop is located. I decided to put a 2nd Airport Express unit halfway between, and choose to extend the network (using the Extend a Wireless Network option from the dropdown box, rather than WDS). For some reason, my pc won't connect properly to the 2nd AX, I get an IP address assigned, but can't ping anything. When I check the log, I see these entries for the mac address of the desktop:
Apr 25 14:18:18 5 Associated with station 00:1c:10:e4:05:7c
Apr 25 14:18:22 5 Deauthenticating with station 00:1c:10:e4:05:7c (reserved 2).
Apr 25 14:18:22 5 Disassociated with station 00:1c:10:e4:05:7c
Curiously, I have a laptop that works just fine, and I can confirm that it's connected to the extending station using the AirPort utility by seeing the wireless clients attached.
On several occasions I have managed to get the desktop to the base upstairs (in spite of the patchy reception) and reception permitting, it works ok. Very strange!
Other info:
my setup is adsl+ > thomson modem/router (from the isp, O2) > airport express base station (via ethernet cable) > airport express extending station
the desktop uses a linksys wireless g pci adapter, latest driver downloaded
the laptop is a sony vaio running vista business, the desktop vista ultimate
I am using WPA/WPA2 PERSONAL with AES encryption.
I have an integrated modem / router from my ISP that acts as a dhcp server and is connected to the AX base station via an ethernet cable.
My iphone also connects to the AX extending station
The AX base station is broadcasting 802.11n (b/g compatible mode)
Am I stretching the windows compatibility with this setup?

Sounds like it should work to me. I run the following for a network: AExt Dual Band on 2.4 & % Ghz, AExp as extender on 2.4 Ghz, AExp on 5 Ghz as extender, an HP Notebook with Vista 32 connects on 2.4 Ghz, Older IBM Notebook runs XP connects on 2.4 GHz, a new DELL Intel Quad running Vista 64 connects on 5 Ghz. It all works without problems.
I did have some connecting issues when I was using Norton 360 release 2.something. I upgraded to version 3, free with active subscription, and all issues have seemed to go away. Release 3 seems to be much more Apple aware.
Would encourage you to call Apple Support. When I called, I found them to be pretty knowledgeable and they actually speak US English as their native language.
Another tip, if you go to "Network & Sharing Center", you can see signal strength. I found this useful to tell where a particular system was connecting.
Hope this helps, Good Luck!

Ugh CCP problems with win 8 and IE9

Everytime i start CCP with WIN 8 i start as an admin, it shows up but the bottom of the page is white with the main GUI a small box, and its not discovering anything with gns3 i have connectivity and have configured the router and loopback and everything. Has anyone ran into this and have a fix?

There was a post last month with a sugggested work around.
I haven't had a Win 8 machine to try it on yet but here's the link for you to check it out:
https://supportforums.cisco.com/message/3791771#3791771

Problem with Win 7 and x205-S7483

Hello!
I have Win 7 for a few weeks.
My Satellite x205-s7483 constantly freezes at viewing of video and Internet surfing. I can't do anything on my notebook during this time. This situation continues for a few minutes. With video this problem returns in 7-10 minutes. Help me, please.
Sorry for my very-very bad English. In my country nobody have this problem and I want to get your recommendation.
Thank you!

Satellite X205-S7483
Video only on the Internet? Or video off the hard drive too?
-Jerry

Tomcat Problem with Win 2000 Professional

I am using Tomcat 5.028 as the servlet container. But it seems Tomcat5.0 is not working very compitable with win2000.
After I change the config file "server.xml" and "web.xml", and restart Tomcat services in My Computer Manager, the page "http://localhost:8080" keeps telling error message as:
The requested resource (/) is not available.
But I don't have this problem in XP when I reboot my Tomcat service.
Can anyone tell me how to solve this problem?

I am using Tomcat 5.0.27 and it is working perfectly. perhaps check the stdout.log to see what errors are thrown while starting the tomcat. Check the port also

Problem EP7 with Win 2000

Hi experts,
Almost end users portal have OS win 2000 and IE 6. When those users are logged in into ep7, the system shows the following error EPCM is undefined. That only happened with users in win2000 because in winXP all works fine.
Please help me

Hi Nelson,
I had same problem like "EPCM is undefined". I applied the solution given in the link above but it did not work then i found another solution for that problem.Just download the registry file in below and run it then restart your pc and try run portal again on the computers which have problem .
<a href="http://www.fiddlertool.com/dl/IE6SP2.reg">Download</a>
Regards,

Problem with Win 7 x64, WWAN or WiFi card and Windows XP Mode

I have a T500 with switchable graphics (2056-4RU) with a clean install of Windows 7 Pro x64 with the AT&T WWAN card.
With all the Win7 RTM drivers and Access Connections for Win7, I had a problem that the WWAN card (Ericson F3507g, purchased from Lenovo and working flawlessly under Vista 32-bit) would not initialize. Support told me to uninstall the Win 7 versions of the Power Manager Drivers, WWAN card driver and Access Connections and replace them with the Vista counterparts, which restored the functionality of my WWAN card. Based on the speed with which the support tech came up with the suggested fix, I suspect I am not the only one with the disappearing WWAN card problem.
Now I have found that starting the Windows XP Mode virtual machine kills the WiFi functionality (Intel WiFi Link 5100 AGN) until I disable and re-enable the WiFi adapter in Device Manager and then restart the system. (I have not problems with XP Mode and with the Win7 drivers / Access Connections opening Windows XP Mode did not cause the problem with the WiFi.) Opening Windows XP Mode causes no problem with the wired network adapter on my system).
Thus it appears that I can have functionality of the WWAN and WiFi adapters with XP Mode using the Released Win 7 versions and functionality of Windows XP Mode together OR I can have WWAN but not WiFi functionality with XP Mode using the Vista drivers that support suggested. However, it seems that I cannot have WWAN, WiFi and XP Mode concurrently.
I reproduced the above XP mode / WWAN problem / WiFi problems on a T500 with Win7 x64 owned by another family member.
Does anyone (particularly anyone from Lenovo) have fix for this?
Thanks.

for the sim card, try this:
http://jack.ukleja.com/update-ericsson-f3507g-mobile-broadband-on-windows-7-with-lenovo-thinkpad/com...
I have another operator and I finally gave up. apparently it's also no that easy to install the SIM card, if the plastic thing that helps to remove the SIM card is not the right position, it will overlap the SIM Card chip.
can't help for the WIFI. I had the problems too with access connection and decided to remove it. I use Seven's network manager, which does an equally good job.
Since I have the switch to turn off the wireless, I don't really need access connection anyway.
Finally, something that I learns while struggling with the bluetooth driver: the order in which power manager, access connection and the different drivers are installed DOES affect their effectiveness. I forgot the details but I remember 2 things:
always read the TXT file that is available on the driver page on the lenovo web site and install power manager and access connection last.
Good luck

SQLSERVER7 connection problem on WIN 2000

Hello-
Any help at all on this problem would be greatly appreciated. I'm running MSSqlServer 7.0 Desktop Version (with service pack 3) on Win 2000 and I get the follwing error when trying to connect to the db:
[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
The DataDirect driver is loading fine. My code is fine (in fact DataDirect has their own code I can use to test their driver and I get this same exception).
Any ideas? Is there a JDBC issue with the desktop version of SqlServer7 or is this a Win 2000 issue?
Thanks ahead of time!
John

SQL Server can be configured to use named pipes, TCP/IP and a number of other protocols. Probably your server does not enable TCP/IP (all type 4 JDBC drivers for SQL Server use TCP/IP, I know this since I'm developing one -- jTDS, http://jtds.sourceforge.net).
You can configure SQL Server to use TCP/IP using the SQL Server Network Utility. It's quite intuitive, you'll see.
And, by the way, you can give jTDS a try. :o)
Alin.

Ipod nano possible with win 2000???

my wife just got an ipod nano \(3rr gen) for her bday, and we have a computer with win 2000. now the only itunes we can find for win 2000 is ver. 7.3. when i downloaded this it tells me that i need ver. 7.4 or better. anyone got any info or tips for me... PLEASE

NO. That is NOT what the website says. When you go to the 732 for Windows 2000 d/l page, it clearly states you can use Win2k. The website says "iTunes is the best way to enjoy your digital music and video with your PC, iPod and Apple TV. iTunes 7.3.2 for Windows 2000 is designed to work with Windows 2000 Service Pack 4 or later. To use iTunes with Windows XP or Windows Vista, visit http://www.apple.com/itunes/download/ to download the latest version. Use iTunes to import CDs or download songs and videos from the iTunes Store. Make playlists perfect for any occasion. Burn playlists to CDs and play them on your home stereo. Sync your media with iPod to enjoy it on the go, or play your collection on your TV with Apple TV."
Why have so many missed this??? Apple is clearly stating they support Win2k - including sync to ipod. I so got one. I d/l the iTunes 732 for Win2k and it works fine - to play music (using it right now). But once I connect my new nano, I get the error message "The iPod 'IPOD' cannot be used because it requires iTunes version 7.4 or later. Go to www.blah blah to d/l v7.4..." So.... what now??? I'm stumped. And never-mind the "win2k is old and nobody supports it..." stuff... Microsoft still offers SP4 for d/l.
Why would Apple put a utility in a backward compat. program that is not backward compatible?????
In addition (and this may be over my head), but why does the website show the file @ 47.7MB, put once on my hd it shows 37.9MB?? I've d/l the file twice to be sure but have the same result.
Please forgive me - I am not shooting the messenger, I'm terribly confused. I am clearly missing something. Would someone PLEASE set me straight??? I'm a big boy - I can take it.

I get a message "could not initalize scratch disk full" I hae a new computer with Win 8 and I am installing PS 7

I get a message "could not initalize scratch disk full" I have a new computer with Win 8 and I am installing PS 7. how can I fix the scratch disk problem? Thank you for the help.

Are you saying that the Installation failed, or that Photoshop has installed but won't open?
You say Photoshop PS7. Is that a typo, or do you really mean the version that was released in 2002 and that preceded Photoshop CS?
http://en.wikipedia.org/wiki/Adobe_Photoshop_version_history#7.0
If you do indeed mean PS7, then I am afraid that is not compatible with Windows 8.1
Windows Compatibility Center

Problem with premiere pro and encore with win7 enterprise 64-bit.

We are a college with approx 500 pc's running win7 enterprise 64-bit. Premiere pro and Encore will only open with admin login, not user login. All other packages ok. Any suggestions as to why this is?

Our lab has just had CS6 installed on it, running Win 7 enterprise. A user account will open a Premiere Pro project. I've done it. That was only to check that everything worked ok. I edited a couple of clips and stuck them on a sequence (16:9 PAL DV) and it played them ok and the project was saved back to the USB hard drive OK.
I have also opened up encore, made a new project and saved it to the USB HDD. No assets were added to it, just checking that the preference files had copied from the central server to the machine, so that users have certain options already pre-selected.
What exactly are the problems with Win 7 enterprise?
Andrew

MS-6167 problem with Win 2000 and Winxp

Similar Messages

Maybe you are looking for