MS-6309 V2.x problems with ATI-All in Wonder Pro AGP 2.X

I have a MS-6309 V2.x and are trying to have my ATI-All in Wonder Pro AGP 2.X working on this Mainboard ! The computer crash after loging and restarts imediately ! this repeats to the invinity ! I have the latest bios update ! Some one with the same problem please tell me about your work arround !

Ok ! I have figured out the problem largely because of your aid on this forum ! Thanks to all !
The problem is the compatibility with the CPU's !!!
Well here are all the information found on the CPU's
I have a : Pentium III costa rica
850/256/100/1.7v
3045A586-1116 SL4CC
The Pentium III is the big problem It crash all the time on all systems !
and a : Celeron
900/128/100/1.75v
Q151A233-0248 SL5LX
The celeron crash when it whant's on Windows and crash from time to time when I use certain Software on Linux system
One question does your Bios Upgrades include the microcode for these CPU or is it the Operating system (Under Windows) update.sys that does the updates !
It's not the ram responsible for the crashes but the CPU'S !

Similar Messages

K8MM-ILSR PROBLEM with ATI Radeon 9550 of 256MB AGP port 8X...

Hello, I have a motherboard MSI-K8MM-ILSR, when use the onboard video card works correctly, but the problem begins when I install a ATI Radeon 9550 of 256MB, is AGP port 8X and has its dissipator, in other machines it works well and your temperature is ok. My monitor is Samsung Sync Master 793s at 75 Hz. The Problem is the following: the machine crash and the video is distorted and it is congealed, this happens after playing a little, the video card drivers are updated (Catalyst 5,6), I'm use Windows XP Service Pack 1, Thanks... and excuse me my English...

Some other options you can try:
- uninstall the previous vid-drivers and use driver cleaner software to uninstall everything
- disable onboard video in the BIOS;
- set fastwrite to disabled/no (if it's there)
- set AGP Aperture Size to 128 (if it doesn't do anything, go to 64);
- set AGP port to 4x.
- Start hoping .... good luck!
(BTW, the last two options may cause your system to operate slightly slower, but it's hardly worth mentioning ... )

KT4AV-L / ATI All-In-Wonder 9200 Problems

Hi All,
A few months back I purchased an ATI All-In-Wonder 9200 AGP video card for my system. I had a flawless installation of this card and it worked fine until about 2 days ago when, all of a sudden, it stopped working. Keep in mind, this is part of a dual monitor system -- I also have an old ATI XPERT 128 running on the PCI bus to support a second monitor.
So, I opened the case, took the card out, re-inserted it. Problem still continues, this card will not work. Windows reports it as a CODE 12 error in my hardware profile, saying that the card doesn't have enough resources to start.
The really weird thing is that this probelm sees to be feeding of of each other on the two different video cards. With just the 9200 installed, D-Bracket reports a red light on LED #1 and will not post... if it's just the XPERT, it shows red on 2 and 4 and will not post... but with both cards in the system, I get functionality out of just the XPERT, system posts, and runs like normal, but only the XPERT will work. These cards do work separately in my old MB.
Power supply specs are as follows (although I am about 99% sure this has nothing to do with my problem):
ANTEC P4 ATX12V rated as 3.3-28 5-38 12-16
Other info as follows:
MSI KT4AV-L MB
256MB Centon DDR2700
ATI All-In-Wonder 9200 AGP 4x 128mb
ATI XPERT 128 PCI 16mb
(no other add-on cards)
Any input on this would be greatly appreciated, I'm pulling my hair out over this.
Thanks!

Sorry, I'll clarify... the cards do work separately in my old mobo, I can plug in either one and get normal post and boot... neither card works on its own in the KT4AV. If I plug in both cards I get output on the XPERT only, but the XPERT won't work without the AIW on the KT4AV. The AIW won't function at all on the new mobo, either as a single video card or with both plugged in.
And what I mean by no other add-ons, I mean no other cards. I'll post a full system configuration:
KT4AV-L Mobo
AMD Athlon XP 2200+
256 MB Centon DDR2700 RAM
Maxtor 2B020H1 20 Meg HD
LG 16x10x40 CD-RW
Generic 45x CDROM
ATI AIW 9200 AGP Video
ATI XPERT 128 PCI Video
ANTEC P4 ATX12V 400 Watt
Rated: 3.3@28A, 5@38A, 12@16A
I did try unplugging my CD drives the other day to see if it would make a difference and it didn't change anything. It seems to me that it could be a GART issue but I'm not sure since I don't know too much about how that works. I don't do any gaming on this machine, I've had it configured up for home recording studio use, hence why the two monitors comes in handy.

Has anyone used an ATI All in Wonder 128 Pro with the 845E Max? Are they compatible?

I have an 845 E Max and an old ATI All In Wonder Pro 128. The ATI is a Rage Pro 128 with a Universal Connector Type and AGP Spec of 2X. MSI says it will work, but I fear conflicts with a vid card that has 3.3v spec for a 1X.
Anyone have any advice?
Anyone have any recommended power supplies for the 845E Max?

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=313
Support AGP 4x slot (1.5V only)
i would say you cannotr use it based on what you have said

Problems with ATI Radeon HD 2600, electrical interference or flickering pix

Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
Monitor works fine on two other computers, driver is up to date.
Would like to upgrade at some point just disappointed that I’m already having problems.
Any suggestions would be very helpful, in the mean time I’ll searching the forums.
Thanks,

When you called Applecare or went to a Genius bar were they of no help?

Xorg7 Problem with ATI driver?

After upgrade my X sever crash :cry:
I see a error message saying something like this:
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(WW) ****INVALID IO ALLOCATION**** b: 0x3000 e: 0x30ff correcting
(II) window:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
[0] -1 0 0x00000000 - 0xffffffff (0x0) IX[B]
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
Requesting insufficient memory window!: start: 0x0 end: 0xffff size 0xd0220100
(EE) Cannot find a replacement memory range
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd02100ff (0x100) MX[B]
This is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "xtrap"
Load "glx"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "STN"
ModelName "S/T 77E/76E"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:4:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

I hada problem with ATI in my xorg 7 and my solution was to change the xorg.conf driver to ...vesa.
I don't know if your card supports fglrx but I suspect it may not and the ati-drivers are for that function.
Just a thought...

Problems with ATI drivers and gnome3?

I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

Problem with ati radeon in 4530s

hi ....i have problem with ati radeon graphic in hp 4530s ....
when i install graphic driver apear black screen and i dont see anything ....
i change windows and load that properly but when install graphic driver black screen apear again..
driver download is corectly i download driver from hp this problom is not from driver..but i dont what's problem
Please Help Me....Thnx
Sorry my english language is weak...:manvery

Nimestä päätellen oletan että oot varmaan suomesta
Eli suomeksi sanottuna osnavi sanoo että ongelma voi johtua liian heikkotehoisesta virtalähteestä, sitä ei voi säätää tehokkaammaksi mistään biosista vaan jos se on alitehoinen pitää hommata uusi tehokkaampi virtalähde. Eli nuo arvot löytyy todennäköisesti sen virtalähteen kupeessa olevasta tarrasta. Se 12 volttia pitäisi olla vähintään 12 amppeeria että se riittäisi kunnolla radeonin näytönohjaimelle. Yleensä 300 wattinen poweri on riittävä, eli siinä tarrassa pitäisi olla maininta ainakin siitä kokonaistehosta, esim total output 300w tai jotain vastaavaa. Vika voi aivan hyvin olla jossain muuallakin, mutta yleensä täällä aina ensimmäiseksi syylliseksi arvellaan virtalähdettä, itselläni kyllä toisessa koneessa radeon 9200se näytönohjain toimii vaikka virtalähde on vain 200 wattinen. Niin ja muuten... eikö olisi helpompaa kysyä neuvoa ensin joltain suomenkieliseltä sivustolta

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

No sound using ATI all in wonder Multimedia Cen

I am having a problem with sound, When using ATI's Multimedia Center version 9.2, and an Audigy 2 sound card, I do not get any sound when I use the video capture capabilities. The manual statues that I should use "line In" as the default audio source, but "Line In' does not come up on the drop down list. Sound works for everything else, just not MMC.

Jeremy, the ATI support says there is an incompatibility between Audigy and All in Wonder cards. It has a link to the creative labs web site and mentions that there is a custom driver that rectifies this problem. it mentions getting driver 250 or higher.
Can you let me know what the part number is for the driver mentioned in this section?
This the section from their website
Using the ATI ALL-IN-WONDER? with Creative's Audigy family of Cards The Creative Lab's Audigy family of sound cards has architectural differences from earlier SoundBlaster products in order to provide enhanced audio quality. These changes have an impact on how the ATI Multimedia Center? works when an ATI ALL-IN-WONDER? is used with an Audigy card. To partially address these issues, Creative has made available a special version of their drivers, which allows the ATI Multimedia Center? to function correctly. These drivers are version 250 (or later) of the Audigy drivers. Please make sure you are using the correct drivers.

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

MS-6309 V2.x problems with ATI-All in Wonder Pro AGP 2.X

Similar Messages

Maybe you are looking for