Ms 6378 ver 3.0 or what / lock up Athlon XP 1800

 :O
I too have a MS-6378 notherboard. Version 3.0. I am running a Athlon 1800 XP with 256 MB ram. I have a problem that my computer lockup everyonce in a while. Sometimes I could be surfing the net or the next just typing a letter on word. I know I can not play any games because that is a automatic lock up. I tried to uninstall the on board graphics and install my Nvida TNT 64 Pro. No way computer lock up on boot up. For those of you thast are having video problems, can you see the first screen at all. If you can make sure you go in to your bios and change the video to AGP. Yes I know that you don't have a AGP slot but MSI considers that on board video junk a AGP graphics card, I guess. Any way MSI says on their page realease for the ms-6378 that only Version 2.1 supports Athlon 1800 XP cpu's. My book says the one I have does. What gives?????? I amn tired of frequent lock ups. I has nothing to do with heat. It can lock on boot up or sometimes after 12 hours of sitting here. SOme please help me. If anyone needs help let me know. May I hqave been through that as well and can help.

Hey buddy, I have a similiar problem with my computer.  What happens is that my CPU overheats extremely bad and locks up.  I don't know what's happening.  My computer is a MSI board, not sure which since I sold it already with a T-Bird 800.  It say in the bios that the heat is as high as 55 C or 110 F.  I been using my system for 2 years now (sometimes I leave it on 24/7), and it just suddenly happened one day.  I know it doesn't have anything to do with my CPU or FAN, cause I replaced both of those (I also use termal grease).  I was using Windows XP, than I switched back to Windows 98 SE, same thing happen.  Sometimes I just want to boot up and it will lock up.  I would format and it would lock up half way too.  If anyone knows whats happened to my computer, please let me know! Thanks.

Similar Messages

  • What locks are required on a table when Oracle is processing an UPDATE

    What locks are required on a table when Oracle is processing an
    UPDATE statement?

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version.
    >
    What locks are required on a table when Oracle is processing an
    UPDATE statement?
    >
    Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
    >
    Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
    >
    The above describes the locks when you, the user, tells Oracle to lock the row.

  • Version 12 does not load. ver 11 works ok. what's wrong??

    I have xp. do not have service packs.
    newest version 12 does not load, but instead reverts back to ver 11.
    What's wrong?? Can i disable ver 12 from loading everytime i load firefox?

    thanks for the reply.
    the integration manager would be helpful if the installation of the "Crystal Reports Basic 2008 for SAP Business One" (version 12)
    would install all required dll's, but its not... 
    I think maybe I was not clear enough, I will try to explain better:
    the problem is that after the installation, I don't see the required dll's in VB6 references and components.
    I need to add reference to the CRVIEWER.dll and add the designer craxdui.dll and several more files that are not installed in that version of crystal and I don't know why...?
    these files ARE installed fine in "Crystal reports XI developer edition" (ver 11.5), so I can add and edit crystal files inside VB6. the problem is I need them in version 12...
    Thanks

  • New IPhone  ver  1.1.2    what is in this new feature

    Can anyone explain what is this new vers 1.1.2 for IPhone?

    I just accepted this update, and it killed any audio through the wired headphones. I can use the phone and speakerphone fine for calls and music, but when i plug in the headphones, dead silence.
    Anyone else have this? I'm going to be nuts trying to work tomorrow.
    Is there a way to revert?

  • I'm running V-6.0 And am trying to fix my add-ons and your web site keeps telling me I'm running Ver.- 3.0.16 Whats the problem?

    Trying to download the compatibility reporter and it says I'm running Ver. 3.0.16 and that I need Ver. 9.0a1. What???? I just upgraded to Ver. 6.0 also when I tried to submit feedback It said I needed to upgrade to Ver. 6.0 but I already did!!! I think it might be time to try Google Chrome! All the people I recommended firefox to are no longer using it because their add-ons no longer work. Running Windows XP

    Make sure iTunes is up to date and try again.

  • Hi. I have an iphone 3gs ios vers 4.1 it was locked to Vodafone but I had them unlock it. Can I update to ios vers 6 and will it still be unlocked. Most apps need vers 4.3 or higher to download. Thanks

    Hi, I am new to this forum so please excuse anything I may say that sounds a bit stupid but I am not very technically minded.
    I have got an iPhone 3gs ios version 4.1. The phone was locked to Vodafone and I asked them to unlock it which they did. I connected the phone to iTunes and it said congratulations your phone is now unlocked. My new Tesco sim card was accepted and the phone works fine. I have tried to download some apps but they all seem to need a higher version of the ios. iTunes says there is an update for my phone ios version 6. I need to know if I update my phone to this version will my phone still be unlocked and also will the phone continue to work properley. Hope someone can help.
    Thanks DaveB

    Happy to have been of help. Hope all goes smoothly.
    BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    and
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards.

  • What lock does the Update Statement use?

    Hi All,
    Does the below statement will put a row level lock or exclusive lock.
    update employee set emp_name='Emp1' where emp_id=1;
    Regards
    W

    UKJA@ukja102> drop table t1 purge;
    Table dropped.
    Elapsed: 00:00:00.93
    UKJA@ukja102> create table t1(c1 int);
    Table created.
    Elapsed: 00:00:00.09
    UKJA@ukja102>
    UKJA@ukja102> insert into t1 values(1);
    1 row created.
    Elapsed: 00:00:00.00
    UKJA@ukja102> commit;
    Commit complete.
    Elapsed: 00:00:00.03
    UKJA@ukja102>
    UKJA@ukja102> update t1 set c1 = 2;
    1 row updated.
    Elapsed: 00:00:00.00
    UKJA@ukja102>
    UKJA@ukja102> set serveroutput on
    UKJA@ukja102>
    UKJA@ukja102> col sid new_value my_sid
    UKJA@ukja102>
    UKJA@ukja102> select sid
      2  from v$mystat where rownum = 1
      3  ;
           SID                                                                                                                                                                                             
           139                                                                                                                                                                                             
    Elapsed: 00:00:00.03
    UKJA@ukja102>
    UKJA@ukja102> exec print_table('select * from v$lock where sid = &my_sid');
    ADDR                          : 695C4224                                                                                                                                                               
    KADDR                         : 695C423C                                                                                                                                                               
    SID                           : 139                                                                                                                                                                    
    TYPE                          : TM                                                                                                                                                                     
    ID1                           : 74212                                                                                                                                                                  
    ID2                           : 0                                                                                                                                                                      
    LMODE                         : 3                                                                                                                                                                      
    REQUEST                       : 0                                                                                                                                                                      
    CTIME                         : 0                                                                                                                                                                      
    BLOCK                         : 0                                                                                                                                                                      
    ADDR                          : 69612444                                                                                                                                                               
    KADDR                         : 69612560                                                                                                                                                               
    SID                           : 139                                                                                                                                                                    
    TYPE                          : TX                                                                                                                                                                     
    ID1                           : 458787                                                                                                                                                                 
    ID2                           : 13053                                                                                                                                                                  
    LMODE                         : 6                                                                                                                                                                      
    REQUEST                       : 0                                                                                                                                                                      
    CTIME                         : 0                                                                                                                                                                      
    BLOCK                         : 0                                                                                                                                                                      
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.14DML acquires TX lock in exclusive(6) mode(row level lock) and TM lock in row exclusive(3) mode.
    =======================================
    Oracle Performance Storyteller
    Dion Cho
    http://ukja.tistory.com
    http://wiki.ex-em.com/index.php/performance_in_depth
    http://wiki.ex-em.com/index.php/optimizing_oracle_optimizer
    =======================================

  • Icon for saved passwords is missing, as are the passwords in ver 8.0. What happened? I have Norton 360, too.

    The feature does work for IE, and did for the previous version of Firefox. When I upgraded, it disappeared. I have checked tools, options, security and the appropriate boxes are checked.

    Make sure are using Norton 360 v5?
    * http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-8-Support-for-Norton-Toolbar/td-p/581516

  • IPhoto ver. 8.1.2 locks up after opening

    I am new to Mac and have recently bought a MacBook Pro with SN and iPhoto installed.
    I recently completed downloading my jpg file photographs to iPhoto from files from a CD ROM and then I added some photos from a SD card from my camera.
    iPhoto worked OK for a short period, but now if I open it from the dock it opens fine, but attempting to open any function causes the program to freeze and the only way I can get out of it is to use hold Cmd-Opt-shift-Esc for much longer than four seconds.
    All the while the program has frozen I have the circular busy cursor running and I cannot open any other programs or carry out any other actions in iPhoto.
    Can anyone offer any advise, please?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • MS-6378 Ver 3

     I have the above stated motherbiard, I need to find out how to hook up the power plugs(from the tower) to the mainboard, I have tried to download the manual, but no such luck. There is no indication on the pins to direct which is pw, reset hdd, ect ect, doses anyone know how or could supply with a picture of the manual setup?

    here the link for the MB
    MS-6378

  • I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

    I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

    What "locking function" are you talking about?

  • Cannot back up to iCloud.  get message my device has not been backed up in 14 weeks you need to be connected to wifi, plugged in and locked"  I am all three.  I am plugged into the wall via my charger,  my wifi is on and i have a pass code what else?

    New to iCloud.  I only bought the storage to stop getting not enough storage messages.  Now I can't back up to iCloud.  I get the message "you have not backed up this device in 14 weeks, your device needs to be connected to wifi, locked and plugged in"  I connected to wifi and am sitting with my phone about 10" from my modem.  I am plugged into my charger which is plugged into the wall.  I created a passcode for my phone as I an guessing thats what locked means.  However if I am locked I cannot get into the phone to see if it is backing up.  So I ask it to back up then let it go off to lock, give it 5 or 10 min to back up and then get back into it only to find its still on estimating time remaining.  It won't go any further then that..  What am I doing wrong??

    This may not solve your problem but may clear up a couple of things.
    1: Re the connected to wi-fi, plugged in and locked thing is for automatic backups. It doesn't need to be plugged in or locked for it to work when you go to Settings > iCloud > Backup and tap Back Up Now. Mine completes the backup quickly without being plugged in or locking (but I don't have a lot to backup).
    2: Locked just means the lock screen is on (press the sleep/wake button on top) -- it will work without a passcode (& again, the lock screen on is only required for the automatic backup).
    3: You can see what is using your storage and maybe reduce some of it so that you don't have to pay for storage. Instructions in Manage your iCloud storage - Apple Support

  • What will happen when I lock a view?

    When I lock a view using lock table* statement, what will happen?*
    Is the view get locked?
    Or all the base tables are locked from which view is created?
    Or no lock is applied?
    :D

    OrionNet wrote:
    Sohil,
    Exact what lock statement you are using.
    If following statement used, then you will able to query (select) both the table and view.
    ??? Oracle table lock never keeps other users from querying a table, and a query never acquires a table lock. So I am not sure what were you trying to say. Anyway, locking a view locks all base tables:
    SQL> create or replace
      2  view emp_dept_vw
      3  as
      4  select ename,dname
      5  from emp e,dept d
      6  where d.deptno = e.deptno;
    View created.
    SQL> select object_name
      2  from user_objects
      3  where object_id in(select id1 from v$lock where sid=(select sid from v$mystat where rownum=1))
      4  /
    no rows selected
    SQL> lock table emp_dept_vw in share update mode;
    Table(s) Locked.
    SQL> select object_name
      2  from user_objects
      3  where object_id in(select id1 from v$lock where sid=(select sid from v$mystat where rownum=1))
      4  /
    OBJECT_NAME
    DEPT
    EMP
    SQL> SY.

  • Version 10 installed but at various times converts back to ver 3. What can be done to keep ver 10 intact?

    I have installed FireFox Ver.10 numerous times but at various times, perhaps after using for several days, it will somehow revert back to Ver. 3. What is happening and how do I fix it?

    Which security software (firewall, anti-virus) do you have?
    Some security software has virtualization features that can restore files in the Firefox profile folder.

  • What is the silent switch for ver 9.x adobe_updater.exe?

    I simply want to update all of my 750 PC's to current versions of adobe reader and acrobat.  I have version 9.x of both.  My clients don't have admin rights so I'm hoping that someone at adobe or in practice can pass along the switch to run the updater via the Windows Task Scheduler.  I've seen one example, but I can't get it to work silently.  Also tried /quiet
    "%commonprogramfiles%\adobe\updater6\adobe_updater.exe" -AU_LAUNCH_MODE=1 -AU_DISPLAY_LANG=en_US -AU_LAUNCH_APPID=reader9rdr-en_US
    I can run the updater but not silently.
    Also hoping that adobe will update their customization wizard to support ver X.  thanks Dennis

    Exactly what I want to do, I've about given up on adobe, I've posted the same type ? on their web site 2 months ago and no one from adobe replied.  I've had our software reseller try forwarding the same ? to someone in adobe, if I get anything back I will pass along.  Thanks Dennis
    ===============================================================================
    Subject: So the ? of the month is, can we actually find a real person at adobe that can answer some very basic ?'s
    I’ve given up on their overseas support and tried posting a ? on their web site (which no one from adobe would answer), that was in the e-mail that Charlotte passed along to you.
    Does adobe have a method to provide unattended SILENT updates to their reader/acrobat.  i.e. they have a method in place if you have admin rights called Acrobat-Reader Update.  So since 90% of my clients don’t have admin rights, my thinking was if they have a silent switch on that update process I could run a weekly job to apply updates.  So far getting anyone to either say yes or no has been futile (normal for adobe).
    So to be clear, my goal is to install reader 10.x and acrobat 10.x on all my 750 MIR desktops and I am looking for a way to easily update those PC’s as updates/patches come out from adobe, but I have to do it in a batch job running with admin rights silently.  So can we find anyone from Adobe that can either say yes here is the silent switch or say no the only method is as follows!
    After 9.2 the following is installed on desktops:
    cid:[email protected]
    The AdobeARM.exe updater works fine, but you have to be logged onto the PC with admin rights, it then downloads the updates, but then you have to again be logged on with admin rights and double click and apply them via the GUI screens.  That would make sense if you had 10 PC’s and each person had admin rights, but that is not at all the corporate world.  I have 2 people maintaining 750 PC’s and very few clients have admin rights, so our focus is how to make these updates happen regularly without having to physically access the PC’s.
    Dennis Bury
    Systems Manager
    Mallinckrodt Institute of Radiology
    Washington University School of Medicine
    4525 Scott Ave, Suite 3200
    St. Louis, MO 63110
    office 314-362-8666
    Cell 314-707-0009

Maybe you are looking for